Search NASA⌕ Search

SEARCH · Search NASA

Results for “InP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Auger Dynamics in InP/ZnSe/ZnS Quantum Dots Having Pure and Doped Shells

In this study, we report the negative trion and biexciton Auger dynamics in very high-quality InP/ZnSe/ZnS quantum dots (QDs) having varying amounts of indium-based traps in the ZnSe shell. Negative trion times are determined by time-correlated photon-counting measurements on QDs that have been photoreduced with lithium triethylborohydride. We find that the Auger times vary from 280 to 425 ps and scale linearly with the total particle volume. Excess indium in the ZnSe shell gives rise to hole traps that are transiently populated following photoexcitation. Comparing stoichiometric and nonstoichiometric particles, we find that the negative trion lifetimes are independent of the presence of indium in the ZnSe shell. Biexciton dynamics are determined from transient absorption (TA) bleach recovery measurements. Absorption of two photons results in the formation of two types of biexcitons: those having both holes in the InP core (XX state) and those having one hole trapped in the ZnSe shell (XT state). XX state Auger times are measured in stoichiometric QDs, and for these particles, the Auger times are ~80 ps. Nonstoichiometric QDs show an additional long TA decay component, assigned to Auger recombination of the XT state. Here, a previous study (J. Phys. Chem. C 2021, 125, 4110–4118) found that hole trapping at indium-based shell traps results in a slow photoluminescence (PL) rise component. We find that the fraction of the XT state formed by the absorption of two photons correlates with the product of the fraction of slow PL rise and the rise time constant following one-photon excitation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Measuring Relative Energies of Ligand Binding Conformations on Nanocluster Surfaces with Temperature-Dependent FTIR Spectroscopy

We present a method to measure relative energies between binding conformations of carboxylate ligands on InP magic-sized clusters in solution. Using Markov chain Monte Carlo global fitting analysis on temperature-dependent vibrational spectra of cluster-bound ligands, we observe significantly different relative energies between various bidentate and monodentate binding motifs. Relative to the monodentate motif, the chelating conformation is 0.7 ± 0.3 kcal/mol more stable and the syn–syn bridging conformation is 1.1 ± 0.5 kcal/mol more stable, but the syn–anti bridging conformation exhibits no significant difference. Our results demonstrate that the relative energy between monodentate-bound carboxylates and unbound carboxylic acids is 4.52 ± 0.05 kcal/mol, or 1582 ± 19 cm –1 , nearly identical to the carboxylate asymmetric stretching frequency. Here, we suggest that the ligand vibrational energy may play a key role in ligand dissociation by compensating for energy differences between bound and dissociated ligand states. This approach gives important experimental insights into ligand binding and can inform future nanocrystal surface engineering.

Conformation↗
DOE OSTI2018

Electronic Structure and Dynamics of Copper-Doped Indium Phosphide Nanocrystals Studied with Time-Resolved X-ray Absorption and Large-Scale DFT Calculations

Here, the recent development of time-resolved X-ray absorption spectroscopy (TR-XAS) has opened avenues for fundamental research on doped semiconductors. Reported herein are results on the successful doping of indium phosphide nanocrystals (NCs) with copper and subsequent charactenzation with time-resolved X-ray studies and largescale density functional theory (DFT) calculations. The synthetic protocol that was based on the cluster seed method afforded control of both the doping level and the quantity of NCs produced in a batch. The stability of the colloidal dispersion allowed us to monitor the photophysical properties of copper guest ions with static and TR-XAS at the copper K-edge. These data reveal that copper captures a hole from the photoexcited InP NC, and relaxation to the ground state occurs via multiple timescales likely due to the presence of interior and surface-bound dopant ions as well as recombination with surfaceand defect-trapped electrons. Large-scale DFT calculations reveal a striking dependence of the electronic structure on the ligand coating and other effects such as self-compensation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Covalently Linked, Two-Dimensional Quantum Dot Assemblies

Using nanoscale building blocks to construct hierarchical materials is a radical new branch point in materials discovery that promises new structures and emergent functionality. Understanding the design principles that govern nanoparticle assembly is critical to moving this field forward. By exploiting mixed ligand environments to target patchy nanoparticle surfaces, we have demonstrated a novel method of colloidal quantum dot (QD) assembly that gives rise to 2D structures. The equilibration of solutions of spherical and quasispherical QDs, including CdS, CdSe, and InP, with 2,2'-bipyridine-5,5'-diacrylic acid resulted in the preferential formation of 2D assemblies over the course of days as determined by transmission electron microscopy analysis. Small-angle X-ray scattering confirms the existence of the QD assemblies in solution. The dependence of the assembly on linker properties (length and rigidity), linker concentration, and total concentration was investigated, together with the data point to a mechanism involving ligand redistribution to create a patchy surface that maximizes the steric repulsion of neighboring QDs. By operating in an underexchanged regime, the arising patchiness results in enthalpically preferred directions of cross-linking that can be accessed by thermal equilibration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Faraday Rotation Due to Surface States in the Topological Insulator (Bi 1– x Sb x ) 2 Te 3

