Search NASA⌕ Search

SEARCH · Search NASA

Results for “INSOLATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Dust Abrasion Damage on Martian Solar Arrays: Experimental Investigation and Opportunity Rover Performance Analysis

Here we investigate the effects of erosion and weathering that occur on III-V cover-glass interconnected cells (CICs) after exposure to Mars dust storm conditions. The durability of these materials in a Martian environment is not well characterized so we perform analogous experimentation. To replicate the dust impingement, test coupons were placed in an enclosure and sandblasted with Mars dust simulant. We show the J-V response dependency on both incident angle and exposure times. We find that the simulated Martian dust storm often results in damage to the anti-reflective coating and subsequent reduced short circuit current. Reduction in the open circuit voltage is observed, likely caused by structural damage to the crystal lattice after CIC fracture. We employ data-driven modeling to determine a performance degradation rate that is consistent with zero within uncertainty. We also quantify the soiling contribution and power degradation of the photovoltaic cells on Mars through analysis of 4.95 Martian years of report-out power conditions from the Opportunity rover. We find that atmospheric dust suspended due to a weather event does not result in instantaneous settled dust on the PV cells. We calculate via autocorrelation function that the dust settling rate is approximately 21 Sols from atmospheric dust suspension. The findings presented here deliver a realistic approximation for the insolation values and subsequent PV power expected over time on the Martian surface thus informing future dust abatement systems.

McMillon-Brown, Lyndsey↗

Dust Abrasion Damage on Martian Solar Arrays: Experimental Investigation and Opportunity Rover Performance Analysis

Here we investigate the effects of erosion and weathering that occur on III-V cover-glass interconnected cells (CICs) after exposure to Mars dust storm conditions. The durability of these materials in a Martian environment is not well characterized so we perform analogous experimentation. To replicate the dust impingement, test coupons were placed in an enclosure and sandblasted with Mars dust simulant. We show the J-V response dependency on both incident angle and exposure times. We find that the simulated Martian dust storm often results in damage to the anti-reflective coating and subsequent reduced short circuit current. Reduction in the open circuit voltage is observed, likely caused by structural damage to the crystal lattice after CIC fracture. We employ data-driven modeling to determine a performance degradation rate that is consistent with zero within uncertainty. We also quantify the soiling contribution and power degradation of the photovoltaic cells on Mars through analysis of 4.95 Martian years of report-out power conditions from the Opportunity rover. We find that atmospheric dust suspended due to a weather event does not result in instantaneous settled dust on the PV cells. We calculate via autocorrelation function that the dust settling rate is approximately 21 Sols from atmospheric dust suspension. The findings presented here deliver a realistic approximation for the insolation values and subsequent PV power expected over time on the Martian surface thus informing future dust abatement systems.

McMillon-Brown, Lyndsey↗

Seasonal, Solar Zenith Angle, and Solar Flux Variations of O+ in the Topside Ionosphere of Mars

Using observations from Mars Atmosphere and Volatile EvolutioN's Neutral Gas and Ion Mass Spectrometer, we characterize the seasonal, solar zenith angle (SZA), and solar flux dependent variations of the O+ peak and the O+/O+2 ratio in the topside ionosphere of Mars.We find that the O+ peak is between 220 and 300 km and forms at a roughly constant neutral atmospheric pressure level of 10(−8.7±0.4) Pa. The O+ peak altitude also decreases with increasing SZA near the terminator and varies sinusoidally with an amplitude of 26 km over a period of one Mars year in response to the changing solar insolation. The O+ peak altitude reaches a maximum near Northern Winter solstice and Mars perihelion. The O+ peak density on the dayside has an average value of (1.1 ± 0.5) × 103 cm−3, has no dependence on SZA for SZAs up to ∼90◦, and is mainly controlled by the thermospheric O/CO2 ratio as predicted by photochemical theory. Above the O+ peak, the O+/O+2 ratio in the dayside ionosphere approaches a constant value of 1.1 ± 0.6, decreases with increasing SZA, and is highly variable on timescales of days or less.We discuss why the O+ peak is different than the main (M2) peak at Mars and why it is similar to the F2 peak at Earth.

