Search NASA⌕ Search

SEARCH · Search NASA

Results for “LIGNITE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Hydrogen Dissociation on Pd 4 S Surfaces

Exposure of Pd-based hydrogen purification membranes to H 2 S, a common contaminant in coal gasification streams, can cause membrane performance to deteriorate, either by deactivating surface sites required for dissociative H 2 adsorption or by forming a low-permeability sulfide scale. In this work, the composition, structure, and catalytic activity of Pd 4 S, a surface scale commonly observed in Pd-membrane separation of hydrogen from sulfur-containing gas streams, were examined using a combination of experimental characterization and density functional theory (DFT) calculations. A Pd 4 S sample was prepared by exposing a 100 μm Pd foil to H 2 S at 908 K. Both X-ray photoemission depth profiling and low energy ion scattering spectroscopic (LEISS) analysis reveal slight sulfur-enrichment of the top surface of the sample. This view is consistent with the predictions of DFT atomistic thermodynamic calculations, which identified S-terminated Pd4S surfaces as energetically favored over corresponding Pd-terminated surfaces. Activation barriers for H 2 dissociation on the Pd 4 S surfaces were calculated. Although barriers are higher than on Pd(111), transition state theory analysis identified reaction pathways on the S-terminated surfaces for which hydrogen dissociation rates are high enough to sustain the separation process at conditions relevant to gasification applications.

08 HYDROGEN↗

Fischer Tropsch synthesis : an in-situ TPR-EXAFS/XANES investigation of the influence of Group I alkali promoters on the local atomic and electronic structure of carburized iron/silica catalysts.

The promoting impact of alkali metals (i.e., Li, Na, K, Rb, Cs) on the carburization rate of Fe in Fe/Si catalysts was investigated by X-ray absorption spectroscopy. A multisample holder was used, allowing nearly simultaneous examination of the catalysts during activation in a CO/He mixture. With the white line intensity and shape as a fingerprint for oxidation state, TPR/XANES analysis enabled us to measure the relative composition of the different compounds as a function of the carburization time, temperature, and atomic number of the group 1 promoter. At the same time, TPR/EXAFS provided information on the changes in local atomic structure that accompanied the oxidation state changes. The rate of carburization increased in the following order: unpromoted < Li < Na < K = Rb = Cs. After 10 h of treatment the samples containing K, Rb, and Cs were completely carburized, and residual quantities of iron oxides were detected in both unpromoted and Li-promoted samples. The EXAFS spectra after carburization could be fitted well by considering a model containing Hagg carbide and Fe{sub 3}O{sub 4}. After 10 h of CO/He treatment at 290 C, the main component observed was Hagg carbide. A model containing Hagg and {var_epsilon}-carbides, and Fe{sub 3}O{sub 4}, was also investigated. However, the r-factor was not significantly impacted by including {var_epsilon}-carbide in the fitting, and the resulting contribution of {var_epsilon}-carbide in each catalyst from the model was virtually negligible. Selectivity differences are thus not likely due to changes in the carbide distribution. Rather, the alkali promoter increases the CO dissociative adsorption rate, resulting in an increase in the surface coverage of dissociated CO and an inhibition in the olefin readsorption rate. This in turn results in higher olefin selectivities, in agreement with previous catalytic tests.

01 COAL, LIGNITE, AND PEAT↗

Functionalization of delaminated zeolite ITQ-6 for the adsorption of carbon dioxide

Novel functionalized adsorbents for CO{sub 2} separation were synthesized by grafting 3-aminopropyl, 3-(methylamino) propyl, or 3-(phenylamino)propyl ligands in the delaminated zeolite ITQ-6. On the basis of the texture parameters determined from nitrogen adsorption isotherms recorded at 77 K and the results of chemical analysis, physicochemical properties of functionalized ITQ-6 were evaluated and compared with those of mesoporous SBA-15 silica functionalized with the same ligands. To examine carbon dioxide adsorption on functionalized materials, adsorption isotherms at 293 K were measured. To obtain information on the surface energetics of CO{sub 2} adsorption on selected samples, isotherms were taken in the temperature range front 273 to 333 K and adsorption isosteres were calculated. Isosteric adsorption heats determined from the slope of adsorption isosteres proved that all of the 3-aminopropyl ligands in ITQ-6 take part in CO{sub 2} adsorption. It was found that in the whole region of CO{sub 2} pressures the efficiency of the amine ligand, defined as the number of adsorbed CO{sub 2} molecules per one airline ligand, is higher for functionalized ITQ-6 than for functionalized SBA-15 silica.

