Search NASA⌕ Search

SEARCH · Search NASA

Results for “Field Data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Growth-phase thinning of the near-Earth current sheet during the CDAW 6 substorm

The thinning of the near-Earth current sheet during the growth phase of the Coordinated Data Analysis Workshop (CDAW) 6 magnetospheric substorm is studied. The expansion onset of the substorm occurred at 1054 UT, March 22, 1979. During the growth phase, two spacecraft, International Sun Earth Explorer (ISEE) 1 and ISEE 2, were within the current sheet approximately 13 R(sub E) from the Earth and obtained simultaneous high-resolution magnetic data at two points in the current sheet. Plasma data were also provided by the ISEE spacecraft and solar wind data by IMP 8. To facilitate the analysis, the GSM magnetic field data are transformed to a 'neutral sheet coordinate system' in which the new x axis is parallel to the average magnetic field above and below the neutral sheet and the new y axis lies in the GSM equatorial plane. A model based on the assumption that the current sheet is a time-invariant structure fails to predict neutral sheet crossing times. Consequently, the Harris sheet model, which allows one to remove the restriction of time invariancy, is used instead. It is found that during the growth phase, a model parameter corresponding to the thickness of the current sheet decreased exponentially from about 5 R(sub E) to 1 R(sub E) with a time constant of about 14 min. In addition, the ISEE 1 and ISEE 2 neutral sheet crossings after expansion onset indicate that the neutral sheet was moving upward at 7 km/s relative to the spacecraft. Since both crossings occurred in approximately 80 s, the current sheet thickness is estimated to be about 500 km. These results demonstrate that the near-Earth current sheet undergoes dramatic thinning during the substorm growth phase and expansion onset.

Sanny, Jeff↗

Coso Geothermal Spectral Library for Rocks and Minerals

An integrated open mineral spectral library designed to enhance the utility and precision of mineral spectral data for geothermal exploration, developed from a reliable and comprehensive digital dataset for seamless sharing by integrating field data, the USGS spectral library, and pertinent information obtained from Coso geothermal field (Coso) in California. The ASD FieldSpec portable spectrometer was utilized for collecting spectral data, which was subsequently analyzed using the THOR Material Identification tool in ENVI, The Spectral Geologist (TSG) software by CSIRO, and the Fully Constrained Linear Spectral Unmixing algorithm (FCLSU) in MATLAB. Scanning Electron Microscopy (SEM) with a mineralogy-analyzing function was employed to assess the mineral composition of samples, ensuring precise mineralogical analysis. A portable X-ray fluorescence (pXRF) spectrometer was also utilized to gather information on elemental enrichment. A framework for developing spectra data and establishing spectral libraries for various geological cases was proposed within this study. The characteristic spectra of six alteration minerals - alunite, chalcedony, epidote, hematite, kaolinite, and opal - were acquired from Coso samples. The spectral library for the Coso alteration minerals was introduced for further application in academic study or industrial exploration. To browse the Coso Geothermal Spectral data and related figures from spreadsheets: #1 Unzip and store the following items in the same folder. 'Contact Probe Data.zip', 'Sample Photos.zip', and 'Coso spectra of higher-certainity minerals.xlsx'. #2 Open 'Coso spectra of higher-certainity minerals.xlsx'. The hyperlinks in the spreadsheet lead to the folders or figures of: spectra .asd file, spectra ASC II file, spectra plots, and sample photos. The spectra data is raw data without splice correction. Spectra .asd files require particular software to open. (These cannot be opened in GIS software such as ArcGIS.) Spectra ASC II files can be opened in a text editor or spread sheet program.

