Search NASA⌕ Search

SEARCH · Search NASA

Results for “Electronic Conduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Electronic properties of Ir 3 Li and ultra-nanocrystalline lithium superoxide formation

Current lithium-oxygen (Li-O 2 ) batteries suffer from large charge overpotentials related to electronic resistivity of the insulating lithium peroxide (Li 2 O 2 ) discharge product. One potential solution to this challenge is the stabilization of the lithium superoxide (LiO 2 ) discharge intermediate, which has much higher electronic conductivity compared to Li 2 O 2 . Cathodes based on small iridium (Ir) nanoparticles have been recently used in a LiO 2 battery to successfully stabilize the LiO 2 product, however, the LiO 2 had a short lifetime. In the previous study, researchers found that the LiO 2 was stabilized on Ir 3 Li surfaces which were formed from Ir nanoparticles during battery operation. Little is known about the electronic properties of Ir 3 Li and its role in stabilizing LiO 2 product formation. This work provides the first study of the electronic properties of Ir 3 Li, which was thermally synthesized in bulk prior to implementation on the reduced graphene oxide (rGO) cathode of a Li-O 2 cell. Here, the bulk Ir 3 Li was found to have comparable electrical conductivity to Ir metal, possess metal-like magnetic properties, and has an affinity towards O 2 adsorption. The LiO 2 discharge product formed from the Li-O 2 battery discharge was characterized using Raman spectroscopy, titration, along with a comprehensive transmission electron microscopy (TEM) study. This analysis revealed the formation of ultra-nanocrystalline LiO 2 particles greater than 200 nm. This result was attributed to the use of large micron sized Ir 3 Li particles, which could stabilize larger LiO 2 particles compared to previous cathodes that utilized Ir nanoparticles that partially converted to Ir 3 Li during cycling. These results demonstrate that cathode properties can be modified to stabilize the bulk LiO 2 discharge product, which can be useful for the further development of LiO 2 -based Li-O 2 batteries.

25 ENERGY STORAGE↗

Density functional theory + U analysis of the electronic structure and defect chemistry of LSCF (La 0.5 Sr 0.5 Co 0.25 Fe 0.75 O 3-δ )

Reducing operating temperatures is a key step in making solid oxide fuel cell (SOFC) technology viable. A promising strategy for accomplishing this goal is employing mixed ion–electron conducting (MIEC) cathodes. La 1-x Sr x Co 1-y Fe y O 3-δ (LSCF) is the most widely employed MIEC cathode material; however, rational optimization of the composition of LSCF requires fundamental insight linking its electronic structure to its defect chemistry. To provide the necessary insight, density functional theory plus U (DFT+U) calculations are used to investigate the electronic structure of LSCF (xSr = 0.50, yCo = 0.25). The DFT+U calculations show that LSCF has a significantly different electronic structure than La 1-x Sr x FeO 3 because of the addition of cobalt, but that minimal electronic structure differences exist between La 0.5 Sr 0.5 Co 0.25 Fe 0.75 O 3 and La 0.5 Sr 0.5 Co 0.5 Fe 0.5 O 3 . The oxygen vacancy (V$-\atop{o}$) formation energy (ΔEf,vac) is calculated for V$-\atop{o}$ residing in different local environments within La 0.5 Sr 0.5 Co 0.25 Fe 0.75 O 3 . These results show that Co-V$-\atop{o}$-Co configurations have the highest ΔEf,vac, while Co-V$-\atop{o}$-Fe have the lowest ΔEf,vac and may act as traps for V$-\atop{o}$. We conclude that compositions with more Fe than Co are preferred because the additional Co-V$-\atop{o}$-Co sites would lead to higher overall ΔEf,vac (and lower V$-\atop{o}$ concentrations), while the trapping strength of the Image Co-V$-\atop{o}$-Fe sites is relatively weak (~0.3 eV).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A new platform for development of photosystem I based thin films with superior photocurrent: TCNQ charge transfer salts derived from ZIF-8

