Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffractive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Observations of Shock-Loaded Tin and Zirconium Surfaces with Single-Pulse X-ray Diffraction

A single-pulse X-ray diffraction (XRD) diagnostic has been developed for the investigation of shocked material properties on a very short time scale. The diagnostic, which consists of a 37-stage Marx bank high-voltage pulse generator coupled to a needle-and-washer electron beam diode via coaxial cable, produces line-and-bremsstrahlung X-ray emission in a 40 ns pulse. The molybdenum anode produces 0.71 Å characteristic K lines used for diffraction. The X-ray beam passes through a pinhole collimator and is incident on the sample with an approximately 2 mm×5 mm spot and 1° full width at half maximum angular divergence. Coherent scattering from the sample produces a Debye-Scherrer diffraction pattern on an image plate located at 75 mm from the polycrystalline sample surface. An experimental study of the polycrystalline structures of zirconium and tin under high-pressure shock loading has been conducted with single-pulse XRD. The experimental targets were 0.1-mm-thick foils of zirconium and tin using 0.4-mm-thick vitreous carbon back windows for shock loading, and the shocks were produced by either Detasheet or PBX-9501 high explosives buffered by 1-mm-thick 6061-T6 aluminum. The diffraction patterns from both shocked zirconium and tin indicated a phase transition into a polymorphic mix of amorphous and new solid phases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Efficient modeling of Bragg coherent x-ray nanobeam diffraction

X-ray Bragg diffraction experiments that utilize tightly focused coherent beams produce complicated Bragg diffraction patterns that depend on scattering geometry, characteristics of the sample, and properties of the x-ray focusing optic. In this paper, we use a Fourier-transform-based method of modeling the 2D intensity distribution of a Bragg peak and apply it to the case of thin films illuminated with a Fresnel zone plate in three different Bragg scattering geometries. Finally, the calculations agree well with experimental coherent diffraction patterns, demonstrating that nanodiffraction patterns can be modeled at nonsymmetric Bragg conditions with this approach—a capability critical for advancing nanofocused x-ray diffraction microscopy.

36 MATERIALS SCIENCE↗

Engineering related neutron diffraction measurements probing strains, texture and microstructure

Neutron diffraction has been used for engineering applications for nearly three decades. The basis of the technique is powder diffraction following Bragg's Law. From the measured diffraction patterns information about internal, or residual, strain can be deduced from the peak positions, texture information can be extracted from the peak intensities, and finally the peak widths can provide information about the microstructure, e.g. dislocation densities and grain sizes. The strains are measured directly from changes in lattice parameters, however, in many cases it is non-trivial to determine macroscopic values of stress or strain from the measured data. The effects of intergranular strains must be considered, and combining the neutron diffraction measurements with polycrystal deformation modeling has proven invaluable in determining the overall stress and strain values of interest in designing and dimensioning engineering components. Furthelmore, the combined use of measurements and modeling has provided a tool for elucidating basic material properties, such as critical resolved shear stresses for the active deformation modes and their evolution as a function of applied deformation.

36 MATERIALS SCIENCE↗

X-Ray Diffraction on NIF

The National Ignition Facility (NIF) is currently a 192 beam, 1.6 MJ laser. NIF Ramp-Compression Experiments have already made the relevant exo-planet pressure range from 1 to 50 Mbar accessible. We Proposed to Study Carbon Phases by X-Ray Diffraction on NIF. Just a few years ago, ultra-high pressure phase diagrams for materials were very 'simple'. New experiments and theories point out surprising and decidedly complex behavior at the highest pressures considered. High pressures phases of aluminum are also predicted to be complex. Recent metadynamics survey of carbon proposed a dynamic pathway among multiple phases. We need to develop diagnostics and techniques to explore this new regime of highly compressed matter science. X-Ray Diffraction - Understand the phase diagram/EOS/strength/texture of materials to 10's of Mbar. Strategy and physics goals: (1) Powder diffraction; (2) Begin with diamond; (3) Continue with metals etc.; (4) Explore phase diagrams; (5) Develop liquid diffraction; and (6) Reduce background/improve resolution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Theory of radial X-ray Diffraction from a Polycrystalline Sample Undergoing Plastic Deformation