15 GEOTHERMAL ENERGY↗

A Broadband Laboratory Study of the Seismic Properties of Cracked and Fluid-Saturated Synthetic Glass Media

In this paper, for better understanding of frequency dependence (dispersion) of seismic wave velocities caused by stress-induced fluid flow, broadband laboratory measurements were performed on a suite of synthetic glass media containing both equant pores and thermal cracks. Complementary forced oscillation, resonant bar, and ultrasonic techniques provided access to millihertz-hertz frequencies, ~1 kHz frequency, and ~1 MHz frequency, respectively. The wave speeds or effective elastic moduli and associated dissipation were measured on samples under dry, argon- or nitrogen-saturated, and water-saturated conditions in sequence. The elastic moduli, in situ permeability, and crack porosity inferred from in situ X-ray computed tomography all attest to strong pressure-induced crack closure for differential (confining-minus-pore) pressures <30 MPa, consistent with zero-pressure crack aspect ratios <4 × 10 -4 . The low permeabilities of these materials allow access to undrained conditions, even at subhertz frequencies. The ultrasonically measured elastic moduli reveal consistently higher shear and bulk moduli upon fluid saturation—diagnostic of the saturated-isolated regime. For a glass rod specimen, containing cracks but no pores, saturated-isolated conditions apparently persist to subhertz frequencies—requiring in situ aspect ratios (minimum/maximum dimension) <10 -5 . In marked contrast, the shear modulus measured at subhertz frequencies on a cracked glass bead specimen of 5% porosity, is insensitive to fluid saturation, consistent with the Biot-Gassmann model for the saturated-isobaric regime. Finally, the measured dispersion of the shear modulus approaches 10% over the millihertz-megahertz frequency range for the cracked and fluid-saturated media—implying that laboratory ultrasonic data should be used with care in the interpretation of field data.

58 GEOSCIENCES↗

Interplay of River and Tidal Forcings Promotes Loops in Coastal Channel Networks

We report the dense populations that inhabit global coastlines have an uncertain future due to increased flooding, storms, and human modification. The channel networks of deltas and marshes that plumb these coastlines present diverse architectures, including well-studied dendritic topologies. However, the quasi-stable loops that exist in nearly all coastal networks have not yet been explained. We present a model for self-organizing networks inspired by vascular biophysics to show that loops emerge when the relative forcings between rivers and tides are comparable, resulting in interplay between hydrodynamic forcings at short time scales relative to network evolution. Using field data and satellite imaging, we confirm this control on 21 field networks. Our comparison provides compelling evidence that hydrodynamic fluctuations are capable of stabilizing loops in geophysical systems.

54 ENVIRONMENTAL SCIENCES↗

FIRST THREE-DIMENSIONAL RECONSTRUCTIONS OF CORONAL LOOPS WITH THE STEREO A+B SPACECRAFT. III. INSTANT STEREOSCOPIC TOMOGRAPHY OF ACTIVE REGIONS

Here we develop a novel three-dimensional (3D) reconstruction method of the coronal plasma of an active region by combining stereoscopic triangulation of loops with density and temperature modeling of coronal loops with a filling factor equivalent to tomographic volume rendering. Because this method requires only a stereoscopic image pair in multiple temperature filters, which are sampled within {approx}1 minute with the recent STEREO/EUVI instrument, this method is about four orders of magnitude faster than conventional solar rotation-based tomography. We reconstruct the 3D density and temperature distribution of active region NOAA 10955 by stereoscopic triangulation of 70 loops, which are used as a skeleton for a 3D field interpolation of some 7000 loop components, leading to a 3D model that reproduces the observed fluxes in each stereoscopic image pair with an accuracy of a few percents (of the average flux) in each pixel. With the stereoscopic tomography we infer also a differential emission measure distribution over the entire temperature range of T {approx} 10{sup 4}-10{sup 7}, with predictions for the transition region and hotter corona in soft X-rays. The tomographic 3D model provides also large statistics of physical parameters. We find that the extreme-ultraviolet loops with apex temperatures of T{sub m} {approx}< 3.0 MK tend to be super-hydrostatic, while hotter loops with T{sub m} {approx} 4-7 MK are near-hydrostatic. The new 3D reconstruction model is fully independent of any magnetic field data and is promising for future tests of theoretical magnetic field models and coronal heating models.

