Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dynamic Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Molecular dynamics simulations of the melting curve of NiAl alloy under pressure

The melting curve of B2-NiAl alloy under pressure has been investigated using molecular dynamics technique and the embedded atom method (EAM) potential. The melting temperatures were determined with two approaches, the one-phase and the two-phase methods. The first one simulates a homogeneous melting, while the second one involves a heterogeneous melting of materials. Both approaches reduce the superheating effectively and their results are close to each other at the applied pressures. By fitting the well-known Simon equation to our melting data, we yielded the melting curves for NiAl: 1783(1 + P/9.801){sup 0.298} (one-phase approach), 1850(1 + P/12.806){sup 0.357} (two-phase approach). The good agreement of the resulting equation of states and the zero-pressure melting point (calc., 1850 ± 25 K, exp., 1911 K) with experiment proved the correctness of these results. These melting data complemented the absence of experimental high-pressure melting of NiAl. To check the transferability of this EAM potential, we have also predicted the melting curves of pure nickel and pure aluminum. Results show the calculated melting point of Nickel agrees well with experiment at zero pressure, while the melting point of aluminum is slightly higher than experiment.

36 MATERIALS SCIENCE↗
DOE OSTI2015

The role of twinning deformation on the hardening response of polycrystalline magnesium from discrete dislocation dynamics simulations

The mechanical response of micro-twinned polycrystalline magnesium was studied through three-dimensional discrete dislocation dynamics (DDD). A systematic interaction model between dislocations and (1012) tension twin boundaries (TBs) was proposed and introduced into the DDD framework. In addition, a nominal grain boundary (GB) model agreeing with experimental results was also introduced to mimic the GB’s barrier effect. The current simulation results show that TBs act as a strong obstacle to gliding dislocations, which contributes significantly to the hardening behavior of magnesium. On the other hand, the deformation accommodated by twinning plays a softening role. Therefore, the concave shape of the Mg stress-strain curve results from the competition between dislocation-TB induced hardening and twinning deformation induced softening. At low strain levels, twinning deformation induced softening dominates and a decreasing hardening rate is observed in Stage-I. In Stage-II, both the hardening and softening effects decline, but twinning deformation induced softening declines faster, which leads to an increasing hardening rate.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Nonequilibrium Chemical Effects in Single-Molecule SERS Revealed by Ab Initio Molecular Dynamics Simulations

Recent developments in nanophotonics have paved the way for achieving significant advances in the realm of single molecule chemical detection, imaging, and dynamics. In particular, surface-enhanced Raman scattering (SERS) is a powerful analytical technique that is now routinely used to identify the chemical identity of single molecules. Understanding how nanoscale physical and chemical processes affect single molecule SERS spectra and selection rules is a challenging task, and is still actively debated. Herein, we explore underappreciated chemical phenomena in ultrasensitive SERS. We observe a fluctuating excited electronic state manifold, governed by the conformational dynamics of a molecule (4,4’-dimercaptostilbene, DMS) interacting with a metallic cluster (Ag20). This affects our simulated single molecule SERS spectra; the time trajectories of a molecule interacting with its unique local environment dictates the relative intensities of the observable Raman-active vibrational states. Ab initio molecular dynamics of a model Ag20-DMS system are used to illustrate both concepts in light of recent experimental results.

Environmental Molecular Sciences Laboratory↗
DOE OSTI2023

$\mathrm{DRAGON}$: A multi-GPU orbital-free density functional theory molecular dynamics simulation package for modeling of warm dense matter

As progress in electronic structure theoretical methods is made, ab initio molecular dynamics (MD) based on orbital-free density functional theory (OF-DFT) is becoming increasingly more successful at substituting the traditional, very accurate but computationally costly Kohn–Sham (KS) approach for simulations of matter at the challenging warm dense matter (WDM) regime. However, despite the significant cost alleviation of eliminating the dependence on the KS orbitals, OF-DFT MD runs require ~10 2 to 10 3 CPU cores running for days, or even weeks, for simulations of systems comprised of 10 2 to 10 3 atoms, depending on thermodynamic conditions. Here we present DRAGON, a multi-GPU OF-DFT MD code for fast and efficient simulations of WDM. With a relatively small allocation of resources (4 to 8 GPU devices) it can provide an order of magnitude speedup for simulations containing $\mathscr{O}$(10 4 ) atoms and target systems composed of $\mathscr{O}$(10 5 ) atoms at conditions within the WDM regime, which is currently outside the capabilities of CPU codes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Molecular dynamics simulations of cesium adsorption on illite nanoparticles