Girazian, Z.↗

Efficacy of Climate Forcings in PDRMIP Models

Quantifying the efficacy of different climate forcings is important for understanding the real‐world climate sensitivity. This study presents a systematic multimodel analysis of different climate driver efficacies using simulations from the Precipitation Driver and Response Model Intercomparison Project (PDRMIP). Efficacies calculated from instantaneous radiative forcing deviate considerably from unity across forcing agents and models. Effective radiative forcing (ERF) is a better predictor of global mean near‐surface air temperature (GSAT) change. Efficacies are closest to one when ERF is computed using fixed sea surface temperature experiments and adjusted for land surface temperature changes using radiative kernels. Multimodel mean efficacies based on ERF are close to one for global perturbations of methane, sulfate, black carbon, and insolation, but there is notable intermodel spread. We do not find robust evidence that the geographic location of sulfate aerosol affects its efficacy. GSAT is found to respond more slowly to aerosol forcing than CO2 in the early stages of simulations. Despite these differences, we find that there is no evidence for an efficacy effect on historical GSAT trend estimates based on simulations with an impulse response model, nor on the resulting estimates of climate sensitivity derived from the historical period. However, the considerable intermodel spread in the computed efficacies means that we cannot rule out an efficacy‐induced bias of ±0.4 K in equilibrium climate sensitivity to CO2 doubling when estimated using the historical GSAT trend.

T B Richardson↗

International Space Station Lithium-Ion Battery Status

When originally launched, the International Space Station (ISS) primary Electric Power System (EPS) used Nickel-Hydrogen (Ni-H2) batteries to store electrical energy. The electricity for the space station is generated by its solar arrays, which charge batteries during insolation for subsequent discharge during eclipse. The Ni-H2 batteries were designed to operate for ten years at a 35% depth of discharge (DOD) maximum during normal operation in a Low Earth Orbit. For service beyond that period, upgraded Li-Ion Orbital Replacement Units (ORUs) were designed. These are the largest Li-Ion batteries ever utilized for a human rated spacecraft. The first set of six Ni-H2 batteries was replaced by Li-Ion batteries in December 2016; the second set of six was launched in September 2018 and installed in March 2019. The third set of six were launched in September 2019. Three batteries were installed in September 2019, with the remaining three to be installed in January 2020. This paper will include a brief overview of the ISS Li-Ion battery system architecture, start up of the second and third set of 6 batteries and the on-orbit status of all 18 batteries, plus the status of the Li-Ion cell life testing.

Lithium-Ion↗

Possible Climate Histories of Venus Type Worlds

There are two well-known scenarios for Venus’ climate evolution. In one Venus had a long-lived magma ocean phase in its first 100Myr with a steam and CO2 dominated atmosphere. The faint young sun with its high XUV flux would cause photodissociation of the steam atmosphere and hydrodynamic escape would cause most of the hydrogen to escape & left-over oxygen would be absorbed by the magma ocean. Hence Venus would have started out hot and dry and the high D/H ratio measured by Pioneer Venus would be from this period of water loss. The other scenario is that Venus’ magma ocean lifetime would have been roughly the same length of time as Earth’s (~1Myr) and water would have condensed on its surface in its early history and had a short period of habitability before increasing solar insolation through time drove it into a runaway greenhouse. However, results from 2016 showed that if Venus remains in the slowly rotating climate dynamics regime (as seen in exoplanet related climate studies) its cloud albedo feedback would have kept it temperate for possibly billions of years. The only way to confirm which one of these scenarios occurred for Venus is to visit it and make the necessary measurements of noble and volatile gases. But exoplanet observations of young exo-Venus type worlds around young F,G,K dwarf stars may constrain which scenario is more probable for a population of such planets. We present a vision of Venus’ climate history that places it and its exoVenus cousins in an ‘Optimistic Venus Zone’ for ~3 billion years within the conventionally named ‘Venus Zone’ and hence encourage the exoplanet communit as possible habitable environments.