99 GENERAL AND MISCELLANEOUS↗

Standard, Random, and Optimum Array conversions from Two-Pole resistance data

We present an array evaluation of standard and nonstandard arrays over a hydrogeological target. We develop the arrays by linearly combining data from the pole-pole (or 2-pole) array. The first test shows that reconstructed resistances for the standard Schlumberger and dipoledipole arrays are equivalent or superior to the measured arrays in terms of noise, especially at large geometric factors. The inverse models for the standard arrays also confirm what others have presented in terms of target resolvability, namely the dipole-dipole array has the highest resolution. In the second test, we reconstruct random electrode combinations from the 2-pole data segregated into inner, outer, and overlapping dipoles. The resistance data and inverse models from these randomized arrays show those with inner dipoles to be superior in terms of noise and resolution and that overlapping dipoles can cause model instability and low resolution. Finally, we use the 2-pole data to create an optimized array that maximizes the model resolution matrix for a given electrode geometry. The optimized array produces the highest resolution and target detail. Thus, the tests demonstrate that high quality data and high model resolution can be achieved by acquiring field data from the pole-pole array.

58 GEOSCIENCES↗

Impact of Ducting on Heat Pump Water Heater Space Conditioning Energy Use and Comfort

Increasing penetration of heat pump water heaters (HPWHs) in the residential sector will offer an important opportunity for energy savings, with a theoretical energy savings of up to 63% per water heater and up to 11% of residential energy use (EIA 2009). However, significant barriers must be overcome before this technology will reach widespread adoption in the Pacific Northwest region and nationwide. One significant barrier noted by the Northwest Energy Efficiency Alliance (NEEA) is the possible interaction with the homes’ space conditioning system for units installed in conditioned spaces. Such complex interactions may decrease the magnitude of whole-house savings available from HPWH installed in the conditioned space in cold climates and could lead to comfort concerns (Larson et al. 2011; Kresta 2012). Modeling studies indicate that the installation location of HPWHs can significantly impact their performance and the resultant whole-house energy savings (Larson et al. 2012; Maguire et al. 2013). However, field data are not currently available to validate these results. This field evaluation of two GE GeoSpring HPWHs in the PNNL Lab Homes is designed to measure the performance and impact on the Lab Home HVAC system of a GE GeoSpring HPWH configured with exhaust ducting compared to an unducted GeoSpring HPWH during heating and cooling season periods; and measure the performance and impact on the Lab Home HVAC system of the GeoSpring HPWH with both supply and exhaust air ducting as compared to an unducted GeoSpring HPWH during heating and cooling season periods. Important metrics evaluated in these experiments include water heater energy use, HVAC energy use, whole house energy use, interior temperatures (as a proxy for thermal comfort), and cost impacts. This technical report presents results from the PNNL Lab Homes experiment.

energy efficiency↗

NASA research programs responding to workshop recommendations

The atmospheric electricity and lightning committee forecasts lightning and dissemination of information on the probability of occurrence. A data source with the F-106 flight program was established. The objective is to improve the detectability of lightning and severe storms and help develop operational avoidance procedures and to study the use of satellite and Doppler radar to detect thunderstorms and forecast the probability of lightning. Three recommendations are made: (1) to establish a national flying lightning laboratory; (2) strike models are considered and to gather strike data; (3) to find the best way to apply electrical field data to operations.

Tobiason, A. R.↗

Observations of the magnetic field and plasma flow in Jupiter's magnetosheath

A comprehensive description is given of the Jovian MS magnetic fields, and explanations of these phenomena are proposed. While emphasizing Voyager 1 and 2 magnetic field observations and their relations to the plasma observations, it is also shown that the same phenomena are present in the Pioneer 10 magnetic field data. An unusually high occurrence of nearly north or south fields is observed in the outbound MS, especially in the vicinity of the MP. It is noted that the outbound MS fields and their variations tend to occur in a plane parallel to the local MP, according to large scale MP models.

