Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fermi level”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Thermoelectric properties of epitaxial ScN films deposited by reactive magnetron sputtering onto MgO(001) substrates

Epitaxial ScN(001) thin films were grown on MgO(001) substrates by dc reactive magnetron sputtering. The deposition was performed in an Ar/N{sub 2} atmosphere at 2 Multiplication-Sign 10{sup -3} Torr at a substrate temperature of 850 Degree-Sign C in a high vacuum chamber with a base pressure of 10{sup -8} Torr. In spite of oxygen contamination of 1.6 {+-} 1 at. %, the electrical resistivity, electron mobility, and carrier concentration obtained from a typical film grown under these conditions by room temperature Hall measurements are 0.22 m{Omega} cm, 106 cm{sup 2} V{sup -1} s{sup -1}, and 2.5 Multiplication-Sign 10{sup 20} cm{sup -3}, respectively. These films exhibit remarkable thermoelectric power factors of 3.3-3.5 Multiplication-Sign 10{sup -3} W/mK{sup 2} in the temperature range of 600 K to 840 K. The cross-plane thermal conductivity is 8.3 W/mK at 800 K yielding an estimated ZT of 0.3. Theoretical modeling of the thermoelectric properties of ScN calculated using a mean-free-path of 23 nm at 300 K is in very good agreement with the experiment. These results also demonstrate that further optimization of the power factor of ScN is possible. First-principles density functional theory combined with the site occupancy disorder technique was used to investigate the effect of oxygen contamination on the electronic structure and thermoelectric properties of ScN. The computational results suggest that oxygen atoms in ScN mix uniformly on the N site forming a homogeneous solid solution alloy. Behaving as an n-type donor, oxygen causes a shift of the Fermi level in ScN into the conduction band without altering the band structure and the density of states.

36 MATERIALS SCIENCE↗

Sulfur passivation of surface electrons in highly Mg-doped InN

Electron accumulation with a sheet density greater than 10{sup 13} cm{sup −2} usually occurs at InN surfaces. Here, the effects of treatment with ammonium sulfide ((NH{sub 4}){sub 2}S{sub x}) on the surface electronic properties of highly Mg-doped InN (>4×10{sup 18} cm{sup −3}) have been investigated with high resolution x-ray photoemission spectroscopy. The valence band photoemission spectra show that the surface Fermi level decreases by approximately 0.08 eV with (NH{sub 4}){sub 2}S{sub x} treatment, resulting in a decrease of the downward band bending and up to a 70% reduction in the surface electron sheet density.

36 MATERIALS SCIENCE↗

Effect of low-temperature annealing on the electronic- and band-structures of (Ga,Mn)As epitaxial layers

The effect of outdiffusion of Mn interstitials from (Ga,Mn)As epitaxial layers, caused by post-growth low-temperature annealing, on their electronic- and band-structure properties has been investigated by modulation photoreflectance (PR) spectroscopy. The annealing-induced changes in structural and magnetic properties of the layers were examined with high-resolution X-ray diffractometry and superconducting quantum interference device magnetometry, respectively. They confirmed an outdiffusion of Mn interstitials from the layers and an enhancement in their hole concentration, which were more efficient for the layer covered with a Sb cap acting as a sink for diffusing Mn interstitials. The PR results demonstrating a decrease in the band-gap-transition energy in the as-grown (Ga,Mn)As layers, with respect to that in the reference GaAs one, are interpreted by assuming a merging of the Mn-related impurity band with the GaAs valence band. Whereas an increase in the band-gap-transition energy caused by the annealing treatment of the (Ga,Mn)As layers is interpreted as a result of annealing-induced enhancement of the free-hole concentration and the Fermi level location within the valence band. The experimental results are consistent with the valence-band origin of itinerant holes mediating ferromagnetic ordering in (Ga,Mn)As, in agreement with the Zener model for ferromagnetic semiconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ferromagnetic ordering of Cr and Fe doped p-type diamond: An ab initio study