01 COAL, LIGNITE, AND PEAT↗

Fundamentals of high pressure adsorption

High-pressure adsorption attracts research interests following the world's attention to alternative fuels, and it exerts essential effect on the study of hydrogen/methane storage and the development of novel materials addressing to the storage. However, theoretical puzzles in high-pressure adsorption hindered the progress of application studies. Therefore, the present paper addresses the major theoretical problems that challenged researchers: i.e., how to model the isotherms with maximum observed in high-pressure adsorption; what is the adsorption mechanism at high pressures; how do we determine the quantity of absolute adsorption based on experimental data. Ideology and methods to tackle these problems are elucidated, which lead to new insights into the nature of high-pressure adsorption and progress in application studies, for example, in modeling multicomponent adsorption, hydrogen storage, natural gas storage, and coalbed methane enrichment, was achieved.

01 COAL, LIGNITE, AND PEAT↗

Revealing Correlation of Valence State with Nanoporous Structure in Cobalt Catalyst Nanoparticles by In situ Environmental TEM

Simultaneously probing the electronic structure and morphology of materials at the nanometer or atomic scale while a chemical reaction proceeds is significant for understanding the underlying reaction mechanisms and optimizing a materials design. This is especially important in the study of nanoparticle catalysts, yet such experiments have rarely been achieved. Utilizing an environmental transmission electron microscope equipped with a differentially pumped gas cell, we are able to conduct nanoscopic imaging and electron energy loss spectroscopy in situ for cobalt catalysts under reaction conditions. Studies reveal quantitative correlation of the cobalt valence states with the particles' nanoporous structures. The in situ experiments were performed on nanoporous cobalt particles coated with silica, while a 15 mTorr hydrogen environment was maintained at various temperatures (300-600 C). When the nanoporous particles were reduced, the valence state changed from cobalt oxide to metallic cobalt and concurrent structural coarsening was observed. In situ mapping of the valence state and the corresponding nanoporous structures allows quantitative analysis necessary for understanding and improving the mass activity and lifetime of cobalt-based catalysts, for example, for Fischer-Tropsch synthesis that converts carbon monoxide and hydrogen into fuels, and uncovering the catalyst optimization mechanisms.

01 COAL, LIGNITE, AND PEAT↗

Glionitrin A, an antibiotic-antitumor metabolite derived from competitive interaction between abandoned mine microbes

The nutrient conditions present in abandoned coal mine drainages create an extreme environment where defensive and offensive microbial interactions could be critical for survival and fitness. Coculture of a mine drainage-derived Sphingomonas bacterial strain, KMK-001, and a mine drainage-derived Aspergillus fumigatus fungal strain, KMC-901, resulted in isolation of a new diketopiperazine disulfide, glionitrin A (1). Compound 1 was not detected in monoculture broths of KMK-001 or KMC-901. The structure of 1, a (3S,10aS) diketopiperazine disulfide containing a nitro aromatic ring, was based on analysis of MS, NMR, and circular dichroism spectra and confirmed by X-ray crystal data. Glionitrin A displayed significant antibiotic activity against a series of microbes including methicillin-resistant Staphylococcus aureus. An in vitro MTT cytotoxicity assay revealed that 1 had potent submicromolar cytotoxic activity against four human cancer cell lines: HCT-116, A549, AGS, and DU145. The results provide further evidence that microbial coculture can produce novel biologically relevant molecules.