Way, M. J.↗

Editorial: North Pacific Environment and Paleoclimate from the Late Pleistocene to Present

The vast area of the North Pacific, spanning ~55° longitude, represents a challenge for documenting and understanding the geologic history of ocean, atmosphere, and terrestrial environmental change. This special issue highlights site-specific analyses to address various questions and provides clues that arise in response to continued North Pacific warming today in a rapidly changing climate (Figure 1). The emergence of new methods and novel application of existing methods serve to enhance our fundamental understanding of natural modes of climate variability driven by ocean and atmospheric circulation patterns, including the role of external (e.g., insolation) vs. internal forcing [e.g., El Niño Southern Oscillation (ENSO) and the Pacific Decadal Oscillation (PDO)]. Included in this volume are geographically diverse studies that present new and traditional methods for the interpretation of climate records drawn from pollen, macrofossils, tree rings, diatoms, grain size, and glacial studies. Many provide new geographic comparisons, such as Kamchatka and Hawaii, or emerge from novel geologic archives and environments, such as the marine shelf, a thermokarst lake, and a fossil forest.

Jones, Miriam C.↗

Seasonal Variations of Arctic Low-Level Clouds and its Linkage to Sea Ice Seasonal Variations

Using CALIPSO-CloudSat-Clouds and the Earth's Radiant Energy System (CERES)-Moderate Resolution Imaging Spectrometer (MODIS) (C3M) dataset, this study documents the seasonal variation of sea ice, cloud, and related atmospheric properties in the Arctic region (70°N–82°N) during the period 2007-2010. The surface type stratification used reveals the surface type influence on the Arctic cloud liquid water path (LWP)seasonality. Four surface types are defined: i) Permanent Ocean, ii) Land, iii) Permanent Ice, and iv) Transient Sea Ice. The Transient Ice regions are further divided into sub-regions according to the onset dates of melt/freeze season. Results show that the sea ice cover has no significant direct influence on the seasonal variation of the water vapor in the lower troposphere and the low-level cloud LWP. Rather, the role played by sea ice appear indirect by modifying the surface temperature response to increased solar insolation and influencing lower tropospheric stability (LTS). The results suggest that the combined increase in atmospheric water vapor due to warming air temperatures and the weakening of the inversion strength that governs the seasonal structure of cloud LWP. Over Transient Ice regions, the results suggest that the May peak in LWP coincides with a decrease in LTS and that is insensitive to melt and freeze onset. Variations in melt and freeze onset set are found to influence probably distribution of cloud LWP where regions of earlier melt and later freeze onset how a higher likelihood of larger values.

Yueyue Yu↗

TPSAS-NF1676L-31966-DND

Solar eclipses provide the scientific community with a natural experiment of the processes within the Earth system. Through the rapid reduction and recovery of surface insolation, the short-term interrelationships between surface fluxes, clouds, temperature, and other meteorological components. Past observations of the eclipse-induced temperature perturbation show a wide range of values dependent on multiple factors. One of the primary factors is prevailing cloud cover, which is challenging to quantify. The large public interest in the 21 August 2017 eclipse provided an opportunity for a study of the eclipse using citizen science. Inspired by past citizen science efforts, the GLOBE Observer (GO) program organized a citizen science campaign for the 2017 eclipse. The large number of observers combined with their ability to travel to meteorologically important areas provided nearly unbroken coverage of the path of totality, and provides a useful complementary view of the eclipse with the automated networks. Primary questions: 1) What is the quantitative relationship between prevailing cloud cover and eclipse-induced temperature perturbation according to citizen scientist observations? 2) How well do the results from the citizen scientist observations compare with those from conventional ground observing stations?

J. Brant Dodson↗

TPSAS-NF1676L-17931-DND

Many geophysical variables including temperature, clouds, and precipitation exhibit robust diurnal cycles in response to the daily cycle of solar insolation. Due to the fundamental nature of this variability, it is critical that weather and climate models accurately represent the diurnal cycle. Numerical model, however, have difficulty reproducing this observed diurnal cycle behavior, which leads to systematic errors in model representation of earth energy budget terms: including TOA and surface radiation, precipitation, and surface latent and sensible heat fluxes. This study evaluates the regional diurnal cycle in the Tropics within reanalysis models (ERA-Interim and MERRA) and quantifies systematic errors in the simulated TOA flux and precipitation due to biases in the diurnal cycle representation. The focus of this study is to quantify the importance of diurnal cycle simulation to systematic bias in reanalysis data set climatologies.

