Search NASA⌕ Search

SEARCH · Search NASA

Results for “Methods and Validation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Combinatorial Labeling Method for Improving Peptide Fragmentation in Mass Spectrometry

Annotation of peptide sequence from tandem mass spectra constitutes the central step of mass spectrometry-based proteomics. Peptide mass spectra are obtained upon gas-phase fragmentation. Identification of the protein from a set of experimental peptide spectral matches is usually referred as protein inference. Occurrence and intensity of these fragment ions in the MS/MS spectra are dependent on many factors such as amino acid composition, peptide basicity, activation mode, protease, etc. Particularly, chemical derivatizations of peptides were known to alter their fragmentation. In this study, the influence of acetylation, guanidinylation, and their combination on peptide fragmentation was assessed initially on a lipase (LipA) from Bacillus subtilis followed by a bovine six protein mix digest. The dual modification resulted in improved fragment ion occurrence and intensity changes, and this resulted in the equivalent representation of b- and y-type fragment ions in an ion trap MS/MS spectrum. The improved representation has allowed us to accurately annotate the peptide sequences de novo. Dual labeling has significantly reduced the false positive protein identifications in standard bovine six peptide digest. Our study suggests that the combinatorial labeling of peptides is a useful method to validate protein identifications for high confidence protein inference. .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transforming a Simple Structure Model to Represent a Complex Dynamic System with Unknown Boundary Restraints

Imposing a boundary condition on a structure can significantly alter its dynamic properties. However, sometimes the specifics of the new boundary conditions are not known. When the effects of a boundary condition are uncertain or there is not enough information, engineers need to excite the complex structure to obtain these modified properties. In order to experimentally obtain the new properties, engineers need multiple experiments and many outputs for interpolation in order to sufficiently represent the entire structure. In this study, the researchers attached a stinger to a cantilever beam, acting as a new transverse restraint of unknown properties. This paper presents a conversion expression that predicts the dynamic behavior of any point in the system with the new boundary condition. This expression relies only on one impact hammer experiment with one output and the model of the stinger-free cantilever beam, referred to as the simple structure. Researchers estimated the Transfer Function (TRF) of the beam and compared it with an experimentally measured TRF to validate the method. The mean absolute error of the estimated TRF compared to the experimental TRF is 1.99 dB. This demonstrates the use of the proposed method for estimating unmeasured TRFs in a system with an uncertain boundary condition using a single input, single output (SISO) test and a model of the simple structure.

42 ENGINEERING↗

Removal of inorganic mercury by selective extraction and coprecipitation for determination of methylmercury in mercury-contaminated soils by chemical vapor generation inductively coupled plasma mass spectrometry (CVG-ICP-MS)

