Search NASA⌕ Search

SEARCH · Search NASA

Results for “FORESTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

A Proposed Extension to the Soil Moisture and Ocean Salinity Level 2 Algorithm for Mixed Forest and Moderate Vegetation Pixels

The Soil Moisture and Ocean Salinity (SMOS)mission, launched in November 2009, provides global maps of soil moisture and ocean salinity by measuring the L-band (1.4 GHz) emission of the Earth's surface with a spatial resolution of 40-50 km.Uncertainty in the retrieval of soilmoisture over large heterogeneous areas such as SMOS pixels is expected, due to the non-linearity of the relationship between soil moisture and the microwave emission. The current baseline soilmoisture retrieval algorithm adopted by SMOS and implemented in the SMOS Level 2 (SMOS L2) processor partially accounts for the sub-pixel heterogeneity of the land surface, by modelling the individual contributions of different pixel fractions to the overall pixel emission. This retrieval approach is tested in this study using airborne L-band data over an area the size of a SMOS pixel characterised by a mix Eucalypt forest and moderate vegetation types (grassland and crops),with the objective of assessing its ability to correct for the soil moisture retrieval error induced by the land surface heterogeneity. A preliminary analysis using a traditional uniform pixel retrieval approach shows that the sub-pixel heterogeneity of land cover type causes significant errors in soil moisture retrieval (7.7%v/v RMSE, 2%v/v bias) in pixels characterised by a significant amount of forest (40-60%). Although the retrieval approach adopted by SMOS partially reduces this error, it is affected by errors beyond the SMOS target accuracy, presenting in particular a strong dry bias when a fraction of the pixel is occupied by forest (4.1%v/v RMSE,-3.1%v/v bias). An extension to the SMOS approach is proposed that accounts for the heterogeneity of vegetation optical depth within the SMOS pixel. The proposed approach is shown to significantly reduce the error in retrieved soil moisture (2.8%v/v RMSE, -0.3%v/v bias) in pixels characterised by a critical amount of forest (40-60%), at the limited cost of only a crude estimate of the optical depth of the forested area (better than 35% uncertainty). This study makes use of an unprecedented data set of airborne L-band observations and ground supporting data from the National Airborne Field Experiment 2005 (NAFE'05), which allowed accurate characterisation of the land surface heterogeneity over an area equivalent in size to a SMOS pixel.

Panciera, Rocco↗
NASA NTRS2012

Retrieval of Vertical LAI Profiles Over Tropical Rain Forests using Waveform Lidar at La Selva, Costa Rica

This study explores the potential of waveform lidar in mapping the vertical and spatial distributions of leaf area index (LAI) over the tropical rain forest of La Selva Biological Station in Costa Rica. Vertical profiles of LAI were derived at 0.3 m height intervals from the Laser Vegetation Imaging Sensor (LVIS) data using the Geometric Optical and Radiative Transfer (GORT) model. Cumulative LAI profiles obtained from LVIS were validated with data from 55 ground to canopy vertical transects using a modular field tower to destructively sample all vegetation. Our results showed moderate agreement between lidar and field derived LAI (r2=0.42, RMSE=1.91, bias=−0.32), which further improved when differences between lidar and tower footprint scales (r2=0.50, RMSE=1.79, bias=0.27) and distance of field tower from lidar footprint center (r2=0.63, RMSE=1.36, bias=0.0) were accounted for. Next, we mapped the spatial distribution of total LAI across the landscape and analyzed LAI variations over different land cover types. Mean values of total LAI were 1.74, 5.20, 5.41 and 5.62 over open pasture, secondary forests, regeneration forests after selective-logging and old-growth forests respectively. Lastly, we evaluated the sensitivities of our LAI retrieval model to variations in canopy/ground reflectance ratio and to waveform noise such as induced by topographic slopes. We found for both, that the effects were not significant for moderate LAI values (about 4). However model derivations of LAI might be inaccurate in areas of high-slope and high LAI (about 8) if ground return energies are low. This research suggests that large footprint waveform lidar can provide accurate vertical LAI profile estimates that do not saturate even at the high LAI levels in tropical rain forests and may be a useful tool for understanding the light transmittance within these canopies.

