Search NASA⌕ Search

SEARCH · Search NASA

Results for “H- source”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Quantifying the photoionization cross section of the hydroxyl radical

The hydroxyl free radical, OH, is one of the most significant radicals in atmospheric and interstellar chemistry, and its cation plays a role in the reactions leading to H 2 O formation. Knowledge of the photoionization efficiency of the OH radical is crucial to properly model the water photochemical cycle of atmospheres and astrophysical objects. With a gas-phase radical source based on a single H-abstraction reaction combined with a photoelectron/photoion imaging coincidence spectrometer coupled with synchrotron radiation, we recorded the OH+ photoion yield over the 12.6-15 eV energy range, and we set it to an absolute cross section scale using an absolute point measurement performed at 13.8 eV: σ$^{ion}_{OH}$ = 9.0 +/- 2.7 Mb. The resulting cross section values differ by approximately a factor 2 from the recent measurement of Dodson et al. [ J. Chem. Phys. 148, 184302 (2018)] performed with a different radical source, which is somewhat greater than the combined uncertainties of the measurements. This finding underlines the need for further investigations of this cross section.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ARE OUTFLOWS BIASING SINGLE-EPOCH C IV BLACK HOLE MASS ESTIMATES?

We use a combination of reverberation mapping data and single-epoch (SE) spectra of the C IV emission line in a sample of both low- and high-redshift active galactic nuclei to investigate sources of the discrepancies between C IV- and H{beta}-based SE black hole (BH) mass estimates. We find that for all reverberation mapped sources, there is a component of the line profile that does not reverberate, and the velocity characteristics of this component vary from object to object. The differing strength and properties of this non-variable component are responsible for much of the scatter in C IV-based BH masses compared to H{beta} masses. The C IV mass bias introduced by this non-variable component is correlated with the shape of the C IV line, allowing us to make an empirical correction to the BH mass estimates. Using this correction and accounting for other sources of scatter, such as poor data quality and data inhomogeneity, reduces the scatter between the C IV and H{beta} masses in our sample by a factor of {approx}2, to only {approx}0.2 dex. We discuss the possibility that this non-variable C IV component originates in an orientation-dependent outflow from either the proposed broad-line region disk wind or the intermediate-line region, a high-velocity inner extension of the narrow-line region.

