Search NASA⌕ Search

SEARCH · Search NASA

Results for “Coordinate transformations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

A geometric derivation of Kane's equations

A geometrically-based derivation of Kane's dynamical equations is presented. Equations for both holonomic and nonholonomic systems are derived by considering the system's motion in a hypersurface determined from the equations relating Cartesian to generalized coordinates. Using vector space methods, the equations of motion are projected onto the tangent plane to the hypersurface. In the course of this construction, a requirement on the transformation between generalized and Cartesian coordinates is revealed that is often overlooked. This restriction is then shown to be a necessary and sufficient condition for the invertibility of the coefficient matrix of the generalized accelerations appearing in Kane's dynamical equations. Although less succinct than the traditional approach, the present derivation offers some insight into the physics embodied in Kane's equations and appears as a natural generalization of methods used in elementary problems.

Storch, Joel↗

Ocean Turbulence V: Mesoscale Modeling in Level Coordinates. The Effect of Random Nature of Density

The main result of this paper is the derivation of a new expression for the tracer subgrid term in level coordinates S(l) to be employed in O-GCM. The novel feature is the proper account of the random nature of the density field which strongly affects the transformation from isopycnal to level coordinates of the variables of interest, velocity and tracer fields, their correlation functions and ultimately the subgrid terms. In deriving our result we made use of measured properties of vertical ocean turbulence. The major new results are: 1) the new subgrid expression is different from that of the heuristic GM model, 2) u++(tracer)=1/2u+(thickness), where u++ and u+ are the tracer and thickness bolus velocities. In previous models, u++ = u+, 2) the subgrid for a tracer tau is not the same as that for the density rho even when one accounts for the obvious absence of a diffusion term in the latter. The difference stems from a new treatment of the stochastic nature of the density, 3) the mesoscale diffusivity enters both locally and non-locally, as the integral over all z's from the bottom of the ocean to the level z.

Canuto, V. M.↗

Programmable remapper for image processing

A video-rate coordinate remapper includes a memory for storing a plurality of transformations on look-up tables for remapping input images from one coordinate system to another. Such transformations are operator selectable. The remapper includes a collective processor by which certain input pixels of an input image are transformed to a portion of the output image in a many-to-one relationship. The remapper includes an interpolative processor by which the remaining input pixels of the input image are transformed to another portion of the output image in a one-to-many relationship. The invention includes certain specific transforms for creating output images useful for certain defects of visually impaired people. The invention also includes means for shifting input pixels and means for scrolling the output matrix.

Juday, Richard D.↗

VLSI architectures for geometrical mapping problems in high-definition image processing

This paper explores a VLSI architecture for geometrical mapping address computation. The geometric transformation is discussed in the context of plane projective geometry, which invokes a set of basic transformations to be implemented for the general image processing. The homogeneous and 2-dimensional cartesian coordinates are employed to represent the transformations, each of which is implemented via an augmented CORDIC as a processing element. A specific scheme for a processor, which utilizes full-pipelining at the macro-level and parallel constant-factor-redundant arithmetic and full-pipelining at the micro-level, is assessed to produce a single VLSI chip for HDTV applications using state-of-art MOS technology.

Kim, K.↗

Global coordinates with centimeter accuracy in the International Terrestrial Reference Frame using GPS

Using 21 days of GPS data from 21 globally distributed receivers operating during early 1991, a 7-parameter transformation between a GPS free-network solution and coordinates of 12 stations listed in the International Terrestrial Reference Frame (ITRF) is solved. Standard errors of GPS coordinates are derived by applying an orthogonal projection operator to the free-network covariance. The weighted rms difference between 33 transformed GPS and ITRF coordinates is 12 mm in the Northern Hemisphere. Best results are obtained by mapping ITRF coordinates to the epoch of this experiment assuming no vertical site motions. Fixing selected sites in the GPS solution to ITRF '90 does not improve the agreement. It is concluded that the use of fiducial constraints is unnecessary for global networks.