Theory of lattice strain in a polycrystalline aggregate under deviatoric stress is extended to include the influence of ongoing plastic deformation. When deviatoric stress is applied to a polycrystalline material at high temperatures (or above the yield stress), applied macroscopic stress is redistributed to individual grains by plastic deformation according to their orientations with respect to the macroscopic stress and plastic anisotropy of a given crystal. This microstress causes elastic deformation of individual grains that can be measured by x-ray diffraction. Consequently, the observed lattice strain depends on two material properties, viscosity (plasticity) and elastic compliance as well as the applied macroscopic stress and the stress-strain distribution among various grains. The influence of plastic deformation on lattice strain is analyzed using an anisotropic and nonlinear power-law constitutive relationship. In this model, the dependence of inferred macroscopic stress on the crystallographic orientation of diffraction plane (hkl) comes from elastic and plastic anisotropy of a crystal. In many materials, plastic anisotropy dominates over elastic anisotropy. This explains the observed large dependence of inferred stress on the diffraction plane and means that the determination of elastic anisotropy is difficult when plastic deformation occurs with anisotropic plasticity. When elastic anisotropy is known, plastic anisotropy of single crystal and/or stress-strain distribution in a deformed polycrystal can be determined from radial x-ray diffraction using the present model. Some examples are presented using the data on MgO.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Neutron diffraction and first principles computational studies CuLixMg2-x, CuMg2 and Cu2Mg (x=k0.08)

A small addition of Li changes the orthorhombic structure of CuMg2 to hexagonal CuLixMg2-x (x = 0.08). Determining the Li content of the ternary phase and Li atomic positions was our main objective for this work. For this reason we performed neutron diffraction at several different temperatures below and above room temperature. The results obtained on two neutron powder diffractometers were compared with X-ray diffraction (XRD) data, and with first principles calculations. The first principles calculations are in good agreement with Rietveld-refined data from neutron diffraction, but do not show a marked preference for one of several possible Li sites. The Pair Distribution Function (PDF) fitting is consistent with Li substituting only Mg1 (1/2, 0, z). Interstitial spaces in the structure of CuMg2 and of CuLixMg2-x were also considered, but are unlikely to be occupied by Li. Neutron diffraction data for binary CuMg2 and Cu2Mg were also obtained.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Double Bragg Diffraction of Bessel Light Beams on Ultrasound in Uniaxial Gyrotropic Crystals

Noncollinear double acousto-optical diffraction of Bessel light beams on ultrasound in uniaxial gyrotropic crystals is studied theoretically and experimentally. It is found that when a Bessel light beam propagates along the optic axis of a crystal, the diffracted light beams of the ±1 order are symmetric relative to the incident beam and have roughly the same intensity. Double Bragg diffraction is also observed when a Bessel light beam is incident at the Bragg angle and near the optic axis, but the intensities of the +1 and +2 order diffracted beams are significantly different.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Through-Thickness Strain Gradient in a Hot-Rolled Al-Mg Alloy Obtained by Nanoindentation and Glancing Angle X-Ray Diffraction