Lepping, R. P.↗

Satellite observations of Pi 2 activity at synchronous orbit

An attempt is made to characterize Pi 2 activity at synchronous orbit, on the basis of magnetic field data recorded in September, 1974. Pi 2 bursts are primarily seen in the nighttime sector, probably near 2100 LT, and are usually simultaneous with the Pi 2 bursts seen at midlatitude ground stations. Three main event types are noted at the data-gathering satellite: a 100-sec irregular oscillation in all field components, an additional 100-sec irregular oscillation which, unlike the first, is not accompanied by high frequency oscillations, and a much rarer, quasi-sinusoidal oscillation in the east-west component of the field. The dominant period of Pi 2 bursts is about 100 sec, and tends to be shorter as the level of activity measured by field changes at the satellite increases.

Sakurai, T.↗

NASA's Role in the North American Carbon Program

NASA's participation in the North American Carbon Program will include a significant effort for quantifying terrestrial and adjacent ocean sources and sinks of carbon using a variety of land, ocean, and atmospheric measurements. This effort will require improved remote sensing algorithms, new measurement technologies, refined model parameterizations of carbon cycle processes, advanced satellite data assimilation methodologies, and a data management strategy. NASA's plan for pursuing these activities will be presented. Examples of NASA data management capabilities such as the SeaWiFS on-line field data system will be discussed.

McClain, Charles R.↗

Space-based Ornithology-Studying Bird Migration and Environmental Change in North America

Natural fluctuations in the availability of critical stopover sites coupled with anthropogenic destruction of wetlands, land-use change, and anticipated losses due to climate change present migratory birds with a formidable challenge. We have developed an individual-based, spatially explicit bird migration model that simulates the migration routes, timing and energy budgets of individual birds under dynamic weather and land surface conditions. Our model incorporates biophysical constraints, individual bird energy status, bird behavior, and flight aerodynamics. We model the speed, direction, and timing of individual birds moving through a user specified Lagrangian grid. The model incorporates environmental properties including wind speed and direction, topography, dynamic hydrologic properties of the landscape, and environmental suitability. The model is driven by important variables estimated from satellite observations of the land surface, by data assimilation products from weather and climate models, and biological field data. We illustrate the use of the model to study the impact of both short- and long-term environmental variatios, e.g. climate, drought, anthropogenic, on migration timing (phenology), spatial pattern, and fitness (survival and reproductive success). We present several theoretical simulations of the spring migration of Pectoral Sandpiper (Calidris melanotos) in North America with emphasis on the Central flyway from the Gulf of Mexico to Alaska.

Smith, James↗

Interoperability of Heliophysics Virtual Observatories

If you'd like to find interrelated heliophysics (also known as space and solar physics) data for a research project that spans, for example, magnetic field data and charged particle data from multiple satellites located near a given place and at approximately the same time, how easy is this to do? There are probably hundreds of data sets scattered in archives around the world that might be relevant. Is there an optimal way to search these archives and find what you want? There are a number of virtual observatories (VOs) now in existence that maintain knowledge of the data available in subdisciplines of heliophysics. The data may be widely scattered among various data centers, but the VOs have knowledge of what is available and how to get to it. The problem is that research projects might require data from a number of subdisciplines. Is there a way to search multiple VOs at once and obtain what is needed quickly? To do this requires a common way of describing the data such that a search using a common term will find all data that relate to the common term. This common language is contained within a data model developed for all of heliophysics and known as the SPASE (Space Physics Archive Search and Extract) Data Model. NASA has funded the main part of the development of SPASE but other groups have put resources into it as well. How well is this working? We will review the use of SPASE and how well the goal of locating and retrieving data within the heliophysics community is being achieved. Can the VOs truly be made interoperable despite being developed by so many diverse groups?