Patrick C Taylor↗

TPSAS-NF1676L-19238-DND

The 24-hour cycle of solar insolation drives diurnal cycles in Earth system processes critical to climate: radiation, convection, turbulence, and cloud processes. Cloud properties, temperature, radiative fluxes, and precipitation exhibit robust diurnal cycles as a result. The presence of these robust diurnal cycles fundamentally changes the time mean and variability of the TOA energy budget. Therefore, there is a need to understand the diurnal cycle contributions to the TOA energy budget in both observations and climate models. The first objective of this study is to quantify the diurnal cycle impact on the time mean and variability of the TOA energy budget in observations defined as the difference between TOA fluxes computed with diurnally uniform and diurnally varying cloud properties. The required observational input is observed from the combined Terra+Aqua Cloud and Earth's Radiant Energy System (CERES) data products ranging from June 2002 through October 2012. The second objective of this study is to evaluate the impact of known errors in the model diurnal cycle simulation on the time mean and variability of the TOA energy budget. The results indicate that (1) the diurnal cycle impacts on the regional time mean Tropical longwave and shortwave fluxes range from 1-3 W m 2 and 5 25 W m 2, respectively; (2) the diurnal cycle contributions to TOA flux variability exceeds 50% in land convective regions (e.g., central South America and central Africa);(3) the diurnal cycle contributions to the TOA shortwave and longwave flux time mean and variability in the CanAM4 GCM are too small in land convective regions due to errors in the diurnal distribution of convective clouds grid box errors exceed 100%.

Patrick C Taylor↗

Creating a Wastewater Technology ‘Toolbox’ for Space Exploration ECLSS

Life Support Systems (LSS) are essential for manned spaceflight; without them, humans would not survive. Upcoming long-duration missions demand robust environmental control LSS (ECLSS) due to their insolation and limited prospect for immediate resupply. As part of LSS, water purification systems will require high reliability, sustainability, and efficiency due to transport mass limitations, because routine water delivery will be very difficult and costly to resupply future habitats. This suggests a highly effective treatment method and reuse of every wastewater source. A variety of wastewater streams are generated by crew, and although not all are currently treated, habitat success will require each stream to be treated and utilized as a ‘resource’ rather than 'waste’. These wastewater streams include human wastewater (urine, feces), food waste (plate waste, inedible plant biomass), humidity condensate, hygiene water (shower, oral, handwash), and laundry. Proven technologies are often relied upon due to long-term operations. For future, longer-term missions, this paradigm must shift to include technologies based on meeting mission requirements rather than sacrificing productivity in lieu of proven existing technology capabilities. Many physical, chemical, and biological water-processing technologies are proven and established for terrestrial applications. Herein, these technologies were collected into a ‘toolbox’ to perform possible functions towards effective water purification steps in reduced gravity. Selection criteria are dependent on approach (physical, chemical, or biological), complexity/components, terrestrial performance, and potential applicability to space life support. Utilization of this ‘toolbox’ approach provides a streamline methodology for technology development and down-selection into future architecture in direct response to the dynamic space life support requirements. Establishing the ‘toolbox’ also provides organized and efficient identification of the most appropriate technologies. From there, the technologies with the largest potential to be configured for mission requirements can be further developed and appropriately assessed. This presentation seeks to provide a comprehensive review of space life support water purification requirements and challenges, as well as to present a ‘toolbox’ methodology of available technologies to aid in the difficult process of selecting appropriate LSS water purification for short and long-term NASA mission architectures.

Luke Roberson↗

Secondary Volcanically-Induced Lunar Atmosphere and Lunar Volatiles: 3-D Modeling and Analysis