For this research, using magneto-infrared spectroscopy, we have explored the charge dynamics of (Bi,Sb) 2 Te 3 thin films on InP substrates. From the magneto-transmission data we extracted three distinct cyclotron resonance (CR) energies that are all apparent in the broad band Faraday rotation (FR) spectra. This comprehensive FR-CR data set has allowed us to isolate the response of the bulk states from the intrinsic surface states associated with both the top and bottom surfaces of the film. Finally, the FR data uncovered that electron- and hole-type Dirac Fermions reside on opposite surfaces of our films, which paves the way for observing many exotic quantum phenomena in topological insulators.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Measurements of the Thermal Resistivity of InAlAs, InGaAs, and InAlAs/InGaAs Superlattices

Thermal management efforts in nanoscale devices must consider both the thermal properties of the constituent materials and the interfaces connecting them. It is currently unclear whether alloy/alloy semiconductor superlattices such as InAlAs/InGaAs have lower thermal conductivities than their constituent alloys. We report measurements of the crossplane thermal resistivity of InAlAs/InGaAs superlattices at room temperature, showing that the superlattice resistivities are larger by a factor of 1.2–1.6 than that of the constituent bulk materials, depending on the strain state and composition. We show that the additional resistance present in these superlattices can be tuned by a factor of 2.5 by altering the lattice mismatch and thereby the phonon-mode mismatch at the interfaces, a principle that is commonly assumed for superlattices but has not been experimentally verified without adding new elements to the layers. We find that the additional resistance in superlattices does not increase significantly when the layer thickness is decreased from 4 to 2 nm. Here, we also report measurements of 250–1000 nm thick films of undoped InGaAs and InAlAs lattice-matched to InP substrates, for there is no published thermal conductivity value for the latter, and we find it to be 2.24 ± 0.09 at 22 °C, which is ~2.7 times smaller than the widely used estimates.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Aerosol Composition, Mixing State, and Phase State of Free Tropospheric Particles and Their Role in Ice Cloud Formation

The prediction of ice cloud formation in the atmosphere remains challenging. Free tropospheric aerosols can act as ice nucleating particles (INPs), affecting cloud properties and precipitation. The physicochemical properties of free tropospheric particles are modified upon long-range transport by different atmospheric processes. These modifications affect the ice formation potential of individual particles. We investigated free tropospheric particles collected at the remote Pico Mountain Observatory at 2225m a.s.l. in the North Atlantic Ocean using multimodal microspectroscopy and chemical imaging techniques. We probed their ice nucleation activity using an ice nucleation stage interfaced with an environmental scanning electron microscope. Retroplume analysis, chemical imaging, and micro-spectroscopy analysis indicated that the size-resolved chemical composition, mixing state, and phase state of the articles with similar aging times but different transport patterns were substantially different. Relative humidity-dependent glass transition temperatures estimated from meteorological conditions were consistent with the observed organic component of the particles' phase. More viscous (solid and semi-solid-like) particles are more ice active in deposition mode at temperature ranging from 205-220 K than those less viscous particles. Finally, this study provides a better understanding of the phase and mixing state of long range transported free tropospheric aerosols and their role in ice cloud formation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

Imaging Atomic-Scale Clustering in III–V Semiconductor Alloys

Quaternary alloys are essential for the development of high-performance optoelectronic devices. However, immiscibility of the constituent elements can make these materials vulnerable to phase segregation, which degrades the optical and electrical properties of the solid. High-efficiency III–V photovoltaic cells are particularly sensitive to this degradation. InAlAsSb lattice matched to InP is a promising candidate material for high-bandgap subcells of a multijunction photovoltaic device. However, previous studies of this material have identified characteristic signatures of compositional variation, including anomalous low-energy photoluminescence. In this paper, atomic-scale clustering is observed in InAlAsSb via quantitative scanning transmission electron microscopy. Finally, image quantification of atomic column intensity ratios enables the comparison with simulated images, confirming the presence of nonrandom compositional variation in this multispecies alloy.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Nanocrystals in Molten Salts and Ionic Liquids: Experimental Observation of Ionic Correlations Extending beyond the Debye Length

