Search NASA⌕ Search

SEARCH · Search NASA

Results for “High loading rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Deformation T-Cup: A new multi-anvil apparatus for controlled strain-rate deformation experiments at pressures above 18 GPa

A new multi-anvil deformation apparatus, based on the widely used 6-8 split-cylinder, geometry, has been developed which is capable of deformation experiments at pressures in excess of 18 GPa at room temperature. In 6-8 (Kawai-type) devices eight cubic anvils are used to compress the sample assembly. In our new apparatus two of the eight cubes which sit along the split-cylinder axis have been replaced by hexagonal cross section anvils. Combining these anvils hexagonal-anvils with secondary differential actuators incorporated into the load frame, for the first time, enables the 6-8 multi-anvil apparatus to be used for controlled strain-rate deformation experiments to high strains. Testing of the design, both with and without synchrotron-X-rays, has demonstrated the Deformation T-Cup (DT-Cup) is capable of deforming 1–2 mm long samples to over 55% strain at high temperatures and pressures. To date the apparatus has been calibrated to, and deformed at, 18.8 GPa and deformation experiments performed in conjunction with synchrotron X-rays at confining pressures up to 10 GPa at 800 °C.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Superbubbles in the multiphase ISM and the loading of galactic winds

We use numerical simulations to analyze the evolution and properties of superbubbles (SBs), driven by multiple supernovae (SNe), that propagate into the two-phase (warm/cold), cloudy interstellar medium (ISM). We consider a range of mean background densities n{sub avg}=0.1--10 cm{sup −3} and intervals between SNe Δt{sub SN}=0.01--1 Myr, and follow each SB until the radius reaches ∼(1--2)H, where H is the characteristic ISM disk thickness. Except for embedded dense clouds, each SB is hot until a time t{sub sf,m} when the shocked warm gas at the outer front cools and forms an overdense shell. Subsequently, diffuse gas in the SB interior remains at T{sub h}∼10{sup 6}--10{sup 7} K, with an expansion velocity v{sub h}∼10{sup 2}--10{sup 3} km s{sup −1} (both highest for low Δt{sub SN}). At late times, the warm shell gas velocities are several tens to ∼100 km s{sup −1}. While shell velocities are too low to escape from a massive galaxy, they are high enough to remove substantial mass from dwarfs. Dense clouds are also accelerated, reaching a few to tens of km s{sup −1}. We measure the mass in hot gas per SN, M-hat {sub h}, and the total radial momentum of the bubble per SN, p-hat {sub b}. After t{sub sf,m}, M-hat {sub h}∼10--100 M{sub ⊙} (highest for low n{sub avg}), while p-hat {sub b}∼0.7--3×10{sup 5} M{sub ⊙} km s{sup −1} (highest for high Δt{sub SN}). If galactic winds in massive galaxies are loaded by the hot gas in SBs, we conclude that the mass-loss rates would generally be lower than star formation rates. Only if the SN cadence is much higher than usual in galactic disks, as may occur for nuclear starbursts, can SBs breakout while hot and expel up to 10 times the mass locked up in stars. The momentum injection values, p-hat {sub b}, are consistent with requirements to control star formation rates within galaxies at observed levels.

79 ASTRONOMY AND ASTROPHYSICS↗

Study of polyphenyl ether fluid /5P4E/ in operating elastohydrodynamic contacts by infrared emission spectroscopy

Infrared emission spectra of 5P4E polyphenyl ether were obtained from an operating elastohydrodynamic sliding contact at different speeds and loads by Fourier emission microspectrophotometry. The spectra were found to be polarized with respect to the direction of the conjunction line, especially at high shear rates. Film and metal surface temperatures were calculated from the spectra, and film thicknesses were determined under various operating conditions. Changes of polarized band structure above a critical shear rate, at which the slope of the film temperature versus shear curve changes abruptly and at which the film thickness assumes a minimum value, are consistent with a transition of the lubricant from a viscous liquid to a viscoelastic liquid or to an elastic solid.

