Results for “Model Based Systems Engineering” — Page 42

NASA NTRS2011

Initial Assessment of Open Rotor Propulsion Applied to an Advanced Single-Aisle Aircraft

Application of high speed, advanced turboprops, or propfans, to subsonic transport aircraft received significant attention and research in the 1970s and 1980s when fuel efficiency was the driving focus of aeronautical research. Recent volatility in fuel prices and concern for aviation s environmental impact have renewed interest in unducted, open rotor propulsion, and revived research by NASA and a number of engine manufacturers. Unfortunately, in the two decades that have passed since open rotor concepts were thoroughly investigated, NASA has lost experience and expertise in this technology area. This paper describes initial efforts to re-establish NASA s capability to assess aircraft designs with open rotor propulsion. Specifically, methodologies for aircraft-level sizing, performance analysis, and system-level noise analysis are described. Propulsion modeling techniques have been described in a previous paper. Initial results from application of these methods to an advanced single-aisle aircraft using open rotor engines based on historical blade designs are presented. These results indicate open rotor engines have the potential to provide large reductions in fuel consumption and emissions. Initial noise analysis indicates that current noise regulations can be met with old blade designs and modern, noiseoptimized blade designs are expected to result in even lower noise levels. Although an initial capability has been established and initial results obtained, additional development work is necessary to make NASA s open rotor system analysis capability on par with existing turbofan analysis capabilities.

Guynn, Mark D.↗

NASA NTRS1993

Damage-mitigating control of space propulsion systems for high performance and extended life

Calculations are presented showing that a substantial improvement in service life of a reusable rocket engine can be achieved by an insignificant reduction in the system dynamic performance. The paper introduces the concept of damage mitigation and formulates a continuous-time model of fatigue damage dynamics. For control of complex mechanical systems, damage prediction and damage mitigation are carried out based on the available sensory and operational information such that the plant can be inexpensively maintained and safely and efficiently steered under diverse operating conditions. The results of simulation experiments are presented for transient operations of a reusable rocket engine.

Ray, Asok↗

NASA NTRSDate not supplied

A Simulation Architecture for Air Traffic Over Urban Environments Supporting Autonomy Research in Advanced Air Mobility

As part of its research, NASA investigates concepts, aircraft, and operations related to Advanced Air Mobility (AAM). One of the most challenging scenarios for AAM will be enabling safe routine access near densely populated urban centers. AAM flight operations over a regional area require a moderately high-fidelity simulation capability to develop and evaluate autonomy technologies in the urban environment. This paper aims to describe a system to simulate flight operations around regions such as the San Francisco-Oakland Bay area at a moderately-high scale (tens to hundreds of flights) that incorporates detailed vehicle models and control necessary to support research in airborne autonomy. The flight vehicle utilizes NASA AAM concept vehicle dynamics integrated with a custom flight management system and flight control system to simulate all flight phases accurately. The simulation incorporates a detailed simulated urban environment and includes glass cockpit displays to monitor aircraft operations. Simulation models integrate to simulate air and ground-based sensors, such as Radar and LiDAR. As a commercially available rendering engine, X-Plane 11 is used as the renderer to simulate vision-based sensors (such as onboard and ground-based cameras) with a detailed graphical model of a city at different times of the day and weather conditions. This paper presents the simulation and software architecture used for simulating AAM traffic over this urban region. This system enables the evaluation of NASA research concepts in autonomy for urban AAM operations on the path toward flight test evaluation.

distributed sensing↗

NASA NTRSDate not supplied

A Simulation Architecture for Air Traffic Over Urban Environments Supporting Autonomy Research in Advanced Air Mobility

As part of its research, NASA investigates concepts, aircraft, and operations related to Advanced Air Mobility (AAM). One of the most challenging scenarios for AAM will be enabling safe routine access near densely populated urban centers. AAM flight operations over a regional area require a moderately high-fidelity simulation capability to develop and evaluate autonomy technologies in the urban environment. This paper aims to describe a system to simulate flight operations around regions such as the San Francisco-Oakland Bay area at a moderately-high scale (tens to hundreds of flights) that incorporates detailed vehicle models and control necessary to support research in airborne autonomy. The flight vehicle utilizes NASA AAM concept vehicle dynamics integrated with a custom flight management system and flight control system to simulate all flight phases accurately. The simulation incorporates a detailed simulated urban environment and includes glass cockpit displays to monitor aircraft operations. Simulation models integrate to simulate air and ground-based sensors, such as Radar and LiDAR. As a commercially available rendering engine, X-Plane 11 is used as the renderer to simulate vision-based sensors (such as onboard and ground-based cameras) with a detailed graphical model of a city at different times of the day and weather conditions. This paper presents the simulation and software architecture used for simulating AAM traffic over this urban region. This system enables the evaluation of NASA research concepts in autonomy for urban AAM operations on the path toward flight test evaluation.