Tang, Hao↗
NASA NTRS2012

View Angle Effects on MODIS Snow Mapping in Forests

Binary snow maps and fractional snow cover data are provided routinely from MODIS (Moderate Resolution Imaging Spectroradiometer). This paper investigates how the wide observation angles of MODIS influence the current snow mapping algorithm in forested areas. Theoretical modeling results indicate that large view zenith angles (VZA) can lead to underestimation of fractional snow cover (FSC) by reducing the amount of the ground surface that is viewable through forest canopies, and by increasing uncertainties during the gridding of MODIS data. At the end of the MODIS scan line, the total modeled error can be as much as 50% for FSC. Empirical analysis of MODIS/Terra snow products in four forest sites shows high fluctuation in FSC estimates on consecutive days. In addition, the normalized difference snow index (NDSI) values, which are the primary input to the MODIS snow mapping algorithms, decrease as VZA increases at the site level. At the pixel level, NDSI values have higher variances, and are correlated with the normalized difference vegetation index (NDVI) in snow covered forests. These findings are consistent with our modeled results, and imply that consideration of view angle effects could improve MODIS snow monitoring in forested areas.

MODIS↗
NASA NTRS2014

Ten Years of Forest Cover Change in the Sierra Nevada Detected Using Landsat Satellite Image Analysis

The Landsat Ecosystem Disturbance Adaptive Processing System (LEDAPS) methodology was applied to detected changes in forest vegetation cover for areas burned by wildfires in the Sierra Nevada Mountains of California between the periods of 1975- 79 and 1995-1999. Results for areas burned by wildfire between 1995 and 1999 confirmed the importance of regrowing forest vegetation over 17% of the combined burned areas. A notable fraction (12%) of the entire 5-km (unburned) buffer area outside the 1995-199 fires perimeters showed decline in forest cover, and not nearly as many regrowing forest areas, covering only 3% of all the 1995-1999 buffer areas combined. Areas burned by wildfire between 1975 and 1979 confirmed the importance of disturbed (or declining evergreen) vegetation covering 13% of the combined 1975- 1979 burned areas. Based on comparison of these results to ground-based survey data, the LEDAPS methodology should be capable of fulfilling much of the need for consistent, low-cost monitoring of changes due to climate and biological factors in western forest regrowth following stand-replacing disturbances.

Vegetation↗
NASA NTRS2014

Evaluating an Automated Approach for Monitoring Forest Disturbances in the Pacific Northwest from Logging, Fire and Insect Outbreaks with Landsat Time Series Data

Forests are the largest aboveground sink for atmospheric carbon (C), and understanding how they change through time is critical to reduce our C-cycle uncertainties. We investigated a strong decline in Normalized Difference Vegetation Index (NDVI) from 1982 to 1991 in Pacific Northwest forests, observed with the National Ocean and Atmospheric Administration's (NOAA) series of Advanced Very High Resolution Radiometers (AVHRRs). To understand the causal factors of this decline, we evaluated an automated classification method developed for Landsat time series stacks (LTSS) to map forest change. This method included: (1) multiple disturbance index thresholds; and (2) a spectral trajectory-based image analysis with multiple confidence thresholds. We produced 48 maps and verified their accuracy with air photos, monitoring trends in burn severity data and insect aerial detection survey data. Area-based accuracy estimates for change in forest cover resulted in producer's and user's accuracies of 0.21 +/- 0.06 to 0.38 +/- 0.05 for insect disturbance, 0.23 +/- 0.07 to 1 +/- 0 for burned area and 0.74 +/- 0.03 to 0.76 +/- 0.03 for logging. We believe that accuracy was low for insect disturbance because air photo reference data were temporally sparse, hence missing some outbreaks, and the annual anniversary time step is not dense enough to track defoliation and progressive stand mortality. Producer's and user's accuracy for burned area was low due to the temporally abrupt nature of fire and harvest with a similar response of spectral indices between the disturbance index and normalized burn ratio. We conclude that the spectral trajectory approach also captures multi-year stress that could be caused by climate, acid deposition, pathogens, partial harvest, thinning, etc. Our study focused on understanding the transferability of previously successful methods to new ecosystems and found that this automated method does not perform with the same accuracy in Pacific Northwest forests. Using a robust accuracy assessment, we demonstrate the difficulty of transferring change attribution methods to other ecosystems, which has implications for the development of automated detection/attribution approaches. Widespread disturbance was found within AVHRR-negative anomalies, but identifying causal factors in LTSS with adequate mapping accuracy for fire and insects proved to be elusive. Our results provide a background framework for future studies to improve methods for the accuracy assessment of automated LTSS classifications.

