Search NASA⌕ Search

SEARCH · Search NASA

Results for “FORGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Conductive nanolamellar Cu/martensite wire with high strength

Cu wires can be greatly strengthened without losing much conductivity if a continuous nanolamellar structure with Cu and a strong second constituent is achieved. Here, we report on a nanolamellar Cu/steel wire fabricated by repetitive hot-pressing, forging, rolling and subsequent wire drawing. Austenization and quenching in liquid nitrogen resulted in a Cu/martensite structure, exhibiting tensile strength of 1220 MPa. The electrical conductivity of the wire was measured to be about 60% International Annealed Copper Standard (IACS), which was comparable with Cu/Fe fabricated by alloying and casting. In situ tensile tests under high energy X-ray diffraction were utilized to explore the deformation behavior of the wire. It was discovered that the martensite carried about 60% of the load, accounting for the high strength.

36 MATERIALS SCIENCE↗

An isothermal forming process with multi-stage variable speed for magnesium component assisted by sensitivity analysis

We have developed a multi-stage variable speed (MSV) isothermal forming process based on strain rate sensitivity (SRS) analysis, and successfully produced a large size of rib-web component of magnesium alloy from a cylindrical billet. The obtained rib-web component has been processed into parts for mechanical properties examination and the examination results met the standard of being safely used in aircrafts. The process parameters of the forming technology and microstructure change were explicitly linked by the SRS coefficient. The finite element (FE) simulation and SRS distribution were implemented to identify the relationship among process parameters, shaping characteristics, and microstructure development. The MSV speed process was employed for reducing the forming load, refining grain sizes and increasing the strength of the component. With the selected process parameters the maximum forming load was reduced to be less than 20 MN, which is 55.3% lower than that used in the same process with the initial constant speed unchanged. Fine dynamic recrystallization (DRX) were observed from all parts of the forged cover plate including the convex, ribs, and web region. It was also found that higher strain resulted in more uniform distribution of fine ß-Mg17Al12 precipitates and larger DRX volume fraction. Importantly the developed isothermal forming process with severe plastic deformation can be applied for obtaining grain refinement so improving the mechanical properties of Mg products.

Magnesium alloy, Isothermal forming, Multi-stage v↗

Friction surface layer deposition of triple-phase Al 10 Cr 12 Fe 35 Mn 23 Ni 20 high entropy alloy: Process optimization and microstructural evolution

A high-strength Co-free triple-phase Al 10 Cr 12 Fe 35 Mn 23 Ni 20 high-entropy alloy (HEA) was successfully fabricated using Friction Surface Layer Deposition (FSLD), a bulk manufacturing method. Multiple single-layer deposits were produced by varying forging force (F) and traverse speeds (T r ) to optimize the process parameters. The optimized conditions (F = 40 kN & T r = 200 mm/min) were then applied to manufacture a scaled-up multi-layer specimen. The initial microstructure of the HEA consisted of coarse grains of the soft FCC-phase, long columnar dendrites of the hard BCC-phase, and small precipitates of the harder B2-phase within the BCC-dendrites. During FSLD, the FCC-matrix underwent continuous dynamic recrystallization due to high-temperature severe plastic deformation, forming finer equiaxed grains. Simultaneously, the BCC-dendrites fractured into smaller fragments, some of which experienced partial growth and coarsening under applied stress, resulting in an hourglass morphology. In contrast, the small B2-precipitates within the BCC-fragments dissolved during the elevated temperatures of FSLD and reprecipitated as substantially finer precipitates during continuous cooling post-FSLD. Additionally, the orientation relationships between the FCC and BCC/B2 phases were completely destroyed by the severe thermoplastic deformation inherent to FSLD. The microstructural refinements led to a substantial improvement in hardness from 177 HV to 283 HV, driven by Hall-Petch strengthening. The increased number of interfaces, including coherent BCC-B2 interfaces, potentially enhances the sink strength and radiation tolerance of the HEA, making it a promising candidate for nuclear applications. In conclusion, this study also highlights FSLD as a versatile technique for achieving tunable properties in HEAs, with detailed schematics illustrating the complex mechanisms of phase transformations during processing.