Blewitt, Geoffrey↗

Nonlocality of Foldy-Wouthuysen and related transformations for the Dirac equation

Nonlocalities of Foldy-Wouthuysen and related transformations, which are used to separate positive- and negative-energy states in the Dirac equation, are investigated. Second moments of functional kernels generated by the transformations are calculated, and the transformed functions and their variances are computed. It is shown that all the transformed quantities are smeared in the coordinate space by an amount comparable to the Compton wavelength {lambda}{sub c}=({Dirac_h}/2{pi})/mc.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Testing the PV-Theta Mapping Technique in a 3-D CTM Model Simulation

Mapping lower stratospheric ozone into potential vorticity (PV)- potential temperature (Theta) coordinates is a common technique employed to analyze sparse data sets. Ozone transformed into a flow-following dynamical coordinate system is insensitive to meteorological variations. Therefore data from a wide range of times/locations can be compared, so long as the measurements were made in the same airmass (as defined by PV). Moreover, once a relationship between ozone and PV/Theta is established, a full 3D ozone field can be estimated from this relationship and the 3D analyzed PV field. However, ozone data mapped in this fashion can be hampered by noisy PV fields, or "mis-matches" in the resolution and/or exact location of the ozone and PV measurements. In this study, we investigate the PV-ozone relationship using output from a recent 50-year run of the Goddard 3D chemical transport model (CTM). Model constituents are transported using off-line dynamics from the finite volume general circulation model (FVGCM). By using the internally consistent model PV and ozone fields, we minimize noise due to mis-matching and resolution issues. We calculate correlations between model ozone and PV throughout the stratosphere, and test the sensitivity of the technique to initial data resolution. To do this we degrade the model data to that of various satellite instruments, then compare the mapped fields derived from the sub-sampled data to the full resolution model data. With these studies we can determine appropriate limits for the PV-theta mapping technique in latitude, altitude, and as a function of original data resolution.

Frith, Stacey M.↗

Hand-Eye Calibration of Robonaut

NASA's Human Space Flight program depends heavily on Extra-Vehicular Activities (EVA's) performed by human astronauts. EVA is a high risk environment that requires extensive training and ground support. In collaboration with the Defense Advanced Research Projects Agency (DARPA), NASA is conducting a ground development project to produce a robotic astronaut's assistant, called Robonaut, that could help reduce human EVA time and workload. The project described in this paper designed and implemented a hand-eye calibration scheme for Robonaut, Unit A. The intent of this calibration scheme is to improve hand-eye coordination of the robot. The basic approach is to use kinematic and stereo vision measurements, namely the joint angles self-reported by the right arm and 3-D positions of a calibration fixture as measured by vision, to estimate the transformation from Robonaut's base coordinate system to its hand coordinate system and to its vision coordinate system. Two methods of gathering data sets have been developed, along with software to support each. In the first, the system observes the robotic arm and neck angles as the robot is operated under external control, and measures the 3-D position of a calibration fixture using Robonaut's stereo cameras, and logs these data. In the second, the system drives the arm and neck through a set of pre-recorded configurations, and data are again logged. Two variants of the calibration scheme have been developed. The full calibration scheme is a batch procedure that estimates all relevant kinematic parameters of the arm and neck of the robot The daily calibration scheme estimates only joint offsets for each rotational joint on the arm and neck, which are assumed to change from day to day. The schemes have been designed to be automatic and easy to use so that the robot can be fully recalibrated when needed such as after repair, upgrade, etc, and can be partially recalibrated after each power cycle. The scheme has been implemented on Robonaut Unit A and has been shown to reduce mismatch between kinematically derived positions and visually derived positions from a mean of 13.75cm using the previous calibration to means of 1.85cm using a full calibration and 2.02cm using a suboptimal but faster daily calibration. This improved calibration has already enabled the robot to more accurately reach for and grasp objects that it sees within its workspace. The system has been used to support an autonomous wrench-grasping experiment and significantly improved the workspace positioning of the hand based on visually derived wrench position. estimates.

Nickels, Kevin↗

Polarization Behavior of Water in Extreme Aqueous Environments: A molecular dynamics study based on the Gaussian Charge Polarizable Water Model.

We study the polarization behavior of water under geologically-relevantextreme aqueous environments along four equidistant supercriticalisotherms, 773 ! T (K) ! 1373, and over a wide pressure range,0 < P(GPa) ! 30 , by isobaric-isothermal molecular dynamics simulationsof the Gaussian Charge Polarizable (GCP ) water model, to unravel anddiscuss the underlying link between two precisely defined orientationalorder parameters and the magnitude of the average induced dipole momentof water. The predicted behavior indicates an isothermal linear dependence(a) between the magnitude of the average induced dipole moment μind andthe average system density ! , (b) between the magnitude of the averageinduced dipole μind and that of the total dipole μtot , resulting from (c) acompensating (inverse) dependence between the permanent-to-induceddipolar angle ! and the magnitude of the average induced dipole momentμind . Moreover, we interpret this behavior in terms of the evolution of thestate dependent tetrahedral order parameter qT and the correspondingbond-order parameter Q6 , supplemented by the microstructural analysisbased on the three site-site radial distribution functions of water and thedistance-ranked nearest-neighbors distributions. Finally, we show thatwhile water exhibits a dramatic microstructural transformation from anopen four-coordinated hydrogen-bonded network at normal conditions to a quasi close-packed coordination, it still preserves a significant degree of hydrogen bonding.