Landsat↗
NASA NTRS2015

Airborne Lidar-Based Estimates of Tropical Forest Structure in Complex Terrain: Opportunities and Trade-Offs for REDD+

Background: Carbon stocks and fluxes in tropical forests remain large sources of uncertainty in the global carbon budget. Airborne lidar remote sensing is a powerful tool for estimating aboveground biomass, provided that lidar measurements penetrate dense forest vegetation to generate accurate estimates of surface topography and canopy heights. Tropical forest areas with complex topography present a challenge for lidar remote sensing. Results: We compared digital terrain models (DTM) derived from airborne lidar data from a mountainous region of the Atlantic Forest in Brazil to 35 ground control points measured with survey grade GNSS receivers. The terrain model generated from full-density (approx. 20 returns/sq m) data was highly accurate (mean signed error of 0.19 +/-0.97 m), while those derived from reduced-density datasets (8/sq m, 4/sq m, 2/sq m and 1/sq m) were increasingly less accurate. Canopy heights calculated from reduced-density lidar data declined as data density decreased due to the inability to accurately model the terrain surface. For lidar return densities below 4/sq m, the bias in height estimates translated into errors of 80-125 Mg/ha in predicted aboveground biomass. Conclusions: Given the growing emphasis on the use of airborne lidar for forest management, carbon monitoring, and conservation efforts, the results of this study highlight the importance of careful survey planning and consistent sampling for accurate quantification of aboveground biomass stocks and dynamics. Approaches that rely primarily on canopy height to estimate aboveground biomass are sensitive to DTM errors from variability in lidar sampling density.

Airborne lidar↗
NASA NTRS2015

Regional Rates of Young US Forest Growth Estimated From Annual Landsat Disturbance History and IKONOS Stereo Imagery

Forests of the Contiguous United States (CONUS) have been found to be a large contributor to the global atmospheric carbon sink. The magnitude and nature of this sink is still uncertain and recent studies have sought to define the dynamics that control its strength and longevity. The Landsat series of satellites has been a vital resource to understand the long-term changes in land cover that can impact ecosystem function and terrestrial carbonstock. We combine annual Landsat forest disturbance history from 1985 to 2011 with single date IKONOS stereoimagery to estimate the change in young forest canopy height and above ground live dry biomass accumulation for selected sites in the CONUS. Our approach follows an approximately linear growth rate following clearing over short intervals and does not estimate the distinct non-linear growth rate over longer intervals.We produced canopy height models by differencing digital surface models estimated from IKONOS stereo pairs with national elevation data (NED). Correlations between height and biomass were established independently using airborne LiDAR, and then applied to the IKONOS-estimated canopy height models. Graphing current biomass against time since disturbance provided biomass accumulation rates. For 20 study sites distributed across five regions of the CONUS, 19 showed statistically significant recovery trends (p is less than 0.001) with canopy growth from 0.26 m yr-1to 0.73 m yr-1. Above ground live dry biomass (AGB) density accumulation ranged from 1.31 t/ha yr-1 to 12.47 t/ha yr-1. Mean forest AGB accumulationwas 6.31 t/ha yr-1 among all sites with significant growth trends. We evaluated the accuracy of our estimates by comparing to field estimated site index curves of growth, airborne LiDAR data, and independent model predictions of C accumulation. Growth estimates found with this approach are consistent with site index curves and total biomass estimates fall within the range of field estimates. This is aviable approach to estimate forest biomass accumulation in regions with clear-cut harvest disturbances.