Additive Manufacturing↗

Microstructure and mechanical behavior of a TiC nanoprecipitate strengthened V Alloy

The V-4Cr-4Ti (V44) alloys have been proposed as the prime candidate structural material for self-cooled liquid Li blanket and other designs for fusion energy applications. However, the applications of the V44 alloy are limited to a narrow operation temperature window, due to reduction in creep strength at or above 700 °C and susceptibility to irradiation hardening and embrittlement when irradiated below 400 °C. Here, in this work, we explore the feasibility of designing a novel V alloy to form a high number density of TiC nanoprecipitates, in order to simultaneously improve creep strength and provide defect sinks to mitigate irradiation hardening. Computational thermodynamics was used to design a new alloy (V44C) to achieve our goal of high TiC nanoprecipitates density within the alloy V44 matrix. To ensure scalability, the new alloy was made through arc-melting and ingot-casting followed by hot forging, cold rolling and heat treatments of homogenization and precipitation aging. The microstructure was characterized by SEM, TEM, XRD and APT, confirming the existence of nanoprecipitates predicted in the thermodynamic calculations. In addition to microstructural evaluation tensile properties at room temperature and 700 °C, and Charpy impact energy at room temperature were measured. The microstructure and mechanical properties were then compared with those from a historic reference V44 alloy. The tensile strength improvement in V44C was rationalized based on particle and solid solution strengthening mechanism. The fracture behavior was discussed based on the fractography results and necking deformation behavior.

Alloys development↗

Role of geometric dynamic recrystallization in nanocrystalline alloys

Nanocrystalline and near-nano-grained metals are plagued with an overall lack of ductility and formability. This is in part due to their inability to support the dislocation mechanisms or undergo the same types of transformations that conventional coarse-grained metals access in order to increase their workability. Therefore, despite their advanced properties such as high strength, the manufacturing of such fine-grained metals, which exposes them to multi-axial states of stress in operations such as rolling, drawing, extrusion, forging, and bending, has not been possible. In this work, we address this limitation and highlight an important aspect of geometric dynamic recrystallization (GDRX) in nanocrystalline materials as a way to improve manufacturability. In particular, using two different alloy compositions and two different processing techniques, this study points to the fact that if nanocrystalline or near nano metals can be truly stabilized, they can repeatedly undergo the same types of processes that conventional coarse-grained metals endure, increasing both their formability and hence manufacturability. The results reveal that due to a large number of initial high-angle grain boundaries and large applied compressive strains, GDRX is activated in the absence of any discontinuous dynamic recrystallization (DDRX) or continuous dynamic recrystallization (CDRX). This is a unique aspect of stabilized nanocrystalline materials, as traditionally fine-grained metals are not microstructurally stable enough to accommodate such an event.

36 MATERIALS SCIENCE↗

Experiment design for the neutron irradiation of $\mathrm{PM-HIP}$ alloys for nuclear reactors

Here, this article describes the design of an Advanced Test Reactor (ATR) drop-in neutron irradiation experiment aiming to directly compare the performance of nuclear structural alloys fabricated by powder metallurgy with hot isostatic pressing (PM-HIP) against conventional casting or forging. There is growing interest in PM-HIP alloys for nuclear applications because of their microstructural uniformity, superior mechanical properties, and reduced dependence on welding and machining, compared to cast/forged alloys. Nuclear code-qualification of PM-HIP alloys requires neutron irradiation testing to demonstrate performance under relevant conditions. In this experiment, six nuclear structural alloys were irradiated: Ni-based alloys 625 and 690, Grade 91 ferritic steel, SA508 pressure vessel steel, and 304L and 316L austenitic stainless steels. The experiment is assembled into seven capsules in four test trains and irradiated in three ATR inboard A positions. Both the PM-HIP and cast/forged versions of each alloy were irradiated under nearly identical conditions for comparative purposes, to target doses of 1 ± 0.2 and 3 ± 0.2 dpa at temperatures of 300 ± 50 °C and 400 ± 50 °C. A thorough description of the experiment design and thermal, structural and neutronic analyses performed to ensure the targeted irradiation conditions are met is provided. Specimens were configured as small disks, compact tension specimens and tensile bars to facilitate post-irradiation examination (PIE) that will include mechanical testing, microstructure characterization, and fracture toughness testing. Given the considerations for ASTM standardized mechanical testing, comparative fluence and temperature across specimen pairs, and comprehensive PIE planning herein, this work serves as a template for future nuclear materials qualification experiment designs.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

