Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Synthesis, structural and vibrational properties of Bi{sub 0.8}La{sub 0.15}A{sub 0.05}FeO{sub 3} (A = Ca, Sr)

The polycrystalline Bi{sub 0.8}La{sub 0.15}A{sub 0.05}FeO{sub 3} (A = Ca, Sr) was synthesized by solid state reaction route to study the structural and vibrational properties. X-ray diffraction patterns confirmed the formation of single-phase perovskite structure. Rietveld–refined crystal structure parameters revealed the existence of rhombohedral R3c symmetry in the prepared sample. The blue shift of phonon modes is attributed to lower atomic mass of La{sup 3+} and A = (Ca, Sr) substitution at Bi site in BiFeO{sub 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fiber diffraction of skin and nails provides an accurate diagnosis of malignancies

An early diagnosis of malignancies correlates directly with a better prognosis. Yet for many malignancies there are no readily available, noninvasive, cost-effective diagnostic tests with patients often presenting too late for effective treatment. This article describes for the first time the use of fiber diffraction patterns of skin or fingernails, using X-ray sources, as a biometric diagnostic method for detecting neoplastic disorders including but not limited to melanoma, breast, colon and prostate cancers. With suitable further development, an early low-cost, totally noninvasive yet reliable diagnostic test could be conducted on a regular basis in local radiology facilities, as a confirmatory test for other diagnostic procedures or as a mass screening test using suitable small angle X-ray beam-lines at synchrotrons.

43 PARTICLE ACCELERATORS↗

Debranching and Crystallization of Waxy Maize Starch in Relation to Enzyme Digestibility

Molecular and crystal structures as well as morphology during debranching and crystallization of waxy maize starch at a high solid content (25%, w/w) were investigated, and the results were related to the digestibility of debranched products. The starch was cooked at 115-120 C for 10 min, cooled to 50 C and debranched by isoamylase. After 1 h of debranching, wormlike objects with 5-10 nm width and ca. 30 nm length were observed by transmission electron microscopy. Further release of linear chains and crystallization led to assembly of semi-crystalline structures in the form of nano-particles and subsequent growth of nano-particles into large aggregates. After 24 h at 50 C, a debranched starch product with an A-type X-ray diffraction pattern, a high melting temperature (90-140 C), and high resistant starch content (71.4%) was obtained. Small-angle X-ray scattering results indicated that all debranched products were surface fractal in a dry state (4% moisture) but had a mass fractal structure when hydrated (e.g. 45% moisture).

59 BASIC BIOLOGICAL SCIENCES↗

Investigation of (110) SnO{sub 2} growth mechanisms on TiO{sub 2} substrates by plasma-assisted molecular beam epitaxy

We investigated the growth mechanisms of (110) SnO{sub 2} on (110) TiO{sub 2} by varying tin fluxes under a fixed oxygen pressure by plasma-assisted molecular beam epitaxy. A growth diagram was constructed that consists of two distinct growth regimes: an increase in growth rates in an oxygen-rich environment and a decrease in growth rates in a tin-rich environment. The excess tin played an important role for the unexpected decreasing growth rate in a tin-rich regime. Without a buildup of the tin adlayer coverage, the accumulation of macroscopic tin droplets on the SnO{sub 2} film surface was confirmed by the spotty high energy electron diffraction pattern and the absence of intensity oscillations. No SnO{sub 2} growth was observed when the impinging tin flux was larger than twice the stoichiometric tin flux, suggesting that all active oxygen atoms were consumed by evaporated tin atoms to form volatile tin suboxide (SnO). The formation of volatile SnO, causing the decreasing growth rate in a tin-rich condition, was monitored by in situ quadrupole mass spectrometry.

36 MATERIALS SCIENCE↗

Ferroelectric domain structures in <001>-oriented K{sub 0.15}Na{sub 0.85}NbO{sub 3} lead-free single crystal

In this work, ferroelectric domain structures of <001 >-oriented K{sub 0.15}Na{sub 0.85}NbO{sub 3} single crystal are characterized. Transmission electron microscopy (TEM) observation revealed high-density of laminate domain structures in the crystal and the lattices of the neighboring domains are found to be twisted in a small angle. Superlattice diffraction spots of 1/2 (eeo) and 1/2 (ooe) in electron diffraction patterns are observed in the crystal, revealing the a{sup +}a{sup +}c{sup −} tilting of oxygen octahedral in the perovskite structure. The piezoresponse of domains and in-situ poling responses of K{sub 0.15}Na{sub 0.85}NbO{sub 3} crystal are observed by piezoresponse force microscopy (PFM), and the results assure its good ferroelectric properties.