Distributed sensing↗

NASA NTRS2020

Demonstrating Assurance of Model-Based Fault Diagnosis Systems on an Operational Mission

Developers of robotic scientific and commercial spacecraft are trending towards use of onboard autonomous capabilities for responding quickly to dynamic environments and rapidly changing situations. These capabilities need to know the state of the spacecraft’s health. Model-based fault diagnosis (MBFD) is an approach to estimating health by continuously verifying accurate behavior and diagnosing off-nominal behavior. Proper functioning of MBFD depends on 1) the quality of the diagnostic system model that is analyzed and compared to commands and onboard measurements to estimate a system’s health state, and 2) the correct functionality of the diagnosis engine interrogating the model and comparing its analyses to observed system behavior. Our goal is to develop Verification and Validation (V&V) techniques for MBFD to provide future missions sufficient confidence in its functionality and performance to deploy it on the systems they develop. Our work has been focused on infusing the techniques we developed earlier to an operational mission. First, we are constructing diagnostic models of a spacecraft attitude control system and updating our diagnostic engine so they can be demonstrated aboard the Arcsecond Space Telescope Enabling Research in Astrophysics (ASTERIA) mission, an operational spacecraft for which experiments in autonomy are being planned and executed, using the V&V techniques we have previously developed to assure they are both correct and complete. Since it is nearing the end of its life, ASTERIA provides a unique opportunity to demonstrate MBFD since the monitored components are expected to fail. Our demonstration will give system developers additional confidence to make timely, informed MBFD deployment decisions. Second, we will be completing performance assessments of the diagnostic engine/diagnostic model ensemble both on the flight system and ground-based testbeds to gain confidence in MBFD’s ability to run successfully in a spacecraft’s resource-constrained environment without adversely affecting other on-board activities. Finally, we are capturing our experience in preparing this demonstration in a set of checklists and guidance documents. Current practice includes high-level institutional guidance documents and standards, but at a high level of abstraction that does not necessarily address specific MBFD concerns. The purpose of the new checklists is to provide future mission developers clear, unambiguous, procedure-oriented guidance on assuring MBFD. This paper describes our work in these areas. For the first area, we describe the diagnostic models and updated diagnostic engine that will be used for the on-board demonstration. We describe how the V&V techniques we developed earlier are used to assure model and engine correctness and completeness. For the second area, we identify the performance measurement and assessment techniques used to characterize the diagnostic engine and diagnostic models, and discuss the effect of measured performance on overall mission operation. Finally, we present the checklist and guidance documents and describe how they meet the goals of providing system developers with clear, unambiguous, procedure-oriented guidance on MBFD assurance. We show how the techniques we have developed map into those artifacts.

Nikora, Allen↗

NASA NTRS2017

Model-Based Thermal System Design Optimization for the James Webb Space Telescope

Spacecraft thermal model validation is normally performed by comparing model predictions with thermal test data and reducing their discrepancies to meet the mission requirements. Based on thermal engineering expertise, the model input parameters are adjusted to tune the model output response to the test data. The end result is not guaranteed to be the best solution in terms of reduced discrepancy and the process requires months to complete. A model-based methodology was developed to perform the validation process in a fully automated fashion and provide mathematical bases to the search for the optimal parameter set that minimizes the discrepancies between model and data. The methodology was successfully applied to several thermal subsystems of the James Webb Space Telescope (JWST). Global or quasiglobal optimal solutions were found and the total execution time of the model validation process was reduced to about two weeks. The model sensitivities to the parameters, which are required to solve the optimization problem, can be calculated automatically before the test begins and provide a library for sensitivity studies. This methodology represents a crucial commodity when testing complex, large-scale systems under time and budget constraints. Here, results for the JWST Core thermal system will be presented in detail.