Neigh, Christopher S. R.↗
NASA NTRS2016

Photosynthetic Efficiency of Northern Forest Ecosystems Using a MODIS-Derived Photochemical Reflectance Index (PRI)

This study evaluates a direct remote sensing approach from space for the determination of ecosystem photosynthetic light use efficiency (LUE), through measurement of vegetation reflectance changes expressed with the Photochemical Reflectance Index (PRI). The PRI is a normalized difference index based on spectral changes at a physiologically active wavelength (approximately 531 nanometers) as compared to a reference waveband, and is only available from a very few satellites. These include the two Moderate-Resolution Imaging Spectroradiometers (MODIS) on the Aqua and Terra satellites each of which have a narrow (10-nanometer) ocean band centered at 531 nanometers. We examined several PRI variations computed with candidate reference bands, since MODIS lacks the traditional 570-nanometer reference band. The PRI computed using MODIS land band 1 (620-670 nanometers) gave the best performance for daily LUE estimation. Through rigorous statistical analyses over a large image collection (n equals 420), the success of relating in situ daily tower-derived LUE to MODIS observations for northern forests was strongly influenced by satellite viewing geometry. LUE was calculated from CO2 fluxes (moles per moles of carbon absorbed quanta) measured at instrumented Canadian Carbon Program flux towers in four Canadian forests: a mature fir site in British Columbia, mature aspen and black spruce sites in Saskatchewan, and a mixed deciduous/coniferous forest site in Ontario. All aspects of the viewing geometry had significant effects on the MODIS-PRI, including the view zenith angle (VZA), the view azimuth angle, and the displacement of the view azimuth relative to the solar principal plane, in addition to illumination related variables.Nevertheless, we show that forward scatter sector views (VZA, 16 degrees-45 degrees) provided the strongest relationships to daily LUE, especially those collected in the early afternoon by Aqua (r squared = 0.83, RMSE (root mean square error) equals 0.003 moles per moles of carbon absorbed quanta). Nadir (VZA, 0 degrees plus or minus 15 degrees) and backscatter views (VZA, −16 degrees to −45 degrees) had lower performance in estimating LUE (nadir: r squared approximately equal to 0.62-0.67; backscatter: r squared approximately equal to 0.54-0.59) and similar estimation error (RMSE equals 0.004-0.005).When directional effects were not considered, only a moderately successful MODIS-PRI vs. LUE relationship (r squared equals 0.34, RMSE equals 0.007) was obtained in the full dataset (all views & sites, both satellites), but site-specific relationships were able to discriminate between coniferous and deciduous forests. Overall, MODIS-PRI values from Terra (late morning) were higher than those from Aqua (early afternoon), before/after the onset of diurnal stress responses expressed spectrally. Therefore, we identified ninety-two Terra-Aqua "same day" pairs, for which the sum of Terra morning and Aqua afternoon MODIS-PRI values (PRI (sub sum) using all available directional observations was linearly correlated with daily tower LUE (r squared equals 0.622, RMSE equals 0.013) and independent of site differences or meteorological information. Our study highlights the value of off-nadir directional reflectance observations, and the value of pairing morning and afternoon satellite observations to monitor stress responses that inhibit carbon uptake in Canadian forest ecosystems. In addition, we show that MODIS-PRI values, when derived from either: (i) forward views only, or (ii) Terra/Aqua same day (any view) combined observations, provided more accurate estimates of tower-measured daily LUE than those derived from either nadir or backscatter views or those calculated by the widely used semi-operational MODIS GPP model (MOD17) which is based on a theoretical maximum LUE and environmental data. Consequently, we demonstrate the importance of diurnal as well as off-nadir satellite observations for detecting vegetation physiological processes.