The fact that the Moon could have a transient secondary atmosphere due to volcanic outgassing has been known for some time, though typically such an atmosphere was believed to be extremely thin (~10-8 bar) [1]. But recent research by Needham and Kring (NK) [2] suggests that during the peak of volcanic activity ~3.5 Ga such a volcanically-outgassed atmosphere could reach ~10-2 bar of surface pressure. In similar research Wilson et al. [3] proposed a more conservative estimate, arguing that the thickness of such an atmosphere would depend on the intervals between major eruptions and may not exceed microbar densities. In either case a collisional atmosphere could be present, which would control transport of outgassed volatiles (such as H2O) and their deposition in polar regions, where they could be preserved until modern day frozen in permanently shadowed regions (PSR) or buried beneath the regolith. Here we study such a hypothetical atmosphere to investigate its stability, meteorological properties and the effect on transport of volatiles. We use the ROCKE-3D planetary 3-D General Circulation Model (GCM)[4]. The insolation and orbital parameters were set to conditions 3.5 Ga. The atmospheric composition, based on the list of outgassed species presented by NK in combination with our estimates for atmospheric escape, condensation and the results from our 1-D chemistry model, was chosen to be either CO-dominated or CO2-dominated (depending on atmospheric temperature). In this study we restricted ourselves to relatively "thick" lunar atmospheres of 1-10 mb, though we believe that our results will scale to thinner atmospheres as well. We present the results for ground and atmospheric temperature for modeled atmospheres over a wide parameter space. In particular we consider different atmospheric compositions (CO or CO2 dominated), a set of atmospheric pressures from 1 mb to 10 mb and a set of obliquities from 0o to 40o. We also present an experiment of a single major eruption [5] and show that in just 3 years ~80% of the outgassed water is deposited in polar regions. This demonstrates the efficiency of such an atmosphere in delivering volatiles. We argue that a secondary lunar atmosphere could play a significant role in forming volatile deposits currently observed in the polar regions of the Moon.

Lunar atmospheres↗

Mapping the Zonal Structure of Titan’s Northern Polar Vortex

Saturn exhibits an obliquity of 26.7° such that the largest moon, Titan, experiences seasonal variations including the formation of a polar vortex in the winter hemisphere. Titan’s polar vortex is characterised by cold stratospheric temperatures due to the lack of insolation over the winter pole, and an increase in trace gas abundance as a result of complex organic chemistry in the upper atmosphere combined with polar subsidence. Meridional variations in temperature and gas abundance across the vortex have previously been investigated, but there has not yet been any in-depth study of the zonal variations in the temperature or composition of the northern vortex. Here we present the first comprehensive two-dimensional seasonal mapping of Titan’s northern winter vortex. Using 18 nadir mapping sequences observed by the Composite InfraRed Spectrometer (CIRS) instrument on-board Cassini, we investigate the evolution of the vortex over almost half a Titan year, from late winter through to mid summer (L(sub s) = 326 - 86°, 2007-2017). We find the stratospheric symmetry axis to be tilted from the solid body rotation axis by around 3.5°, although our results for the azimuthal orientation of the tilt are inconclusive. We find that the northern vortex appears to remain zonally uniform in both temperature and composition at all times. A comparison with vortices observed on Earth, Mars, and Venus shows that large-scale wave mechanisms that are important on other terrestrial planets are not as significant in Titan’s atmosphere. This allows the northern vortex to be more symmetrical and persist longer throughout the annual cycle compared to other terrestrial planets.

Jason Sharkey↗

Speculations on orbital forcing of sublimination from the polar caps

Calculation of the periodic variations in the martian orbital parameters by Ward and subsequent refinements to the theory, have inspired numerous models of variation of the martian water cycle. The limitations of models such as this can not be overstated. Albedo, for example, has a much greater influence on temperature than orbital forcing, and seems to be linked to insolation, possible via its influence on dust transport. To make further progress, either new constraints must be identified, or additional clues must be obtained from remote sensing and in situ exploration

Hecht, Michael H.↗

Overview of Primitive Volatile Explorer (PrOVE) Cubesat or Smallsat Concept

Here we describe the Primitive Object Volatile Explorer (PrOVE), a smallsat mission concept to study the surface structure and volatile inventory of comets in their perihelion passage phase when volatile activity is near peak. CubeSat infrastructure imposes limits on propulsion systems, which are compounded by sensitivity to the spacecraft disposal state from the launch platform and potential launch delays. We propose circumventing launch platform complications by using waypoints in space to park a deep space SmallSat or CubeSat while awaiting the opportunity to enter a trajectory to flyby a suitable target. In our Planetary Science Deep Space SmallSat Studies (PSDS3) project, we investigated scientific goals, waypoint options, potential concept of operations (ConOps) for periodic and new comets, spacecraft bus infrastructure requirements, launch platforms, and mission operations and phases. Our payload would include two low-risk instruments: a visible image (VisCAM) for 5-10 m resolution surface maps; and a highly versatile multispectral Comet CAMera (ComCAM) will measure 1) H2O, CO2, CO, and organics non-thermal fluorescence signatures in the 2-5 µm MWIR, and 2) 7-10 and 8-14 µm thermal (LWIR) emission. This payload would return unique data not obtainable from ground-based telescopes and complement data from Earth-orbiting observatories. Thus, the PrOVE mission would (1) acquire visible surface maps, (2) investigate chemical heterogeneity of a comet nucleus by quantifying volatile species abundance and changes with solar insolation, (3) map the spatial distribution of volatiles and determine any variations, and (4) determine the frequency and distribution of outbursts.