Lauer, J. L.↗

X-wing potential for Navy applications

The X-wing provides a VTOL aircraft which has a low disc loading hover capability, similar to a conventional helicopter, combined with a high subsonic cruise speed capability. As a result, it hovers with low fuel flow rates which make extended hover duration missions practical. Its low hover power requirements also permit hovering and low speed flight on only one engine in a high speed twin engine aircraft design. The NASA DARPA Sikorsky RSRA X-wing program developed flightworthy X-wing hardware. All design activity and the majority of its component fabrication is completed. A design study was performed on an X-wing concept demonstrator aircraft which is based on the RSRA X-wing components, combined with two MTE engines and a new fuselage.

Linden, Arthur W.↗

Shear failure and impact resistance in graphite fiber laminates

The multispan beam (MSB) test was evaluated as a predictor of damage resistance and damage tolerance in quasi-isotropic graphite laminates. Materials studied were five commercial prepreg system using high-strain and intermediate-modulus carbon fibers, as well as an amorphous thermoplastic system. Failure loads and displacements in the MSB tests showed little rate dependence. Values of compressive strength after a standard low-velocity impact correlated fairly well with the MSB results.

Srinivasan, Krishna↗

Elastomeric load sharing device

An elastomeric load sharing device, interposed in combination between a driven gear and a central drive shaft to facilitate balanced torque distribution in split power transmission systems, includes a cylindrical elastomeric bearing and a plurality of elastomeric bearing pads. The elastomeric bearing and bearing pads comprise one or more layers, each layer including an elastomer having a metal backing strip secured thereto. The elastomeric bearing is configured to have a high radial stiffness and a low torsional stiffness and is operative to radially center the driven gear and to minimize torque transfer through the elastomeric bearing. The bearing pads are configured to have a low radial and torsional stiffness and a high axial stiffness and are operative to compressively transmit torque from the driven gear to the drive shaft. The elastomeric load sharing device has spring rates that compensate for mechanical deviations in the gear train assembly to provide balanced torque distribution between complementary load paths of split power transmission systems.

Isabelle, Charles J.↗

DVB-S2 Demonstration Testing for Enhancing Data Rates for CubeSat/SmallSat Missions

The number of National Aeronautics and Space Administration (NASA) CubeSat/SmallSat missions is expected to grow rapidly in the next decade. High data rate is in increasing demanded for science missions, especially for mother/daughter CubeSat constellations. As the number of spacecraft on a ground network grows, loading could be reduced by limiting contact time per day, which is enabled by higher data rates. There is also a need to communicate direct to earth from space from longer distances than low earth orbit (LEO) with CubeSats. These challenges motivate the need for bandwidth and power efficient modulation and coding techniques. Today, DVB-S2 is an industry communications standard for larger satellites. DVB-S2 uses power and bandwidth efficient modulation and coding techniques to deliver performance approaching theoretical limits of RF channels. NASA Near Earth Network (NEN) is conducting demonstration testing at Wallops Flight Facility (WFF) in spring 2019 for CubeSat/SmallSat missions for enhancing data rate performance in NASAs allocated S-band 5 MHz channel. The ultimate goal is to upgrade NEN with DVB-S2 for increasing science data return, and enabling of greater numbers of CubeSats.This paper describes NEN DVB-S2 demonstration testing objectives and performance measurement results. DVB-S2 data rate performance in the NEN S-band 5 MHz channel is presented. Simulation analysis for the expected maximum data rate performance with the DVB-S2 signal family including multiple modulations and codes are presented. Link margin analysis for a typical CubeSat/SmallSat with a 1W/2W power amplifier/patch antenna using DVB-S2 for NEN S-band is discussed. The demonstration testing configurations at NEN Wallops station is described. Results of the demonstration testing are compared with other evolving radios for SmallSats and CubeSats in term of data rate and performance. There are a number of evolving S-band and X-band radios that are compatible with NEN. Some are integrated with commercial CubeSat/SmallSat busses. Some are flying for the first time with NEN in early 2019. The USRP B200mini transceiver S-band radio is one such radio. Results of streamlined compatibility testing with NEN in 2018, performance with the Technology Educational Satellite (TechEdSat-8) in flight in early 2019, potential to add DVB-S2 to the radio, and plans for a CubeSat using the radio for communication from 10 million kilometers from earth are discussed. Another evolving radio is the Syrlinks X-band radio. Results of compatibility testing with NEN in 2018, performance with the Sustained Ocean Color Observations using Nanosatellites (SOCON) in flight in early 2019, and potential for a future SOCON constellation are discussed.