The transmembrane photosynthetic protein complex Photosystem I (PSI) is highly sought after for incorporation into biohybrid photovoltaic devices due to its remarkable photoactive electrochemical properties, chiefly driving charge separation with ~1 V potential and ~100% quantum efficiency. In pursuit of these integrated technologies, three factors must be simultaneously tuned, namely, direct redox transfer steps, three-dimensional coordination and stabilization of PSI aggregates, and interfacial connectivity with conductive pathways. Building on our recent successful encapsulation of PSI in the metal–organic framework ZIF-8, herein we use the zinc and imidazole cations from this precursor to form charge transfer complexes with an extremely strong organic electron acceptor, TCNQ. Specifically, the PSI-Zn-H 2 mim-TCNQ charge transfer salt complex was drop cast on ITO to form dense films. Subsequent voltammetric cycling induced cation exchange and electrochemical annealing of the film was used to enhance electron conductivity giving rise to a photocurrent in the order of 15 μA cm -2 . This study paves the way for a myriad of future opportunities for successful integration of this unique class of charge transfer salt complexes with biological catalysts and light harvesters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Energy and momentum conservation in spin transfer

We utilize simulations of spin-polarized electron scattering by a chain of localized quantum spins to show that energy and linear momentum conservation laws impose strong constraints on the properties of magnetic excitations induced by spin transfer. In turn, orbital and spin dynamics of conduction electrons depends on the dynamical characteristics of the local spins. Furthermore, our results suggest the possibility to achieve precise control of spin-transfer-driven magnetization dynamics by tailoring the spectral characteristics of the magnetic systems and of the driving electrons.

36 MATERIALS SCIENCE↗

The Origins of the Rate Enhancement in LiNi0.4Co0.2-yAlyMn0.4O2 (0<y<_0.2) Cathode Materials

Recently, much research has been directed towards finding a replacement cathode material for LiCoO{sub 2} combining high performance with lower cost and toxicity. One promising candidate material is the mixed transition metal oxide LiNi{sub 0.4}Co{sub 0.2}Mn{sub 0.4}O{sub 2}, which delivers 180 mAh/g below 4.4 V versus Li/Li{sup +}. However, in this material, there is 4% anti-site cation mixing, which hinders the mobility of lithium within the lattice, adversely affecting its rate performance in lithium batteries. Ongoing work in our lab has shown that partial or full substitution of cobalt with aluminum, LiNi{sub 0.4}Co{sub 0.2-y}Al{sub y}Mn{sub 0.4}O{sub 2} (0 < y {le} 0.2), can lead to significant improvements in rate performance. In particular, LiNi{sub 0.4}Co{sub 0.15}Al{sub 0.05}Mn{sub 0.4}O{sub 2} shows greatly improved rate capability with almost no sacrifice in the overall capacity delivered at low rates between 2.0 and 4.3V (Figure 1). The smaller ionic radius of Al{sup 3+} in octahedral coordination (0.535 {angstrom}) compared to Li{sup +} (0.76 {angstrom}) creates a strong driving force for the formation of a more lamellar structure in the aluminum containing materials. XRD experiments and subsequent Rietveld refinement (Figure 2) reveal a significant decrease in anti-site defect concentration upon aluminum substitution, dropping from {approx}4% at y=0 to {approx}2.5% at y=0.2. Concurrently, there is an increase in the lithium slab dimension from 2.6 {angstrom} to 2.63 {angstrom}. This expansion allows for a reduced activation energy and improved lithium diffusivity through the crystal lattice. Interestingly, the pressed pellet conductivities of Al-substituted compounds are lower than that of the parent as determined by AC impedance measurements. This lends further credence to the hypothesis that structural effects resulting in improved lithium diffusivity are responsible for the rate enhancement, rather than changes in the electronic structure. Further experiments to understand the effect of structural changes induced by Al substitution on the transport properties are underway in this laboratory. The changes in electronic conductivity and the chemical diffusion coefficient of lithium as determined by pressed pellet conductivities and GITT experiments will be discussed. Further refinement of cation ordering and crystal structure parameters as determined from neutron diffraction and XANES experiments will also be presented.