Combined nanoindentation and glancing angle X-ray diffraction (GAXD) methods were used to study the mechanical properties of near-surface microstructures (NSMs) of a hot-rolled 5xxx aluminum alloy. Nanoindentations with a sharp indenter were carried out with penetration depth ranging from 250 nm to 4500 nm at the near-surface regions as well as the bulk of the hot-rolled alloy. The primary indentation parameter presented here was the hardness, given that plastic strain obtained from GAXD experiment could be correlated with the hardness value. Analysis of nanoindentation hardness results proved that NSMs of this alloy on average were harder than the bulk due to the presence of different surface features discussed here. The GAXD experiments were performed between a minimum incident angle 0.025°, equivalent to 765 nm penetration depth, and a maximum angle 1°, equivalent to 3000 nm penetration depth. The strain-induced broadening in the diffraction peaks was calculated by the Williamson–Hall technique. Both indentation hardness and glancing angle diffraction results confirmed strain gradient as a function of depth in the NSMs of the alloy. Both techniques also showed that the thickness of the subsurface layer (i.e., several micrometers below the surface) of hot-rolled sample was approximately 2.44 μm at the tested areas. Additionally, reported results provided evidence for the ability to use glancing angle X-ray diffraction as a nondestructive tool for the measurement of subsurface layers' thickness as well as microstrain (non-uniform or plastic strain) as a function of depth.

36 MATERIALS SCIENCE↗

Structural investigation of porcine stomach mucin by X-ray fiber diffraction and homology modeling

Research highlights: {yields} Techniques to get oriented mucin fibre. {yields} X-ray fibre diffraction pattern for mucin. {yields} Molecular modeling of mucin based on X-ray fibre diffraction pattern. -- Abstract: The basic understanding of the three dimensional structure of mucin is essential to understand its physiological function. Technology has been developed to achieve orientated porcine stomach mucin molecules. X-ray fiber diffraction of partially orientated porcine stomach mucin molecules show d-spacing signals at 2.99, 4.06, 4.22, 4.7, 5.37 and 6.5 A. The high intense d-spacing signal at 4.22 A is attributed to the antiparallel {beta}-sheet structure identified in the fraction of the homology modeled mucin molecule (amino acid residues 800-980) using Nidogen-Laminin complex structure as a template. The X-ray fiber diffraction signal at 6.5 A reveals partial organization of oligosaccharides in porcine stomach mucin. This partial structure of mucin will be helpful in establishing a three dimensional structure for the whole mucin molecule.

60 APPLIED LIFE SCIENCES↗

Interpretation of wide-angle x-ray diffraction patterns from mesophase pitch-based carbon fibers – a simulation and experimental study

Carbon fiber is a critical material in a wide range of industries, where it is highly valued for its high specific strength/stiffness, excellent wear resistance, efficient electrical and thermal transport properties, chemical resistance, and low coefficient of thermal expansion. The properties of a specific carbon fiber are closely tied to its structural characteristics at all length scales. Here, in this work, we applied wide-angle x-ray diffraction to a set of heat-treated mesophase pitch-based carbon fibers, with the goal of elucidating the crystalline structures as a function of fiber orientation. To assist with analysis and interpretation of the experimental data, we employed diffraction pattern simulations using the scalar and vector forms of the Debye scattering equation to determine the influence of basal plane orientation, crystalline ordering (turbostratic-graphitic), and basal plane asymmetry on the diffraction patterns. The results presented here suggest that growth of the transverse crystallites in mesophase pitch-based carbon fiber is fixed until graphitization temperatures are reached. The work completed here provides a framework for the analysis of carbon fiber and other oriented carbon-based materials via diffraction.

36 MATERIALS SCIENCE↗

A phase-field diffraction model for thermo-hydro-mechanical propagating fractures