Ferromagnetic ordering of transition metal dopants in semiconductors holds the prospect of combining the capabilities of semiconductors and magnetic systems in single hybrid devices for spintronic applications. Various semiconductors have so far been considered for spintronic applications, but low Curie temperatures have hindered room temperature applications. We report ab initio DFT calculations on the stability and magnetic properties of Fe and Cr impurities in diamond, and show that their ground state magnetic ordering and stabilization energies depend strongly on the charge state and type of co-doping. We predict that divacancy Cr{sup +2} and substitutional Fe{sup +1} order ferromagnetically in p-type diamond, with magnetic stabilization energies (and magnetic moment per impurity ion) of 16.9 meV (2.5 μ{sub B}) and 33.3 meV (1.0 μ{sub B}), respectively. These magnetic stabilization energies are much larger than what has been achieved in other semiconductors at comparable impurity concentrations, including the archetypal dilute magnetic semiconductor GaAs:Mn. In addition, substitutional Fe{sup +1} exhibits a strong half-metallic character, with the Fermi level crossing bands in only the spin down channel. These results, combined with diamond’s extreme properties, demonstrate that Cr or Fe dopedp-type diamond may successfully be considered in the search for room temperature spintronic materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Negative differential conductivity of metal-insulator-metal tunneling structures

The tunneling characteristics of a metal-insulator-metal junction are calculated in the framework of the two-band model, which takes into account the presence of the valence band for the insulator layer. It is demonstrated that, in the case where the Fermi level E{sub F} of the structure under investigation lies below the middle of the band gap of the insulator, the dependence of the tunneling current on the bias voltage across the junction contains portions with a negative differential resistance at V > E{sub F}/e. The iron-aluminum oxide-iron magnetoresistive junctions are considered as samples in which the effect under discussion can be observed. It is shown that, in the given case, the appearance of a portion with a negative differential resistance should be expected at voltages exceeding the Fermi energy E{sub F{sub 1}} for the spin-up electron band.

36 MATERIALS SCIENCE↗

Common Origin of the Circular-dichroism Pattern in ARPES of SrTiO3 and CuxBi2Se3

We investigate circular dichroism in the angular distribution (CDAD) of photoelectrons from SrTiO{sub 3}:Nb and Cu{sub x}Bi{sub 2}Se{sub 3} recorded by 7-eV laser ARPES. In addition to the well-known node that occurs in CDAD when the incidence plane matches the mirror plane of the crystal, we show that another type of node occurs when the mirror plane of the crystal is vertical to the incidence plane and the electronic state is two dimensional. The flower-shaped CDAD's occurring around the Fermi level of SrTiO{sub 3}:Nb and around the Dirac point of Cu{sub x}Bi{sub 2}Se{sub 3} are explained on equal footings. A surface-state-to-surface-resonance transition is indicated for the topological state of Cu{sub x}Bi{sub 2}Se{sub 3}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Point contact Andreev spectroscopy of epitaxial Co{sub 2}FeSi Heusler alloys on GaAs (001)

The predicted half-metallicity of Co{sub 2}FeSi in combination with its high Curie temperature of above 980 K makes this Heusler alloy interesting for spinelectronics. Thin Co{sub 2}FeSi films are grown by molecular-beam epitaxy on GaAs (001) with a close lattice match. We present a study of point-contact measurements on different films, varying in thickness between 18 nm and 48 nm and in substrate temperature during deposition between 100 deg. C and 300 deg. C. Transport spin polarizations at the Fermi level are determined from differential conductance curves obtained by point-contact Andreev-reflection spectroscopy. A maximum transport spin polarization of about 60% is measured for a 18 nm thin Co{sub 2}FeSi film grown at 200 deg. C.

36 MATERIALS SCIENCE↗

Identifying Dirac cones in carbon allotropes with square symmetry

A theoretical study is conducted to search for Dirac cones in two-dimensional carbon allotropes with square symmetry. By enumerating the carbon atoms in a unit cell up to 12, an allotrope with octatomic rings is recognized to possess Dirac cones under a simple tight-binding approach. The obtained Dirac cones are accompanied by flat bands at the Fermi level, and the resulting massless Dirac-Weyl fermions are chiral particles with a pseudospin of S = 1, rather than the conventional S = 1/2 of graphene. The spin-1 Dirac cones are also predicted to exist in hexagonal graphene antidot lattices.