Wong, Yen↗

Investigation of the stability of paraffin-exfoliated graphite nanoplatelet composites for latent heat thermal storage systems

Organic materials, such as paraffin wax, are sought as stable and environmentally friendly phase change materials (PCM) for thermal energy storage, but they suffer from low thermal conductivity which limits the rate at which thermal energy flows into and out of the material. A common method to improve the PCM thermal behavior is through loading with high thermal conductivity particulate fillers. However, the stability of these composites in the molten state is a concern as settling of the fillers will change the effective thermal conductivity. In this work, we investigate the stability of wax loaded with exfoliated graphite nanoplatelets either of 1 m (xGnP-1) or 15 m (xGnP-15) diameter. The effect of dispersants, oxidation of the wax, viscosity of the wax, mixing time, and hydrocarbon chain length on stability is reported. It was found that the addition of octadecylphosphonic acid (ODPA) is an effective dispersant for xGnP in paraffin and microcrystalline wax. In addition, mixing time, viscosity, and oxidation of the wax influence stability in the molten state. Overall, it was found that a mixing time of 24 hours for xGnP-15 along with ODPA mixed in a high viscosity, oxidized microcrystalline wax results in composite PCM systems with the greatest stability determined at 80 C in the molten state.

Abdelaziz, Omar↗

3D–Integrated, Multi–Functional Carbon Fibers for Stable, High–Areal–Capacity Batteries

Increasing lithium-ion batteries' (LIBs) electrode areal capacity can boost energy density and lower manufacturing costs, but faces challenges in manufacturing, rate performance, and cycling stability. A conductive framework made of commercial micro-sized carbon fibers (Cfs) is presented that serves as a host for both the LiNi 0.5 Mn 0.3 Co 0.2 O 2 (NMC 532) cathode and Cfs anode. The Cf framework has multiple functions that offer high electronic conductivity (270 mS cm –1 ), low tortuosity (1.7), low Li + diffusion resistance (22 Ω), and high thermal conductivity (200 W mK –1 ). Additionally, the Cf-integrated electrodes can have an extremely high mass loading of NMC 532 (70 mg cm –2 ) with a theoretical capacity of 14 mAh cm –2 . Thus, the practical full cells assembled with the Cfs-enabled electrodes exhibit an initial areal capacity of 4.1 mAh cm –2 and capacity retention of 90.4% at 500 cycles at a cycling rate of C/3, 1.5 mA cm –2 . Data collected from the operando isothermal microcalorimetry suggest that full cells utilizing the Cf anode experience less heat release from side reactions compared to cells utilizing a conventional graphite anode. Finally, this present approach is scalable and cost-effective and can fabricate practical LIBs that boast high areal capacity, rate performance, and a lengthy cycling lifetime.

25 ENERGY STORAGE↗

Effect of isotropic and anisotropic porous microstructure on electrochemical performance of Li ion battery cathodes: An experimental and computational study

Liquid electrolyte mass transport is a major limitation affecting high-power Li ion batteries. Fast discharging causes Li salt depletion in the current collector region of the cathode which produces overpotential in the electrolyte and consequently a drop of cell voltage to below the cut-off voltage, especially at higher electrode thickness and discharge rate. In this study, through experiment and simulation, we have investigated the effect of electrode thickness, mass loading, discharge rate and tortuosity on electrolyte mass transport and final derived areal capacity and specific energy for electrodes having isotropic (normal tape casting) and anisotropic (freeze tape casting) porous microstructure. Furthermore, the macroporous channels in freeze tape cast electrodes facilitate Li salt transport and reduce the Li salt mass transport limitations even at high electrode thickness and discharge rates, and high electrode tortuosity. In our results, computer simulations show that freeze tape cast electrodes may be fully discharged up to 750 μm thickness at 1 C rate compared to 300 μm for normal tape cast electrodes with the same mass loading. Freeze tape cast electrodes also show stable maximum areal capacity for C rates about double the maximum C rates of their normal tape cast electrode counterparts with the same mass loading.