79 ASTRONOMY AND ASTROPHYSICS↗

ALTERNATIVE AND ENHANCED CHEMICAL CLEANING: BASIC STUDIES RESULTS FY2010

In an effort to develop and optimize chemical cleaning methods for the removal of sludge heels from High Level Waste tanks, solubility tests have been conducted using nonradioactive, pure metal phases. The metal phases studied included the aluminum phase gibbsite and the iron phases hematite, maghemite, goethite, lepidocrocite, magnetite, and wustite. Many of these mineral phases have been identified in radioactive, High Level Waste sludge at the Savannah River and Hanford Sites. Acids evaluated for dissolution included oxalic, nitric, and sulfuric acids and a variety of other complexing organic acids. The results of the solubility tests indicate that mixtures of oxalic acid with either nitric or sulfuric acid are the most effective cleaning solutions for the dissolution of the primary metal phases in sludge waste. Based on the results, optimized conditions for hematite dissolution in oxalic acid were selected using nitric or sulfuric acid as a supplemental proton source. Electrochemical corrosion studies were also conducted (reported separately; Wiersma, 2010) with oxalic/mineral acid mixtures to evaluate the effects of these solutions on waste tank integrity. The following specific conclusions can be drawn from the test results: (1) Oxalic acid was shown to be superior to all of the other organic acids evaluated in promoting the dissolution of the primary sludge phases. (2) All iron phases showed similar solubility trends in oxalic acid versus pH, with hematite exhibiting the lowest solubility and the slowest dissolution. (3) Greater than 90% hematite dissolution occurred in oxalic/nitric acid mixtures within one week for two hematite sources and within three weeks for a third hematite sample with a larger average particle size. This dissolution rate appears acceptable for waste tank cleaning applications. (4) Stoichiometric dissolution of iron phases in oxalic acid (based on the oxalate concentration) and the formation of the preferred 1:1 Fe to oxalate complex is possible with the addition of a supplemental hydrogen ion source (HNO{sub 3} or H{sub 2}SO{sub 4}) and pH control. (5) Sulfuric acid is nearly twice as effective as nitric acid (on a molar basis) at promoting hematite dissolution in oxalic acid solutions, most likely due to the fact that it is diprotic. (6) The greater the oxalic acid concentration, the greater the demand for supplemental H{sup +} to promote optimal dissolution. Minimum mineral acid concentrations required for optimal oxalic acid utilization based on hematite solubility tests are provided. (7) Corrosion studies conducted (reported elsewhere) with 1 wt.% oxalic acid revealed that carbon steel corrosion rates are manageable at lower mineral acid concentrations (0.1 M HNO{sub 3} and 0.05 M H{sub 2}SO{sub 4}) and lower temperatures (45 C). (8) Proposed conditions for waste tank heel dissolution based on the solubility and corrosion test results are 0.5 wt.% oxalic acid and 0.18 M HNO{sub 3} or 0.09 M H{sub 2}SO{sub 4} at 50 C. (9) The OLI Thermodynamic Model appears to over-predict the solubility of the iron phases studied in oxalic acid and oxalic/nitric acid mixtures. The predictions show better agreement with experimental results at higher pH and in sulfuric/oxalic acid mixtures. (10) Oxalic, nitric, and sulfuric acids are effective at quickly dissolving gibbsite ({ge}86% dissolution in 2 weeks), with oxalic/sulfuric acid mixtures being particularly effective. (11) Limited dissolution tests conducted with carbon steel coupons revealed that the presence of metallic iron can, in some cases, result in dramatically different results. Additional studies in this area are recommended. Based on the current results, the optimal approach for the removal of sludge heels for HLW tanks would include the following steps: (1) removal of the maximum possible amount of heel materials by mechanical means; (2) neutralization and acidification of the heel using dilute mineral acid (This step should promote significant dissolution of certain metal hydroxides and salts, including gibbsite.); and (3) dissolution of the residual heel material at 50 C using an acid mixture containing 0.5 wt.% oxalic acid and 0.18 M nitric acid (This step should dissolve the iron phases.)

36 MATERIALS SCIENCE↗

Growth of polyphenyls via ion-molecule reactions: An experimental and theoretical mechanistic study

The reactivity of biphenylium cations C{sub 12}H{sub 9}{sup +} with benzene C{sub 6}H{sub 6} is investigated in a joint experimental and theoretical approach. Experiments are performed by using a triple quadruple mass spectrometer equipped with an atmospheric pressure chemical ion source to generate C{sub 12}H{sub 9}{sup +} via dissociative ionization of various isomers of the neutral precursor hydroxybiphenyl (C{sub 12}H{sub 10}O). C-C coupling reactions leading to hydrocarbon growth are observed. The most abundant ionic products are C{sub 18}H{sub 15}{sup +}, C{sub 18}H{sub 13}{sup +}, C{sub 17}H{sub 12}{sup +}, and C{sub 8}H{sub 7}{sup +}. The dependence of product ion yields on the kinetic energy of reagent ions, as well as further experiments performed using partial isotopic labelling of reagents, support the idea that the reaction proceeds via a long lived association product, presumably the covalently bound protonated terphenyl C{sub 18}H{sub 15}{sup +}. Its formation is found to be exothermic and barrierless and, therefore, might occur under the low pressure and temperature conditions typical of planetary atmospheres and the interstellar medium. Theoretical calculations have focussed on the channel leading to C{sub 8}H{sub 7}{sup +} plus C{sub 10}H{sub 8}, identifying, as the most probable fragments, the phenylethen-1-ylium cation and naphthalene, thus suggesting that the pathway leading to them might be of particular interest for the synthesis of polycyclic aromatic hydrocarbons. Both experiments and theory agree in finding this channel exoergic but hampered by small barriers of 2.7 and 3.7 kcal mol{sup -1} on the singlet potential energy surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling of a negative ion source. II. Plasma-gas coupling in the extraction region