Here we present that the charged surfaces of micaceous minerals, especially illite, regulate the mobility of the major radioisotopes of Cs ( 134 Cs, 135 Cs, 137 Cs) in the geosphere. Despite the long history of Cs adsorption studies, the nature of the illite surface sites remains incompletely understood. To address this problem, we present atomistic simulations of Cs competition with Na for three candidate illite adsorption sites – edge, basal plane, and interlayer. Our simulation results are broadly consistent with affinities and selectivities that have been inferred from surface complexation models. Cation exchange on the basal planes is thermodynamically ideal, but exchange on edge surfaces and within interlayers shows complex, thermodynamically non-ideal behavior. The basal planes are weakly Cs-selective, while edges and interlayers have much higher affinity for Cs. The dynamics of Na-Cs exchange are rapid for both cations on the basal planes, but considerably slower for Cs localized on edge surfaces. Lastly, in addition to new insights into Cs adsorption and exchange with Na on illite, we report the development of a methodology capable of simulating fully-flexible clay mineral nanoparticles with stable edge surfaces using a well-tested interatomic potential model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Protein Molecular Dynamics Simulations with Approximate QM: What Can We Learn?

Classical force fields are essential for computer simulations of proteins and are typically parameterized to reproduce secondary and tertiary structure of isolated proteins. However, while protein-protein interactions are ubiquitous in nature, they are not considered in parameterization efforts and are far less understood than isolated proteins. A better characterization of intermolecular interactions is widely recognized as a key to revolutionizing drug and therapeutic developments with high-throughput computational screening. Urgently needed is a critical assessment of the performance of modern protein force fields against first-principles electronic structure methods and experiments. In a daring step toward this goal, we here describe a comparison of peptide folding dynamics as predicted by a molecular mechanics force field on the one hand and by an approximate electronic structure quantum mechanical (QM) method based on density-functional tight-binding (DFTB) on the other. We further compare the dynamics from straightforward DFTB simulations with a near-linear scaling version of DFTB for massively parallel computation based on the fragment molecular orbital (FMO-DFTB) method. We illustrate differences between the phenomenology of the folding dynamics from these three methods for a small model peptide, as well as charge polarization and dynamic fluctuations, point out possible correlations and implications for force field developers, and discuss the lessons learned that might become applicable to future predictive high-throughput computer screening for personalized neoantigen cancer therapy.

Irle, Stephan↗
DOE OSTI2021

Anisotropic fluid dynamical simulations of heavy-ion collisions

We present VAH, a (3+1)–dimensional simulation that evolves the far-from-equilibrium quark-gluon plasma produced in ultrarelativistic heavy-ion collisions with anisotropic fluid dynamics. We solve the hydrodynamic equations on an Eulerian grid using the Kurganov–Tadmor algorithm in combination with a new adaptive Runge–Kutta method. Our numerical scheme allows us to start the simulation soon after the nuclear collision, largely avoiding the need to integrate it with a separate pre-equilibrium dynamics module. We test the code's performance by simulating on the Eulerian grid conformal and non-conformal Bjorken flow as well as conformal Gubser flow, whose (0+1)–dimensional solutions are precisely known. Finally, we compare non-conformal anisotropic hydrodynamics to second-order viscous hydrodynamics in central Pb+Pb collisions and find that the former's longitudinal flow profile responds more consistently to the fluid's gradients along the spacetime rapidity direction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Mass transport properties of Pu/DT mixtures from orbital free molecular dynamics simulations