A procedure is developed for selective extraction of methylmercury (CH 3 Hg + ) from heavily Hg-contaminated soils and sediments for determination by chemical vapor generation inductively coupled plasma mass spectrometry (CVG-ICP-MS). Soils artificially contaminated with 40 μg g –1 inorganic mercury (Hg 2+ ) or methylmercury chloride (CH 3 HgCl) were agitated by shaking or exposing to ultrasounds in dilute hydrochloric acid (HCl) or nitric acid (HNO 3 ) solutions at room temperature. Extractions in HCl (5 or 10% v/v) resulted in substantial leaching of Hg 2+ from soils, whereas 5% (v/v) HNO 3 provided selectivity for quantitative extraction of CH 3 Hg + with minimum Hg 2+ leaching. Agitation with ultrasounds in 5% (v/v) HNO 3 for about 3 min was sufficient for extraction of all CH 3 Hg + from soils. Coprecipitations with Fe(OH) 3 , Bi(OH) 3 and HgS were investigated for removal of residual Hg 2+ in soil extracts. Hydroxide precipitations were not effective. Thiourea or l-cysteine added to soil extracts prior to hydroxide precipitation improved precipitation of Hg 2+ , but also resulted in removal of CH 3 Hg + . HgS precipitation was made with dilute ammonium sulfide solution, (NH 4 ) 2 S. Adding 30 μL of 0.35 mol L –1 (NH 4 ) 2 S to soil extracts in 5% (v/v) HNO 3 resulted in removal of all residual Hg 2+ without impacting CH 3 Hg + levels. Vapor generation was carried out by reacting Hg 2+ -free soil extracts with 1% (m/v) NaBH 4 . No significant interferences were observed from (NH 4 ) 2 S on the vapor generation from CH 3 Hg + . The slopes of the calibration curves for CH 3 HgCl standard solutions in 5% (v/v) HNO 3 with and without (NH 4 ) 2 S were similar. Limits of detection (LOD, 3s method) were around 0.08 μg L –1 for 5% (v/v) HNO 3 blanks (n = 10) and 0.10 μg L –1 for 5% (v/v) HNO 3 + 0.005 mol L –1 (NH 4 ) 2 S blanks (n = 10). Percent relative standard deviation (%RSD) for five replicate measurements varied between 3.1% and 6.4% at 1.0 CH 3 HgCl level. The method is validated by analysis of two certified reference materials (CRM); purely Methylmercury sediment (SQC1238, 10.00 ± 0.291 ng g –1 CH 3 Hg + ) and Hg-contaminated Estuarine sediment (ERM – CC580, 75 ± 4 ng g–1 CH 3 Hg + and 132 ± 3 μg g –1 total Hg). CH 3 Hg + values for SQC1238 were between 13.0 and 13.2 ng g –1 , and 79 and 81 ng g –1 for ERM – CC580. Hg-contaminated soils (57–96 μg g –1 total Hg) collected from the floodplains of Oak Ridge, TN were analyzed for CH 3 Hg + using the procedure by CVG-ICPMS. CH 3 Hg + levels ranged from 30 to 51 ng g –1 and did not correlate with total Hg levels (R 2 = 0.01).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Calcium fluoride as a dominating matrix for quantitative analysis by laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS): A feasibility study

Here, calcium fluoride formed by the reaction between ammonium bifluoride and calcium chloride was investigated as a dominating matrix for quantitative analysis by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). Transformation from a solid sample to the calcium fluoride-based matrix permitted quantitative analysis based on calibration standards made from elemental standards. A low abundance stable calcium isotope, i.e. 44 Ca + , was monitored as the internal standard for quantitative analysis by LA-ICP-MS. Correlation coefficient factors for multiple elements were obtained with values over 0.999. The results for multiple elements in a certified reference material of soil (NIST SRM 2710a) agreed with the certified values in the range of expanded uncertainty, indicating the present method was valid for quantitation of elements in solid samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Hybrid Domain Overlapping Method for Coupling System Thermal Hydraulics and CFD Codes

A hybrid multiscale coupling methodology based on a domain overlapping approach has been developed for coupling System Thermal Hydraulics (STH) and Computational Fluid Dynamics (CFD) codes. The method has been implemented between the modern STH code SAM and the CFD code NekRS, using the coupling tool Cardinal. The coupling aims to extend the STH code's applicability to scenarios where local momentum and energy transfers are important yet difficult for STH codes to capture, such as three-dimensional mixing. Two coupling strategies are implemented and compared: a hybrid domain overlapping method and the conventional domain decomposition method. Here, the strategies are applied to two closed-loop applications, and the present method shows superior stability behavior when compared to the domain decomposition method. Then, the present coupling method is validated against experimental data from a double T-junction experiment. The present STH/CFD coupling shows improved agreement with experimental data when compared to STH standalone simulations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Residual service life of carbonated structures based on site non-destructive tests

Assessing the residual service life of carbonated reinforced concrete structures is typically conducted by measuring cover depths and carbonation of drilled cores, assuming the ''square root law'' for the progress of the carbonation front. Given the large spatial variability of carbonation depths, the required number of cores becomes prohibitive. A model is presented, based on numerous experimental data, by which the carbonation rate can be estimated by means of non-destructive site measurements of the air-permeability kT. A Weibull distribution of the carbonation rate K{sub c} is fitted to the results, which is a function of kT. Hence, for each kT value measured on site coupled with the cover depth x{sub d}, expected, optimistic and pessimistic values of the corrosion initiation time can be obtained without the need of drilling cores. The method is validated on 111 paired results of kT and x{sub d}, obtained on the emblematic Tokyo's Museum of Western Art.