The production, destruction, and transport of H{sup -} in the extraction region of a negative ion source are investigated with a 1D(z)-3V particle-in-cell electrostatic code. The motion of charged particles (e, H{sup +}, H{sub 2}{sup +}, and H{sup -}) in their self-consistent electric field is coupled with the neutral particles [H(n=1) and H{sub 2}(X{sup 1}{sigma}{sub g}{sup +}, v=0,...,14)] dynamics and vibrational kinetics of H{sub 2}. Neutral influxes into the domain are determined by the simulation of the expansion region. Surface and volumetric processes involving plasma and neutrals have been included by using different Monte Carlo collision methods. Calculations show the influence of the plasma grid bias and of the magnetic filter on the plasma parameter profiles. In particular, a transition from classical to complete reverse sheath is observed using a positively biased plasma grid. The influence of the magnetic filter is small. The importance of the hot-atom mechanism on the surface negative ion production is shown.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Emission Spectroscopy of the 4X Source Discharge With and Without N 2 Gas

This tech note summarizes the December, 1988 emission spectroscopy measurements made on the 4X source discharge with and without N₂ gas added to the H + Cs discharge. This study is motivated by the desire to understand why small amounts of N₂ gas added to the source discharge results in a reduction in the H⁻ beam noise. The beneficial effect of N₂ gas on H⁻ beam noise was first discovered by Bill Ingalls and Stu Orbesen on the ATS SAS source. For the 4X source the observed effect is that when N2 gas is added to the discharge the H⁻ beam noise is reduced about a factor of 2.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Efficient cesiation in RF driven surface plasma negative ion source

Experiments on hydrogen negative ions production in the large radio-frequency negative ion source with cesium seed are described. The system of directed cesium deposition to the plasma grid periphery was used. The small cesium seed (∼0.5 G) provides an enhanced H{sup −} production during a 2 month long experimental cycle. The gradual increase of negative ion yield during the long-term source runs was observed after cesium addition to the source. The degraded H{sup −} production was recorded after air filling to the source or after the cesium washing away from the driver and plasma chamber walls. The following source conditioning by beam shots produces the gradual recovery of H{sup −} yield to the high value. The effect of H{sup −} yield recovery after cesium coverage passivation by air fill was studied. The concept of cesium coverage replenishment and of H{sup −} yield recovery due to sputtering of cesium from the deteriorated layers is discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Optical Durability of Contemporary PV Encapsulants Through Artificial UV Weathering

Modern c-Si photovoltaic (PV) cells provide high performance but can be vulnerable to ultraviolet light induced degradation (UV-ID). Encapsulants, if chosen correctly, can mitigate UV-ID of the PV cell. Here, we explore performance and durability of 14 commercial encapsulant materials before, during, and after irradiation with UV-containing light. Materials include contemporary, polymer-based encapsulants with a base polymer of poly (ethylene co-vinyl acetate) (EVA), polyethylene-..alpha..-olefin (POE), or their composite (EPE). Polymers contain additives that induce UV-blocking, UV-transmitting, or UV-downshifting properties. We use test coupons to study degradation in a chamber held at 65 degrees C under a xenon light source for up to 4000 h of exposure, corresponding to a cumulative dose of 11.5 MJ/m2 at 340 nm. We examine optical properties including spectral transmittance, yellowness index and spectral fluorescence, considering changes to both the encapsulant and glass as a function of weathering time. Degradation modes identified include discoloration, changes to UV cutoff wavelength, changes to solar-weighted transmittance, and most notably a change to the UV-managing properties of some additives. We propose the use of solar-weighted transmittance in the 300- to 400-nm range to better track performance changes in the UV region associated with the UV-related additive. This is especially relevant for the emerging class of UV-downshifting additives, as metrics like UV-cutoff can understate the degree of degradation or change in these materials. While most encapsulants show very little change after weathering, some show significant changes that directly impact how much UV light would reach an underlying cell.