This paper introduces a novel diffraction based thermo-hydraulic–mechanical (THM) model for fracture propagation using a phase-field fracture (PFF) approach. The key innovation of the THM-PFF model lies in its integrated treatment of four solution variables—displacements, phase-field, pressure, and temperature—each governed by a combination of conservation of momentum (mechanics problem), a variational inequality (constrained minimization problem), mass conservation (pressure problem), and energy conservation (temperature problem). This leads to a new formulation of a coupled variational inequality system. A major advancement is the development of an extended fixed-stress algorithm, where displacements, phase-field, pressures, and temperatures are solved in a staggered sequence. An important aspect of this work is the global coupling of pressures and temperatures across the domain using diffraction systems, with diffraction coefficients defined by material parameters weighted by the diffusive phase-field variable. To ensure robust local mass conservation, we employ enriched Galerkin finite elements (EG) for both pressure and temperature diffraction equations. By enriching the continuous Galerkin basis functions with discontinuous piecewise constants, EG accurately represents solution and parameter discontinuities while preserving local mass and energy conservation—crucial aspects for THM problems and realistic behavior. Moreover, the use of a predictor–corrector local mesh adaptivity scheme is employed, allowing the model to handle small phase-field length-scale parameters while maintaining high numerical accuracy and reasonable computational cost. Furthermore, these new model and algorithmic developments represent significant advances in the field and have been substantiated through rigorous numerical tests.

Diffraction systems↗

Hydrothermal synthesis of nanocrystalline ZnSe: An in situ synchrotron radiation X-ray powder diffraction study

The hydrothermal synthesis of nanocrystalline ZnSe has been studied by in situ X-ray powder diffraction using synchrotron radiation. The formation of ZnSe was studied using the following starting mixtures: Zn+Se+H{sub 2}O (route A) and ZnCl{sub 2}+Se+H{sub 2}O+Na{sub 2}SO{sub 3} (route B). The route A experiment showed that Zn powder starts reacting with water at 134 deg. C giving ZnO and H{sub 2} followed by the formation of ZnSe which takes place in temperature range from 167 to 195 deg. C. The route B experiment shows a considerably more complex reaction path with several intermediate phases and in this case the formation of ZnSe starts at 141 deg. C and ZnSe and Se were the only crystalline phases observed at the end of the experiment where the temperature was 195 deg. C. The sizes of the nanocrystalline particles were determined to 18 and 9 nm in the route A and B experiments, respectively. Nanocrystalline ZnSe was also synthesized ex situ using the route A and B methods and characterized by conventional X-ray powder diffraction and transmission electron microscopy. An average crystalline domain size of ca. 8 nm was determined by X-ray powder diffraction in fair agreement with TEM images, which showed larger aggregates of nanoparticles having approximate diameters of 10 nm. Furthermore, a method for purification of the ZnSe nanoparticles was developed and the prepared particles showed signs of anisotropic size broadening of the diffraction peaks. - Graphical abstract: Stack of powder diagrams showing the formation of nanocrystalline ZnSe under hydrothermal conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron charge distribution of CaAl{sub 2-x}Zn{sub x}: Maximum entropy method combined with Rietveld analysis of high-resolution-synchrotron X-ray powder diffraction data

Using short wavelength X-rays from synchrotron radiation (SPring-8), high-resolution powder diffraction patterns were collected. In order to study both the structural relationship and the mechanism of stability in the CaAl{sub 2-x}Zn{sub x} system, among the Laves phases (MgCu{sub 2} and MgNi{sub 2} type) and KHg{sub 2}-type structures, the charge density distribution of CaAl{sub 2-x}Zn{sub x} as a function of x was obtained from the diffraction data by Rietveld analysis combined with the maximum entropy method (MEM). In the MEM charge density maps overlapping electron densities were clearly observed, especially in the Kagome nets of the Laves phases. In order to clarify the charge redistribution in the system, the deformation charge densities from the densities formed by the constituent free atoms are discussed. In the ternary MgNi{sub 2}-type phase, partial ordering of Al and Zn atoms is observed, a finding that is supported by ab-initio total energy calculations. - Graphical abstract: Using short wavelength X-rays from synchrotron radiation (SPring-8), high-resolution powder diffraction patterns of the Laves (MgCu{sub 2} and MgNi{sub 2} type) and KHg{sub 2}-type phases in the CaAl{sub 2-x}Zn{sub x} system were collected. The charge density distribution in the Laves phases as a function of x was obtained from the diffraction data by Rietveld analysis combined with the maximum entropy method (MEM)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Neutron powder diffraction study of the layer organic-inorganic hybrid iron(II) methylphosphonate-hydrate, Fe[(CD{sub 3}PO{sub 3})(D{sub 2}O)]