Cataldo, Giuseppe↗

NASA NTRS1998

Efficient Third Harmonic Generation for Wind Lidar Applications

The characterization of atmospheric winds on a global basis is a key parameter required for accurate weather prediction. The use of a space based lidar system for remote measurement of wind speed would provide detailed and highly accurate data for future weather prediction models. This paper reports the demonstration of efficient third harmonic conversion of a 1 micrometer laser to provide an ultraviolet (UV) source suitable for a wind lidar system based on atmospheric molecular scattering. Although infrared based lidars using aerosol scattering have been demonstrated to provide accurate wind measurement, a UV based system using molecular or Rayleigh scattering will provide accurate global wind measurements, even in those areas of the atmosphere where the aerosol density is too low to yield good infrared backscatter signals. The overall objective of this work is to demonstrate the maturity of the laser technology and its suitability for a near term flight aboard the space shuttle. The laser source is based on diode-pumped solid-state laser technology which has been extensively demonstrated at TRW in a variety of programs and internal development efforts. The pump laser used for the third harmonic demonstration is a breadboard system, designated the Laser for Risk Reduction Experiments (LARRE), which has been operating regularly for over 5 years. The laser technology has been further refined in an engineering model designated as the Compact Advanced Pulsed Solid-State Laser (CAPSSL), in which the laser head was packaged into an 8 x 8 x 18 inch volume with a weight of approximately 61 pounds. The CAPSSL system is a ruggedized configuration suitable for typical military applications. The LARRE and CAPSSL systems are based on Nd:YAG with an output wavelength of 1064 nm. The current work proves the viability of converting the Nd:YAG fundamental to the third harmonic wavelength at 355 nm for use in a direct detection wind lidar based on atmospheric Rayleigh scattering.

Mordaunt, David W.↗

NASA NTRSDate not supplied

Harnessing the Digital Transformation for Development of Electrified Aircraft Propulsion Control Systems

Hybrid electric aircraft propulsion is an emerging technology that presents a variety of potential benefits along with technical integration challenges. Developing these new propulsion architectures with their complex control systems, and ultimately proving their benefit, is a multistep process that goes from concept, to analysis, to dynamic simulation, to hardware in the loop testing, to full scale testing and beyond. This effort is being revolutionized and indeed enabled by new digital tools that support the increasing technology readiness level throughout the maturation process. NASA has developed and made available a suite of digital tools that ease the path from concept to implementation. The three packages are the Toolbox for the Modeling and Analysis of Thermodynamic Systems (T-MATS), the Electrical Modeling and Thermal Analysis Toolbox (EMTAT), and the Thermal Systems Analysis Toolbox (TSAT). These tools are interactive, complementary, and compatible with each other. T-MATS is a modular thermodynamic modeling framework designed for creating custom component level models of jet engines. EMTAT is a modeling framework used to simulate a variety of power electronic devices, using both physics-based and power flow calculations. TSAT is a framework for modeling and analysis of dynamic heat transfer. These packages all consist of graphical, drag-and-drop, parameterizable building blocks representing various components of the system to be modeled, e.g., compressors, turbines, motors, energy storage devices, etc. They are designed to enable the user to model and simulate the end-to-end dynamic operation of a hybrid powertrain at the timescale of the turbomachinery, capturing mechanical, electrical, and thermal interactions. This paper will describe through multiple examples how these tools have been used successfully in several of the early stages of hybrid electric propulsion system development, from the initial system modeling to real-time interactive pilot-in-the-loop simulation to physical hardware-in-the-loop testing, each step bringing the technology closer to fruition.

Hybrid electric propulsion↗

NASA NTRSDate not supplied

Harnessing the Digital Transformation for Development of Hybrid Electric Aircraft Propulsion Control Systems

Hybrid electric aircraft propulsion is an emerging technology that presents a variety of potential benefits along with technical integration challenges. Developing these new propulsion architectures with their complex control systems, and ultimately proving their benefit, is a multistep process that goes from concept, to analysis, to dynamic simulation, to hardware in the loop testing, to full scale testing and beyond. This effort is being revolutionized and indeed enabled by new digital tools that support the increasing technology readiness level throughout the maturation process. NASA has developed and made available a suite of digital tools that ease the path from concept to implementation. The three packages are the Toolbox for the Modeling and Analysis of Thermodynamic Systems (T-MATS), the Electrical Modeling and Thermal Analysis Toolbox (EMTAT), and the Thermal Systems Analysis Toolbox (TSAT). These tools are interactive, complementary, and compatible with each other. T-MATS is a modular thermodynamic modeling framework designed for creating custom component level models of jet engines. EMTAT is a modeling framework used to simulate a variety of power electronic devices, using both physics-based and power flow calculations. TSAT is a framework for modeling and analysis of dynamic heat transfer. These packages all consist of graphical, drag-and-drop, parameterizable building blocks representing various components of the system to be modeled, e.g., compressors, turbines, motors, energy storage devices, etc. They are designed to enable the user to model and simulate the end-to-end dynamic operation of a hybrid powertrain at the timescale of the turbomachinery, capturing mechanical, electrical, and thermal interactions. This paper will describe through multiple examples how these tools have been used successfully in several of the early stages of hybrid electric propulsion system development, from the initial system modeling to real-time interactive pilot-in-the-loop simulation to physical hardware-in-the-loop testing, each step bringing the technology closer to fruition.