74 ATOMIC AND MOLECULAR PHYSICS↗

Diameter-selective alignment of carbon nanotubes on Si(001) stepped surfaces

We report total-energy electronic-structure calculations based on the density-functional theory that provide stable adsorption sites, structural characteristics, and energy bands of carbon nanotubes (CNTs) adsorbed on the Si(001) stepped surfaces. We choose (5,5), (9,9), and (13,13) armchair CNTs with the diameters of 6.8 Å, 12.2 Å, and 17.6 Å, respectively, as representatives of CNTs and explore all the possible adsorption sites either on the terrace or at step edges. We find that the (9,9) CNT is most favorably adsorbed at the edge of the double-layer step D{sub B} along the 〈110〉 direction, whereas the (5,5) and (13,13) CNTs favor the terrace site where the CNTs are perpendicular to the Si dimer rows. This finding is indicative of the diameter-selective self-organized alignment of CNTs by exploiting the Si surface steps along the particular direction. We also find that the electronic structure of each CNT is modified upon adsorption depending on the adsorption site and the diameter of the CNTs. In particular, the (9,9) CNT at the most stable step edge site becomes semiconducting and the resultant valence and conduction bands exhibit nearly linear dispersion with the effective mass of 0.085 m{sub 0} (m{sub 0}: bare electron mass), preserving the characteristics of the Dirac electrons. We also find that the flat bands appear near the Fermi level (E{sub F}) when the (13,13) CNT is adsorbed at the metastable D{sub B} step edge, inferring that spin polarization is possible for the CNT on the Si(001) stepped surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SiN-SiC nanofilm: A nano-functional ceramic with bipolar magnetic semiconducting character

Nowadays, functional ceramics have been largely explored for application in various fields. However, magnetic functional ceramics for spintronics remain little studied. Here, we propose a nano-functional ceramic of sphalerite SiN-SiC nanofilm with intrinsic ferromagnetic order. Based on first principles calculations, the SiN-SiC nanofilm is found to be a ferromagnetic semiconductor with an indirect band gap of 1.71 eV. By mean field theory, the Curie temperature is estimated to be 304 K, close to room temperature. Furthermore, the valence band and conduction band states of the nanofilm exhibit inverse spin-polarization around the Fermi level. Thus, the SiN-SiC nanofilm is a typical bipolar magnetic semiconductor in which completely spin-polarized currents with reversible spin polarization can be created and controlled by applying a gate voltage. Such a nano-functional ceramic provides a possible route for electrical manipulation of carrier's spin orientation.

36 MATERIALS SCIENCE↗

Stacking-dependent electronic property of trilayer graphene epitaxially grown on Ru(0001)

The growth, atomic structure, and electronic property of trilayer graphene (TLG) on Ru(0001) were studied by low temperature scanning tunneling microscopy and spectroscopy in combined with tight-binding approximation (TBA) calculations. TLG on Ru(0001) shows a flat surface with a hexagonal lattice due to the screening effect of the bottom two layers and the AB-stacking in the top two layers. The coexistence of AA- and AB-stacking in the bottom two layers leads to three different stacking orders of TLG, namely, ABA-, ABC-, and ABB-stacking. STS measurements combined with TBA calculations reveal that the density of states of TLG with ABC- and ABB-stacking is characterized by one and two sharp peaks near to the Fermi level, respectively, in contrast to the V-shaped feature of TLG with ABA-stacking. Our work demonstrates that TLG on Ru(0001) might be an ideal platform for exploring stacking-dependent electronic properties of graphene.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dependence of Electronic Structure of SrRuO3 and the Degree of Correlation on Cation Off-Stoichiometry