Mass transport properties (shear viscosity and diffusion coefficients) for Pu/DT mixtures were calculated with Orbital Free Molecular Dynamics (OFMD). The results were fitted to simple functions of mass density (for ρ=10.4 to 62.4 g/cm 3 ) and temperature (for T=100 up to 3,000 eV) for Pu/DT mixtures consisting of 100/0, 25/75, 50/50, and 75/25 by number.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

Computational Fluid Dynamics Simulation of a Pilot-Scale Waste Glass Melter

The INL has been developing a high-fidelity computational fluid dynamics (CFD) model of a Joule-heated ceramic-lined waste glass melter. The purpose is to better understand the dynamics of heat transfer within the system, in order to provide support for the optimization of the Hanford Waste Treatment Plant (WTP) that will be used for vitrification of legacy tank waste. The simulation presented here is for the DM1200 pilot-scale system, which has been operated by the Vitreous State Laboratory (VSL) over the past several decades. This system is about one-third of the scale of the full size WTP melter. Experimental data from this system is being used to validate computational simulations. The examination of the melter with a fully coupled CFD model should give an accurate assessment of the heat transfer into the reactive cold cap region. Heat is provided to the cold cap region from conduction and convection from the molten glass pool as well as radiation from the hot plenum above the cold cap. The CFD model implements a mathematical model of the cold cap developed for the assessment of the melting rate during the vitrification of tank waste. This sub-model implemented directly into the CFD model combines the mass and enthalpy balance of the cold cap together with the conversion kinetics of the feed. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2017

Acceleration of diffusive molecular dynamics simulations through mean field approximation and subcycling time integration

Highlights: • Two numerical methods are presented to accelerate DMD simulations. • The methods greatly reduce the computation time without much loss of accuracy. • The accelerated DMD model is capable of simulating long-term mass transport at atomistic length scales. • Demonstrated for the propagation of an atomically sharp phase boundary over 30 seconds. - Abstract: Diffusive Molecular Dynamics (DMD) is a class of recently developed computational models for the simulation of long-term diffusive mass transport at atomistic length scales. Compared to previous atomistic models, e.g., transition state theory based accelerated molecular dynamics, DMD allows the use of larger time-step sizes, but has a higher computational complexity at each time-step due to the need to solve a nonlinear optimization problem at every time-step. This paper presents two numerical methods to accelerate DMD based simulations. First, we show that when a many-body potential function, e.g., embedded atom method (EAM), is employed, the cost of DMD is dominated by the computation of the mean of the potential function and its derivatives, which are high-dimensional random variables. To reduce the cost, we explore both first- and second-order mean field approximations. Specifically, we show that the first-order approximation, which uses a point estimate to calculate the mean, can reduce the cost by two to three orders of magnitude, but may introduce relatively large error in the solution. We show that adding an approximate second-order correction term can significantly reduce the error without much increase in computational cost. Second, we show that DMD can be significantly accelerated through subcycling time integration, as the cost of integrating the empirical diffusion equation is much lower than that of the optimization solver. To assess the DMD model and the numerical approximation methods, we present two groups of numerical experiments that simulate the diffusion of hydrogen in palladium nanoparticles. In particular, we show that the computational framework is capable of capturing the propagation of an atomically sharp phase boundary over a time window of more than 30 seconds. The effects of the proposed numerical methods on solution accuracy and computation time are also assessed quantitatively.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Using Dynamic Simulation to Evaluate Attemperator Operation in a Natural Gas Combined Cycle With Duct Burners in the Heat Recovery Steam Generator

A generic training simulator of a natural gas combined cycle was modified to match operations at a real plant. The objective was to use the simulator to analyze cycling operations of the plant. Initial operation of the simulator revealed the potential for saturation conditions in the final high pressure superheater as the attemperator tried to control temperature at the superheater outlet during gas turbine loading and unloading. Subsequent plant operational data confirmed simulation results. Multiple simulations were performed during loading and unloading of the gas turbine to determine operational strategies that prevented saturation and increased the approach to saturation temperature. The solutions included changes to the attemperator temperature control setpoints and strategic control of the steam turbine inlet pressure control valve.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2024

