Search NASA⌕ Search

SEARCH · Search NASA

Results for “Measuring instruments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Measurement of nanoparticle temperature in a (CO{sub 2}){sub N} cluster beam using SF{sub 6} molecules as tiny probe thermometers

A temperature measurement technique using SF{sub 6} molecules as tiny probe thermometers is described, and results are presented, for large (CO{sub 2}){sub N} van der Waals clusters (with N {>=} 10{sup 2}) in a cluster beam. The SF{sub 6} molecules captured by (CO{sub 2}){sub N} clusters in crossed cluster and molecular beams sublimate (evaporate) after a certain time, carrying information about the cluster velocity and internal temperature. Experiments are performed using detection of these molecules with an uncooled pyroelectric detector and infrared multiphoton excitation. The multiphoton absorption spectra of molecules sublimating from clusters are compared with the IR multiphoton absorption spectra of SF{sub 6} in the incoming beam. As a result, the nanoparticle temperature in the (CO{sub 2}){sub N} cluster beam is estimated as T{sub cl} < 150 K. Time-of-flight measurements using a pyroelectric detector and a pulsed CO{sub 2} laser are performed to determine the velocity (kinetic energy) of SF{sub 6} molecules sublimating from clusters, and the cluster temperature is found to be T{sub cl} = 105 {+-} 15 K. The effects of various factors on the results of nanoparticle temperature measurements are analyzed. The potential use of the proposed technique for vibrational cooling of molecules to low temperatures is discussed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Wide-range structurally optimized channel for monitoring the certified power of small-core reactors

The results of tests of a prototype version of a channel for monitoring the certified power of small-core reactors performed at the BR-K1 reactor at the All-Russian Scientific Research Institute of Experimental Physics are reported. An SNM-11 counter and commercial KNK-4 and KNK-3 compensated ion chambers were used as neutron detectors in the tested channel, and certified NCMM and CCMM measurement modules controlled by a PC with specialized software were used as measuring instruments. The specifics of metrological assurance of calibration of the channel in the framework of reactor power monitoring are discussed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Monitoring the composition of the Cd{sub 1-} {sub z}Zn{sub z}Te heteroepitaxial layers by spectroscopic ellipsometry

A hardware-software complex based on a spectroscopic ellipsometer integrated into a molecular beam epitaxy installation and destined to monitor the composition of the Cd{sub 1} {sub -z}Zn{sub z}Te alloy at small values of z is described. Methodical features of determination of the composition of growing layers by the spectra of ellipsometric parameters are considered. The procedure of determination of the composition by the absorption edge that allows measuring this parameter accurate to 1.2% is developed. Problems are considered the solutions of which will allow one to increase the resolution by the composition. In particular, maintaining a stable temperature during growth is required for this purpose.

36 MATERIALS SCIENCE↗

Data from Adopting Bioenergy Crops: Does Farmers’ Attitude Toward Loss Matter?

We apply prospect theory to examining farmers’ economic incentives to divert a share of their land to bioenergy crops (miscanthus and switchgrass in this study). Numerical simulation is conducted for 1,919 rain‐fed U.S. counties to identify the impact of loss aversion on bioenergy crop adoption, and how this impact is influenced by biomass price, discount rate, credit constraint status, and policy instruments. Results show that ignoring farmer’s loss aversion causes overestimation of miscanthus production but underestimation of switchgrass production, particularly when farmers are credit constrained and have a high discount rate. We find that establishment cost subsidy induces more miscanthus production whereas subsidized energy crop insurance induces more switchgrass production. The efficacy of these two policy instruments, measured by biomass production increased by per dollar of government outlay, depends on the magnitude of farmers’ loss aversion and discount rate.

Economics↗

Solar Resources Measurements in Houston, TX – Equipment Only (CRADA Final Report)

Loaning Texas Southern University equipment in order to perform site-specific, long-term, continuous, and high-resolution measurements of solar irradiance is important for developing renewable resource data. These data are used for several research and development activities consistent with the NREL mission: (1) establish a national 30-year climatological database of measured solar irradiances;(2) provide high quality ground-truth data for satellite remote sensing validation; (3) support development of radiative transfer models for estimating solar irradiance from available meteorological observations; (4) provide solar resource information needed for technology deployment and operations. Data acquired under this agreement will be available to the public through NREL's Measurement &Instrumentation Data Center - MIDC (http://www.nrel.gov/midc) Or the Renewable Resource Data Center - RReDC (http://rredc.nrel.gov). The MIDC offers a variety of standard data display, access, and analysis tools designed to address the needs of a wide user audience (e.g., industry, academia, and government interests).