36 MATERIALS SCIENCE↗

Simultaneous imaging and diffraction in the dynamic diamond anvil cell

The ability to visualize a sample undergoing a pressure-induced phase transition allows for the determination of kinetic parameters, such as the nucleation and growth rates of the high-pressure phase. For samples that are opaque to visible light (such as metallic systems), it is necessary to rely on x-ray imaging methods for sample visualization. Here, we present an experimental platform developed at beamline P02.2 at the PETRA III synchrotron radiation source, which is capable of performing simultaneous x-ray imaging and diffraction of samples that are dynamically compressed in piezo-driven diamond anvil cells. This setup utilizes a partially coherent monochromatic x-ray beam to perform lensless phase contrast imaging, which can be carried out using either a parallel- or focused-beam configuration. The capabilities of this platform are illustrated by experiments on dynamically compressed Ga and Ar. Melting and solidification were identified based on the observation of solid/liquid phase boundaries in the x-ray images and corresponding changes in the x-ray diffraction patterns collected during the transition, with significant edge enhancement observed in the x-ray images collected using the focused-beam. These results highlight the suitability of this technique for a variety of purposes, including melt curve determination.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantifying dislocation density in Al-Cu coatings produced by cold spray deposition

This work quantifies the plastic deformation in terms of dislocation density for a series of cold sprayed Al-Cu coatings with copper contents from 2 mass% to 5 mass%. The success of the deposition and consolidation of the feedstock powders during the cold spray process rely on the occurrence of significant plastic deformation. Inert gas atomized Al-Cu alloy powders were sprayed onto substrates made of an Al-Cu-Mg-Mn alloy (AA2024) to produce dense coatings using a low pressure cold spray system with helium as the carrier gas. X-ray diffraction patterns were obtained from the Al-Cu feedstock powder material and the cold sprayed coatings using a monochromatic X-ray source, and the dislocation density was determined via an X-ray whole profile analysis. Increasing the Cu alloy content (from 2 mass% to 5 mass%) systematically increased the dislocation density in the Al-Cu coatings from (4.3 ± 0.5) × 10 14 m -2 to (7.5 ± 0.8) × 10 14 m -2 . The dislocation densities in the feedstock powders ranging from (0.4 ± 0.1) × 10 14 m -2 to (1.8 ± 0.2) × 10 14 m -2 were all lower than the dislocation densities in the corresponding coatings. The increasing deformation level in the Al-Cu coatings with Cu additions were confirmed by the classic and modified Williamson-Hall analyses of X-ray diffraction data, and peak breadth measurements from neutron diffraction data. Finally, a high density of dislocations was also observed in these coatings via electron backscatter diffraction and transmission electron microscopy.

36 MATERIALS SCIENCE↗

An in-situ study of low thermal expansion and internal stress evolution in FeMn alloys

The mechanism of low thermal expansion phenomenon in antiferromagnetic FeMn alloys needs to be revealed. In this work, the evolution of lattice thermal expansion and internal stress in FeMn alloys was investigated by in-situ synchrotron X-ray diffraction during thermal cycling. Preceding the martensitic transformation, the coefficient of lattice thermal expansion (CLTE) decreased and the full width at half maximum (FWHM) of the diffraction peaks broadened abnormally. The evolution of the lattice thermal expansion and the FWHM were both reversible and isotropic. The additional reflection spots around the fundamental diffraction spots in the electron diffraction patterns of austenite and the dispersed nano-scale martensite embryos in austenite observed in the dark field TEM images proves the existence of premartensitic transformation. Finally, similar phenomena were found in FeMn Invar alloy, which indicate that the Invar effect is closely related to the internal stress evolution caused by premartensitic transformation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effective photocatalytic removal of different dye stuffs using green synthesized zinc oxide nanogranules

Highlights: • Zinc oxide nanoparticles (ZnO-NPs) synthesized by a green strategy using lemon juice and ethylene glycol. • Physicochemical studies confess the formation of hexagonal wurtzite ZnO nanaogranules with some honed faces. • Direct band gap energy obtained for ZnO nano granules was 3.15 eV. • ZnO nano granules act as good catalyst for the photo degradation of methylene blue, congo red, and rhodamine B under UV-light irradiation. - Abstract: Zinc oxide nanoparticles (ZnO-NPs) obtained by a green synthetic strategy using lemon juice and ethylene glycol. The material was characterized using the techniques UV–vis spectroscopy, FTIR spectroscopy, X-ray diffraction analysis, FESEM, EDAX and HRTEM. Diffraction patterns and TEM micrographs confess the formation of hexagonal wurtzite ZnO nanaogranules with some honed faces and having an average size of 49.16 nm. The developed ZnO-NPs was tested for the photocatalytic degradation of Methylene Blue, Congo Red and Rhodamine B target dyes under UV irradiation and found to have remarkable activity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Wurtzite ZnO (001) films grown on cubic MgO (001) with bulk-like opto-electronic properties