The effect of oxygen enrichment on soot formation and thermal radiation in turbulent, non-premixed methane flames

Non-premixed oxy-fuel combustion of natural gas is used in industrial applications where high-intensity heat is required, such as glass manufacturing and metal forging and shaping. In these applications, the high flame temperatures achieved by oxy-fuel combustion increase radiative heat transfer to the surfaces of interest and soot formation within the flame is desired for further augmentation of radiation. However, the high cost of cryogenic air separation has limited the penetration of oxy-fuel combustion technologies. New approaches to air separation are being developed that may reduce oxygen production costs, but only for intermediate levels of oxygen enrichment of air. To determine the influence of oxygen enrichment on soot formation and radiation, we developed a non-premixed coannular burner in which oxygen concentrations and oxidizer flow rates can be independently varied, to distinguish the effects of turbulent mixing intensity from oxygen enrichment on soot formation and flame radiation. Local radiation intensities, soot concentrations, and soot temperatures have been measured using a thin-film thermopile, planar laser-induced incandescence (LII), and two-color imaging pyrometry, respectively. The measurements show that soot formation increases as the oxygen concentration decreases from 100% to 50%, helping to moderate a decrease in overall flame radiation. An increase in turbulence intensity has a marked effect on flame height, soot formation and thermal radiation, leading to decreases in all of these. The soot temperature decreases with a decrease in the oxygen concentration and increases with an increase in turbulent mixing intensity. Altogether, the results suggest that properly designed oxygen-enriched burners that enhance soot formation for intermediate levels of oxygen purity may be able to achieve thermal radiation intensities as high as 85% of traditional oxy-fuel burners utilizing high-purity oxygen.

03 NATURAL GAS↗

Alloy selective optical sorting of mixed post-consumer aluminum scrap streams

Shredded post-consumer non-ferrous scrap stream, also known as Zorba, contains a mixture of cast and wrought aluminum pieces with very different compositions. Cast Al pieces, with their high Si, Cu and Fe content, are a major contaminant in wrought scrap fraction, which results in downcycling of the mixed cast + wrought scrap into non-structural cast Al alloys and parts. Here, in this paper, we introduce a chemical treatment method to color-code scrap aluminum pieces by alloy family and demonstrate low-cost optical sorting of cast from wrought pieces to upgrade the scrap stream. We utilized non-acidic chemical solutions that react with (i.e., etch) the scrap pieces to produce colors based on the Al alloy chemistry of a given piece. Cast pieces with high Si and Cu fractions turned black, whereas the much leaner wrought pieces remained unreacted. We showed > 95% sorting efficiency of mixed cast and wrought pieces using a repurposed low-cost optical sorter originally designed for food sorting. We also colored wrought Al pieces by alloy families, such as 5xxx and 6xxx, using a two-step chemical etching technique, which has the potential to create a circular supply chain in which wrought aluminum alloys are sorted from the mixed scrap stream and recycled back to high-value wrought products such as sheets, extrusions, and forgings with minimal contamination from cast scrap.