Electrified Propulsion↗

NASA NTRS2002

REACH: Real-Time Data Awareness in Multi-Spacecraft Missions

Missions have been proposed that will use multiple spacecraft to perform scientific or commercial tasks. Indeed, in the commercial world, some spacecraft constellations already exist. Aside from the technical challenges of constructing and flying these missions, there is also the financial challenge presented by the tradition model of the flight operations team (FOT) when it is applied to a constellation mission. Proposed constellation missions range in size from three spacecraft to more than 50. If the current ratio of three-to-five FOT personnel per spacecraft is maintained, the size of the FOT becomes cost prohibitive. The Advanced Architectures and Automation Branch at the Goddard Space Flight Center (GSFC Code 588) saw the potential to reduce the cost of these missions by creating new user interfaces to the ground system health-and-safety data. The goal is to enable a smaller FOT to remain aware and responsive to the increased amount of ground system information in a multi-spacecraft environment. Rather than abandon the tried and true, these interfaces were developed to run alongside existing ground system software to provide additional support to the FOT. These new user interfaces have been combined in a tool called REACH. REACH-the Real-time Evaluation and Analysis of Consolidated Health-is a software product that uses advanced visualization techniques to make spacecraft anomalies easy to spot, no matter how many spacecraft are in the constellation. REACH reads a real-time stream of data from the ground system and displays it to the FOT such that anomalies are easy to pick out and investigate. Data visualization has been used in ground system operations for many years. To provide a unique visualization tool, we developed a unique source of data to visualize: the REACH Health Model Engine. The Health Model Engine is rule-based software that receives real-time telemetry information and outputs "health" information related to the subsystems and spacecraft that the telemetry belong to. The Health Engine can run out-of-the-box or can be tailored with a scripting language. Out of the box, it uses limit violations to determine the health of subsystems and spacecraft; when tailored, it determines health using equations combining the values and limits of any telemetry in the spacecraft. The REACH visualizations then "roll up" the information from the Health Engine into high level, summary displays. These summary visualizations can be "zoomed" into for increasing levels of detail. Currently REACH is installed in the Small Explorer (SMEX) lab at GSFC, and is monitoring three of their five spacecraft. We are scheduled to install REACH in the Mid-sized Explorer (MIDEX) lab, which will allow us to monitor up to six more spacecraft. The process of installing and using our "research" software in an operational environment has provided many insights into which parts of REACH are a step forward and which of our ideas are missteps. Our paper explores both the new concepts in spacecraft health-and-safety visualization, the difficulties of such systems in the operational environment, and the cost and safety issues of multi-spacecraft missions.

Maks, Lori↗

NASA NTRS2014

Enhanced Fan Noise Modeling for Turbofan Engines

This report describes work by consultants to Diversitech Inc. for the NASA Glenn Research Center (GRC) to revise the fan noise prediction procedure based on fan noise data obtained in the 9- by 15 Foot Low-Speed Wind Tunnel at GRC. The purpose of this task is to begin development of an enhanced, analytical, more physics-based, fan noise prediction method applicable to commercial turbofan propulsion systems. The method is to be suitable for programming into a computational model for eventual incorporation into NASA's current aircraft system noise prediction computer codes. The scope of this task is in alignment with the mission of the Propulsion 21 research effort conducted by the coalition of NASA, state government, industry, and academia to develop aeropropulsion technologies. A model for fan noise prediction was developed based on measured noise levels for the R4 rotor with several outlet guide vane variations and three fan exhaust areas. The model predicts the complete fan noise spectrum, including broadband noise, tones, and for supersonic tip speeds, combination tones. Both spectra and directivity are predicted. Good agreement with data was achieved for all fan geometries. Comparisons with data from a second fan, the ADP fan, also showed good agreement.

aircraft↗

NASA NTRS2014

Interdisciplinary Interactions During R&D and Early Design of Large Engineered Systems