We report the growth of ZnO (001) wurtzite thin films with bulk-like opto-electronic properties on MgO (001) cubic substrates using plasma-assisted molecular beam epitaxy. In situ reflection high-energy electron diffraction patterns and ex situ high resolution transmission electron microscopy images indicate that the structure transition from the cubic MgO substrates to the hexagonal films involves 6 ZnO variants that have the same structure but different orientations. This work demonstrates the possibility of integrating wurtzite ZnO films and functional cubic substrates while maintaining their bulk-like properties.

36 MATERIALS SCIENCE↗

Structural and electrical transport properties of La{sub 0.8}Sm{sub 0.05}K{sub 0.15}MnO{sub 3} manganites

Polycrystalline sample of single-phase La{sub 0.8}Sm{sub 0.05}K{sub 0.15}MnO{sub 3} perovskite compound have been synthesized by solid-state reaction route. X-ray diffraction patterns accompanied by Rietveld–refined crystal structure parameters reveal the rhombohedral structure with space group R 3C. Electrical resistivity infers transition from metallic to insulator phase at 537 K. The application of magnetic field of 8 T, suppresses the resistivity. The metallic resistivity is retraced by considering electron–phonon, electron–electron and electron-spin-fluctuation interactions while insulating behaviour is analysed with small polaron conduction model.

36 MATERIALS SCIENCE↗

Structural and magnetic properties of FeNi thin films fabricated on amorphous substrates

FeNi films were fabricated by sputtering and rapid thermal annealing on thermally amorphous substrates to realize the formation of an L1{sub 0}-FeNi phase by a simple method. Structural and magnetic properties of FeNi films were investigated by varying the annealing temperature. L1{sub 0}-FeNi superlattice peaks were not observed in X-ray diffraction patterns, indicating no formation of L1{sub 0}-ordered phase, however, the surface structure systematically changed with the annealing temperature. Magnetization curves also revealed a drastic change depending on the annealing temperature, which indicates the close relation between the morphology and magnetic properties of FeNi films fabricated on amorphous substrates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Two-dimensional antiferromagnetic correlations in an La{sub 1.4}Sr{sub 1.6}(Mn{sub 0.9}Co{sub 0.1}){sub 2}O{sub 7} single crystal

The temperature and field dependences of the magnetization, the electrical resistivity, and the magnetostriction of bilayer lanthanum manganite La{sub 1.4}Sr{sub 1.6}Mn{sub 2}O{sub 7} single crystals and cobalt-doped La{sub 1.4}Sr{sub 1.6}(Mn{sub 0.9}Cu{sub 0.1}){sub 2}O{sub 7} are measured. The magnetostriction of the cobalt-doped compound increases as compared to the initial La{sub 1.4}Sr{sub 1.6}Mn{sub 2}O{sub 7} compound, and the magnetization and the magnetoresistance of the former compound change substantially. Powder and single-crystal neutron diffraction patterns are used to detect ferromagnetic ordering in La{sub 1.4}Sr{sub 1.6}(Mn{sub 0.9}Co{sub 0.1}){sub 2}O{sub 7} at a temperature below T{sub C} ~ 45(2) K, and this ordering coexists with antiferromagnetic correlations, which develop at temperatures below T{sub C} ~ 80(5) K.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The structural state of ultrahigh-molecular-weight polyethylene in single-stage arc-discharge plasma deposition of nanoparticles

We present the results of a study of the structural state of ultrahigh-molecular-weight polyethylene (morphology, X-ray-diffraction patterns, IR spectra) obtained in a single technological cycle combining the synthesis of nanoparticles and their deposition onto the surface of polymer microgranules. Technological conditions for the preservation of the initial state of ultrahigh-molecular-weight polyethylene are found for its presence in the zone of thermal action of the plasma flow. Mechanisms of degradation of the polymer are discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Crystal structure and magnetic properties of titanium-based CuTi{sub 2−x}M{sub x}S{sub 4} and CuCr{sub 2−x}Ti{sub x}Se{sub 4} chalcospinels