01 COAL, LIGNITE, AND PEAT↗

Export of reactive nitrogen from coal-fired power plants in the U.S.: Estimates from a plume-in-grid modeling study - article no. D04308

The export of reactive nitrogen (nitrogen oxides and their oxidation products, collectively referred to as NOy) from coal-fired power plants in the U.S. to the rest of the world could have a significant global contribution to ozone. Traditional Eulerian gridded air quality models cannot characterize accurately the chemistry and transport of plumes from elevated point sources such as power plant stacks. A state-of-the-science plume-in-grid (PinG) air quality model, a reactive plume model embedded in an Eulerian gridded model, is used to estimate the export of NOy from 25 large coal-fired power plants in the U. S. (in terms of NOx and SO{sub 2} emissions) in July 2001 to the global atmosphere. The PinG model used is the Community Multiscale Air Quality Model with Advanced Plume Treatment (CMAQ-APT). A benchmark simulation with only the gridded model, CMAQ, is also conducted for comparison purposes. The simulations with and without advanced plume treatment show differences in the calculated export of NOy from the 25 plants considered reflecting the effect of using a detailed and explicit treatment of plume transport and chemistry. The advanced plume treatment results in 31% greater simulated export of NOy compared to the purely grid-based modeling approach. The export efficiency of NOy (the fraction of NOy emitted that is exported) is predicted to be 21% without APT and 27% with APT. When considering only export through the eastern boundary across the Atlantic, CMAQ-APT predicts that the export efficiency is 24% and that 2% of NOy is exported as NOx, 49% as inorganic nitrate, and 25% as PAN. These results are in reasonably good agreement with an analysis reported in the literature of aircraft measurements over the North Atlantic.

01 COAL, LIGNITE, AND PEAT↗

Long-range southeastward transport of Asian biosmoke pollution: Signature detected by aerosol potassium in Northern Taiwan - article no. D14301

Total potassium was determined in aerosol particles between 2002 and early 2007 in northern Taiwan (25{sup o} 02'N, 121{sup o} 31'E). Biosmoke potassium (non-sea-salt/noncrustal) was assessed and used as a tracer of biosmoke pollution, which essentially represents the combination of coal and biofuel combustion and biomass burning. PM10-associated potassium displays a typical seasonality, peaking during the winter and waning during the summer. The size distribution showed a bimodal pattern, peaking at a supermicron size (2.5-5.{mu}m) and at around 1 {mu}m, demonstrating multiple sources. Size distribution patterns revealed an evident seasonality, indicative of the different domination of natural and biosmoke sources in the two main periods of the northeasterly and summer monsoons, respectively. The relative contributions of biosmoke and natural sources to the total potassium were estimated to be 50-75% and 25-50%, respectively; the seasonality of biosmoke potassium is similar to that of total potassium. Substantial correlations existed between biosmoke potassium and selected trace metals (As, Se, Pb, and Mn), suggesting that the latter are essentially associated with biosmoke pollution. Another significant finding is that the seasonal mean concentrations of aerosol potassium between 2002 and early 2007 tend to increase. This could primarily be attributed to the increased consumption of coal in China, posing an urgent issue relevant to pollution mitigation in China. The southward inflow flux of biosmoke potassium to the south of 25{sup o} N during the northeasterly monsoon months has been estimated to be 56-79 mg m{sup -2} d{sup -1}, which could be applied to the assessment of other biosmoke-related species.

01 COAL, LIGNITE, AND PEAT↗

Iron Speciation and Mixing in Single Aerosol Particles from the Asian Continental Outflow

Bioavailable iron from atmospheric aerosol is an essential nutrient that can control oceanic productivity, thereby impacting the global carbon budget and climate. Particles collected on Okinawa Island during an atmospheric pollution transport event from China were analyzed using complementary single particle techniques to determine the iron source and speciation. Comparing the spatial distribution of iron within ambient particles and standard Asian mineral dust, it was determined that field-collected atmospheric Fe-containing particles have numerous sources, including anthropogenic sources such as coal combustion. Fe-containing particles were found to be internally mixed with secondary species such as sulfate, soot, and organic carbon. The mass weighted average Fe(II) fraction (defined as Fe(II)/[Fe(II)+Fe(III)]) was determined to be 0.33 {+-} 0.08. Within the experimental uncertainty, this value lies close to the range of 0.26-0.30 determined for representative Asian mineral dust. Previous studies have indicated that the solubility of iron from combustion is much higher than that from mineral dust. Therefore, chemical and/or physical differences other than oxidation state may help explain the higher solubility of iron in atmospheric particles.