25 ENERGY STORAGE↗

The mechanism of the emergence of distinct overstretched DNA states

Although multiple overstretched DNA states were identified in experiments, the mechanism of the emergence of distinct states is still unclear. Molecular dynamics simulation is an ideal tool to clarify the mechanism, but the force loading rates in stretching achieved by conventional all-atom DNA models are much faster, which essentially affect overstretching states. We employed a modified coarse-grained DNA model with an unprecedented low loading rate in simulations to study the overstretching transitions of end-opened double-stranded DNA. We observed two-strand peeling off for DNA with low stability and the S-DNA with high stability under tension. By introducing a melting-forbidden model which prevents base-pair breaking, we still observed the overstretching transition induced by the formation of S-DNA due to the change of dihedral angle. Hence, we confirmed that the competition between the two strain-softening manners, i.e., base-pair breaking and dihedral angle variation, results in the emergence of distinct overstretched DNA states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transient thermal stress wave and vibrational analyses of a thin diamond crystal for X-ray free-electron lasers under high-repetition-rate operation

High-brightness X-ray free-electron lasers (FELs) are perceived as fourth-generation light sources providing unprecedented capabilities for frontier scientific researches in many fields. Thin crystals are important to generate coherent seeds in the self-seeding configuration, provide precise spectral measurements, and split X-ray FEL pulses, etc . In all of these applications a high-intensity X-ray FEL pulse impinges on the thin crystal and deposits a certain amount of heat load, potentially impairing the performance. In the present paper, transient thermal stress wave and vibrational analyses as well as transient thermal analysis are carried out to address the thermomechanical issues for thin diamond crystals, especially under high-repetition-rate operation of an X-ray FEL. The material properties at elevated temperatures are considered. It is shown that, for a typical FEL pulse depositing tens of microjoules energy over a spot of tens of micrometers in radius, the stress wave emission is completed on the tens of nanoseconds scale. The amount of kinetic energy converted from a FEL pulse can reach up to ~10 nJ depending on the layer thickness. Natural frequencies of a diamond plate are also computed. The potential vibrational amplitude is estimated as a function of frequency. Here, due to the decreasing heat conductivity with increasing temperature, a runaway temperature rise is predicted for high repetition rates where the temperature rises abruptly after ratcheting up to a point of trivial heat damping rate relative to heat deposition rate.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Tribological Behavior of a Cr{sub 2}O{sub 3} Ceramic Coating/Steel Couple Under Dry Sliding and Heavy Loading Conditions

This work evaluates the effects of heavy loadings on a Cr{sub 2}O{sub 3} ceramic coating/steel couple under dry sliding and in conditions similar to those occurring in heavy-duty diesel engines. Two types of wear tests were performed by a standard pin-on-disc tribometer under high constant and variable loads. Before wear tests, microstructure and mechanical properties of coating and steel were determined by optical emission spectrometry, optical microscopy, roughness, microhardness and x-ray diffractometry (XRD). The friction coefficient was directly calculated by the tribometer. The wear rate of Cr{sub 2}O{sub 3} ceramic coating was evaluated by the wear volume and that of pins by weighing them before and after tests. The wear tracks on pins and coating surfaces were analyzed by XRD and by scanning electron microscopy with energy-dispersive spectroscopy. For all loads except the lowest constant one, the results indicated high friction and wear involving material removal from the coating surface, through a severe-oxidational wear associated with extensive cracking of the surface of the coating, softening of the carburizing steel and removal of the carburized layer of pins. The wear mechanism was mild-oxidational under the lowest constant load, which was therefore suggested as the limit for acceptable performance of the sliding couple under study.