The crystal and magnetic structures of the hybrid organic-inorganic layer compound Fe[(CD{sub 3}PO{sub 3})(D{sub 2}O)] have been studied by neutron powder diffraction as a function of temperature down to 1.5 K. The neutron diffraction pattern recorded at 200 K shows that the fully deuterated compound crystallizes in one of the two known forms of the undeuterated Fe[(CH{sub 3}PO{sub 3})(H{sub 2}O)]. The crystal structure is orthorhombic, space group Pmn2{sub 1}, with the following unit-cell parameters: a=5.7095(1) A, b=8.8053(3) A and c=4.7987(1) A; Z=2. The crystal structure remains unchanged on cooling from 200 to 1.5 K. Moreover, at low temperature, Fe[(CD{sub 3}PO{sub 3})(D{sub 2}O)] shows a commensurate magnetic structure (k=(0,0,0)). As revealed by bulk susceptibility measurements on Fe[(CH{sub 3}PO{sub 3})(H{sub 2}O)], the magnetic structure corresponds to a canted antiferromagnet with a critical temperature T{sub N}=25 K. Neutron powder diffraction reveals that below T{sub N}=23.5 K the iron magnetic moments in Fe[(CD{sub 3}PO{sub 3})(D{sub 2}O)] are antiferromagnetically coupled and oriented along the b-axis, perpendicular to the inorganic layers. No ferromagnetic component is observable in the neutron powder diffraction experiment, due to its too small value (<0.1{mu}{sub B}). - Graphical abstract: Crystal structure and magnetic structure of Fe[(CD{sub 3}PO{sub 3})(D{sub 2}O)].

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal expansion of Ba{sub 2}ZnSi{sub 2}O{sub 7}, BaZnSiO{sub 4} and the solid solution series BaZn{sub 2-x}Mg{sub x}Si{sub 2}O{sub 7} (0{<=}x{<=}2) studied by high-temperature X-ray diffraction and dilatometry

The thermal expansion behavior of Ba{sub 2}ZnSi{sub 2}O{sub 7}, BaZnSiO{sub 4} and BaZn{sub 2}Si{sub 2}O{sub 7} is characterized by both high-temperature X-ray diffraction (HT-XRD) and dilatometry. Ba{sub 2}ZnSi{sub 2}O{sub 7} and BaZnSiO{sub 4} show a thermal expansion (100-800 Degree-Sign C) in the range from 8.9 to 10.4 Multiplication-Sign 10{sup -6} K{sup -1}. By contrast, BaZn{sub 2}Si{sub 2}O{sub 7} has a much higher thermal expansion in the low-temperature modification and shows a phase transition at 280 Degree-Sign C which runs parallel with a steep increase in cell volume. This phase transition is also observed in the solid solution series BaZn{sub 2-x}Mg{sub x}Si{sub 2}O{sub 7}, but it is shifted to higher temperatures and to a smaller volume change with increasing Mg{sup 2+} concentration. This solid solution series is characterized by dilatometry, X-ray diffraction and differential scanning calorimetry. An adjustment of the MgO/ZnO-ratio enables the preparation of materials with a large variety of thermal expansions. - Graphical abstract: XRD-patterns of Ba{sub 2}ZnSi{sub 2}O{sub 7} were recorded at different temperatures (left). For each XRD-pattern a Rietveld-refinement was performed, the image in the middle shows the XRD-pattern measured at room temperature (circles), the Rietveld calculation (red line) and the difference between them (blue line). The lattice parameters derived hereof were plottet against the temperature and fitted to a polynomial (right picture). From those polynomials the lattice expansion was calculated. Highlights: Black-Right-Pointing-Pointer We examined the thermal expansion of Ba{sub 2}ZnSi{sub 2}O{sub 7}, BaZnSiO{sub 4} and BaZn{sub 2-x}Mg{sub x}Si{sub 2}O{sub 7}. Black-Right-Pointing-Pointer Thermal expansions were determined by dilatometry and high-temperature X-ray diffraction. Black-Right-Pointing-Pointer High-temperature X-ray diffraction enabled to determine anisotropic thermal expansion. Black-Right-Pointing-Pointer BaZn{sub 2}Si{sub 2}O{sub 7} exhibits the highest thermal expansion due to a phase transition. Black-Right-Pointing-Pointer Substitution of small amounts of Zn{sup 2+} for Mg{sup 2+} leads to a decrease in thermal expansion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A neutron diffraction study of oxygen and nitrogen ordering in a kinetically stable orthorhombic iron doped titanium oxynitride