01 COAL, LIGNITE, AND PEAT↗

Quantifying operational lifetimes for coal power plants under the Paris goals

A rapid transition away from unabated coal use is essential to fulfilling the Paris climate goals. However, many countries are actively building and operating coal power plants. Here we use plant-level data to specify alternative trajectories for coal technologies in an integrated assessment model. We then quantify cost-effective retirement pathways for global and country-level coal fleets to limit long-term temperature change. We present our results using a decision-relevant metric: the operational lifetime limit. Even if no new plants are built, the lifetimes of existing units are reduced to approximately 35 years in a well-below 2 °C scenario or 20 years in a 1.5 °C scenario. The risk of continued coal expansion, including the near-term growth permitted in some Nationally Determined Contributions (NDCs), is large. The lifetime limits for both 2 °C and 1.5 °C are reduced by 5 years if plants under construction come online and 10 years if all proposed projects are built.

01 COAL, LIGNITE, AND PEAT↗

Urban mining by flash Joule heating

Abstract Precious metal recovery from electronic waste, termed urban mining, is important for a circular economy. Present methods for urban mining, mainly smelting and leaching, suffer from lengthy purification processes and negative environmental impacts. Here, a solvent-free and sustainable process by flash Joule heating is disclosed to recover precious metals and remove hazardous heavy metals in electronic waste within one second. The sample temperature ramps to ~3400 K in milliseconds by the ultrafast electrical thermal process. Such a high temperature enables the evaporative separation of precious metals from the supporting matrices, with the recovery yields >80% for Rh, Pd, Ag, and >60% for Au. The heavy metals in electronic waste, some of which are highly toxic including Cr, As, Cd, Hg, and Pb, are also removed, leaving a final waste with minimal metal content, acceptable even for agriculture soil levels. Urban mining by flash Joule heating would be 80× to 500× less energy consumptive than using traditional smelting furnaces for metal-component recovery and more environmentally friendly.

01 COAL, LIGNITE, AND PEAT↗

Phase controlled synthesis of transition metal carbide nanocrystals by ultrafast flash Joule heating

Nanoscale carbides enhance ultra-strong ceramics and show activity as high-performance catalysts. Traditional lengthy carburization methods for carbide syntheses usually result in coked surface, large particle size, and uncontrolled phase. Here, a flash Joule heating process is developed for ultrafast synthesis of carbide nanocrystals within 1 s. Various interstitial transition metal carbides (TiC, ZrC, HfC, VC, NbC, TaC, Cr 2 C 3 , MoC, and W 2 C) and covalent carbides (B 4 C and SiC) are produced using low-cost precursors. By controlling pulse voltages, phase-pure molybdenum carbides including β-Mo 2 C and metastable α-MoC 1-x and η-MoC 1-x are selectively synthesized, demonstrating the excellent phase engineering ability of the flash Joule heating by broadly tunable energy input that can exceed 3000 K coupled with kinetically controlled ultrafast cooling (>10 4 K s –1 ). Theoretical calculation reveals carbon vacancies as the driving factor for topotactic transition of carbide phases. The phase-dependent hydrogen evolution capability of molybdenum carbides is investigated with β-Mo 2 C showing the best performance.

01 COAL, LIGNITE, AND PEAT↗

Changes in pore structure of coal caused by coal-to-gas bioconversion

Microbial enhanced coalbed methane (ME-CBM) recovery is critically examined as a viable technology for natural gas recovery from coalbed methane (CBM) reservoirs. Since the majority of gas-in-place (GIP) is stored as an adsorbed phase in fine pores of coal matrix, the nano-pore structure directly influences gas storage and transport properties. Only limited studies have quantified the alteration of the nano-pore structure due to ME-CBM treatment. This study examines the evolution of the pore structure using a combination of small angle X-ray scattering (SAXS), low-pressure N 2 and CO 2 adsorption (LPGA) and high-pressure methane adsorption methods. The results show that the surface fractal dimension decreases for the two bioconverted coals compared to the untreated coal. After bio-treatment, the mesopore surface area and pore volume decrease with the average pore diameter increases, while the micropore surface area increases with pore volume decreases. Both inaccessible meso-/micropore size distributions decrease after bioconversion, while the accessible micropore size distribution increases, making a portion of closed micropore network accessible. In addition, the methane adsorption capacities increase after bio-treatment, which is confirmed by the increase of micropore surface area. A conceptual physical model of methanogenesis is proposed based on the evolution of the pore structure.