36 MATERIALS SCIENCE↗

Influence of sizing concentration on strength, stiffness, and porosity in textile grade carbon fiber (TCF)-Epoxy composites: Revealing inverse trends

The effect of fiber sizing (i.e., surface treatment) concentration (0 %, 1.36 %, 1.52 %, 1.94 %, and 2.13 %) on the mechanical properties (tensile, flexural, interlaminar shear strength (ILSS), and low velocity impact) of textile grade carbon fiber (TCF)-epoxy composite is examined. An inverse relationship between the strength and stiffness of the composite is observed with increased sizing concentration. The root mean square (RMS) roughness of the fiber surface increased from 17.8 nm (unsized) to 22.7 nm with 2.13 % sizing concentration. It was found that the tensile strength increased by 131 % from 221.4 ± 18.5 MPa (unsized) to 510.8 ± 28.05 MPa (for 1.36 % sizing) and further by 155 %–563.7 ± 14.95 MPa at 2.13 % sizing. On the contrary, the stiffness is initially increased by 126 % from 33.52 ± 7.80 GPa (unsized) to 75.9 ± 3.21 GPa (for 1.36 % sizing) but reduced with further increase in the sizing concentration. A single fiber pull-out test is simulated using the finite element method to validate the reverse trend in strength and stiffness. The varying sizing concentration is simulated by introducing an interface of varying thickness between fibers and matrix. Simulation results confirm that a thicker interface, corresponding to a higher sizing concentration, decreases interfacial shear stress, enhancing material strength while decreasing stiffness. The reverse trend in strength and stiffness with the sizing concentration aligns with experimental observations. In conclusion, the present study emphasizes the importance of sizing concentration for mechanical properties and provide a design criterion for customized high-strength and high-stiffness applications.

Porosity↗

A comprehensive modeling procedure for estimating statistical properties of forced ignition

In this work, a comprehensive modeling procedure for estimating the probability of ignition with application to high altitude relights of aircraft combustors is developed. In these configurations, an ignitor is used to introduce high-enthalpy discharge into a fuel-laden but stratified flow. Because of the inherent variabilities inflow conditions, kernel discharge process, and the chaotic turbulent flow, ignition cannot be described deterministically, but only as a probabilistic measure. The proposed modeling framework consists of three components. The turbulent flow is represented using the large eddy simulation (LES) framework. The ignition process is modeled using a manifold approach, where the initial kernel evolution is represented using a homogeneous reactor while the latter part of the evolution is represented as a competition between diffusion and chemical reactions using a flamelet-type mapping. A combined lookup table that can track the evolution of the kernel through these two distinct reaction stages is developed. The table lookup variables are solved within the LES framework. The resulting simulation tool is then embedded within an uncertainty quantification approach, where variations in the turbulent flow, as well as operating and kernel properties, are simulated using a Monte-Carlo-based sampling approach. Techniques to reduce computational cost are used to obtain a robust, numerically accurate, and physically representative model for engine relight. The method is validated using experimental data for ignition of methane/air mixtures. Due to the comprehensive nature of the modeling procedure, it is found that the simulation tool reproduces experimentally observed ignition probabilities over a wide range of operating conditions.

42 ENGINEERING↗

A sharp interface model for deterministic simulation of dendrite growth

A high order level set model is developed for deterministic simulation of dendritic growth in unstable solidifying systems. The model captures motion of the front implicitly on a structured finite difference grid, enables calculation of its geometric properties and also applies boundary conditions on the immersed interface. Interfacial capillary effect is incorporated in the model through the Gibbs-Thomson condition. Canonical problems for evaluating grid convergence of the numerical method and validation tests for stability of a growing nucleus in the presence of isotropic surface tension are presented. The growth morphology of solidifying nuclei in undercooled metallic melts is quantitatively analyzed. Effects of crystal anisotropy and melt undercooling on the front geometry, propagation speed and formation of branched dendritic structures are examined. In conclusion, the complex morphological changes, such as remelting of secondary perturbations under specific conditions of undercooling, are also captured during the quantitative analysis.