14 SOLAR ENERGY↗

Experimental Test Plan DOE Tidal and River Reference Turbines

Our aim is to provide details of the experimental test plan for scaled model studies in St. Anthony Falls Laboratory (SAFL) Main Channel at the University of Minnesota, including a review of study objectives, descriptions of the turbine models, the experimental set-up, instrumentation details, instrument measurement uncertainty, anticipated experimental test cases, post-processing methods, and data archiving for model developers.

acoustic Doppler profiler↗

Uncertainty Quantification of Calculated Temperatures for the AGR 3/4 Experiment

A series of Advanced Gas Reactor (AGR) irradiation experiments are being conducted within the Advanced Reactor Technology (ART) Fuel Development and Qualification Program. The main objectives of the fuel experimental campaign are to provide the necessary data on fuel performance to support fuel process development, qualify a fuel design and fabrication process for normal operation and accident conditions, and support development and validation of fuel performance and fission product transport models and codes (PLN 3636, “Technical Program Plan for INL Advanced Reactor Technologies Technology Development Office/Advanced Gas Reactor Fuel Development and Qualification Program”). The AGR 3/4 test was inserted in the Northeast Flux Trap position in the Advanced Test Reactor (ATR) core at Idaho National Laboratory (INL) in December 2011 and successfully completed irradiation in mid-April 2014, resulting in irradiation of the tristructural isotropic (TRISO) fuel for 369.1 effective full-power days (EFPDs) during approximately 2.4 calendar years. The AGR 3/4 data, including the irradiation data and calculated results, were qualified and stored in the Nuclear Data Management and Analysis System (NDMAS). To support the U.S. TRISO fuel performance assessment and to provide data for validation of fuel performance and fission product transport models and codes, the daily as run thermal analysis has been performed separately on each of twelve AGR 3/4 capsules for the entire irradiation as discussed in ECAR-2807, “AGR 3/4 Daily As Run Thermal Analyses”. The ABAQUS code’s finite element-based thermal model predicts the daily average volume average (VA) fuel temperature (FT), peak FT, and graphite matrix, sleeve, and sink temperature in each capsule. The JMOCUP simulation codes were also created to perform depletion calculations for the AGR 3/4 experiment (ECAR-2753, “JMOCUP As-Run Daily Physics Depletion Calculation for the AGR 3/4 TRISO Particle Experiment in ATR Northeast Flux Trap”). This depletion analysis provides fast fluence and fission heat rate data for all components (fuel compacts, graphite rings, stainless steel retainer, etc.), which are used as inputs for the thermal analysis codes. The graphite temperatures from thermocouples (TCs) in each capsule were used to calibrate these thermal analysis codes. However, given the high rate of TC failure under the harsh irradiation and thermal conditions in the AGR capsules, the thermal analysis results are very useful in aiding TC data qualification, increasing the confidence in delineating failures of the measuring instruments (TCs) from physical mechanisms that may have shifted the system thermal response.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Respirator Decision Flow Chartfor NA-84 Radiological Emergency Response Operations

This document is intended to provide a simple logic flow chart to assist NNSA NA-84 First Response Teams (RAP, CM, ARG, JTOT) in making quick field respiratory protection decisions for airborne radioactive contamination based primarily on loose surface contamination measurements in the first few hours or days following a radiological release. As a rule of thumb, respirators would not be required in the early phase of emergency response activities unless an alpha/beta contamination monitoring probe reads “off scale”. A defined set of assumptions and a clear basis for these assumptions can allow a simple logic flow chart for use by a radiological emergency response team with defined measurement instrumentation and known efficiencies. This document is intended for the radiological emergency field responder. A training level of NNSA Radiation Worker 2 with Air Purification Respirator (APR) training is assumed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Non-Destructive Testing of Water in PV Modules, CRADA TC02255

This was a collaborative effort between LLNS, as manager and operator of Lawrence Livermore National Laboratory ("LLNL"), and DNV GL PVEL, LLC, through its wholly-owned subsidiary of KEMA, USA, Inc., operating as a wholly-owned subsidiary of KEMA N.V., Arnhem, Netherlands, a Dutch company, which is a wholly-owned subsidiary of DNV GL, HØvik, Norway, a Norwegian company ("Participant"), to test a water measurement instrumentation developed by LLNL in support of a DOE-funded award.