The nature of the interface between the solute and the solvent in a colloidal solution has attracted attention for a long time. For example, the surface of colloidal nanocrystals (NCs) is specially created to impart colloidal stability in a variety of polar and nonpolar solvents. This work focuses on a special type of colloids where the solvent is a molten inorganic salt or organic ionic liquid. The stability of such colloids is difficult to rationalize because solvents with high density of mobile charges efficiently screen the electrostatic double-layer repulsion, and purely ionic molten salts represent an extreme case where the Debye length is only similar to 1 angstrom. We introduce a detailed investigation of NC dispersions in molten salts and ionic liquids using small-angle X-ray scattering (SAXS), atomic pair distribution function (PDF) analysis and molecular dynamics (MD) simulations. Our SAXS analysis confirms that a wide variety of NCs (Pt, CdSe/CdS, InP, InAs, ZrO 2 ) can be uniformly dispersed in molten salts like AlCl 3 /NaCl/KCl (AlCl 3 /AlCl 4 - ) and NaSCN/KSCN and in ionic liquids like 1-butyl-3-methylimidazolium halides (BMIM + X - , where X = Cl, Br, I). By using a combination of PDF analysis and molecular modeling, we demonstrate that the NC surface induces a solvent restructuring with electrostatic correlations extending an order of magnitude beyond the Debye screening length. These strong oscillatory ion-ion correlations, which are not accounted by the traditional mechanisms of steric and electrostatic stabilization of colloids, offer additional insight into solvent-solute interactions and enable apparently "impossible" colloidal stabilization in highly ionized media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Radiation Tolerant Nanowire Array Solar Cells

Space power systems require photovoltaics that are lightweight, efficient, reliable, and capable of operating for years or decades in space environment. Current solar panels use planar multi-junction, III-V based solar cells with very high efficiency, but their specific power (power to weight ratio) is limited by the added mass of radiation shielding (e.g. coverglass) required to protect the cells from the high-energy particle radiation that occurs in space. Here we demonstrate that III-V nanowire-array solar cells have dramatically superior radiation performance relative to planar solar cell designs and show this for multiple cell geometries and materials, including GaAs and InP. Nanowire cells exhibit damage thresholds ranging from ~10-40 times higher than planar control solar cells when subjected to irradiation by 100-350 keV protons and 1 MeV electrons. Furthermore, using Monte Carlo simulations, we show that this improvement is due in part to a reduction in the displacement defect generation within the wires arising from their nanoscale dimensions. Radiation tolerance, combined with the efficient optical absorption and the improving performance of nanowire photovoltaics, indicates that nanowire arrays could provide a pathway to realize high-specific-power, substrate-free, III-V space solar cells with substantially reduced shielding requirements. More broadly, the exceptional reduction in radiation damage suggests that nanowire architectures may be useful in improving the radiation tolerance of other electronic and optoelectronic devices.

14 SOLAR ENERGY↗
DOE OSTI2015

p-Type Transparent Conducting Oxide/n-Type Semiconductor Heterojunctions for Efficient and Stable Solar Water Oxidation

Achieving stable operation of photoanodes used as components of solar water splitting devices is essential to realizing the promise of this renewable energy technology. It is demonstrated that p-type transparent conducting oxides (p-TCOs) can function both as a selective hole contact and corrosion protection layer for photoanodes used in light-driven water oxidation. Using NiCo 2 O 4 as the p-TCO and n-type Si as a prototypical light absorber, a rectifying heterojunction capable of light driven water oxidation was created. By placing the charge separating junction in the Si using a np + structure and by incorporating a highly active heterogeneous Ni-Fe oxygen evolution catalyst, efficient light-driven water oxidation can be achieved. In this structure, oxygen evolution under AM 1.5 G illumination occurs at 0.95 V vs RHE, and the current density at the reversible potential for water oxidation (1.23 V vs RHE) is >25 mA cm -2 . Stable operation was confirmed by observing a constant current density over 72 h and by sensitive measurements of corrosion products in the electrolyte. In situ Raman spectroscopy was employed to investigate structural transformation of NiCo 2 O 4 during electrochemical oxidation. The interface among the light absorber and p-TCO is crucial to produce selective hole conduction to the surface under illumination. For example, annealing to produce more crystalline NiCo 2 O 4 produces only small changes in its hole conductivity, while a thicker SiO x layer is formed at the n-Si/p-NiCo 2 O 4 interface, greatly reducing the PEC performance. The generality of the p-TCO protection approach is demonstrated by multihour, stable, water oxidation with n-InP/p-NiCo 2 O 4 heterojunction photoanodes.