14 SOLAR ENERGY↗

Effect of HCO 3 - on electrochemical kinetics of carbon steel corrosion in CO 2 -saturated brines

The effect of HCO 3 – (aq) on CO 2 corrosion of carbon steel was investigated in deaerated 3.5 wt% NaCl solutions at 30 °C from pH 3.96 to 7.15. In the CO 2 -saturated solutions, the pH was adjusted with different HCO 3 – (aq) concentrations, c[HCO 3 – (aq)]. The corrosion rate decreased by a factor of 2 as the pH and c[HCO 3 – (aq)] increased. The cathodic current density during polarization increased at higher pH with higher c[HCO 3 – (aq)], indicating that HCO 3 – (aq) acted as an additional hydrogen source for the hydrogen evolution reaction. As the pH increased, the active dissolution regions displayed similar anodic Tafel slopes and suggested a modified Bockris mechanism for the Fe oxidation reaction. The exchange current densities for the half reactions were calculated to study kinetics of the anodic and cathodic half reactions independently. The anodic exchange current density ( j 0,a ) increased by one order of magnitude in the presence of CO 2 , indicating the involvement of CO 2 (aq) in the Fe oxidation reaction. As the pH and c[HCO 3 – (aq)] increased, the cathodic exchange current density ( j 0,c ) decreased by a factor of 50 because the increase in j 0,c [HCO 3 – (aq)] was not high enough to compensate the decline from the other hydrogen sources, especially j 0,c [H + (aq)]; and j 0,a decreased by a factor of 2.4 because HCO 3 – (aq) may have competed with CO 2 (aq) for the surface coverage and the increase in j 0,a [CO 2 (aq)] could not compensate the decrease in j 0,a [CO 2 (aq)]. It suggests that the reaction rate constant of HCO 3 – (aq) was smaller than CO 2 (aq) for the anodic half reaction and was smaller than H + (aq) for the cathodic half reaction. The XPS results verified that the corrosion products transitioned from iron carbonate to hydroxide as the pH increased while iron carbonate remained the major product. As the pH increased with HCO 3 – (aq), a second time constant was observed at lower frequencies of the electrochemical impedance spectroscopy (EIS) results.

36 MATERIALS SCIENCE↗

Leaf isoprene and monoterpene emission distribution across hyperdominant tree genera in the Amazon basin

Tropical forests are acknowledged to be the largest global source of isoprene (C 5 H 8 ) and monoterpenes (C 10 H 16 ) emissions, with current synthesis studies suggesting few tropical species emit isoprenoids (20-38%) and do so with highly variable emission capacities, including within the same genera. This apparent lack of a clear phylogenetic thread has created difficulties both in linking isoprenoid function with evolution and for the development of accurate biosphere-atmosphere models. In this work, we present a systematic emission study of "hyperdominant" tree species in the Amazon Basin. Across 162 individuals, distributed among 25 botanical families and 113 species, isoprenoid emissions were widespread among both early and late successional species (isoprene: 61.9% of the species; monoterpenes: 15.0%; both isoprene and monoterpenes: 9.7%). The hyperdominant species (69) across the top five most abundant genera, which make up about 50% of all individuals in the Basin, had a similar abundance of isoprenoid emitters (isoprene: 63.8%; monoterpenes: 17.4%; both 11.6%). Among the abundant genera, only Pouteria had a low frequency of isoprene emitting species (15.8% of 19 species). In contrast, Protium, Licania, Inga, and Eschweilera were rich in isoprene emitting species (83.3% of 12 species, 61.1% of 18 species, 100% of 8 species, and 100% of 12 species, respectively). Light response curves of individuals in each of the five genera showed light-dependent, photosynthesis-linked emission rates of isoprene and monoterpenes. Importantly, in every genus, we observed species with light-dependent isoprene emissions together with monoterpenes including β-ocimene. These observations support the emerging view of the evolution of isoprene synthases from β-ocimene synthases. Our results have important implications for understanding isoprenoid function-evolution relationships and the development of more accurate Earth System Models.

