Search NASA⌕ Search

SEARCH · Search NASA

Results for “Enhanced Sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Improving the Fatigue Crack Propagation Resistance and Damage Tolerance of 2524-T3 Alloy with Amorphous Electroless Ni-P Coating

The surface microhardness, as well as the fatigue crack propagation (FCP) resistance of 2524-T3 alloy, is improved by producing a 20-μm-thick amorphous electroless Ni-12% P coating on its surface. Compared to the substrate, this deposited EN coating possesses higher strength properties and exhibits a greater ability of accommodating the plastic deformation at the fatigue crack tip, thereby remarkably improving the FCP resistance in near-threshold and early Paris regimes. Regardless of the similar FCP rates in Paris regime (ΔK ≥ 16.2 MPa m{sup 0.5}), the coated sample exhibits extended Paris regime and enhanced damage tolerance.

36 MATERIALS SCIENCE↗

Intrinsic and hard magnetic properties of (Sm 1-x R x )-Fe-Co-V alloys (R = Gd, Zr, and Y)

SmFe 12 -based compounds with the ThMn 12 -type structure have a great potential as future rare-earth-lean permanent magnets. However, their reliance on stabilizing non-magnetic elements has impeded practical applications. Therefore, elements such as Gd, Y, and Zr have gained popularity as candidates to minimize the need for stabilizing elements by reducing the formation energy of the ThMn 12 (1:12) phase. Here, this study examines the effect of Gd, Y, and Zr on the intrinsic and hard magnetic properties in (Sm 1-x R x ) 1.2 Fe 8.4 Co 2.1 V 1.5 (or with nominal composition of (Sm 1-x R x ) 9.1 Fe 63.6 Co 15.9 V 11.4 ) with a single 1:12 phase for 0 ≤ x ≤ 0.3. Notably, samples substituted with Gd exhibit an enhanced temperature dependence of the magnetic properties.

36 MATERIALS SCIENCE↗

Copper substrate as a catalyst for the oxidation of chemical vapor deposition-grown graphene

We report the catalytic effect of copper substrate on graphene–oxygen reaction at high temperature. Previous studies showed that graphene grown on copper are mostly defect-free with strong oxidation resistance. We found that a freshly prepared copper-supported graphene sample can be completely oxidized in trace amount of oxygen (<3 ppm) at 600 °C within 2 h. Both X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES) suggest that upon ambient air exposure, oxygen molecules diffuse into the space between graphene and copper, resulting in the formation of copper oxide which acts as catalytic sites for the graphene-oxygen reaction. This result has important implications for the characterization, processing, and storage of copper-supported graphene samples. - Graphical abstract: The copper substrate enhances the thermel oxidation of single-layer graphene. - Highlights: • A copper-supported graphene can be oxidized in Ar (O{sub 2}<3 ppm, 600 °C, 2 h). • O{sub 2} intercalates between graphene and copper upon exposure to air. • The copper foil should not be considered as an inert substrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation on the preparation and luminescence emission of LaF{sub 3}:Eu{sup 3+}@LaF{sub 3}/SiO{sub 2} core-shell nanostructure

LaF{sub 3}:Eu{sup 3+}, LaF{sub 3}:Eu{sup 3+}@LaF{sub 3}, LaF{sub 3}:Eu{sup 3+}@CeF{sub 3} and LaF{sub 3}:Eu{sup 3+}@SiO{sub 2} nanoparticles were successfully synthesized via hydrothermal route and modified Stöber method. The surface property of LaF{sub 3}:Eu{sup 3+} particle was successfully modified by coating LaF{sub 3} and SiO{sub 2} shell onto the particle, which resulted in the change of the surface property and luminescence emission of LaF{sub 3}:Eu{sup 3+}. It was found that the surface quenchers were decreased and thus the nonradiative pathways were reduced with core/shell structure, which not only enhanced the yellow emission of the sample, but also changed the intensity ratio of the yellow to orange emission. The dependence of the shell property and shell thickness on the luminescence emission spectra were investigated systematically. The current investigation can provide useful information for developing applications in biological imaging, detection, and sensing and other aspects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of doping ions on the structural defect and the electrical behavior of CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics

Graphical abstract: The dielectric constant decreases with Ta doping, increases with Y doping and keeps almost constant with Zr doping compared with that of pure CCTO. - Highlights: • Y and Ta doping cause different defect types and concentration. • Defect influences the grain boundary mobility and results in different grain size. • Y doping increases the dielectric constant and decreases the nonlinear property. • Ta doping decreases the dielectric constant and enhances the nonlinear property. • Zr doped sample has nearly the defect type and dielectric properties as CaCu{sub 3}Ti{sub 4}O{sub 12}. - Abstract: The microstructure, dielectric and electrical properties of CaCu{sub 3}Ti{sub 4−x}R{sub x}O{sub 12} (R = Y, Zr, Ta; x = 0 and 0.005) ceramics were investigated by XRD, Raman spectra, SEM and dielectric spectrum measurements. Positron annihilation measurements have been performed to investigate the influence of doping on the defects. The results show that all samples form a single crystalline phase. Y and Ta doping cause different defect types and increase the defect size and concentration, which influence the mobility of grain boundary and result in the different grain size. Y doping increases the dielectric constant and decreases the nonlinear property while Ta doping lead to an inverse result. Zr-doped sample has nearly the defect type, grain morphology and dielectric properties as pure CaCu{sub 3}Ti{sub 4}O{sub 12}. The effects of microstructure including the grain morphology and the vacancy defects on the mechanism of the dielectric and electric properties by doping are discussed.

36 MATERIALS SCIENCE↗

Low cost and facile fabrication of broadband laser power meter based on reduced graphene oxide film

Highlights: • The reduced graphene oxide film is used to fabricate the low cost laser powermeter. • The photoresponse of the device is explored in the visible to near-infrared range. • The photoresponse of the device is linearly related to the irradiated laser power. • The photoelectric current of the device does not depend on the laser spot size. - Abstract: Here, we have demonstrated a new type of broadband reduced graphene oxide-based laser power meter in simple and low cost method. The broadband photosensitivity of the device is confirmed by photocurrent measurements at different incident laser wavelengths of 405, 532, 635 and 808 nm. It is shown that its photocurrent increases linearly with increasing the power of the laser beam. Also, it is observed that the photocurrent behavior of the device does not depend upon the size of the laser spot. It should be noted that the reduced graphene oxide power meter is the thermal detection device. Therefore, the response of the sample in the vacuum is greatly enhanced in compared to the environmental air. Cooling system can also decrease the time required for the establishment of thermal equilibrium and thus reduce the response time of the power meter. These results open up exciting opportunities for developing broadband photodetectors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Highly efficient and stable p-type ZnO nanowires with piezotronic effect for photoelectrochemical water splitting

Unremitting efforts have been made to develop high-performance photoelectrochemical (PEC) water-splitting system to produce clean hydrogen fuel using sunlight. In this research, a novel way, combining highly-ordered nanowires (NWs) structure and piezotronic effect of p-type ZnO has been demonstrated to dramatically enhance PEC hydrogen evolution performance. Systematic characterizations indicate that the Sb atoms uniformly dope into ZnO NWs and substitute Zn sites with the introduction of two zinc vacancies to form the shallow acceptor Sb Zn –2V Zn complex. Detailed synchrotron-based X-ray absorption near-edge structure (XANES) experiments in O K-edge and Zn L-edge further confirm the formation of the complex, and theoretical calculation verifies the Sb 5+ state dominating the complex. The optimal photocurrent density of the 0.2Sb/ZnO-anneal NWs can reach –0.85 mA/cm 2 (0 V RHE ) which is 17.2 times larger than that of the n-ZnO NWs under sunlight illumination (100 mW/cm 2 ). Furthermore, the piezotronic effect can be introduced to regulate the charge separation and transfer in the ZnO NWs through modulating the band structure near the interface. The photocurrent density can further increase to –1.08 mA/cm 2 (0 V RHE ) under a 0.6% tensile strain, which is 27.4% enhancement with respect to the ZnO sample without strain. These conclusions provide an efficient way to design and develop high-performance photoelectrodes toward PEC hydrogen evolution.