47 OTHER INSTRUMENTATION↗

Cooperative Research and Development Agreement (CRADA) NFE-18-07194 with TerraPower LLC (Final Report)

Because of the potential economic and safety benefits of the molten salt reactor (MSR) concept, development of several designs has been initiated around the world over the past decade. New international nuclear safeguards needs and verification challenges are likely to arise because of the commercial interests in MSRs and the number of MSR design variants. As a result, work was undertaken to explore the cross-cutting issues specific to the application of international nuclear safeguards (i.e., safeguards) to liquid-fueled molten salt reactors (LFMSRs). Through a public-private partnership, a report was developed that focuses on the TerraPower Molten Chloride Fast Reactor (MCFR) design that has received a funding award from the US Department of Energy (DOE), Office of Nuclear Energy. The report is intended to provide a preliminary analysis for a safeguards-by-design (SBD) effort to inform designers about how safeguards could be applied to LFMSRs by the International Atomic Energy Agency (IAEA).Although the report specifically focuses on the TerraPower design, the conclusions are applicable to the main design features of LFMSRs and can be used to extrapolate how existing IAEA safeguards measures for other fuel cycle facilities can be appropriately applied or modified. The report evaluates the appropriate safeguards approaches for LFMSRs, presents existing safeguards inspection technologies are still valid for LFMSRs, and identifies new challenges that will require novel measurement instruments to meet verification standards of the IAEA and the international safeguards regime. This document summarizes the results of the work performed under the full report developed as part of the Cooperative Research and Development Agreement (CRADA). This summary does not contain any protected CRADA information and is intended for public release.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

June 2022 Permeability Measurements in P-Tunnel, Nevada National Security Site

This document describes gas permeability measurements made in June 2022 in P-Tunnel at the Nevada National Security Site (NNSS). Four boreholes (AC-1, GI-5, GI-6, and HF-1) were tested with a dual packer system. The pressure versus flow rate data that were collected are analyzed using a numerical simulation method that captures compressible gas flow in partially saturated porous media using a close approximation to the geometry of the test setup. The first part of this document begins with data collection and a description of the packer assembly followed by details on data acquisition, measurement instrumentation, and equipment followed by a description of pre-test system verification. Next, the implementation of testing in the field is described, including how specific locations were chosen for testing. The second part of this document describes the numerical simulations used to back-out permeability from the pressure versus flow rate data. First, the numerical model is described, including assumptions. Next the details of the mesh that represents the experiment are described. A method for generating type curves in pressure versus flow rate space is presented and finally the data are mapped to permeability. We conclude with a discussion of the results.

54 ENVIRONMENTAL SCIENCES↗

Micro-Quantification of Helium-3 and Helium-4 in TPBAR Components

This report documents the method development for measuring helium isotopes in micrometer-sized samples of tritium producing burnable absorption rod (TPBAR) components. Helium isotopes were measured as a tracer for tritium, which decays to 3 He with a half-life of 12.33 years. Getter and cladding materials from the TPBARs were analyzed, as they are designed to trap tritium. Therefore, constraining the diffusivity of tritium through these materials is of key importance. To first establish the reliability of the noble gas mass spectrometer, a reference gas with a relative 4 He/ 3 He ratio of 1000 was pre-mixed. This standard was measured several times to ensure measurements were reproducible. Unirradiated and irradiated getter and cladding samples of TPBARs were cut into 1-100 µm 3 cubes and analyzed for 3 He and 4 He content. The unirradiated materials had helium content equal to or less than that of the measured instrument background. Irradiated cladding also had instrument background levels of helium while irradiated getters had elevated levels of 3 He, interpreted to be the decay product of tritium. No diffusion of 4 He was observed in any of these materials, however, indicating that the 3 He detected in the irradiated getter was produced in situ after tritium diffusion and decay. These findings validate this method as a way to trace tritium diffusion in reactor materials.

07 ISOTOPE AND RADIATION SOURCES↗

Determination and optimization of spatial samples for distributed measurements.

There are no accepted standards for determining how many measurements to take during part inspection or where to take them, or for assessing confidence in the evaluation of acceptance based on these measurements. The goal of this work was to develop a standard method for determining the number of measurements, together with the spatial distribution of measurements and the associated risks for false acceptance and false rejection. Two paths have been taken to create a standard method for selecting sampling points. A wavelet-based model has been developed to select measurement points and to determine confidence in the measurement after the points are taken. An adaptive sampling strategy has been studied to determine implementation feasibility on commercial measurement equipment. Results using both real and simulated data are presented for each of the paths.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Visualizing Solution Structure at Solid-Liquid Interfaces using Three-Dimensional Fast Force Mapping

Amongst the challenges for a variety of research fields are the visualization of solid-liquid interfaces and understanding how they are affected by the solution conditions such as ion concentrations, pH, ligands, and trace additives, as well as the underlying crystallography and chemistry. Here, in this context, three-dimensional fast force mapping (3D FFM) has emerged as a promising tool for investigating solution structure at interfaces. This capability is based on atomic force microscopy (AFM) and allows the direct visualization of interfacial regions in three spatial dimensions with sub-nanometer resolution. Here we provide a detailed description of the experimental protocol for acquiring 3D FFM data. The main considerations for optimizing the operating parameters depending on the sample and application are discussed. Moreover, the basic methods for data processing and analysis are discussed, including the transformation of the measured instrument observables into tip-sample force maps that can be linked to the local solution structure. Finally, we shed light on some of the outstanding questions related to 3D FFM data interpretation and how this technique can become a central tool in the repertoire of surface science.