25 ENERGY STORAGE↗

Evolution of the Kondo lattice electronic structure above the transport coherence temperature

Significance The temperature ( T )-dependent evolution of the Kondo lattice electronic structure is a long-standing topic of theoretical and experimental investigation, still lacking a truly microscopic theory that agrees with a full experimental characterization. Here multiple characteristic T scales of the interaction of localized f moments with conduction electrons in the Kondo lattice CeCo I n 5 are identified and investigated using angle-resolved photoemission measurements that substantiate dynamical mean-field theory which newly includes the full realism of crystalline electric-field (CEF) f splittings. Thereby errors in the itinerant versus localized f -state classification from standard density functional theory are corrected, microscopic insight into the broad T -range crossover of f -hybridization effects is gained, and a prediction of CEF degeneracy crossover below the lattice coherence T is made.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of the dynamical magnetization state on spin transfer

We utilize simulations of electron scattering by a chain of dynamical quantum spins to analyze the interplay between the spin transfer effect and the magnetization dynamics.We show that the complex interactions between the spin-polarized electrons and the dynamical states of the local spins can be decomposed into separate processes involving electron reflection and transmission, as well as absorption and emission of magnons—the quanta of magnetization dynamics. Analysis shows that these processes are substantially constrained by the energy and momentum conservation laws, resulting in a significant dependence of spin transfer on the electron’s energy and the dynamical state of the local spins. Here, our results suggest that exquisite control of spin transfer efficiency and of the resulting dynamical magnetization states may be achievable by tailoring the spectral characteristics of the conduction electrons and of the magnetic systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Molecule@MOF: A New Class of Opto-electronic Materials.

Metal organic frameworks (MOFs) are extended, nanoporous crystalline compounds consisting of metal ions interconnected by organic ligands. Their synthetic versatility suggest a disruptive class of opto - electronic materials with a high degree of electrical tunability and without the property - degrading disorder of organic conductors. In this project we determined the factors controlling charge and energy transport in MOFs and evaluated their potential for thermoelectric energy conversion. Two strategies for a chieving electronic conductivity in MOFs were explored: 1) using redox active 'guest' molecules introduced into the pores to dope the framework via charge - transfer coupling (Guest@MOF), 2) metal organic graphene analogs (MOGs) with dispersive band structur es arising from strong electronic overlap between the MOG metal ions and its coordinating linker groups. Inkjet deposition methods were developed to facilitate integration of the guest@MOF and MOG materials into practical devices.

36 MATERIALS SCIENCE↗

The Origins of the Rate Enhancement in LiNi0.4Co0.2-yAlyMn0.4O2 (0<y<_0.2) Cathode Materials

Recently, much research has been directed towards finding a replacement cathode material for LiCoO{sub 2} combining high performance with lower cost and toxicity. One promising candidate material is the mixed transition metal oxide LiNi{sub 0.4}Co{sub 0.2}Mn{sub 0.4}O{sub 2}, which delivers 180 mAh/g below 4.4 V versus Li/Li{sup +} (1, 2). However, in this material, there is 4% anti-site cation mixing, which hinders the mobility of lithium within the lattice, adversely affecting its rate performance in lithium batteries. Ongoing work in our lab has shown that partial or full substitution of cobalt with aluminum, LiNi{sub 0.4}Co{sub 0.2}Mn{sub 0.4}O{sub 2} (0 < y {le} 0.2), can lead to significant improvements in rate performance (3). In particular, LiNi{sub 0.4}Co{sub 0.2}Mn{sub 0.4}O{sub 2} shows greatly improved rate capability with almost no sacrifice in the overall capacity delivered at low rates between 2.0 and 4.3V (Figure 1). The smaller ionic radius of Al{sup 3+} in octahedral coordination (0.535 {angstrom}) compared to Li{sup +} (0.76 {angstrom}) creates a strong driving force for the formation of a more lamellar structure in the aluminum containing materials (4, 5). XRD experiments and subsequent Rietveld refinement (Figure 2) reveal a significant decrease in anti-site defect concentration upon aluminum substitution, dropping from {approx}4% at y=0 to {approx}2.5% at y=0.2. Concurrently, there is an increase in the lithium slab dimension from 2.6 {angstrom} to 2.63 {angstrom}. This expansion allows for a reduced activation energy and improved lithium diffusivity through the crystal lattice (6). Interestingly, the pressed pellet conductivities of Al-substituted compounds are lower than that of the parent as determined by AC impedance measurements. This lends further credence to the hypothesis that structural effects resulting in improved lithium diffusivity are responsible for the rate enhancement, rather than changes in the electronic structure. Further experiments to understand the effect of structural changes induced by Al substitution on the transport properties are underway in this laboratory. The changes in electronic conductivity and the chemical diffusion coefficient of lithium as determined by pressed pellet conductivities and GITT experiments will be discussed. Further refinement of cation ordering and crystal structure parameters as determined from neutron diffraction and XANES experiments will also be presented.