36 MATERIALS SCIENCE↗

RLGBS: Reinforcement Learning-Guided Beam Search for process optimization in a paper machine dryer section

Paper drying is responsible for over two-thirds of energy consumption in the U.S. pulp and paper industry, presenting significant potential for energy savings through optimization of process parameters. Current approaches often assume fixed operating conditions, neglecting dynamic ambient and process variations that limit achievable savings and real-world applicability. To this end, we develop a physics-based simulation environment for a paper machine dryer section and propose a reinforcement learning (RL) framework to minimize overall energy consumption by optimizing drying process parameters under diverse operating conditions. To mitigate overdrying and numerical instabilities caused by suboptimal local RL actions, we introduce Reinforcement Learning-Guided Beam Search (RLGBS), which explores multiple action sequences in parallel using beam search. Instead of making step-by-step decisions, RLGBS prioritizes solutions based on cumulative probability, reducing the impact of individual suboptimal actions. Experiments demonstrate that RLGBS achieves consistent energy savings under unseen operating conditions not encountered during training, outperforming conventional RL methods. While validated in drying optimization, this framework is broadly applicable to other RL-based industrial process control problems.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Validation of process simulation workflow for thermosetting prepreg platelet molding compounds

Continuous carbon fiber prepreg slit and cut into rectangular platelets has proven to be a useful material for net shape molding of semi-structural and structural components in the aerospace and automotive industries. Furthermore, to assist the designer in use of these prepreg platelet molding compounds, sometimes called carbon fiber sheet molding compounds, simulation tools are required that can predict the as-manufactured fiber orientation state which has a significant impact on the resulting performance. Herein, an analysis workflow for design-enabling predictions is demonstrated for a double dome geometry with two different initial charge configurations. Here, the workflow is validated through comparison with experimental short shots, orientation state, and stiffness trends. Significantly, to complete the validation, a method is proposed for determining the confidence bounds on measured orientation state enhancing the results of optical microscopy which can only produce a small sample of platelet orientations.

36 MATERIALS SCIENCE↗

Designing a drone delivery network with automated battery swapping machines

Drones are projected to alter last-mile delivery, but their short travel range is a concern. In this study, we propose a drone delivery network design using automated battery swapping machines (ABSMs) to extend ranges. The design minimizes the long-term delivery costs, including ABSM investment, drone ownership, and cost of the delivery time, and locates ABSMs to serve a set of customers. We build a mixed-integer nonlinear program that captures the nonlinear waiting time of drones at ABSMs. To solve the problem, we create an exact solution algorithm that finds the globally optimal solution using a derivative-supported cutting-plane method. To validate the applicability of our program, we conduct a case study on the Chicago Metropolitan area using cost data from leading ABSM manufacturer and geographical data from the planning and operations language for agent-based regional integrated simulation (more commonly known as POLARIS). A sensitivity analysis identifies that ABSM service times and costs are the key parameters impacting the long-term adoption of drone delivery.

25 ENERGY STORAGE↗

Effects of non-homogeneous flow on ADCP data processing in a hydroturbine forebay

Observations of the flow conditions in the forebay of a hydroelectric power station indicate significant regions of non-homogeneous velocities near the intakes and shoreline. The effect of these non-homogeneous regions on the velocity measurement of an acoustic Doppler current profiler (ADCP) is investigated. By using a numerical model of an ADCP operating in a velocity field calculated using computational fluid dynamics (CFD), the errors due to the spatial variation of the flow velocity are identified. The numerical model of the ADCP is referred to herein as a Virtual ADCP (VADCP). Two scenarios are modeled in the numerical analyses presented. Firstly the measurement error of the VADCP is calculated for a single instrument adjacent to the short converging intake of the powerhouse. Secondly, the flow discharge through the forebay is estimated from a transect of VADCP instruments at dif- ferent distances from the powerhouse. The influence of instrument location and orientation are investigated for both cases. A velocity error of over up to 94% of the reference velocity is calculated for a VADCP modeled adjacent to an operating intake. Qualitative agreement is observed between the calculated VADCP velocities and reference velocities by an offset of one intake height upstream of the powerhouse.