We have grown and studied high quality SrRuO{sub 3} films grown by MBE as well as PLD. By changing the oxygen activity during deposition we were able to make SrRuO{sub 3} samples that were stoichiometric (low oxygen activity) or with ruthenium vacancies (high oxygen activity). Samples with strontium vacancies were found impossible to produce since the ruthenium would precipitate out as RuO{sub 2}. The volume of the unit cell of SrRuO{sub 3} becomes larger as more ruthenium vacancies are introduced. The residual resistivity ratio (RRR) and room temperature resistivity were found to systematically depend on the volume of the unit cell and therefore on the amount of ruthenium vacancies. The RRR varied from {approx}30 for stoichiometric samples to less than two for samples that were very ruthenium poor. The room temperature resistivity varied from 190 {micro}{Omega} cm for stoichoimetric samples to over 300 {micro}{Omega} cm for very ruthenium poor samples. UPS spectra show a shift of weight from the coherent peak to the incoherent peak around the Fermi level when samples have more ruthenium vacancies. Core level XPS spectra of the ruthenium 3d lines show a strong screened part in the case of stoichiometric samples. This screened part disappears when ruthenium vacancies are introduced. Both the UPS and the XPS results are consistent with the view that correlation increases as the amount of ruthenium vacancies increase.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetic moment enhancement and spin polarization switch of the manganese phthalocyanine molecule on an IrMn(100) surface

The geometric, electronic, and magnetic structures of a manganese phthalocyanine (MnPc) molecule on an antiferromagnetic IrMn(100) surface are studied by density functional theory calculations. Two kinds of orientation of the adsorbed MnPc molecule are predicted to coexist due to molecular self-assembly on the surface—a top-site geometry with the Mn–N bonds aligned along the 〈100〉 direction, and a hollow-site orientation in which the Mn–N bonds are parallel to the 〈110〉 direction. The MnPc molecule is antiferromagnetically coupled to the substrate at the top site with a slight reduction in the magnetic moment of the Mn atom of the MnPc molecule (Mn{sub mol}). In contrast, the magnetic moment of the Mn{sub mol} is enhanced to 4.28 μB at the hollow site, a value larger than that in the free MnPc molecule (3.51 μB). Molecular distortion induced by adsorption is revealed to be responsible for the enhancement of the magnetic moment. Furthermore, the spin polarization of the Mn{sub mol} atom at around the Fermi level is found to change from negative to positive through an elongation of the Mn–N bonds of the MnPc. We propose that a reversible switch of the low/high magnetic moment and negative/positive spin polarization might be realized through some mechanical engineering methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High performance p-type NiO{sub x} thin-film transistor by Sn doping

Major obstacles towards power efficient complementary electronics employing oxide thin-film transistors (TFTs) lie in the lack of equivalent well performing p-channel devices. Here, we report a significant performance enhancement of solution-processed p-type nickel oxide (NiO{sub x}) TFTs by introducing Sn dopant. The Sn-doped NiO{sub x} (Sn-NiO{sub x}) TFTs annealed at 280 °C demonstrate substantially improved electrical performances with the increase in the on/off current ratio (I{sub on}/I{sub off}) by ∼100 times, field-effect mobility (μ{sub lin}) by ∼3 times, and the decrease in subthreshold swing by half, comparing with those of pristine NiO{sub x} TFTs. X-ray photoelectron spectroscopy and X-ray diffraction results confirm that Sn atoms tend to substitute Ni sites and induce more amorphous phase. A decrease in density of states in the gap of NiO{sub x} by Sn doping and the shift of Fermi level (E{sub F}) into the midgap lead to the improvements of TFT performances. As a result, Sn-NiO{sub x} can be a promising material for the next-generation, oxide-based electronics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic Structure of FeSe Monolayer Superconductors: Shallow Bands and Correlations