25 ENERGY STORAGE↗

Spin filtering and spin separation in 2D materials by topological spin Hall effect

The needs of high speed performance electronic devices for various applications require novel materials and new physical phenomena. For these purposes we propose to study new physical effects based on electron scattering on magnetic skyrmions and vortices distributed in a 2D ferromagnetic material. Herein, we show that the topological spin Hall effect can be efficiently employed for the filtering, switching, and separation of spin currents. For some values of the parameters (conduction electron concentrations, and skyrmion/vortex sizes) it is possible to separate Hall currents for different electron spin projections as it is like for different carrier charges (electrons and holes) in the normal Hall effect. The calculations are performed using the Boltzmann kinetic equation for the nonequilibrium distribution function and the Lippmann–Schwinger equation for the transition matrix in the whole range of the adiabaticity parameter. The spin filtering due to the skyrmion/vortex scattering can be several orders of magnitude more efficient in the narrow range of the electron concentrations than that of the ordinary ferromagnetic spin polarization in spintronics.

36 MATERIALS SCIENCE↗

Extracting the effective mass of electrons in transparent conductive oxide thin films using Seebeck coefficient

A method is proposed that combines Seebeck coefficient and carrier concentration to determine the electron effective mass of transparent conductive oxide (TCO) thin films. Experiments were conducted to test the validity of this approach on the transparent conductive Ga-doped ZnO thin films deposited by magnetron sputtering. An evident agreement of the calculated electron effective mass of the films is observed between the proposed approach and the previous studies. Besides, the optical carrier concentration and mobility derived from the calculated electron effective mass and spectroscopic ellipsometry using a complex dielectric function are consistent with those from direct Hall-effect measurement. The agreements suggest that Seebeck coefficient can serve as an alternative tool for extracting the effective mass of electrons in TCO films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancement of Conjugated Polymer Microstructure and Mixed-Conducting Properties via Chalcogenophene Heteroatom Substitution

Heteroatom substitution is a powerful tool to tune the intra- and intermolecular structure of conjugated polymers as well as their resulting optoelectronic and electrochemical properties. Here, a series of oligoethylene glycol bithiophene chalcogenophene polymers (p(g3T2-X)) with systematically varied furan, thiophene, selenophene, and tellurophene comonomers have been synthesized for mixed ionic-electronic conducting applications. Their microstructures have been thoroughly characterized ex situ and in situ with X-ray scattering, and their mixed conducting properties have been probed in electrochemical transistor testbeds. Chalcogenophene heteroatom choice was found to clearly dictate the polymer microstructure (crystallite dimensionality and orientation) and tune mixed conducting properties. Proceeding down Group 16, from O to Se systematically directed the molecular ordering of 2D polymer crystallites from face-on (O) to mixed (S) to edge-on (Se) orientations, with Te driving the polymer to form well-oriented edge-on 3D crystallites. Heteroatom dictated crystallite quality, and orientation tuned relative ionic transport by 2 orders of magnitude. Hole mobility (μ hole ) and mixed conducting figure of merit (μC*) were each tuned over an order of magnitude depending on heteroatom choice, with the Te-containing polymer reaching μ hole = 3.60 cm 2 V –1 s –1 and μC* = 483 F cm –1 V –1 s –1 , due to improved molecular ordering. Insights from this polymer series highlight target microstructures for enhanced mixed conduction in future conjugated polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spin-polarized current injection induced magnetic reconstruction at oxide interface