08 HYDROGEN↗

Laser Ablation-Capillary Absorption Spectroscopy: A novel approach for high throughput and increased spatial resolution measurements of δ 13 C in plant-soil systems

Spatial and temporal heterogeneity of nutrient exchange within the rhizosphere is a topic of increasing interest, although challenging to study due to limits in existing analytical capabilities. Here, we developed and demonstrated a new approach applying laser ablation sample introduction to capillary absorption spectroscopy (LA-CAS) to characterize carbon isotopic distribution within plant tissues, rhizosphere, and soil. We exposed switchgrass plants to 13 CO 2 to allow tracing of 13 C-labelled photosynthates within plant biomass and into the associated soil. The LA-CAS methods we describe leverage continuous measurements of a sample stream derived from laser ablation line scans (10-25 µm in width) over a sample surface which enables the user to produce an isotope map with a) higher data density or b) over larger spatial areas versus previously existing techniques. This versatility of LA-CAS is assessed through testing of a range of laser parameters (spot size, scan rates) on various materials (soil, plant biomass/tissues, and rhizosphere). Here, we demonstrate the ability of LA-CAS to provide near instantaneous $δ$ 13 C measurements over isotopically distinct surfaces to enable high spatially resolved mapping of 13 C-labelled material within the rhizosphere. Applying LA-CAS analysis to plant biomass, we observed higher $δ$ 13 C values concentrated within phloem structures, consistent with localized photosynthate transport. When mapping across the rhizosphere, 13 C-enriched soil was typically present within 5-10µm of root boundaries with a steep spatial increase in $δ$ 13 C when the scan approached the middle of the root. As with all LA approaches, care is required to ensure accurate results as phenomena linked to ablation, combustion, and isotopic measurement can impart artifacts if not carefully controlled. Still, taken as a whole, our demonstrations highlight the increased sample throughput, improved data density, and enhanced $δ$ 13 C capability of LA-CAS versus other LA techniques and emphasize the role this method can play in future plant and rhizosphere related studies.

59 BASIC BIOLOGICAL SCIENCES↗

Polymer Architecture: Does it Influence Shear Stability?

Hyperbranched and linear poly(alkyl methacrylate)s with and without polycaprolactone grafts were designed and prepared via a core-first strategy, then evaluated with respect to their rheology and shear stability performance. The focus of this work was to study the effect of architecture on mechanical shear stability, as it relates to lubricant performance. The polymers were prepared from functionalized macroinitiators subsequently subjected to ATRP/ARGET-ATRP conditions with dodecyl methacrylate and 2-ethylhexyl methacrylate mixtures. As expected, most compounds displayed an increased viscosity index along with increasing molecular weights. The inclusion of polycaprolactone appears to have enhanced the viscosity index in select samples. Although the hyperbranched polymers studied here varied in the number of arms from about twenty to one (linear), the data presented supports the empirical understanding that shear stability is mainly influenced by molecular weight and not architecture or topology. The polymers with caprolactone blocks demonstrated a positive effect on the shear stability, as in possessing the lowest viscosity loss values which were four times lower than the other compounds included in this study as well as the benchmark.

Cosimbescu, Lelia↗

Signatures of Biologically Driven Hemicellulose Modification Quantified by Analytical Pyrolysis Coupled with Multidimensional Gas Chromatography Mass Spectrometry

Biomass storage operation is one major source of feedstock quality variability that impacts on downstream preprocessing, feeding, handling and conversion into biofuels, chemicals and products. In field Ccorn stover biomass bales undergoes degradation and cell wall components modification resulting from microbial biological heating occurring during storage. A molecular characterization of the modification was achieved to unveil and understand the changes of structural cell wall modification in corn stover samples by conducting low temperature (400°C) pyrolysis, comparing samples that were mildly biologicallyun heated to those that had been subjected to microbial severe biological heating (~60°C). Pyrolysis of the samples originating from biomass that had been heated during storage generated small oxygenates such as furfural, 5-methylfurfural and 2-(5H)-furanone with efficiencies that were as much as ten times greater than those measured for the mildly unheated samples. Most of the compounds having enhanced efficiencies were C5 oxygenates, suggesting that the pyrolysis products may be formed from hemicellulosic precursor polymers in the corn stover. The findings suggest that microbial heating may be disrupting the cell wall structure, fragmenting the hemicellulose or cellulose chains, generating more polymer termini that have higher efficiency for generating the oxygenates at lower temperatures. Pyrolysis variability with temperature may be a beneficial strategy for improved biomass cell wall characterization, and for guiding control strategies for enhanced control over product distributions , providing insights to understand and manage the feedstock variability as well as to inform harvest and storage best management practices.