Chen, Le↗
DOE OSTI2015

Solution Phase Synthesis of Indium Gallium Phosphide Alloy Nanowires

The tunable physical and electronic structure of III–V semiconductor alloys renders them uniquely useful for a variety of applications, including biological imaging, transistors, and solar energy conversion. However, their fabrication typically requires complex gas phase instrumentation or growth from high-temperature melts, which consequently limits their prospects for widespread implementation. Furthermore, the need for lattice matched growth substrates in many cases confines the composition of the materials to a narrow range that can be epitaxially grown. In this work, we present a solution phase synthesis for indium gallium phosphide (In x Ga 1–x P) alloy nanowires, whose indium/gallium ratio, and consequently, physical and electronic structure, can be tuned across the entire x = 0 to x = 1 composition range. We demonstrate the evolution of structural and optical properties of the nanowires, notably the direct to indirect band gap transition, as the composition is varied from InP to GaP. Our scalable, low-temperature synthesis affords compositional, structural, and electronic tunability and can provide a route for realization of broader In x Ga 1–x P applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Estimation of Sea Spray Aerosol Surface Area Over the Southern Ocean Using Scattering Measurements

This study focuses on methods to estimate dry marine aerosol surface area (SA) from bulk optical measurements. Aerosol SA is used in many models' ice nucleating particle (INP) parameterizations, as well as influencing particle light scattering, hygroscopic growth, and reactivity, but direct observations are scarce in the Southern Ocean (SO). Two campaigns jointly conducted in austral summer 2018 provided co-located measurements of aerosol SA from particle size distributions and lidar to evaluate SA estimation methods in this region. Mie theory calculations based on measured size distributions were used to test a proposed approximation for dry aerosol SA, which relies on estimating effective scattering efficiency (Q) as a function of Ångström exponent (å). For distributions with dry å < 1, Q = 2 was found to be a good approximation within ±50%, but for distributions with dry å > 1, an assumption of Q = 3 as in some prior studies underestimates dry aerosol SA by a factor of 2 or more. We propose a new relationship between dry å and Q, which can be used for –0.2 < å < 2, and suggest å = 0.8 as the cutoff between primary and secondary marine aerosol-dominated distributions. Application of a published methodology to retrieve dry marine aerosol SA from lidar extinction profiles overestimated aerosol SA by a factor of 3–5 during these campaigns. Using Microtops aerosol optical thickness measurements, we derive alternative lidar conversion parameters from our observations, applicable to marine aerosol over the SO.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Model of metabolism and gene expression predicts proteome allocation in Pseudomonas putida

Abstract The genome-scale model of metabolism and gene expression (ME-model) forPseudomonas putidaKT2440,iPpu1676-ME, provides a comprehensive representation of biosynthetic costs and proteome allocation. Compared to a metabolic-only model,iPpu1676-ME significantly expands on gene expression, macromolecular assembly, and cofactor utilization, enabling accurate growth predictions without additional constraints. Multi-omics analysis using RNA sequencing and ribosomal profiling data revealed translational prioritization inP. putida, with core pathways, such as nicotinamide biosynthesis and queuosine metabolism, exhibiting higher translational efficiency, while secondary pathways displayed lower priority. Notably, the ME-model significantly outperformed the M-model in alignment with multi-omics data, thereby validating its predictive capacity. Thus,iPpu1676-ME offers valuable insights intoP. putida’s proteome allocation and presents a powerful tool for understanding resource allocation in this industrially relevant microorganism.

Mathematical & Computational Biology↗
DOE OSTI2020

In-plane selective area InSb–Al nanowire quantum networks

Abstract Strong spin–orbit semiconductor nanowires coupled to a superconductor are predicted to host Majorana zero modes. Exchange (braiding) operations of Majorana modes form the logical gates of a topological quantum computer and require a network of nanowires. Here, we utilize an in-plane selective area growth technique for InSb–Al semiconductor–superconductor nanowire networks. Transport channels, free from extended defects, in InSb nanowire networks are realized on insulating, but heavily mismatched InP (111)B substrates by full relaxation of the lattice mismatch at the nanowire/substrate interface and nucleation of a complete network from a single nucleation site by optimizing the surface diffusion length of the adatoms. Essential quantum transport phenomena for topological quantum computing are demonstrated in these structures including phase-coherence lengths exceeding several micrometers with Aharonov–Bohm oscillations up to five harmonics and a hard superconducting gap accompanied by 2 e -periodic Coulomb oscillations with an Al-based Cooper pair island integrated in the nanowire network.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2013