59 BASIC BIOLOGICAL SCIENCES↗

A buffering heat exchanger/thermal energy storage system for desalination applications

A buffering heat exchanger/thermal energy storage (BHXTES) system was designed using a fast-response phase-change material/graphite foam (PCM/GF) medium for desalination and potentially other industrial applications. Unlike a store-now-and-use-later TES system, this study focused on developing a dynamically balanced, continuously used, system that optimized three functions. A lab-scale prototype was designed and fabricated with a PureTemp 151/GF storage medium. The experimental data showed excellent thermal performance repeatability indicating minimal effects of PCM expansion and contraction on the GF as well as negligible PCM redistribution effects. The experimental data also served as a validation of the numerical model of the BHXTES system, after which optimization of the BHXTES system was conducted through numerical simulations for both PureTemp 151/GF and solar salt/GF as the storage medium. The results show that, with a Therminol 55 heat transfer fluid, continuous operation of the system can be realized with a solar energy source through cycles of 8-h changing for desalination and energy storage with the supplied heat followed by 16-h discharging for desalination with the stored energy. As a result, the working fluid outlet temperatures are generally in the ranges of approximately 128–160 °C for a PureTemp 151/GF medium and 198–220 °C for a solar salt/GF medium.

Buffering↗

The Sec and Tat Protein Translocation Pathways in Chloroplasts

Most chloroplast proteins are encoded by nuclear genes, translated in the cytosol as precursor proteins, and posttranslationally imported into the chloroplast. A subset of imported proteins is further localized to the thylakoid membrane and lumen by mechanisms conserved from the cyanobacterial endosymbiont that evolved into the chloroplast. The Sec and Twin arginine translocation (Tat) pathways are the major systems for transporting proteins across the thylakoid membrane into the lumen. Both systems employ hydrophobic cleavable signal peptides for targeting, but Tat signal peptides also contain an essential twin arginine motif. Biochemical studies indicate that the thylakoid Sec system operates similarly to the Escherichia coli Sec system, that is a chloroplast SecA powers transport of unfolded protein substrates through a fixed cpSecYE channel. Indirect evidence also suggests that the thylakoid Sec system can integrate plastid-encoded multispanning membrane proteins cotranslationally. The Tat pathway is a newly discovered translocation system that can transport folded protein domains using the Δμ H+ as the sole energy source. Three membrane proteins, High chlorophyll fluorescence 106 (Hcf106), Thylakoid assembly 4 (Tha4), and cpTatC constitute the components of the Tat machinery. Precursor proteins bind to a large cpTatC-Hcf106 complex by contact of the signal peptide twin arginine region to cpTatC and its hydrophobic core to Hcf106. This triggers recruitment of a Tha4 oligomer, setting the stage for transport. During the translocation step, the Tha4 oligomer undergoes a conformation shift that aligns its amphipathic helices and carboxyl tails, possibly in association with the bilayer interface. Furthermore, these results have been interpreted in a general model in which the Tha4 oligomer facilitates passage of the substrate across the lipid bilayer.

59 BASIC BIOLOGICAL SCIENCES↗

Crystallization of synthetic coal-petcoke slag mixtures simulating those encountered in entrained bed slagging gasifiers