Aluminum↗

Evolution of cellular dislocation structures and defects in additively manufactured austenitic stainless steel under ion irradiation

Here, the evolution of irradiation-induced defects in additively manufactured (AM) austenitic stainless steel was explored in situ by 1 MeV Kr ion irradiation at 450 and 600 °C in a transmission electron microscope. Cellular dislocation structure in AM steel act as sink/trap sites for the irradiation-induced defects, resulting in the lower density and smaller dislocation loops in AM steel than conventional forged (CF) steel at 450 °C. The higher stacking fault energy and local stress concentration induced by cellular dislocation structure in AM steel promotes the unfaulting process and the formation of network dislocation at 600 °C.

36 MATERIALS SCIENCE↗

Large thermal hysteresis in a single-phase NiTiNb shape memory alloy

Large thermal hysteresis ($T$ hys ) is favorable in shape memory alloys (SMAs) because it renders wide service and storage temperature range of the SMA-made parts. In this letter, we show that large intrinsic $T$ hys up to 100 K is achieved in a low Nb content (2 at.%), β-Nb-free and single-phase NiTiNb SMA fabricated by casting, forging, wire-drawing and annealing. Such a large $T$ hys is comparable to that of the widely used dual-phase NiTiNb SMAs in which high Nb content and β-Nb are required. By exploiting the grain-size-dependence of $T$ hys in our single-phase NiTiNb SMA and that in an equiatomic NiTi SMA, we attribute the large $T$ hys to the enhanced kinetic resistance of transformation by the small grains. In conclusion, the connection between the $T$ hys and the kinetic resistance is demonstrated by a modified dislocation-based kinetic model.

36 MATERIALS SCIENCE↗

Effect of feed-rod tilting on friction surfacing of steel

During the friction surfacing process, the forge-axial force, rotation rate, and traverse speed of the consumable feed-rod play crucial roles in determining the deposition rate and layer morphology. Although some researchers have studied the enhancement of deposition by introducing a backward tilt relative to the traverse direction, there has been limited investigation into the effects of other tilt orientations. Therefore, this study aims to provide a more comprehensive understanding of feed-rod tilting in friction surfacing. In this investigation, the consumable feed-rod undergoes tilting in four distinct directions: forward, backward, advancing side, and retreating side, each tested at two different tilt angles (1.5° and 3.0°). The results reveal that the feed-rod tilting can influence the deposition dynamics by altering the location and area of the rubbing interface situated between the feed-rod and the substrate. Moreover, the feed-rod tilting can significantly enhance the bond width, deposition rate, and deposition efficiency. The enhancement in deposition efficiency signifies a successful reduction in flash formation. Furthermore, a distinct layered microstructure is evident within each deposition layer, regardless of tilt conditions, indicating the unique deposition process inherent to friction surfacing. Finally, the innovative approach proposed in this study not only offers a straightforward and feasible means to improve deposition rate and efficiency but also expands the potential for constructing more intricate geometries or authentic surfaces.

36 MATERIALS SCIENCE↗

Reduction kinetics of hematite powder using argon/hydrogen plasma with prospects for near net shaping of sustainable iron

Direct reduction of iron ore using hydrogen plasma is being explored as a potential solution to decarbonize the iron and steel sector. The current state-of-the-art demonstrated reduction of hematite pellets via hydrogen plasma using Ar + 10% H 2 but had slow reduction kinetics, requiring 30 minutes of plasma exposure for complete reduction. Here we show that using hematite in a powder form, easily obtainable from beneficiated ore, results in 10× faster kinetics using plasma generated from Ar + 2% H 2 shielding gas compared to the current state-of-the art. Additionally, the increased kinetics using powders and a dilute hydrogen concentration can enable the use of advanced manufacturing techniques like blown powder directed energy deposition using a plasma tungsten arc welding torch to manufacture near net shape components directly from the ore concentrates. This ore to part approach will also reduce the emissions associated with downstream processes like rolling, forging, and machining, thereby further aiding in the sectorial decarbonization efforts.