13 HYDRO ENERGY↗

Specifying angular reference for robust three-phase state estimation

While the phase angle of any of the bus voltages can be chosen as the angular reference in the state estimation formulation of positive sequence networks, the same approach does not readily extend to three-phase network state estimation problem. It is commonly assumed that there is at least one bus where the bus voltages are perfectly balanced with phase angles displaced ±120° and these balanced three phase voltages are used as the three-phase reference in solving the three-phase state estimation problem. This assumption may be quite realistic in transmission networks, and for distribution networks with a strong transmission system connection. However, it might not be realistic to assume existence of a perfectly balanced reference bus in today’s distribution systems with ever increasing penetration of renewable sources or for isolated operation of microgrids. In this paper, a novel state estimation formulation will be presented which facilitates correct solution irrespective of the existence of buses with perfectly balanced voltages. The new formulation is general, and lends itself to bad data processing. It yields accurate results in any three-phase power system irrespective of its operating conditions (balanced or highly unbalanced), configuration (isolated microgrid, connected to transmission system, etc.) and whether or not it contains any synchronous generators. The performance of the method is validated using the IEEE 123 bus three-phase system.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Numerical simulations of a horizontal axis water turbine designed for underwater mooring platforms

In order to extend the operational life of Underwater Moored Platforms (UMPs), a horizontal axis water turbine is designed to supply energy for the UMPs. The turbine, equipped with controllable blades, can be opened to generate power and charge the UMPs in moored state. Three-dimensional Computational Fluid Dynamics (CFD) simulations are performed to study the characteristics of power, thrust and the wake of the turbine. Particularly, the effect of the installation position of the turbine is considered. Simulations are based on the Reynolds Averaged Navier-Stokes (RANS) equations and the shear stress transport k-ω turbulent model is utilized. The numerical method is validated using existing experimental data. The simulation results show that this turbine has a maximum power coefficient of 0.327 when the turbine is installed near the tail of the UMP. The flow structure near the blade and in the wake are also discussed.

13 HYDRO ENERGY↗

A hierarchical gray-box dynamic modeling methodology for direct-expansion cooling systems to support control stability analysis; Méthodologie de modélisation dynamique hiérarchique de type boîte grise pour les systèmes de refroidissement à détente directe afin de soutenir l'analyse de stabilité de la commande

In this paper, a gray-box dynamic modeling approach for direct-expansion cooling systems is presented. The overall approach incorporates a multi-stage training procedure that consists of 1) identification of component sub-models from quasi-steady-state performance data, 2) system model integration with estimation of refrigerant charge and 3) fine tuning of thermal capacitances of the evaporator and condenser to capture the system dynamic responses. Compared to traditional physics-based models, the proposed modeling approach has advantages including reduced engineering efforts in the model development phase, improved computational efficiency and enhanced prediction accuracy. The modeling method was validated using a 3-ton variable-speed heat pump and proved to be capable of accurately predicting the system transient behaviors over a wide range of operating conditions. The established dynamic model was then applied for control stability analysis, with a specific goal of determining a proper control execution time step. The case study results showed that the stable control execution time step could change significantly, from 3 sec to 19 sec, as the operating conditions and control settings vary, and a proper selection of the execution time step is critical to ensure stable and reliable operations.

42 ENGINEERING↗

In Search of the Economic Sustainability of Hadron Therapy: The Real Cost of Setting Up and Operating a Hadron Facility

Purpose: To determine the treatment cost and required reimbursement for a new hadron therapy facility, considering different technical solutions and financing methods. Methods and Materials: The 3 technical solutions analyzed are a carbon only (COC), proton only (POC), and combined (CC) center, each operating 2 treatment rooms and assumed to function at full capacity. A business model defines the required reimbursement and analyzes the financial implications of setting up a facility over time; activity-based costing (ABC) calculates the treatment costs per type of patient for a center in a steady state of operation. Both models compare a private, full-cost approach with public sponsoring, only taking into account operational costs. Results: Yearly operational costs range between €10.0M (M = million) for a publicly sponsored POC to €24.8M for a CC with private financing. Disregarding inflation, the average treatment cost calculated with ABC (COC: €29,450; POC: €46,342; CC: €46,443 for private financing; respectively €16,059, €28,296, and €23,956 for public sponsoring) is slightly lower than the required reimbursement based on the business model (between €51,200 in a privately funded POC and €18,400 in COC with public sponsoring). Reimbursement for privately financed centers is very sensitive to a delay in commissioning and to the interest rate. Higher throughput and hypofractionation have a positive impact on the treatment costs. Conclusions: Both calculation methods are valid and complementary. The financially most attractive option of a publicly sponsored COC should be balanced to the clinical necessities and the sociopolitical context.

62 RADIOLOGY AND NUCLEAR MEDICINE↗