Nakouzi, Elias↗

In-Situ Monitoring of Trace Gases in a Non-Urban Environment

A set of commercial instruments measuring carbon monoxide (CO), ozone (O 3 ), sulfur dioxide (SO 2 ), and nitrogen oxides [nitric oxide (NO), nitrogen dioxide (NO 2 ), and odd nitrogens (NO X )] was integrated and deployed in a non–urban environment. The deployment occurred between July 2, 2007 and August 7, 2007 in Richland, WA. The mixing ratios of all species were lower than in most rural–suburban environments, and strong diurnal patterns were observed. NO 2 was depleted by photochemically formed ozone during the day and replenished at night as ozone was destroyed. The highest ozone concentration during these episodes was 45 ppb. The overall average was 15 ppb with readings approaching near zero at times. This observation is low compared to average daytime summer readings of 60–80 ppb in highly populated and industrialized urban areas in the Pacific Northwest region. Back-trajectory analysis and prevailing weather conditions both indicated that much of the ozone was transported locally or was produced in–situ. Analysis of SO 2 as a tracer for O 3 advection further indicated lack of long–range regional transport of pollutants to Richland. We also present results of analysis of high ozone episodes and comparisons relative to other areas in the Pacific Northwest region. These results provide a useful sample data set to study the historical record of air quality in rural Eastern Washington.

54 ENVIRONMENTAL SCIENCES↗

Solar Resource Measurements in Eugene, OR: Cooperative Research and Development Final Report, CRADA Number CRD-07-00252

Site-specific, long-term, continuous, and high-resolution measurements of solar irradiance are important for developing renewable resource data. These data are used for several research and development activities consistent with the NLR mission: establish a national 3-year climatological database of measured solar irradiances; provide high quality ground-truth data for satellite remote sensing validation; support development of radiative transfer models for estimating solar irradiance from available meteorological observations; provide solar resource information needed for technology deployment and operations. Data acquired under this agreement will be available to the public through NLR's Measurement & Instrumentation Data Center – MIDC (http://www.nlr.gov/midc) Or the Renewable Resource Data Center - RReDC (http://rredc.nlr.gov). The MIDC offers a variety of standard data display, access, and analysis tools designed to address the needs of a wide user audience (e.g., industry, academia, and government interests).

14 SOLAR ENERGY↗

Global Aspects of the Exploration of Space

The interest of man in outer space began long ago among uncivilized peoples to whom the face of the sky was clock and almanac; the celestial bodies, objects of worship. Exploration was at first by visual observation, later aided by armillary spheres and quadrants, and still later by more precise measuring instruments, telescopes, and spectroscopes. The information obtained was that borne by the light that was transmitted from the distant celestial object through the atmosphere to the observing instrument on the ground. In recent years the light waves have been supplemented by radio waves as carriers of information from the stars and planets. Men of many nations have contributed through the centuries to the exploration of space by the methods of astronomy. The history of advances in astronomical knowledge and technique includes the records of Chinese, Babylonians, Greeks, Arabians, and of nearly every nation of the modern world. International cooperation was early recognized as essential and beneficial; the countless number of the stars and the vastness of space present mankind with a truly global task. The picture of the universe obtained by the astronomers early stirred the imagination of men to speculate about the existence of life elsewhere in the universe, about means of communication with distant stars, and in the last centuries about the possibility of the travel of man to the moon and planets. Some sought to apply the science and engineering of their day to describe the vehicles to be used. For example, Jules Verne published in 1865 in "From the Earth to the Moon" a description of a gun-launched projectile carrying passengers to orbit the moon. Today we have taken the first steps to bring this inspired vision to reality. The exploration of space by unmanned vehicles carrying scientific apparatus began on October 4, 1957; exploration by man will follow in due course.

Dryden, Hugh L.↗

Special mount improves remote transducer accuracy

Transducer-mounting device allows measurement of transient pressure in a hostile environment. The device provides free passage areas and a controlled environment for the measuring instrument.

Layton, J. P.↗