Designing Large-Scale Complex Engineered Systems (LaCES) such as aircraft and submarines requires the input of thousands of engineers and scientists whose work is proximate in neither time nor space. Comprehensive knowledge of the system is dispersed among specialists whose expertise is in typically one system component or discipline. This study examined the interactive work practices among such specialists seeking to improve engineering practice through a rigorous and theoretical understanding of current practice. This research explored current interdisciplinary practices and perspectives during R&D and early LaCES design and identified why these practices and perspectives prevail and persist. The research design consisted of a three-fold, integrative approach that combined an open-ended survey, semi-structured interviews, and ethnography. Significant empirical data from experienced engineers and scientists in a large engineering organization were obtained and integrated with theories from organization science and engineering. Qualitative analysis was used to obtain a holistic, contextualized understanding. The over-arching finding is that issues related to cognition, organization, and social interrelations mostly dominate interactions across disciplines. Engineering issues, such as the integration of hardware or physics-based models, are not as significant. For example, organization culture is an important underlying factor that guided researchers more toward individual sovereignty over cross-disciplinarity. The organization structure and the engineered system architecture also serve as constraints to the engineering work. Many differences in work practices were observed, including frequency and depth of interactions, definition or co-construction of requirements, clarity or creation of the system architecture, work group proximity, and cognitive challenges. Practitioners are often unaware of these differences resulting in confusion and incorrect assumptions regarding work expectations. Cognitively, the enactment and coconstruction of knowledge are the fundamental tasks of the interdisciplinary interactions. Distributed and collective cognition represent most of the efforts. Argument, ignorance, learning, and creativity are interrelated aspects of the interactions that cause discomfort but yield benefits such as problem mitigation, broader understanding, and improved system design and performance. The quality and quantity of social interrelations are central to all work across disciplines with reciprocity, respectful engagement, and heedful interrelations being significant to the effectiveness of the engineering and scientific work.

McGowan, Anna-Maria Rivas↗

NASA NTRS2012

Antenna Calibration and Measurement Equipment

A document describes the Antenna Calibration & Measurement Equipment (ACME) system that will provide the Deep Space Network (DSN) with instrumentation enabling a trained RF engineer at each complex to perform antenna calibration measurements and to generate antenna calibration data. This data includes continuous-scan auto-bore-based data acquisition with all-sky data gathering in support of 4th order pointing model generation requirements. Other data includes antenna subreflector focus, system noise temperature and tipping curves, antenna efficiency, reports system linearity, and instrument calibration. The ACME system design is based on the on-the-fly (OTF) mapping technique and architecture. ACME has contributed to the improved RF performance of the DSN by approximately a factor of two. It improved the pointing performances of the DSN antennas and productivity of its personnel and calibration engineers.

Rochblatt, David J.↗

NASA NTRS2021

Modernizing NASA’s Space Flight Safety and Mission Success (S&MS) Assurance Framework In Line With Evolving Acquisition Strategies and Systems Engineering Practices

This paper presents the objectives-driven, case-based safety and mission success (S&MS) assurance framework being developed by the NASA Office of Safety and Mission Assurance (OSMA), including its motivations and its implementation via a S&MS Assurance Standard that is under development, supplemented by supporting standards including an S&MS Analysis Management Standard that is also under development. A need to evolve NASA’s S&MS assurance framework has emerged in recent years, resulting from the need to accommodate new acquisition models; the need to accommodate evolving systems engineering (SE) practices; the need to stipulate acceptable levels of S&MS risk; the need for improved integration of S&MS into SE; and the need for clearer risk acceptance accountability. The objectives-driven, case-based S&MS assurance framework proposed here is responsive to that need. Its key features include: • The establishment, by NASA Acquirers, of fundamental S&MS performance objectives that define limits of acceptability for the likelihoods that mission technical objectives will be accomplished and that people, assets, and environments put at risk by the mission will not be adversely affected; • The development and approval of Providers’ S&MS plans for meeting Acquirers’ S&MS performance objectives, including commitments to support Acquirer audit, investigation, and reporting needs; • The development, by Providers, of S&MS assurance cases that argue, supported by evidence, that the Provider has met, or is on track to meeting, the fundamental S&MS objectives; • The evaluation, throughout the program/project life cycle, of Provider S&MS assurance cases as the primary S&MS-related technical basis for Acquirer risk acceptance and the granting to the Provider of authority to proceed through the program/project life cycle. This proposed S&MS assurance framework is notable for its lack of prescription of traditional S&MS requirements and strategies such as defined failure tolerances, margins, or analysis requirements. Instead, Providers are given latitude to propose their own strategies for meeting the fundamental S&MS performance objectives, subject to independent review and Acquirer approval. The result is a framework for S&MS assurance that is at once both rigorous and flexible.