CuTi{sub 2−x}M{sub x}S{sub 4} (M=Fe, Mn, Co; x=0.3, 0.5) and CuCr{sub 2−x}Ti{sub x}Se{sub 4} (x=0.3, 0.5, 0.7) chalcospinels were synthesized by conventional solid-state reactions. Their crystal structures were determined by single-crystal X-ray diffraction. All of the phases crystallized in cubic spinel-type structures (space group, Fd3{sup ¯}m). For all of the chalcospinel compounds, the edge-length distortion parameter (ELD) indicated that the most distorted polyhedron was Q[(Ti,M){sub 3}Cu], which displayed an ∼8% distortion from an ideal tetrahedron structure (Q=S or Se). The Mn-based thiospinel CuMn{sub 0.3}Ti{sub 1.7}S{sub 4} is paramagnetic, whereas the Fe-based thiospinels (CuTi{sub 2−x}Fe{sub x}S{sub 4}; x=0.3 and 0.7) are strongly antiferromagnetic due to their spin-glass states. The magnetic susceptibility measurements indicated ferromagnetic behavior for the selenospinels (CuCr{sub 2−x}Ti{sub x}Se{sub 4}; x=0.3, 0.5 and 0.7). - Graphical abstract: View along [1 0 0] of CuCr{sub 2−x}Ti{sub x}Se{sub 4} crystal structure showing tetrahedral and octahedral units. To the right, experimental X-ray powder diffraction pattern of CuCr{sub 1.7}Ti{sub 0.3}Se{sub 4} (top) in compared (in a like-mirror representation) to a simulated X-ray pattern from single-crystal data (bottom). - Highlights: • Chalcogenides belong to the family of compounds spinel-type. • Resolved single crystals of the solid solutions have space group Fd-3m. • The distortion of the tetrahedral and octahedral volume were calculated. • These solid solutions shows a ferromagnetic or spin-glass behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solvothermal synthesis and characterization of a CuInTe{sub 2} absorber for thin-film photovoltaics

Graphical abstract: Display Omitted Highlights: ► We tried to fabricate a CuInTe{sub 2} compound via the solvothermal reaction. ► A resulting sample exhibited the tetragonal crystalline structure of CuInTe{sub 2}. ► The sample showed a wide absorption range from the NIR through the visible region. ► The sample was confirmed to record a favorable absorption coefficient. -- Abstract: A solution-based process was developed for the preparation of a CuInTe{sub 2} material that can be used as an absorber in thin-film photovoltaics. We performed a solvothermal synthesis under specific processing conditions to generate the CuInTe{sub 2} material. The resulting product showed different diffraction patterns and morphology depending on the reaction time and temperature. We optimized the preparation process by investigating the reaction parameters to obtain CuInTe{sub 2} particles with the desired properties. The resulting product exhibited a broad absorption spectrum from the near infrared through the visible region and had a favorable absorption coefficient.

36 MATERIALS SCIENCE↗

Liquid phase synthesis of copper indium diselenide nanoparticles

Nanoparticles of Copper Indium diselenide (CuInSe{sub 2}), belongs to I-III-VI{sub 2} family has been synthesized via liquid phase route using ethylenediamine as a solvent. Characterization of as-grown particles is done by XRD, HRTEM, DLS, optical microscopy and UV-Vis spectroscopy. X-ray diffraction pattern confirmed that the CuInSe2 nanoparticles obtained reveals chalcopyrite structure. Particle size evaluated from dynamic light scattering of as grown particle possessing radius of 90 nm. The bandgap of 1.05eV is obtained from UV-Vis spectrum which will applicable to the solar cell devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Note: Electrochemical cell for in operando X-ray diffraction measurements on a conventional X-ray diffractometer

Electrochemical in operando X-ray diffraction (XRD) is a powerful method to analyze structural changes of energy storage materials while inserting/de-inserting charge carriers, such as Li- or Na-ions, into/from a host structure. The design of an XRD in operando cell is presented, which enables the use of thin (6 μm) aluminum foil as X-ray window as a non-toxic alternative to conventional beryllium windows. Owing to the reduced thickness, diffraction patterns and their changes during cycling can be observed with excellent quality, which was demonstrated for two cathode materials for sodium-ion batteries in a half-cell set-up, P2-Na{sub 0.7}MnO{sub 2} and Na{sub 2.55}V{sub 6}O{sub 16} ⋅ 0.6H{sub 2}O.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