Commercial entrained bed slagging gasifiers use a carbon feedstock of coal, petcoke, or combinations of them to produce CO and H{sub 2}. These carbon sources contain mineral impurities that liquefy during gasification and flow down the gasification sidewall, interacting with the refractory linear and solidifying in the cooler zones of the gasifier. Proper slag flow is critical to good gasifier operation. A hot-stage confocal scanning laser microscope (CSLM) was used to analyze the kinetic behavior of slag crystallization for a range of synthetic coal-petcoke mixtures. On the basis of the observed precipitation during cool down studies in the 1200-1700{sup o}C temperature range, a time-temperature-transformation (TTT) diagram was created. The crystallization studies were conducted with a CO/CO{sub 2} (=1.8) corresponding to a gasification PO{sub 2} of approximately 10-8 atm at 1500{sup o}C. Ash chemistries were chosen such that they correspond to coal-petcoke feedstock mixtures with coal ash amounts of 0, 10, 30, 50, 70, and 100% (by weight), with the balance being petcoke ash. The TTT diagram exhibited two crystallization areas, one above and one below 1350{sup o}C. At the nose of the higher temperature curves, karelianite (V{sub 2}O{sub 3}) crystallization occurred and was fastest for a 30% coal-petcoke ash mixture. The second nose was located below 1350{sup o}C and had spinel-type phases that formed at 1200{sup o}C, in which preferred atomic occupation at the octahedral and tetrahedral sites varied depending upon the ash composition. At 1200{sup o}C, an Al-rich spinel formed for 100% coal slag and a Fe-rich spinel formed in petcoke-enriched slags. The addition of petcoke ash to coal ash promoted crystallization in the slag, with additional crystalline phases, such as V-rich spinel, forming at the lower temperatures. These phases were not predicted using commercially available databases. 30 refs., 18 figs.

01 COAL, LIGNITE, AND PEAT↗

Envelope equations for cylindrically symmetric space charge dominated multi species beam

We have derived differential equations for the beam envelope of a cylindrically symmetric space charge dominated multi-species beam. The major contribution here is the inclusion of the emittance growth of each species of the beam resulting from the nonlinear space charge effect of the other species which arises if the beam radius of that particular species is greater than the other species. In addition, we have also discussed the beam selection using slits and considered only the effective values of the current and emittance of each species after the slit for further transport in case the beam size of any species is larger than the slit size or the finite aperture of the beam pipe. Finally, we have studied the transport of proton from 2.45 GHz microwave ion source in the presence of H{sub 2}{sup +}, H{sub 3}{sup +} species to demonstrate the application of these results. Numerical results are presented for various values of the total beam current and different fractions of p, H{sub 2}{sup +}, and H{sub 3}{sup +} species.

43 PARTICLE ACCELERATORS↗

Novel, band-controlled metal oxide compositions for semiconductor-mediated photocatalytic splitting of water to produce H{sub 2}

Semiconductor-mediated photo-catalytic dissociation of water offers a unique opportunity for the production of H{sub 2}, a sustainable source of energy. More efficient and chemically stable photo-catalysts, however, remain a vital requirement for commercial viability of this process. The recent research in my group has focused on the synthesis of several new metal oxide (MO) photo-catalysts, such as: LaInO{sub 3}, GaFeO{sub 3}, InVO{sub 4}, In{sub 2}TiO{sub 5} and nanotubular TiO{sub 2}. These samples of controlled grain morphology have been synthesized by using different synthesis protocols and with and without coating of a noble metal co-catalyst. The doping of an impurity, either at cationic or at anionic lattice site, has helped in the tailoring of band structure and making these oxides visible-light-sensitive. Our study has revealed that the surface characteristics, grain morphology, band structure, and doping-induced lattice imperfections control the photo-physical properties and overall photo-catalytic water splitting activity of these metal/MO composites [1-6]. We have demonstrated that, besides promoting certain charge-transfer steps, metal-semiconductor interfaces influence the adsorption of water molecules and their subsequent interaction with photo-generated electron-hole pair at the catalyst surface. The role played by the above-mentioned micro-structural properties in photo-catalytic water splitting process will be discussed.