Middleton, E. M.↗
NASA NTRS2017

How to Address a Global Problem with Earth Observations? Developing Best Practices to Monitor Forests Around the World

Forests represent a key natural resource, for which degradation or disturbance is directly associated to economic implications, particularly in the context of the United Nations program REDD+ in supporting national policies to fight illegal deforestation. SERVIR, a joint NASA-USAID initiative that brings Earth observations (EO) for improved environmental decision making in developing countries, works with established institutions, called SERVIR hubs, in four regions around the world. SERVIR is partnering with global programs with great experience in providing best practices in forest monitoring systems, such as SilvaCarbon and the Global Forest Observation Initiative (GFOI), to develop a capacity building plan that prioritizes user needs. Representatives from the SERVIR global network met in February 2017 with experts in the field of Synthetic Aperture Radar (SAR) for forest applications to envisage this capacity building plan that aims to leverage the state-of-the-art knowledge on remote sensing to enhance forest monitoring for user agencies in SERVIR regions.

remote sensing↗
NASA NTRS2018

How to Leverage the Power of SAR Observations for Forest Monitoring Systems

Earth observations from Synthetic Aperture Radar (SAR) can provide unique observations related to forest structure and condition. Furthermore, SAR has many potential applications in forest monitoring systems, particularly where clouds have impeded optical observations. Currently, there is a reliable, freely-available, provision of SAR datasets, such as Sentinel-1, and there are plans to have more observations in the near- future (NISAR, BIOMASS). Given SAR’s enhanced earth observation characteristics, there is broad interest in using SAR datasets for decision support systems, such as deforestation early warning systems. However, applications of SAR are still underutilized. What is preventing users from using SAR data in their decision support systems? This study documents the experiences and lessons learned from the SERVIR network on the main limitations of incorporating SAR datasets into existing forest monitoring systems. This research also focuses on the major technical and scientific barriers we experience and best practices to address them. The results of this study are part of the SERVIR- SilvaCarbon collaboration. The primary goal of this collaboration is to build capacity in the applied use of SAR for forest monitoring and biomass estimation. The products of this effort aim to start closing the gap between SAR-science and forest applications. We will also present results to generate applied-ready knowledge for SAR.

SAR↗
NASA NTRS2020

The Global Ecosystem Dynamics Investigation: High-Resolution Laser Ranging of the Earth’s Forests and Topography

Obtaining accurate and widespread measurements of the vertical structure of the Earth’s forests has been a longsought goal for the ecological community. Such observations are critical for accurately assessing the existing biomass of forests, and how changes in this biomass caused by human activities or variations in climate may impact atmospheric CO2 concentrations. Additionally, the three-dimensional structure of forests is a key component of habitat quality and biodiversity at local to regional scales. The Global Ecosystem Dynamics Investigation (GEDI) was launched to the International Space Station in late 2018 to provide high-quality measurements of forest vertical structure in temperate and tropical forests between 51.6 N & S latitude. The GEDI instrument is a geodetic-class laser altimeter/waveform lidar comprised of 3 lasers that produce 8 transects of structural information. Over its two-year nominal lifetime GEDI is anticipated to provide over 10 billion waveforms at a footprint resolution of 25 m. These data will be used to derive a variety of footprint and gridded products, including canopy height, canopy foliar profiles, Leaf Area Index (LAI), sub-canopy topography and biomass. Additionally, data from GEDI are used to demonstrate the efficacy of its measurements for prognostic ecosystem modeling, habit and biodiversity studies, and for fusion using radar and other remote sensing instruments. GEDI science and technology are unique: no other space-based mission has been created that is specifically optimized for retrieving vegetation vertical structure. As such, GEDI promises to advance our understanding of the importance of canopy vertical variations within an ecological paradigm based on structure, composition and function.