09 BIOMASS FUELS↗

Sorption capacity and sorption kinetic measurements of CO{sub 2} and CH{sub 4} in confined and unconfined bituminous coal

Carbon dioxide injection into coal formations provides an opportunity to sequester carbon while simultaneously enhancing methane recovery. Although powdered coal samples provide a quick indication of the gas sorption capacity, underground storage takes place within compact coal monoliths, and therefore, it may be necessary to account for in situ conditions, specifically confining stress, for meaningful estimates. This study presents the sorption rates and sorption capacities of CO{sub 2} and CH{sub 4} for a bituminous coal sample in a whole sample and in pulverized form. The impact of confining stress on these sorption capacities of coal cores is evaluated with a multiple-point isotherm over a prolonged time period. The kinetics of the complex, heterogeneous processes occurring in a bituminous coal sample are quantified while under confining stress. Sorption capacities for a powdered sample are 1.17 and 0.66 mmol/g for CO{sub 2} and CH{sub 4}, respectively. The application of 6.9 and 13.8 MPa of confining stress contributed to 39 and 64% CO{sub 2} sorption capacity reduction. Similarly, 85 and 91% CH{sub 4} uptake capacity reduction is observed at those confining stresses. The time-dependent gas diffusion parameters are quantified using the volumetric method with a mathematical analysis of the pressure-decay data. Carbon dioxide diffused through the coal faster than CH{sub 4}. Initial exposure over a few days showed a rapid reduction in diffusion presumably as the macro- and mesopores filled. With longer exposure, 10 additional days, a steady slower diffusion is observed for CO{sub 2}. The steady-state slower diffusion is achieved within a few days for CH{sub 4}. It was found that the overall gas movement, specifically diffusion, is hindered by confining stresses and takes place at rates significantly less than in unconfined powder coal.

01 COAL, LIGNITE, AND PEAT↗

New Physics Agnostic Selections For New Physics Searches

We discuss a model-independent strategy for boosting new physics searches with the help of an unsupervised anomaly detection algorithm. Prior to a search, each input event is preprocessed by the algorithm - a variational autoencoder (VAE). Based on the loss assigned to each event, input data can be split into a background control sample and a signal enriched sample. Following this strategy, one can enhance the sensitivity to new physics with no assumption on the underlying new physics signature. Our results show that a typical BSM search on the signal enriched group is more sensitive than an equivalent search on the original dataset.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Microstructure and Magnetic Properties of PrMnO{sub 3} Bulk and Thin Film

Perovskite PrMnO{sub 3}(PMO) had been prepared in bulk by solid state reaction and thin films on corning glass, fused silica and MgO (100) glass substrate by pulsed laser deposition technique. SEM micrographs show that grains with size 2{approx}3 {mu}m is observed in bulk PMO while thin films PMO show strongly connected grain structure with particle size that not larger than 100 nm. X-ray diffraction analysis shows that all samples are in single phase with orthorhombic crystal structure. Bulk PMO sample had lattice strain of 0.134% which is the lowest value among others. However, larger lattice strain was observed in thin film samples due to lattice mismatch between film-substrate and caused the MnO{sub 6} to deform. All samples shown paramagnetic or antiferromagnetic behavior, enhancement in magnetization value occurred for all PMO grew as film. We believe that larger lattice strain favor the grain growth of PMO towards more order phase. In summary, formation of structure and microstructure of thin film PMO depends on type of substrate used and it affect the magnetic property.