Zucherman, Aaron↗

A multi-model CMIP6-PMIP4 study of Arctic sea ice at 127 ka: sea ice data compilation and model differences

The Last Interglacial period (LIG) is a period with increased summer insolation at high northern latitudes, which results in strong changes in the terrestrial and marine cryosphere. Understanding the mechanisms for this response via climate modelling and comparing the models' representation of climate reconstructions is one of the objectives set up by the Paleoclimate Modelling Intercomparison Project for its contribution to the sixth phase of the Coupled Model Intercomparison Project. Here we analyse the results from 16 climate models in terms of Arctic sea ice. The multi-model mean reduction in minimum sea ice area from the pre industrial period (PI) to the LIG reaches 50 % (multi-model mean LIG area is 3.20×10^6 sq.km, compared to 6.46×10^6 sq.km for the PI). On the other hand, there is little change for the maximum sea ice area (which is 15–16×10^6 sq.km for both the PI and the LIG. To evaluate the model results we synthesise LIG sea ice data from marine cores collected in the Arctic Ocean, Nordic Seas and northern North Atlantic. The reconstructions for the northern North Atlantic show year-round ice-free conditions, and most models yield results in agreement with these reconstructions. Model–data disagreement appear for the sites in the Nordic Seas close to Greenland and at the edge of the Arctic Ocean. The northernmost site with good chronology, for which a sea ice concentration larger than 75 % is reconstructed even in summer, discriminates those models which simulate too little sea ice. However, the remaining models appear to simulate too much sea ice over the two sites south of the northernmost one, for which the reconstructed sea ice cover is seasonal. Hence models either underestimate or overestimate sea ice cover for the LIG, and their bias does not appear to be related to their bias for the pre-industrial period. Drivers for the inter-model differences are different phasing of the up and down short-wave anomalies over the Arctic Ocean, which are associated with differences in model albedo; possible cloud property differences, in terms of optical depth; and LIG ocean circulation changes which occur for some, but not all, LIG simulations. Finally, we note that inter-comparisons between the LIG simulations and simulations for future climate with moderate (1 %/yr) CO2 increase show a relationship between LIG sea ice and sea ice simulated under CO2 increase around the years of doubling CO2. The LIG may therefore yield insight into likely 21st century Arctic sea ice changes using these LIG simulations.

Arctic sea ice↗

KELT-23Ab: A Hot Jupiter Transiting a Near-solar Twin Close to the TESS and JWST Continuous Viewing Zones

We announce the discovery of KELT-23Ab, a hot Jupiter transiting the relatively bright(V = 10.3) star BD+66911(TYC 4187-996-1), and characterize the system using follow-up photometry and spectroscopy. A global fit to the system yields host-star properties of= T5900 49effK,=-+MM0.9450.0540.060*, = RR0.995 0.015*, =-+LL1.0820.0480.051*, =-+ glog 4.4180.0250.026 (cgs), and=- Fe H0.105 0.077. KELT-23Ab is a hot Jupiter with a mass of= -+ MM0.938P0.0420.045J, radius of = RR1.322 0.025PJ, and density of r=-+ 0.504P0.0350.038gcm − 3. Intense insolation flux from the star has likely caused KELT-23Ab to become inflated. The time of inferior conjunction is=T2458149.40776=0.00091 BJD0TDB and the orbital period is=-+P2.2553530.0000300.000031days. There is strong evidence that KELT-23A is a member of a long-period binary star system with a less luminous companion, and due to tidal interactions, the planet is likely to spiral into its host within roughly a gig a year. This system has one of the highest positive ecliptic latitudes of all transiting planet hosts known to date, placing it near the Transiting Planet Survey Satellite and James Webb Space Telescope continuous viewing zones. Thus we expect it to be an excellent candidate for long-term monitoring and follow up with these facilities.

Planets and satalite detection↗