36 MATERIALS SCIENCE↗

Directing Charge Transfer in Quantum Dot Assemblies

The optical and electronic properties of semiconductor quantum dots (QDs) make them attractive candidates for applications in photovoltaics, spintronics, photocatalysis, and optoelectronics. Understanding how to control the flow of charge in QD assemblies is essential for realizing novel applications. This Account explores some unique characteristics of charge transport in QD dyads, triads, and their assemblies. The emerging features of these assemblies that provide new opportunities to manipulate charge flow at the nanoscale are (1) cascading energy landscapes and band offsets to inhibit charge recombination, (2) electrostatic fields that direct charge flow through QD–QD and QD-conjugated polymer junctions, and (3) QD chirality and chiral imprinting that promotes vectorial electron and spin selective transport. Charge flow kinetics is determined by a combination of familiar electron transfer parameters (reaction free energy, reorganization energy, and electronic coupling), donor and acceptor electronic densities of states, and internal electric fields. Electron transfer and electronic structure theory, combined with kinetic modeling, place the measured kinetics of QD electron transfer donor–acceptor assemblies into a unified conceptual context. The experimental transfer rates measured in these systems depend upon structure and the internal electric fields that are present in the assemblies. A negatively charged donor and positively charged acceptor, for example, facilitates (inhibits) electron (hole) transfer, while an electric field of opposite orientation (reversal of charges) inhibits (promotes) electron (hole) transfer. These and other emerging rules that govern charge flow in NP assemblies provide a strategy to design the directionality and yield of interfacial charge transport. Chirality at the nanoscale can induce spin selective charge transport, providing new ways to direct charge (and spin) flow in QD assemblies. Magnetoresistance and magnetic conductive probe atomic force microscopy experiments show spin selective electron transport for chirally imprinted QD assemblies. Photoinduced electron transfer from achiral donor-QDs to chiral acceptor-QDs depends on the electron spin and chiroptical properties of the acceptor-QDs. These assemblies show transport characteristics that correlate with features of the QDs’ circular dichroism spectra, presenting intriguing challenges to theory, and indicating that spectroscopic signatures may assist in the design and diagnosis of functional molecular assemblies. Theoretical and experimental studies of charge transport in well-defined QD assemblies are establishing design principles for vectorial charge transport and are also refining questions surrounding the mechanism and control of these processes. Finally, these intensified efforts are forging links between fundamental discoveries regarding mechanism and practical applications for these novel assembled nanostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analytic Nuclear Gradients for Complete Active Space Linearized Pair-Density Functional Theory

Accurately modeling photochemical reactions is difficult due to the presence of conical intersections and locally avoided crossings, as well as the inherently multiconfigurational character of excited states. As such, one needs a multistate method that incorporates state interaction in order to accurately model the potential energy surface at all nuclear coordinates. The recently developed linearized pair-density functional theory (L-PDFT) is a multistate extension of multiconfiguration PDFT, and it has been shown to be a cost-effective post-MCSCF method (as compared to more traditional and expensive multireference many-body perturbation methods or multireference configuration interaction methods) that can accurately model potential energy surfaces in regions of strong nuclear–electronic coupling in addition to accurately predicting Franck–Condon vertical excitations. Here, in this paper, we report the derivation of analytic gradients for L-PDFT and their implementation in the PySCF-forge software, and we illustrate the utility of these gradients for predicting ground- and excited-state equilibrium geometries and adiabatic excitation energies for formaldehyde, s-trans-butadiene, phenol, and cytosine.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Predicting Adsorption Properties of Catalytic Descriptors on Bimetallic Nanoalloys with Site-Specific Precision