08 HYDROGEN↗

Hyperspherical Sparse Approximation Techniques for High-Dimensional Discontinuity Detection

This work proposes a hyperspherical sparse approximation framework for detecting jump discontinuities in functions in high-dimensional spaces. The need for a novel approach results from the theoretical and computational inefficiencies of well-known approaches, such as adaptive sparse grids, for discontinuity detection. Our approach constructs the hyperspherical coordinate representation of the discontinuity surface of a function. Then sparse approximations of the transformed function are built in the hyperspherical coordinate system, with values at each point estimated by solving a one-dimensional discontinuity detection problem. Due to the smoothness of the hypersurface, the new technique can identify jump discontinuities with significantly reduced computational cost, compared to existing methods. Several approaches are used to approximate the transformed discontinuity surface in the hyperspherical system, including adaptive sparse grid and radial basis function interpolation, discrete least squares projection, and compressed sensing approximation. Moreover, hierarchical acceleration techniques are also incorporated to further reduce the overall complexity. In conclusion, rigorous complexity analyses of the new methods are provided, as are several numerical examples that illustrate the effectiveness of our approach.

97 MATHEMATICS AND COMPUTING↗

Lensing in the geodesic light-cone coordinates and its (exact) illustration to an off-center observer in Lemaȋtre-Tolman-Bondi models

We present in this paper a new application of the geodesic light-cone (GLC) gauge for weak lensing calculations. Using interesting properties of this gauge, we derive an exact expression of the amplification matrix—involving convergence, magnification and shear—and of the deformation matrix—involving the optical scalars. These expressions are simple and non-perturbative as long as no caustics are created on the past light-cone and are, by construction, free from the thin lens approximation. We apply these general expressions on the example of an Lemaȋtre-Tolman-Bondi (LTB) model with an off-center observer and obtain explicit forms for the lensing quantities as a direct consequence of the non-perturbative transformation between GLC and LTB coordinates. We show their evolution in redshift after a numerical integration, for underdense and overdense LTB models, and interpret their respective variations in the simple non-curvature case.

79 ASTRONOMY AND ASTROPHYSICS↗

A new method to real-normalize measured complex modes

A time domain subspace iteration technique is presented to compute a set of normal modes from the measured complex modes. By using the proposed method, a large number of physical coordinates are reduced to a smaller number of model or principal coordinates. Subspace free decay time responses are computed using properly scaled complex modal vectors. Companion matrix for the general case of nonproportional damping is then derived in the selected vector subspace. Subspace normal modes are obtained through eigenvalue solution of the (M sub N) sup -1 (K sub N) matrix and transformed back to the physical coordinates to get a set of normal modes. A numerical example is presented to demonstrate the outlined theory.

Wei, Max L.↗

NXREFINE

NXRefine implements a complete workflow for both data acquisition and reduction of single crystal diffuse x-ray scattering collected as a series of area detector frames during continuous sample rotation. The data are stored in HDF5 files, which conform to the NeXus data format standard. These files contain a comprehensive set of metadata, including the incident wavelength, powder calibration scans used to define detector distances, beam centers, and yaw, pitch, and roll corrections. Automated peak searches of the three-dimensional data arrays define a set of Bragg peaks that are used to define an orientation matrix, defined according to Busing and Levy, which is then used to transform the data from angular coordinates to reciprocal space coordinates using the CCTW program. Multiple rotations at different detector translations and offset rotation axes are combined to ensure that there are no gaps in the reconstructed data, and allow the construction of masks to eliminate detector artifacts due to Compton scattering within the sensor layers. Finally, the data can be transformed into 3D-ΔPDF maps using the punch-and-fill method after symmetrization.

OSBORN, RAYMOND↗

SU-E-T-570: New Quality Assurance Method Using Motion Tracking for 6D Robotic Couches