Electrical manipulation of magnetism presents a promising way towards using the spin degree of freedom in very fast, low-power electronic devices. Though there has been tremendous progress in electrical control of magnetic properties using ferromagnetic (FM) nanostructures, an opportunity of manipulating antiferromagnetic (AFM) states should offer another route for creating a broad range of new enabling technologies. Here we selectively probe the interface magnetization of SrTiO 3 /La 0.5 Ca 0.5 MnO 3 /La 0.7 Sr 0.3 MnO 3 heterojunctions and discover a new spin-polarized current injection induced interface magnetoelectric (ME) effect. The accumulation of majority spins at the interface causes a sudden, reversible transition of the spin alignment of interfacial Mn ions from AFM to FM exchange-coupled, while the injection of minority electron spins alters the interface magnetization from C-type to A-type AFM state. In contrast, the bulk magnetization remains unchanged. We attribute the current-induced interface ME effect to modulations of the strong double-exchange interaction between conducting electron spins and local magnetic moments. As a result, the effect is robust and may serve as a viable route for electronic and spintronic applications.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High performance, electroforming-free, thin film memristors using ionic Na 0.5 Bi 0.5 TiO 3

Here, in ionically conducting Na 0.5 Bi 0.5 TiO 3 (NBT), we explore the link between growth parameters, stoichiometry and resistive switching behavior and show NBT to be a highly tunable system. We show that the combination of oxygen ionic vacancies and low-level electronic conduction is important for controlling Schottky barrier interfacial switching. We achieve a large ON/OFF ratio for high resistance/low resistance ( R HRS / R LRS ), enabled by an almost constant R HRS of ~10 9 Ω, and composition-tunable R LRS value modulated by growth temperature. R HRS / R LRS ratios of up to 10 4 and pronounced resistive switching at low voltages (SET voltage of <1.2 V without high-voltage electroforming), strong endurance (no change in resistance states after several 10 3 cycles), uniformity, stable switching and fast switching speed are achieved. Of particular interest is that the best performance is achieved at the lowest growth temperature studied (600 °C), which is opposite to the case of most other perovskite oxides for memristors, where higher growth temperatures are required for optimum performance. This is understood based on the oxygen vacancy control of interfacial switching in NBT, whereas a range of other mechanisms (including filamentary switching) occur in other perovskites. The study of NBT has enabled us to determine key parameters for achieving high performance memristors.

36 MATERIALS SCIENCE↗

Attempt to measure magnetic hyperfine fields in metallic thin wires under spin Hall conditions using synchrotron-radiation Mössbauer spectroscopy

Measurement of the magnetic hyperfine fields in metallic thin wires under spin Hall conditions was attempted using the emerging technique, synchrotron-radiation Mössbauer spectroscopy. A Mössbauer probe layer of {sup 57}Fe (0.2 nm), {sup 57}Fe (0.6 nm), or {sup 119}Sn (0.6 nm) was embedded as an electron spin detector near the surfaces of V, Au, Pt, and {sup 56}Fe wires. The magnitudes of the magnetic hyperfine fields at the {sup 57}Fe and {sup 119}Sn nuclear sites that could be enhanced by non-equilibrium conduction-electron spin polarization were measured both without and with the application of an electric current along the wire. Changes in the Mössbauer spectra were not clearly observed, indicating that the magnetic hyperfine field induced by non-equilibrium spin polarization is smaller than the detection limit at least for the measured systems and conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Critical Spin Fluctuation Mechanism for the Spin Hall Effect

Herein we propose mechanisms for the spin Hall effect in metallic systems arising from the coupling between conduction electrons and local magnetic moments that are dynamically fluctuating. Both a side-jump-type mechanism and a skew-scattering-type mechanism are considered. In either case, dynamical spin fluctuation gives rise to a nontrivial temperature dependence in the spin Hall conductivity. This leads to the enhancement in the spin Hall conductivity at nonzero temperatures near the ferromagnetic instability. The proposed mechanisms could be observed in 4$d$ or 5$d$ metallic compounds.

36 MATERIALS SCIENCE↗

Density functional theory investigation of the electronic structure and defect chemistry of Sr1-xKxFeO3

Solid oxide fuel cells (SOFCs) efficiently generate electricity, but high operating temperatures (T op > 800 °C) limit their utility. Reducing T op requires mixed ion–electron conducting (MIEC) cathode materials. Density functional theory is used here to investigate the role of potassium substitutions in the MIEC material Sr1-x K x FeO3 (SKFO). We predict that such substitutions are endothermic. SrFeO3 and SKFO have nearly identical metallic electronic structures. Oxygen vacancy formation energies decrease by ~0.2 eV when x K increases from 0 to 0.0625. SKFO is a promising SOFC MIEC cathode material; however, further experimental investigations must assess its long-term stability at the desired operating temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