Bimetallic nanoparticles present a vastly tunable structural and compositional design space rendering them promising materials for catalytic and energy applications. Yet it remains an enduring challenge to efficiently screen candidate alloys with atomic level specificity while explicitly accounting for their inherent stabilities under reaction conditions. Herein, by leveraging correlations between binding energies of metal adsorption sites and metal–adsorbate complexes, we predict adsorption energies of typical catalytic descriptors (OH*, CH 3 *, CH*, and CO*) on bimetallic alloys with site-specific resolution. We demonstrate that our approach predicts adsorption energies on top and bridge sites of bimetallic nanoparticles having generic morphologies and chemical environments with errors between 0.09 and 0.18 eV. By forging a link between the inherent stability of an alloy and the adsorption properties of catalytic descriptors, we can now identify active site motifs in nanoalloys that possess targeted catalytic descriptor values while being thermodynamically stable under working conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Consideration of the Aluminum Distribution in Zeolites in Theoretical and Experimental Catalysis Research

Research efforts in zeolite catalysis have become increasingly cognizant of the diversity in structure and function resulting from the distribution of framework aluminum atoms, through emerging reports of catalytic phenomena that fall outside those recognizable as the shape-selective ones emblematic of its earlier history. Molecular-level descriptions of how active-site distributions affect catalysis are an aspirational goal articulated frequently in experimental and theoretical research, yet they are limited by imprecise knowledge of the structure and behavior of the zeolite materials under interrogation. In experimental research, higher precision can result from more reliable control of structure during synthesis and from more robust and quantitative structural and kinetic characterization probes. In theoretical research, construction of models with specific aluminum locations and distributions seldom capture the heterogeneity inherent to the materials studied by experiment. In this Perspective, we discuss research findings that appropriately frame the challenges in developing more predictive synthesis-structure-function relations for zeolites, highlighting studies on ZSM-5 zeolites that are among the most structurally complex molecular sieve frameworks and the most widely studied because of their versatility in commercial applications. We discuss research directions to address these challenges and forge stronger connections between zeolite structure, composition, and active sites to catalytic function. Such connections promise to aid in bridging the findings of theoretical and experimental catalysis research, and transforming zeolite active site design from an empirical endeavor into a more predictable science founded on validated models.

09 BIOMASS FUELS↗

Revolutionizing Energy Storage: AI, Automation, and Advanced Modeling as Catalysts for Next-Generation Breakthroughs

The Presidential Symposium (PRES) at the 2025 Fall Meeting, hosted by the President’s Office and Energy and Fuels Division, American Chemical Society (ACS) in Washington, DC, brought together a diverse group of chemists, engineers, and materials scientists working in battery materials & systems, automation and artificial intelligence from academia, industry, and national laboratories. The accelerating demand for high-performance, scalable, and sustainable energy storage has catalyzed a paradigm shift in how materials are dis-covered, devices are engineered, and systems are optimized. This Presidential Symposium, entitled “Revolutionizing Energy Storage: AI, Automation, and Advanced Modeling Driving Next-Gen Breakthroughs”, brings together global leaders to unveil transformative strategies anchored in the AAA framework: Artificial Intelligence, Automation, and Advanced Modeling. Artificial Intelligence is redefining the frontiers of energy storage by enabling predictive design, real-time optimization, and intelligent control across diverse chemistries and architectures. Automation is streamlining the synthesis, characterization, and testing of battery materials, dramatically accelerating innovation cycles and unlocking scalable solutions for grid and mobility applications. Advanced Modeling, spanning atomic to system-level scales, provides unprecedented insight into electrochemical dynamics, degradation pathways, and thermal behavior, particularly when coupled with physics-informed machine learning and digital twin technologies. Digital twins, in turn, leverage the AAA framework by integrating real-time data, physics-based models, and AI predictions into dynamic virtual replicas, enabling proactive diagnostics, optimization, and system resilience. Together, these synergistic pillars are not only re-shaping the scientific landscape but also forging a new era of reproducible, data-driven, and resilient energy storage innovation. In conclusion, this symposium marks a pivotal moment in the convergence of computational intelligence and experimental rigor, charting the course for next-generation breakthroughs in lithium-ion, solid-state, and flow battery technologies.

Artificial Intelligence (AI)↗