36 MATERIALS SCIENCE↗

Influence of C or In buffer layer on photoluminescence behaviour of ultrathin ZnO film

We study the effect of the indium or carbon buffer layer on the photoluminescence (PL) property of ZnO ultrathin films deposited on a Si(100) substrate. The surface morphology of the films obtained using scanning tunnelling microscopy shows spherical shaped ZnO nanoparticles of size ∼8 nm in ZnO/C/Si and ∼22 nm in ZnO/Si samples, while the ZnO/In/Si sample shows elliptical shaped ZnO particles. Further, the ZnO/C/Si sample shows densely packed ZnO nanoparticles in comparison with other samples. Strong band edge emission has been observed in the presence of In or C buffer layer, whereas the ZnO/Si sample exhibits poor PL emission. The influence of C and In buffer layers on the PL behaviour of ZnO films is studied in detail using temperature dependent PL measurements in the range of 4 K–300 K. The ZnO/C/Si sample exhibits a multi-fold enhancement in the PL emission intensity with well-resolved free and bound exciton emission lines. Our experimental results imply that the ZnO films deposited on the C buffer layer showed higher particle density and better exciton emission desired for optoelectronic applications.

36 MATERIALS SCIENCE↗

Estimating the density of states of frustrated spin systems

Abstract Estimating the density of states (DOS) of systems with rugged free energy landscapes is a notoriously difficult task of the utmost importance in many areas of physics ranging from spin glasses to biopolymers. DOS estimation has also recently become an indispensable tool for the benchmarking of quantum annealers when these function as samplers. Some of the standard approaches suffer from a spurious convergence of the estimates to metastable minima, and these cases are particularly hard to detect. Here, we introduce a sampling technique based on population annealing enhanced with a multi-histogram analysis and report on its performance for spin glasses. We demonstrate its ability to overcome the pitfalls of other entropic samplers, resulting in some cases in large scaling advantages that can lead to the uncovering of new physics. The new technique avoids some inherent difficulties in established approaches and can be applied to a wide range of systems without relevant tailoring requirements. Benchmarking of the studied techniques is facilitated by the introduction of several schemes that allow us to achieve exact counts of the degeneracies of the tested instances.

Barash, Lev (ORCID:000000022298785X)↗

Machine-learning techniques for model-independent searches in dijet final states

Anomaly detection methods used in a recent search for new phenomena by CMS at the CERN LHC are presented. The methods use machine learning to detect anomalous jets produced in the decay of new massive particles without depending on a specific theory model. The effectiveness of these approaches in enhancing sensitivity to various simulated signal samples is studied and compared using data collected in proton–proton collisions at a center-of-mass energy of 13 TeV. In an example analysis, the capabilities of anomaly detection methods are further demonstrated by identifying large-radius jets consistent with Lorentz-boosted hadronically decaying top quarks in a model-agnostic framework.

CMS↗

In situ spectroscopic study of the plastic deformation of amorphous silicon under nonhydrostatic conditions induced by indentation

Indentation-induced plastic deformation of amorphous silicon (a-Si) thin films was studied by in situ Raman imaging of the deformed contact region of an indented sample, employing a Raman spectroscopy-enhanced instrumented indentation technique (IIT). The occurrence and evolving spatial distribution of changes in the a-Si structure caused by processes, such as polyamorphization and crystallization, induced by indentation loading were observed. Furthermore, the obtained experimental results are linked with previously published work on the plastic deformation of a-Si under hydrostatic compression and shear deformation to establish a model for the deformation behavior of a-Si under indentation loading.

36 MATERIALS SCIENCE↗

Signal/noise enhancement strategies for stochastically estimated correlation functions

We develop here strategies for enhancing the signal/noise ratio for stochastically sampled correlation functions. The techniques are general and offer a wide range of applicability. We demonstrate the potential of the approach with a generic two-state system and then explore the practical applicability of the method for single hadron correlators in lattice quantum chromodynamics. In the latter case, we determine the ground state energies of the pion, proton, and delta baryon, as well as the ground and first excited state energy of the rho meson using matrices of correlators computed on an exemplary ensemble of anisotropic gauge configurations. In the majority of cases, we find a modest reduction in the statistical uncertainties on extracted energies compared to conventional variational techniques. However, in the case of the delta baryon, we achieve a factor of 3 reduction in statistical uncertainties. The variety of outcomes achieved for single hadron correlators illustrates an inherent dependence of the method on the properties of the system under consideration and the operator basis from which the correlators are constructed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