Purpose: To accommodate geometrically accurate patient positioning, a robotic couch that is capable of 6-degrees of freedom has been introduced. However, conventional couch QA methods are not sufficient to enable the necessary accuracy of tests. Therefore, we have developed a camera based motion detection and geometry calibration system for couch QA. Methods: Employing a Visual-Tracking System (VTS, BonitaB10, Vicon, UK) which tracks infrared reflective(IR) markers, camera calibration was conducted using a 5.7 × 5.7 × 5.7 cm{sup 3} cube attached with IR markers at each corner. After positioning a robotic-couch at the origin with the cube on the table top, 3D coordinates of the cube’s eight corners were acquired by VTS in the VTS coordinate system. Next, positions in reference coordinates (roomcoordinates) were assigned using the known relation between each point. Finally, camera calibration was completed by finding a transformation matrix between VTS and reference coordinate systems and by applying a pseudo inverse matrix method. After the calibration, the accuracy of linear and rotational motions as well as couch sagging could be measured by analyzing the continuously acquired data of the cube while the couch moves to a designated position. Accuracy of the developed software was verified through comparison with measurement data when using a Laser tracker (FARO, Lake Mary, USA) for a robotic-couch installed for proton therapy. Results: VTS system could track couch motion accurately and measured position in room-coordinates. The VTS measurements and Laser tracker data agreed within 1% of difference for linear and rotational motions. Also because the program analyzes motion in 3-Dimension, it can compute couch sagging. Conclusion: Developed QA system provides submillimeter/ degree accuracy which fulfills the high-end couch QA. This work was supported by the National Research Foundation of Korea funded by Ministry of Science, ICT & Future Planning. (2013M2A2A7043507 and 2012M3A9B6055201)

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Modeling of stochastic broadening in a poloidally diverted discharge with piecewise analytic symplectic mapping flux functions

A highly accurate calculation of the magnetic field line Hamiltonian in DIII-D [J. L. Luxon and L. E. Davis, Fusion Technol. 8, 441 (1985)] is made from piecewise analytic equilibrium fit data for shot 115467 3000 ms. The safety factor calculated from this Hamiltonian has a logarithmic singularity at an ideal separatrix. The logarithmic region inside the ideal separatrix contains 2.5% of toroidal flux inside the separatrix. The logarithmic region is symmetric about the separatrix. An area-preserving map for the field line trajectories is obtained in magnetic coordinates from the Hamiltonian equations of motion for the lines and a canonical transformation. This map is used to calculate trajectories of magnetic field lines in DIII-D. The field line Hamiltonian in DIII-D is used as the generating function for the map and to calculate stochastic broadening from field-errors and spatial noise near the separatrix. A very negligible amount (0.03%) of magnetic flux is lost from inside the separatrix due to these nonaxisymmetric fields. It is quite easy to add magnetic perturbations to generating functions and calculate trajectories for maps in magnetic coordinates. However, it is not possible to integrate across the separatrix. It is also difficult to find the physical position corresponding to magnetic coordinates. For open field lines, periodicity in the poloidal angle is assumed, which is not satisfactory. The goal of this paper is to demonstrate the efficacy of the symplectic mapping approach rather than using realistic DIII-D parameters or modeling specific experimental results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Canonical transformation for trapped/passing guiding-center orbits in axisymmetric tokamak geometry

The generating function for the canonical transformation from the parallel canonical coordinates (s,p{sub ||}) to the action-angle coordinates (ζ, J) for trapped/passing guiding-center orbits in axisymmetric tokamak geometry is presented. Drawing on the analogy between the phase-space portraits of the librating/rotating pendulum and the trapped/passing guiding-center orbits, the generating function is expressed in terms of the Jacobi zeta function, which can then readily be used to obtain an explicit expression for the bounce-center transformation for trapped/passing-particle guiding-center orbits in axisymmetric tokamak geometry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modification of Lie's transform perturbation theory for charged particle motion in a magnetic field

It is pointed out that the conventional Lie transform perturbation theory for the guiding center motion of charged particles in a magnetic field needs to be modified for ordering inconsistency. There are two reasons. First, the ordering difference between the temporal variation of gyrophase and that of the other phase space coordinates needs to be taken into account. Second, it is also important to note that the parametric limit of the derivative of a function is not equivalent to the derivative of the limit function. When these facts are taken into account, the near identity transformation rule for one form related to the Lagrangian is modified. With the modified near identity transformation rule, the drift motion of charged particles can be described in the first order, instead of the second order and beyond through a tedious expansion process as in the conventional formulation. Here, this resolves the discrepancy between the direct and Lie transform treatments in the Lagrangian perturbation theory for charged particle motion in a magnetic field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Which electromagnetic equations apply in rotating coordinates

It was discovered some years ago by Schiff that two equations for fields in vacuum do not carry over without change from an inertial frame to a frame with rotating axes of space coordinates, even for a region with all velocities much lower than the speed of light. However, the belief that all four of the field equations are invariant under such conditions is still prevalent and causes misconceptions in physical applications, including astrophysical and geophysical ones. The purpose of the present paper is therefore to call attention to Schiff's discovery, discussing its basis and its extension to fields in material media, and to interpret the additional terms that must be added to the equations in order to obtain valid transformations to rotating axes of coordinates.

Webster, D. L.↗