Dubayah, Ralph↗
NASA NTRS2017

Large-scale product of forest height using a new approach from spaceborne repeat-pass SAR interferometry and LIDAR

Spaceborne SAR interferometry (InSAR) has the potential of mapping the forest height on a global scale and a monthly/weekly basis under all weather conditions, which can improve our understanding of the global carbon dynamics. In previous work, repeatpass SAR interferometry from spaceborne sensors is utilized to create large-scale forest height maps (that are particularly interested for large-scale ecological research) based on a newly developed approach. This paper thus serves as a summary paper and also sheds light on the future directions with improved results. In particular, it will be shown that repeat-pass SAR interferometry is able to create a large-scale forest height mosaic product with RMSE 4 m for forest stands on the order of 20 hectares through using the past spaceborne repeat-pass InSAR observations (i.e. JAXA’s ALOS-1 and ALOS-2) combined with sparse airborne lidar training samples over the forested areas in New England, US. Moreover, the results and performance of this approach can be remarkably improved with several enhancement techniques that can be easily satisfied with use of future spaceborne repeat-pass InSAR and lidar missions (e.g. NASA-ISRO’s NISAR and NASA’s GEDI). The methodology described in this paper can be considered as a complimentary tool to the existing PolInSAR technique and also serves as an observing prototype for the future spaceborne missions of repeatpass InSAR in fusion with lidar (e.g. NISAR and GEDI).

Treuhaft, Robert↗
NASA NTRS2018

Mapping Forest Disturbance Intensity in North and South Carolina Using Annual Landsat Observations and Field Inventory Data

Disturbance and regrowth are vital processes in determining the roles of forest ecosystem in the carbon and biogeochemical cycles. Using time series observations, the vegetation change tracker (VCT) algorithm was designed to map the location, timing, and spectral magnitudes of forest disturbance events. While these spectral disturbance magnitudes are indicative of physical changes in tree cover or biomass, their quantitative relationships have yet to be established. This study focuses on estimating disturbance intensity as measured by percent basal area removal using spectral indices from the VCT algorithm over North and South Carolina. Repeat measurements on Forest Service Forest Inventory Analysis (FIA) ground plots, which provide changes in basal area between multiple dates at precise locations, are used for training and validation of the model. The overall R2 between predicted disturbance intensity and reference data is 0.66, and cross-validation prediction uncertainty is 14% in North Carolina. Possible causes of this uncertainty could be site heterogeneity and the temporal offset between ground measurements and satellite observations. Results show the area of stand clearing disturbances remains relatively stable around 1143 km2 yr−1 in North and South Carolina throughout the period of observations (1985–2015). The average amount of forest area affected by partial disturbance is much higher at 3287 km2 yr−1. The area of partial disturbances has strong inter-annual variability with a high value of 6000 km2 in 2007 and a low value of 1919 km2 in 2013.

Xin Tao↗
NASA NTRS2022

Development of SMAP Retrievals for Forested Regions: SMAPVEX19-22 and SMAPVEX22-Boreal

The retrieval of soil moisture (SM) under forest canopy has long been an important goal for low frequency remote sensing. The NASA Soil Moisture Active Passive (SMAP) mission is engaged at three separate experiment sites to improve its SM retrieval algorithm in forested areas. Two of the sites are located in the deciduous forest region in Massachusetts and New York, US and one is located in southern boreal forest zone in Saskatchewan, Canada. Each site has a SM measurement network of about 20 stations spread out over an area of about 30 km, which covers the SMAP radiometer footprint. In 2022, intensive observations will be carried out at each site which involve deployments of an airborne instrument, which is similar to the SMAP instrument, and intensive manual measurements of SM, surface and vegetation. The measurements also include tower-based radiometer observations with ground truth measurements within the instrument footprint. Here we show some early results using the networks and SMAP measurements to analyze the sensitivity of the SMAP L-band measurements to SM changes in forested area and the impact of the vegetation to the signal. The results suggest an upper limit for vegetation attenuation accounting for surface roughness effect and relate that to the values used in the current SMAP SM products.

Yueh, Simon H.↗
NASA NTRS2023

Integrating Forest Structural Diversity Measurement Into Ecological Research

The measurement of forest structure has evolved steadily due to advances in technology, methodology, and theory. Such advances have greatly increased our capacity to describe key forest structural elements and resulted in a range of measurement approaches from traditional analog tools such as measurement tapes to highly derived and computationally intensive methods such as advanced remote sensing tools (e.g., lidar, radar). This assortment of measurement approaches results in structural metrics unique to each method, with the caveat that metrics may be biased or constrained by the measurement approach taken. While forest structural diversity (FSD) metrics foster novel research opportunities, understanding how they are measured or derived, limitations of the measurement approach taken, as well as their biological interpretation is crucial for proper application. We review the measurement of forest structure and structural diversity—an umbrella term that includes quantification of the distribution of functional and biotic components of forests. We consider how and where these approaches can be used, the role of technology in measuring structure, how measurement impacts extend beyond research, and current limitations and potential opportunities for future research.