Thieman, J.↗

Insights Into the Hydrology of the Congo Peatlands Through Land Surface Modeling and Data Assimilation

The 16.8 million ha of peatlands in the Cuvette Centrale wetland complex in the Congo Basin is one of the largest peatland regions on Earth but still highly understudied. Understanding the hydrological functioning of these peatlands and the effects of external disturbances thereon remains a major challenge. Recent research suggested fundamental hydrological differences between the Congo peatlands and the well-studied Southeast Asian peatlands. The Congo peatlands have a doming gradient that is up to ten times smaller, and they are influenced by river hydrology to some extent. In this study, we explore the Congo peatland hydrology through land surface modeling and data assimilation. We build upon our recently developed tropical PEATCLSM module (Apers et al., 2022) that was parameterized based on data from Southeast Asian peatlands due to the lack of field data from other tropical peatland regions. In a first step, we derive Congo-specific peat hydraulic and discharge function parameters from a scalar parametrization of water level dynamics in the Congo peatlands, using observed water level data at two locations. These Congo-specific parameters differ considerably from the original literature-based parameters from Southeast Asian peatlands. In a second step, we apply our original and Congo-specific parameters in an assimilation scheme for L-band brightness temperature (Tb) data from the Soil Moisture and Ocean Salinity (SMOS) mission. The data assimilation results are used in two ways. First, the effect of these parameters on the simulated peatland hydrology and the observation-minus-forecast Tb residuals is evaluated. It is hypothesized that the new parameters reduce the previously reported modeling errors over the Congo peatlands and reduce the residuals in Tb as well. Second, we analyze the data assimilation diagnostics to learn about other model improvement possibilities. In preliminary results, we found long periods of temporally autocorrelated total water storage increments (difference of pre- and post-update) that coincided with anomalies in river stages measured upstream of the peatlands. Since PEATLCSM neglects possible river influence, this concurrence suggests that the typically used grid-based approach of land surface models should be combined with a river routing scheme over the Congo peatlands.

Sebastian Apers↗

Using Machine Learning to Predict Future Temperature Outputs in Geothermal Systems

Optimizing the power output, and economic value, of geothermal power plants over decades of operation is a major challenge in renewable energy. Optimizing the output requires the ability to predict the mass flow rates and the output temperatures of production wells based on the inputs of injection wells, as well as the time history of the system. Machine Learning (ML) that incorporates the known physics of geothermal systems is one possible solution to this challenge. In this work, we explore the ability of ML algorithms to predict future temperature outputs based on historical data. Considering the challenges with obtaining an empirical dataset from field data that is large enough to enable reliable ML, we propose an alternate approach: developing a high-fidelity reservoir model and using computational resources to build a dataset that enables ML. As a first step towards achieving this goal, we present preliminary results from applying ML to predict the temperature timeseries of simple modeled geothermal systems. We describe the application of relevant state-of-the-art ML approaches, such as the Long Short-Term Memory (LSTM) networks and Convolutional Neural Networks (CNN), to extract temporal structures in the model data. We assess the accuracy of the forecasts we obtain, compare the selected approaches, and share the lessons learned that would inform the process of training and utilizing ML algorithms for larger and more complex geothermal systems.