36 MATERIALS SCIENCE↗

Frequency Resilience Enhancement for Power Systems with High Penetration of Grid-Forming Inverters

Abstract—Grid following inverter-based renewable generation has replaced conventional generation in recent years, resulting in lower system inertia. The frequency resilience in such a lower inertia system is critical for emergency mitigation. In this paper, we propose a resilience metric based on frequency recovery to quantitatively represent system resilience in terms of the rate of change of frequency. Application of grid-forming converters provides a means to improve system resilience by providing virtual inertia. An under-frequency load shedding strategy is applied to further support frequency recovery in cases with high penetration of grid-forming inverters. Case studies are designed and performed in a modified IEEE 9-bus test system using the PSCAD/EMTDC platform. Simulation results demonstrate the validity of the proposed resilience metric and the effectiveness of the strategy for reducing frequency excursion in inverter-based power systems. citation: J. Gui, H. Lei, T. R. McJunkin and B. K. Johnson, "Frequency Resilience Enhancement for Power Systems with High Penetration of Grid-Forming Inverters," 2023 IEEE Power & Energy Society Innovative Smart Grid Technologies Conference (ISGT), Washington, DC, USA, 2023, pp. 1-5, doi: 10.1109/ISGT51731.2023.10066357.

14 SOLAR ENERGY↗

Investigation of the Structure and Active Sites of TiO2 Nanorod Supported VOx Catalysts by High-Field and Fast-Spinning 51V MAS NMR

Supported VOx/TiO2-Rod catalysts were studied by 51V MAS NMR at high field using a sample spinning rate of 55 kHz. The superior spectral resolution allows for the observation of at least five vanadate species. The assignment of these vanadate species was carried out by quantum mechanical calculations of 51V NMR chemical shifts of model V-surface structures. Methanol oxidative dehydrogenation (ODH) was used to establish the correlation between the reaction rate and the various surface V-sites. It is found that monomeric V-species dominated the catalyst at low vanadium loadings with two peaks observed at about -502 and -529 ppm. V-dimers with two bridged oxygen appeare at about -555 ppm. Vanadate dimers and polyvanadates connected by one bridged oxygen atom between two adjacent V atoms resonate at about -630 ppm. A positive correlation is found between the V-dimers related to the -555 ppm peak and the ODH rate while a better correlation is obtained by including monomeric contributions. This result indicates that surface V-dimers related to the -555 ppm peak are the major active sites for ODH reaction despite mono-V species are more catalytic active but their relative ratios are decreased dramatically at high V-loadings. Furthermore, a portion of the V-species is found invisible. In particular, the level of such invisibility increases with decreased level of V-loading, suggesting the existence of paramagnetic V-species at the surface.

Environmental Molecular Sciences Laboratory↗

The role of oxidation in the fretting wear process

Fretting experiments were conducted on titanium, a series of Ni-Cr-Al alloys and on some high temperature turbine alloys at room temperature and at elevated temperatures in air and in various inert environments. It was found that, depending on temperature and environment, the fretting behavior of the materials examined could be classified according to four general types of behavior. Briefly, these types of behavior were: (1) the complete absence of oxidation, as in inert environments, generally leading to low rates of fretting wear but high fretting friction; (2) gradual attrition of surface oxide with each fretting stroke, found in these experiments to operate in concert with other dominating mechanisms; (3) rapid oxidation at surface fatigue damage sites, resulting in undermining and rapid disintegration of the load bearing surface; and (4) the formation of coherent, protective oxide film, resulting in low rates of fretting wear. An analytical model predicting conditions favorable to the fourth type of behavior was outlined.

Bill, R. C.↗

Tungsten dust impact on ITER-like plasma edge

The impact of tungsten dust originating from divertor plates on the performance of edge plasma in ITER-like discharge is evaluated using computer modeling with the coupled dust-plasma transport code DUSTT-UEDGE. Different dust injection parameters, including dust size and mass injection rates, are surveyed. It is found that tungsten dust injection with rates as low as a few mg/s can lead to dangerously high tungsten impurity concentrations in the plasma core. Dust injections with rates of a few tens of mg/s are shown to have a significant effect on edge plasma parameters and dynamics in ITER scale tokamaks. The large impact of certain phenomena, such as dust shielding by an ablation cloud and the thermal force on tungsten ions, on dust/impurity transport in edge plasma and consequently on core tungsten contamination level is demonstrated. It is also found that high-Z impurities provided by dust can induce macroscopic self-sustained plasma oscillations in plasma edge leading to large temporal variations of edge plasma parameters and heat load to divertor target plates.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