36 MATERIALS SCIENCE↗

Dissociation pathways of a single dimethyl disulfide on Cu(111): Reaction induced by simultaneous excitation of two vibrational modes

We present a novel reaction mechanism for a single adsorbed molecule that proceeds via simultaneous excitation of two different vibrational modes excited by inelastic tunneling electrons from a scanning tunneling microscope. Specifically, we analyze the dissociation of a single dimethyl disulfide (DMDS, (CH{sub 3}S){sub 2}) molecule on Cu(111) by using a versatile theoretical method, which permits us to simulate reaction rates as a function of sample bias voltage. The reaction is induced by the excitation of C-H stretch and S-S stretch modes by a two-electron process at low positive bias voltages. However, at increased voltages, the dissociation becomes a single-electron process that excites a combination mode of these stretches, where excitation of the C-H stretch is the energy source and excitation of the S-S stretch mode enhances the anharmonic coupling rate. A much smaller dissociation yield (few orders of magnitude) at negative bias voltages is understood in terms of the projected density of states of a single DMDS on Cu(111), which reflects resonant excitation through the molecular orbitals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Overlapping growth windows to build complex oxide superlattices

Perovskite oxide superlattices are of particular interest due to novel phenomena emerging at interfaces which are beyond the bulk properties of the constituent layers. However, building perovskite superlattices comprised of stoichiometric layers with sharp interfaces has proven challenging. Here, the synthesis of a series of high quality (SrTiO3) n /(CaTiO 3 ) n superlattice structures grown on LSAT substrates is demonstrated by employing hybrid molecular beam epitaxy, where Ti was supplied using metal-organic titanium tetraisopropoxide (TTIP), and Sr and Ca were supplied using conventional effusion cells. By careful adjustment of the cation fluxes of Sr and Ca with respect to the TTIP flux, the growth windows of SrTiO 3 and CaTiO 3 were overlapped, allowing us to grow the individual superlattice layers with self-regulated stoichiometry. Stable and repeatable reflection high-energy electron diffraction oscillations during the entire ~2.5 h growth period indicated good source flux stability. The structural quality of the superlattice films were determined by scanning transmission electron microscopy and synchrotron-based X-ray diffraction, revealing periodic, phase pure, homogenous superlattice structures with abrupt interfaces. Application of perovskite stoichiometric growth windows offers great potential for accessing and realizing interface driven phenomena in versatile perovskite superlattice materials with chemistries beyond titanates.

36 MATERIALS SCIENCE↗

IPHAS A-TYPE STARS WITH MID-INFRARED EXCESSES IN SPITZER SURVEYS

We have identified 17 A-type stars in the Galactic Plane that have mid-infrared (mid-IR) excesses at 8 {mu}m. From observed colors in the (r' - H{alpha}) - (r' - i') plane, we first identified 23,050 early A-type main-sequence (MS) star candidates in the Isaac Newton Photometric H-Alpha Survey (IPHAS) point source database that are located in Spitzer Galactic Legacy Mid-Plane Survey Extraordinaire Galactic plane fields. Imposing the requirement that they be detected in all seven Two Micron All Sky Survey and Infrared Astronomical Satellite bands led to a sample of 2692 candidate A-type stars with fully sampled 0.6 to 8 {mu}m spectral energy distributions (SEDs). Optical classification spectra of 18 of the IPHAS candidate A-type MS stars showed that all but one could be well fitted using MS A-type templates, with the other being an A-type supergiant. Out of the 2692 A-type candidates 17 (0.6%) were found to have 8 {mu}m excesses above the expected photospheric values. Taking into account non-A-Type contamination estimates, the 8 {mu}m excess fraction is adjusted to {approx}0.7%. The distances to these sources range from 0.7 to 2.5 kpc. Only 10 out of the 17 excess stars had been covered by Spitzer MIPSGAL survey fields, of which five had detectable excesses at 24 {mu}m. For sources with excesses detected in at least two mid-IR wavelength bands, blackbody fits to the excess SEDs yielded temperatures ranging from 270 to 650 K, and bolometric luminosity ratios L {sub IR}/L {sub *} from 2.2 x 10{sup -3} - 1.9 x 10{sup -2}, with a mean value of 7.9 x 10{sup -3} (these bolometric luminosities are lower limits as cold dust is not detectable by this survey). Both the presence of mid-IR excesses and the derived bolometric luminosity ratios are consistent with many of these systems being in the planet-building transition phase between the early protoplanetary disk phase and the later debris disk phase.

99 GENERAL AND MISCELLANEOUS↗