GEOTHERMAL ENERGY↗

Environmental Barrier Coatings for Ceramic Matrix Composites - An Overview

Ceramic Matrix Composites (CMCs) are increasingly being considered as structural materials for advanced power generation equipment. Broadly speaking the two classes of materials are oxide-based CMCs and non-oxide based CMCs. The non-oxide CMCs are primarily silicon-based. Under conditions prevalent in the gas turbine hot section the water vapor formed in the combustion of gaseous or liquid hydrocarbons reacts with the surface-SiO2 to form volatile products. Progressive surface recession of the SiC-SiC CMC component, strength loss as a result of wall thinning and chemical changes in the component occur, which leads to the loss of structural integrity and mechanical strength and becomes life limiting to the equipment in service. The solutions pursued to improve the life of SiC-SiC CMCs include the incorporation of an external barrier coating to provide surface protection to the CMC substrate. The coating system has become known as an Environmental Barrier Coating (EBC). The relevant early coatings work was focused on coatings for corrosion protection of silicon-based monolithic ceramics operating under severely corrosive conditions. The development of EBCs for gas turbine hot section components was built on the early work for silicon-based monolithics. The first generation EBC is a three-layer coating, which in its simplest configuration consists of a silicon (Si) base coat applied on top of the CMC, a barium-strontium-aluminosilicate (BSAS) surface coat resistant to water vapor attack, and a mullite-based intermediate coating layer between the Si base coat and BSAS top coat. This system can be represented as Si-Mullite-BSAS. While this baseline EBC presented a significant improvement over the uncoated SiC-SiC CMC, for the very long durations of 3-4 years or more expected for industrial operation further improvements in coating durability are desirable. Also, for very demanding applications with higher component temperatures but shorter service lives more rugged EBCs will be necessary. A second generation of EBCs incorporates rare earth silicates which have extremely favorable resistance against environmental attack and a higher temperature capability. Performance data for this class of EBCs is more limited and especially field data are not as extensive as for the first generation EBCs. Extensive laboratory, rig and engine testing, including testing of EBC coated SiC-SiC CMCs in actual field applications is in progress. The development of next generation EBCs with even higher temperature capability than the second generation EBC is also underway. This paper will discuss the current status of EBC technology and future direction based on literature survey.

Laboratory↗

Interplanetary magnetic field power spectra - Mean field radial or perpendicular to radial

A detailed frequency analysis of Pioneer-6 interplanetary magnetic field data is carried out for 5 to 15 hour periods during which the mean interplanetary field is approximately radial or perpendicular to radial. The reason why these data sets were chosen is that by making the usual assumption that the phase speed of any wave present is much less than the mean solar wind speed, the measured frequency spectra can be interpreted in terms of the wave number parallel or perpendicular to the mean field, without such additional assumptions as isotropy or the dominance of a particular mode and without measurements of velocity and density. The details of the calculation of the magnetic field power spectra, coherencies, and correlation functions are discussed, along with results obtained directly from the data (such as spectra, slopes, anisotropies, and coherencies). The results are interpreted in terms of MHD theory, and are related to work in other areas.

Sari, J. W.↗

MultispeQ Beta: a tool for large-scale plant phenotyping connected to the open PhotosynQ network

Large-scale high-throughput plant phenotyping (sometimes called phenomics) is becoming increasingly important in plant biology and agriculture and is essential to cutting-edge plant breeding and management approaches needed to meet the food and fuel needs for the next century. Currently, the application of these approaches is severely limited by the availability of appropriate instrumentation and by the ability to communicate experimental protocols, results and analyses. To address these issues, we have developed a low-cost, yet sophisticated open-source scientific instrument designed to enable communities of researchers, plant breeders, educators, farmers and citizen scientists to collect high-quality field data on a large scale. The MultispeQ provides measurements in the field or laboratory of both, environmental conditions (light intensity and quality, temperature, humidity, CO 2 levels, time and location) and useful plant phenotypes, including photosynthetic parameters—photosystem II quantum yield (Φ II ), non-photochemical exciton quenching (NPQ), photosystem II photoinhibition, light-driven proton translocation and thylakoid proton motive force, regulation of the chloroplast ATP synthase and potentially many others—and leaf chlorophyll and other pigments. Plant phenotype data are transmitted from the MultispeQ to mobile devices, laptops or desktop computers together with key metadata that gets saved to the PhotosynQ platform (https://photosynq.org) and provides a suite of web-based tools for sharing, visualization, filtering, dissemination and analyses. We present validation experiments, comparing MultispeQ results with established platforms, and show that it can be usefully deployed in both laboratory and field settings. We present evidence that MultispeQ can be used by communities of researchers to rapidly measure, store and analyse multiple environmental and plant properties, allowing for deeper understanding of the complex interactions between plants and their environment.

47 OTHER INSTRUMENTATION↗