Jeff W. Atkins↗
DOE OSTI2019

Perspectives of Family Forest Owners Regarding Wood-Based Bioenergy

Developing sustainable supply chains for bioenergy begins with forest owners. Here we review results from a survey of private forest owners in regions that supply a majority of US wood pellets to Europe. Most private forest owners are aware that environmental benefits of bioenergy outweigh the costs. Aesthetic and conservation values are among multiple reasons for keeping land in forests. A majority of the 724 private land owners who responded to the survey are willing to provide woody biomass for energy. Owners place high value on hunting and recreational use of forests. Factors affecting willingness to supply biomass for energy include the right price, noninterference with traditional saw timber income, and compatibility with the owners’ land management and conservation goals.

09 BIOMASS FUELS↗
DOE OSTI2025

Tropical Forest Soil Microbiome Modulates Leaf Heat Tolerance More Strongly Under Warming Than Ambient Conditions

ABSTRACT It is unclear how plants respond to increasing temperatures. Leaf heat tolerance (LHT) is often at its upper limit in tropical forests, suggesting that climate change might negatively impact these forests. We hypothesized that intraspecific variation in LHT might be associated with changes in the soil microbiome, which might also respond to climate. We hypothesized that warming would increase LHT through changes in the soil microbiome: we combined an in situ tropical warming experiment with a shade house experiment in Puerto Rico. The shade house experiment consisted of growing seedlings of Guarea guidonia , a dominant forest species, under different soil microbiome treatments (reduced arbuscular mycorrhizal fungi, reduced plant pathogens, reduced microbes, and unaltered) and soil inoculum from the field experiment. Heat tolerance was determined using chlorophyll fluorescence ( F V /F m ) on individual seedlings in the field and on groups of seedlings (per pot) in the shade house. We sequenced soil fungal DNA to analyze the impacts of the treatments on the soil microbiome. In the field, seedlings from ambient temperature plots showed higher F V /F m values under high temperatures (0.648 at 46°C and 0.067 at 52°C) than seedlings from the warming plots (0.535 at 46°C and 0.031 at 52°C). In the shade house, the soil microbiome treatments significantly influenced the fungal community composition and LHT ( T crit and F V /F m ). Reduction in fungal pathogen abundance and diversity altered F V /F m before T 50 for seedlings grown with soil inoculum from the warming plots but after T 50 for seedlings grown with soil inoculum from the ambient plots. Our findings emphasize that the soil microbiome plays an important role in modulating the impacts of climate change on plants. Understanding and harnessing this relationship might be vital for mitigating the effects of warming on forests, emphasizing the need for further research on microbial responses to climate change.

Hernandes Villani, Gabriela [Department of Plant B↗
DOE OSTI2022

Climate Change Risks to Global Forest Health: Emergence of Unexpected Events of Elevated Tree Mortality Worldwide

Recent observations of elevated tree mortality following climate extremes, like heat and drought, raise concerns about climate change risks to global forest health. We currently lack both sufficient data and understanding to identify whether these observations represent a global trend toward increasing tree mortality. In this work, we document events of sudden and unexpected elevated tree mortality following heat and drought events in ecosystems that previously were considered tolerant or not at risk of exposure. These events underscore the fact that climate change may affect forests with unexpected force in the future. We use the events as examples to highlight current difficulties and challenges for realistically predicting such tree mortality events and the uncertainties about future forest condition. Advances in remote sensing technology and greater availably of high-resolution data, from both field assessments and satellites, are needed to improve both understanding and prediction of forest responses to future climate change.

59 BASIC BIOLOGICAL SCIENCES↗