The synthesis of a polycrystalline powder sample of iron doped orthorhombic titanium oxynitride, Ti{sub 2.92}Fe{sub 0.01}O{sub 4.02}N{sub 0.98}, on the scale of 0.7 g has been achieved. This was conducted by the unusual route of delamination from a steel substrate of a thin film deposited using atmospheric pressure chemical vapour deposition. The structure of the titanium oxynitride is presented, determined from a combined analysis of X-ray and neutron powder diffraction data. The use of neutron diffraction allows the position of the oxygen and nitrogen ions in the material to be reported unambiguously for the first time. In this study Ti{sub 2.92}Fe{sub 0.01}O{sub 4.02}N{sub 0.98} is found to crystallise in the Cmcm space group, iso-structural pseudobrookite, with lattice parameters a=3.81080(6) A, b=9.6253(2) A, and c=9.8859(2) A, and contains partial oxygen-nitrogen ordering. Of the three anion sites in this structure one is exclusively occupied by oxygen, while the remaining two sites are occupied by oxygen and nitrogen in a disordered manner. Testing indicates that this iron doped titanium oxynitride is a metastable phase that decomposes above 700 Degree-Sign C into TiN and TiO{sub 2}, the thermodynamic products. - Graphical abstract: We report the synthesis of Ti{sub 2.92}Fe{sub 0.01}O{sub 4.02}N{sub 0.98} deposited as a thin film using atmospheric pressure chemical vapour deposition onto stainless steel, which is then delaminated to produce a polycrystalline powder sample. This powder sample was used in a neutron diffraction experiment, and analysis of this data has allowed the position of the oxygen and nitrogen ions in the material to be reported unambiguously for the first time. Ti{sub 2.92}Fe{sub 0.01}O{sub 4.02}N{sub 0.98} is found to crystallise in the Cmcm space group iso-structural pseudobrookite and contains partial oxygen-nitrogen ordering. Highlights: Black-Right-Pointing-Pointer Partial oxygen and nitrogen ordering has been observed using neutron diffraction. Black-Right-Pointing-Pointer A large powder sample has been made by removal of a CVD film from a steel substrate. Black-Right-Pointing-Pointer Structural details of Ti{sub 2.92}Fe{sub 0.01}O{sub 4.02}N{sub 0.98} are reported for the first time.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High pressure powder X-ray diffraction of sillenites Bi{sub 12}MO{sub 20} (M=Si, Ge, Ti) and Bi{sub 4}Ti{sub 3}O{sub 12}