A direct thin-film path towards low-cost large-area III-V photovoltaics

III-V photovoltaics (PVs) have demonstrated the highest power conversion efficiencies for both single- and multi-junction cells. However, expensive epitaxial growth substrates, low precursor utilization rates, long growth times, and large equipment investments restrict applications to concentrated and space photovoltaics (PVs). Here, we demonstrate the first vapor-liquid-solid (VLS) growth of high-quality III-V thin-films on metal foils as a promising platform for large-area terrestrial PVs overcoming the above obstacles. We demonstrate 1–3 mm thick InP thin-films on Mo foils with ultra-large grain size up to 100 mm, which is ,100 times larger than those obtained by conventional growth processes. The films exhibit electron mobilities as high as 500 cm2 /V-s and minority carrier lifetimes as long as 2.5 ns. Furthermore, under 1-sun equivalent illumination, photoluminescence efficiency measurements indicate that an open circuit voltage of up to 930 mV can be achieved, only 40 mV lower than measured on a single crystal reference wafer.

14 SOLAR ENERGY↗
DOE OSTI2022

Probing crystallographic orientation-specific carrier lifetimes in epitaxial Ge/AlAs and InGaAs/InP heterostructures

Current silicon (Si) fin transistors rely on (100) and (110) crystallographically oriented surfaces, and the proposed alternate channel transistor technology comprises materials with higher mobility than Si. Crystallographically oriented epitaxial germanium (Ge) and indium–gallium arsenide (InGaAs) have the potential to replace Si in ultra-low power transistor applications. The higher carrier lifetime is an indication of superior material quality, which relates to the leakage current of a fin transistor. To gain insights into the carrier recombination dynamics in these crystallographically oriented epitaxial Ge and InGaAs layers, the contactless microwave photoconductive decay (μ-PCD) technique at an excitation wavelength of 1500 nm was employed to probe the orientation-specific carrier lifetimes. Highly effective carrier lifetimes >200 ns for (100)Ge/AlAs and (110)Ge/AlAs, and ~80 ns for (111)Ge/AlAs heterostructures, were extracted at room temperature. The measured carrier lifetime has a strong dependence on the surface orientation, which could be related to orientation-specific bulk trap states present within the bandgap of Ge. The (111)Ge orientation has 3 times lower carrier lifetime compared to the (100)Ge and (110)Ge surface orientations. On the other hand, the carrier lifetimes of 125 μs and 10 ns were determined from (100)InGaAs/InP and (110)InGaAs/InP heterostructures, respectively. The reduction in carrier lifetimes in both (111)Ge and (110)InGaAs was due to high electrical conductivity or higher bulk trap states present within the bandgap as well as the facet-dependent growth of the (110)InGaAs layer on InP. A surface passivating layer is indispensable for these orientation-specific epitaxial layers to improve the carrier lifetime. Therefore, the higher carrier lifetimes from technologically interesting (100)Ge and (110)Ge surfaces would offer a path for the development of Ge-based ultra-low power electronics, and optoelectronic devices based on the (100)InGaAs layer.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Pressure-stimulus-responsive behaviors of core–shell InP/ZnSe nanocrystals: remarkable piezochromic luminescence and structural assembly

Piezochromic luminescence materials with optical properties can be adjusted (the colors most sensitive to the human eye range from red to green) to provide powerful means for information acquisition in various applications. Inorganic quantum dots, typically based on heavy metals such as cadmium and lead, have congenital advantages as luminescence materials, including strong inoxidizability and excellent photoelectric properties. However, small band-gap shifts under pressure have hindered the development of inorganic-based piezochromic materials. In this study, we combined in situ high-pressure photoluminescence (PL) and absorption measurements with synchrotron X-ray scattering spectra to elucidate the remarkable modulation of optical properties and morphologies by pressure, particularly that of the piezochromic luminescence, in all-inorganic core–shell InP/ZnSe nanocrystals (NCs). We observed a stepwise PL color change from red to green, and an ultrabroad bandgap tunability of 0.46 eV was observed from 1.99 to 2.45 eV in the pressure range of 14.2 GPa for InP/ZnSe NCs. Moreover, two-dimensional (2D) InP/ZnSe nanosheets were synthesized by the stress-driven attachment of nanoparticles. These results demonstrate the ability of the pressure-stimulus response to trigger remarkable piezochromic luminescence and 2D nanosheet assembly in InP/ZnSe NCs, which paves the way for new applications of all-inorganic InP-based semiconductor NCs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