Electronic spectra of typical single FeSe layer superconductor—FeSe monolayer film on SrTiO{sub 3} substrate (FeSe/STO) obtained from ARPES data reveal several puzzles: what is the origin of shallow and the so called “replica” bands near the M-point and why the hole-like Fermi surfaces near the Γ-point are absent. Our extensive LDA+DMFT calculations show that correlation effects on Fe-3d states can almost quantitatively reproduce rather complicated band structure, which is observed in ARPES, in close vicinity of the Fermi level for FeSe/STO. Rather unusual shallow electron-like bands around the M-point in the Brillouin zone are well reproduced. Detailed analysis of the theoretical and experimental quasiparticle bands with respect to their origin and orbital composition is performed. It is shown that for FeSe/STO system the LDA calculated Fe-3d{sub xy} band, renormalized by electronic correlations within DMFT gives the quasiparticle band almost exactly in the energy region of the experimentally observed “replica” quasiparticle band at the Mpoint. However, correlation effects alone are apparently insufficient to eliminate the hole-like Fermi surfaces around the Γ-point, which are not observed in most ARPES experiments. The Fermi surfaces remain here even if Coulomb and/or Hund interaction strengths are increased while overall agreement with ARPES worsens. Increase of number of electrons also does not lead to vanishing of this Fermi surface and makes agreement of LDA+DMFT results with ARPES data much worse. We also present some simple estimates of “forward scattering” electron-optical phonon interaction at FeSe/STO interface, showing that it is apparently irrelevant for the formation of “replica” band in this system and significant increase of superconducting T{sub c}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Properties of amorphous carbon thin films grown by ion beam sputtering

The electrical performance of amorphous carbon thin films obtained by the ion beam sputtering of a carbon target in argon has been investigated. It has been shown by the Raman spectroscopy method that these films have a graphite-like structure. It has also been found by conductivity and thermopower studies that the hopping mechanism of conductivity with a variable length of hops over localized states near the Fermi level changes to the mechanism of hopping over the nearest neighbors as the temperature rises from 77 to 190 K. Near room temperature, electrotransport is provided by variable-length hops over localized states at the tail of the valence band.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Angle-resolved photoemission spectroscopy (ARPES) studies of cuprate superconductors

This dissertation is comprised of three different angle-resolved photoemission spectroscopy (ARPES) studies on cuprate superconductors. The first study compares the band structure from two different single layer cuprates Tl 2 Ba 2 CuO 6+δ (Tl2201) T c, max ≈ 95 K and (Bi 1.35 Pb 0.85 )(Sr 1.47 La 0.38 )CuO 6+δ (Bi2201) T c, max ≈ 35 K. The aim of the study was to provide some insight into the reasons why single layer cuprate's maximum transition temperatures are so different. The study found two major differences in the band structure. First, the Fermi surface segments close to (π,0) are more parallel in Tl2201 than in Bi2201. Second, the shadow band usually related to crystal structure is only present in Bi2201, but absent in higher T c Tl2201. The second study looks at the different ways of doping Bi 2 Sr 2 CaCu 2 O 8+δ (Bi2212) in-situ by only changing the post bake-out vacuum conditions and temperature. The aim of the study is to systematically look into the generally overlooked experimental conditions that change the doping of a cleaved sample in ultra high vacuum (UHV) experiments. The study found two major experimental facts. First, in inadequate UHV conditions the carrier concentration of Bi2212 increases with time, due to the absorption of oxygen from CO 2 /CO molecules, prime contaminants present in UHV systems. Second, in a very clean UHV system at elevated temperatures (above about 200 K), the carrier concentration decreases due to the loss of oxygen atoms from the Bi-O layer. The final study probed the particle-hole symmetry of the pseudogap phase in high temperature superconducting cuprates by looking at the thermally excited bands above the Fermi level. The data showed a particle-hole symmetric pseudogap which symmetrically closes away from the nested FS before the node. The data is consistent with a charge density wave (CDW) origin of the pseudogap, similar to STM checkerboard patterns in the pseudogap state.

36 MATERIALS SCIENCE↗

Correlation between structure and electrical transport in ion-irradiated graphene grown on Cu foils

Graphene grown by chemical vapor deposition and supported on SiO2 and sapphire substrates was studied following controlled introduction of defects induced by 35 keV carbon ion irradiation. Changes in Raman spectra following fluences ranging from 1012 cm-2 to 1015 cm-2 indicate that the structure of graphene evolves from a highly-ordered layer, to a patchwork of disordered domains, to an essentially amorphous film. These structural changes result in a dramatic decrease in the Hall mobility by orders of magnitude while, remarkably, the Hall concentration remains almost unchanged, suggesting that the Fermi level is pinned at a hole concentration near 1x1013 cm-2. A model for scattering by resonant scatterers is in good agreement with mobility measurements up to an ion fluence of 1x1014 cm-2.

36 MATERIALS SCIENCE↗