Powder X-ray diffraction experiments of sillenites Bi{sub 12}M O{sub 20} (M=Si, Ge, Ti) were performed with synchrotron radiation at the ESRF, Grenoble, at pressures up to 39 GPa (M=Si), 50 GPa (M=Ge), and 37 GPa (M=Ti), respectively. These three sillenites were investigated for the first time over such a large pressure range and they show no phase transition up to the highest pressures achieved. Birch–Murnaghan equations of state of third order were fitted to the pressure dependence of the lattice parameters. The resulting bulk moduli B{sub 0} and their pressure derivatives B′ are B{sub 0}=63(1)GPa with B′=6.6(3) (M=Si), B{sub 0}=63.0(5)GPa with B′=5.90(7) (M=Ge), and B{sub 0}=48(1)GPa with B′=9.4(5) (M=Ti). In the case of Bi{sub 12}SiO{sub 20} and Bi{sub 12}TiO{sub 20} the equation of state fits were restricted to pressures below 15 GPa, because the experimental data were affected by non-hydrostatic stress at higher pressures. The equation of state of neon was redetermined (V{sub 0}=11.7(6)cm{sup 3}/mol, B{sub 0}=5(1)GPa, B′=5.5(3)GPa) and its use as an internal pressure standard for diffraction experiments is discussed. A second cubic phase could be identified in our Bi{sub 12}TiO{sub 20} sample. This was attributed to eulytite-type Bi{sub 4}Ti{sub 3}O{sub 12}, which has B{sub 0}=50.9(8)GPa and B′=6.9(3). - Graphical abstract: X-ray diffraction at high pressure → Equation of state. - Highlights: • Powder X-ray diffraction experiments of sillenites were performed at high pressures. • Equations of state of sillenites Bi{sub 12}MO{sub 20} (M=Si, Ge, Ti) were determined. • The sillenite structure was shown to be stable at high hydrostatic pressure. • Sillenites are sensitive to non-hydrostatic pressure conditions in neon-loaded DACs. • An eulytite-type Bi{sub 4}Ti{sub 3}O{sub 12} phase was found to exist up to 10 GPa.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and magnetic behavior of the cubic oxyfluoride SrFeO{sub 2}F studied by neutron diffraction

The oxyfluoride SrFeO{sub 2}F has been prepared via a low temperature route involving the infinite-layer SrFeO{sub 2} and XeF{sub 2}. SrFeO{sub 2}F crystallizes in the cubic space group Pm-3m with disordered oxygen and fluorine atoms on the anion site. Recent reports demonstrated that SrFeO{sub 2}F is antiferromagnetic at room temperature and the zero field cooled and field cooled curves diverge at ∼150 K and ∼60 K, suggesting that the material has a spin glassy magnetic state at low temperatures. In this article, variable-temperature neutron diffraction (4–723 K) was performed to clarify the magnetic behavior observed in this material. Neutron powder diffraction measurements confirmed the antiferromagnetic (AFM) ordering of the system at room temperature. Below 710(1) K, the magnetic structure is a G-type AFM structure characterized by a propagation vector k=(1/2 , 1/2 , 1/2 ). The ordered moments on Fe{sup 3+} are 4.35(6)µ{sub B} at 4 K and 4.04(5)µ{sub B} at 290 K. Our results indicate that the cubic structure is retained all the way to base temperature (4 K) in contrast to PbFeO{sub 2}F. These results are compared with those of Pb and Ba analogs which exhibit very similar magnetic behavior. Furthermore, the observation of magnetic reflections at 4 K in the diffraction pattern shows the absence of the previously proposed spin glassy behavior at low temperatures. Previous proposals to explain the ZFC/FC divergences are examined. - Graphical abstract: Variable temperature powder neutron diffraction was employed to follow the evolution of the long range antiferromagnetic state in SrFeO{sub 2}F. - Highlights: • SrFeO{sub 2}F prepared via low temperature route involving SrFeO{sub 2} and XeF{sub 2}. • The cubic structure, Pm-3m, is retained at low temperatures, 4 K. • The magnetic structure is G-type AFM with T{sub N}=710 K and Fe{sup 3+} moment of 4.35µ{sub B}. • A small volume, bulk decoupled, spin glassy domain/cluster mechanism is proposed. • Highest AFM ordering temperature compared to Pb and Ba analogs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