Elucidating and contrasting the mechanisms for Mg and Ca sulfate ion-pair formation with multi-level embedded quantum mechanics/molecular dynamics simulations

Here, solutions and minerals containing sulfate (SO 4 2- ), and Ca 2+ and Mg 2+ cations, are ubiquitous throughout the lithosphere and are significant components of seawater, thus presenting a prototypical system for the study of strong electrolytes and crystal nucleation mechanisms. However, despite their relative abundance, key questions remain unanswered about the most fundamental atomic-level steps of their mineralization pathways and aqueous dynamics. Here, we carry out enhanced sampling multi-level molecular dynamics (MD) embedded correlated wavefunction theory simulations to elucidate ion-pairing mechanisms for Mg–SO 4 and Ca–SO 4 in concentrated aqueous solution, accurately capturing effects arising from both structural dynamics and electron exchange–correlation. We predict contact-ion-pair formation to be barrierless and highly exoergic for Ca–SO 4 , in agreement with its minimal solubility, whereas for Mg–SO 4 , solvent-shared and contact ion pairs have similar free energies, qualitatively consistent with its higher solubility. Finally, we demonstrate that brief high-temperature pre-equilibration may be utilized to accelerate convergence of free energies in blue-moon-ensemble enhanced-sampling MD.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Net-baryon diffusion in fluid-dynamic simulations of relativistic heavy-ion collisions

A hybrid (hydrodynamics + hadronic transport) theoretical framework is assembled to model the bulk dynamics of relativistic heavy-ion collisions at energies accessible in the Beam Energy Scan (BES) program at the Relativistic Heavy-Ion Collider (RHIC) and the NA61/SHINE experiment at CERN. The system's energy-momentum tensor and net baryon current are evolved according to relativistic hydrodynamics with finite shear viscosity and non-zero net baryon diffusion. Our hydrodynamic description is matched to a hadronic transport model in the dilute region. With this fully integrated theoretical framework, we present a pilot study of the hadronic chemistry, particle spectra, and anisotropic flow. Phenomenological effects of a non-zero net-baryon current and its diffusion on hadronic observables are presented for the first time. Furthermore, the importance of the hadronic transport phase is also investigated.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2018

Formation of Dislocations and Twins As a Result of Uniaxial Compression of Magnesium Single Crystals: Molecular Dynamics Simulation

An atomistic simulation of the deformation of ideal magnesium crystal along the [112̄0] crystallographic axis has been performed. The evolution of structural defects under load at T = 300–350 K is considered in detail. It is established that the nucleation of dislocations in an ideal crystal occurs when the stress reaches a level of 0.1G (G is the shear modulus). The acting deformation modes are found to be prismatic slip of a dislocations and {101̄3} twinning. The formation of dislocation networks and dislocation sites in the twinning plane is observed. Some reactions are proposed to describe the dislocation evolution in the (3̄034) plane.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Thermal transport in UO 2 with defects and fission products by molecular dynamics simulations

The importance of the thermal transport in nuclear fuel has motivated a wide range of experimental and modelling studies. In this report, the reduction of thermal transport in UO 2 due to defects and fission products has been investigated using non-equilibrium MD simulations, with two sets of empirical potentials for studying the degregation of UO 2 thermal conductivity including a Buckingham type interatomic potential and a recently developed EAM type interatomic potential. Additional parameters for U 5+ and Zr 4+ in UO 2 have been developed for the EAM potential. The thermal conductivity results from MD simulations are then corrected for the spin-phonon scattering through Callaway model formulations. To validate the modelling results, comparison was made with experimental measurements on single crystal hyper-stoichiometric UO 2+x samples.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2014

Accelerated Molecular Dynamics Simulations of Reactive Hydrocarbon Systems

The research activities in this project consisted of four different sub-projects. Three different accelerated dynamics techniques (parallel replica dynamics, hyperdynamics, and temperature-accelerated dynamics) were applied to the modeling of pyrolysis of hydrocarbons. In addition, parallel replica dynamics was applied to modeling of polymerization.

02 PETROLEUM↗