01 COAL, LIGNITE, AND PEAT↗

Probing the Hydrogen Enhanced Near-Field Emission of ITO without a Vacuum-Gap

In-situ monitoring of the multi-component gas streams in high temperature energy conversion devices offer the promises to higher efficiency via improved understanding of the chemical environments during device operation. While conventional resistive based metal oxide semiconductor gas sensors suffer from strong cross-sensitivity, optical sensing approaches offer intrinsic advantages to achieve gas selectivity based on wavelength specific interactions. This manuscript describes a novel method to achieve multicomponent gas sensing during gas exposure of H2, CO2, CH4and CO in humid high temperature environments. A single sensor element comprised of a perovskite La0.3Sr0.7TiO3(LSTO) oxide thin film layer coated on silica optical fiber was used. The sensing responses consisted of two wavelength-specific near infrared (NIR) mechanisms, namely broadband absorption associated with the metal oxide layer, and wavelength localized thermal emission responses associated with the hydroxyl defects within the silica fiber. Principal component analysis (PCA) was applied to couple the two mechanisms to achieve selective gas identification. Successful discrimination of H2and CO2on a single fiber sensor was achieved, where the results are both stable and reversible. This design demonstrates that by coupling multiple optical mechanisms on a single oxide coated fiber sensor, simple platforms can also achieve multi-component sensing functionality without the added complexity of a sensor array. Thus, it suggests a new approach to construct simple, robust and functional sensor designs capable of gas discrimination and quantification in multi-component gas streams.

01 COAL, LIGNITE, AND PEAT↗

Delayed signatures of underground nuclear explosions

Radionuclide signals from underground nuclear explosions (UNEs) are strongly influenced by the surrounding hydrogeologic regime. One effect of containment is delay of detonation-produced radioxenon reaching the surface as well as lengthening of its period of detectability compared to uncontained explosions. Using a field-scale tracer experiment, we evaluate important transport properties of a former UNE site. Here, we observe the character of signals at the surface due to the migration of gases from the post-detonation chimney under realistic transport conditions. Background radon signals are found to be highly responsive to cavity pressurization suggesting that large local radon anomalies may be an indicator of a clandestine UNE. Computer simulations, using transport properties obtained from the experiment, track radioxenon isotopes in the chimney and their migration to the surface. They show that the chimney surrounded by a fractured containment regime behaves as a leaky chemical reactor regarding its effect on isotopic evolution introducing a dependence on nuclear yield not previously considered. This evolutionary model for radioxenon isotopes is validated by atmospheric observations of radioxenon from a 2013 UNE in the Democratic People’s Republic of Korea (DPRK). In conclusion, our model produces results similar to isotopic observations with nuclear yields being comparable to seismic estimates.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Carbon dioxide (C{sup 16}O{sub 2} and C{sup 18}O{sub 2}) adsorption in zeolite Y materials: effect of cation, adsorbed water and particle size

In this study, CO{sub 2} adsorption in the presence and absence of co-adsorbed H{sub 2}O was investigated in zeolite Y. Several different zeolite Y materials were investigated including commercial NaY, commercial NaY ion-exchanged with Ba{sup 2+} and nanocrystalline NaY; herein referred to as NaY, BaY and nano-NaY. Following heating of these zeolites to 573 K and cooling to room temperature, CO{sub 2} was adsorbed as a function of pressure. FTIR spectra show that a majority of CO{sub 2} adsorbs in the pores of these three zeolites (NaY, BaY and nano-NaY) in a linear complex with the exchangeable cation, as indicated by the intense absorption band near 2350 cm{sup -1}, assigned to the 3 asymmetric stretch of adsorbed CO{sub 2}. Most interestingly is the formation of carbonate and bicarbonate on the external surface of nano-NaY zeolites as indicated by the presence of several broad absorption bands in the 1200-1800 cm{sup -1} region, suggesting unique sites for CO{sub 2} adsorption on the surface of the nanomaterial. For the other two zeolite materials investigated, bicarbonate formation is only evident in BaY zeolite in the presence of co-adsorbed water. Adsorption of {sup 18}O-labeled carbon dioxide and theoretical quantum chemical calculations confirm these assignments and conclusions. 28 refs., 9 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