Assurance Case↗

NASA NTRSDate not supplied

Overview of NASA Gateway Lunar Dust Mitigation and Contamination Modeling and Analysis

The planned NASA Artemis campaign has several lunar surface missions in which the NASA Gateway is the waypoint between lunar orbit and the lunar surface for Human Lander System (HLS). Each of these missions is an opportunity for lunar dust to be introduced into the Gateway environment, post surface mission, potentially causing end of life (EOL) performance degradation due to lunar dust contamination of sensitive hardware and systems on the exterior of Gateway and Visiting Vehicles. The Gateway Systems Engineering and Integration (SE&I) and Induced Environments teams are addressing the challenge of lunar dust with a two-pronged approach. Characterization of the lunar dust induced environment around Gateway and contamination risk is accomplished with a comprehensive physics-based framework, the Gateway On-orbit Lunar Dust Modeling and Analysis Program (GOLDMAP), which is currently in development. Analysis results from GOLDMAP define Gateway-level induced environments requirements and are flowed to elements and subsystems. In parallel, a dust mitigation strategy is being developed with a focus on lunar dust protection, dust mitigation technologies, mitigation and testing guidance, and cross-program coordination and is informed by outputs from GOLDMAP analyses. Activities supporting both components include hardware susceptibility assessments and testing, and scientific experiments on lunar regolith.

Gateway↗

NASA NTRS2002

Radio Wave Propagation Handbook for Communication on and Around Mars

This handbook examines the effects of the Martian environment on radio wave propagation on Mars and in the space near the planet. The environmental effects include these from the Martian atmosphere, ionosphere, global dust storms, aerosols, clouds, and geomorphologic features. Relevant Martian environmental parameters were extracted from the measurements of Mars missions during the past 30 years, especially from Mars Pathfinder and Mars Global Surveyor. The results derived from measurements and analyses have been reviewed through an extensive literature search. The updated parameters have been theoretically analyzed to study their effects on radio propagation. This handbook also provides basic information about the entire telecommunications environment on and around Mars for propagation researchers, system engineers, and link analysts. Based on these original analyses, some important recommendations have been made, including the use of the Martian ionosphere as a reflector for Mars global or trans-horizon communication between future Martian colonies, reducing dust storm scattering effects, etc. These results have extended our wave propagation knowledge to a planet other than Earth; and the tables, models, and graphics included in this handbook will benefit telecommunication system engineers and scientific researchers.

Ho, Christian↗

NASA NTRS2010

Health Maintenance System (HMS) Hardware Research, Design, and Collaboration

The Space Life Sciences division (SLSD) concentrates on optimizing a crew member's health. Developments are translated into innovative engineering solutions, research growth, and community awareness. This internship incorporates all those areas by targeting various projects. The main project focuses on integrating clinical and biomedical engineering principles to design, develop, and test new medical kits scheduled for launch in the Spring of 2011. Additionally, items will be tagged with Radio Frequency Interference Devices (RFID) to keep track of the inventory. The tags will then be tested to optimize Radio Frequency feed and feed placement. Research growth will occur with ground based experiments designed to measure calcium encrusted deposits in the International Space Station (ISS). The tests will assess the urine calcium levels with Portable Clinical Blood Analyzer (PCBA) technology. If effective then a model for urine calcium will be developed and expanded to microgravity environments. To support collaboration amongst the subdivisions of SLSD the architecture of the Crew Healthcare Systems (CHeCS) SharePoint site has been redesigned for maximum efficiency. Community collaboration has also been established with the University of Southern California, Dept. of Aeronautical Engineering and the Food and Drug Administration (FDA). Hardware disbursements will transpire within these communities to support planetary surface exploration and to serve as an educational tool demonstrating how ground based medicine influenced the technological development of space hardware.

Gonzalez, Stefanie M.↗

NASA NTRS1991

A proven knowledge-based approach to prioritizing process information

Many space-related processes are highly complex systems subject to sudden, major transients. In any complex process control system, a critical aspect is rapid analysis of the changing process information. During a disturbance, this task can overwhelm humans as well as computers. Humans deal with this by applying heuristics in determining significant information. A simple, knowledge-based approach to prioritizing information is described. The approach models those heuristics that humans would use in similar circumstances. The approach described has received two patents and was implemented in the Alarm Filtering System (AFS) at the Idaho National Engineering Laboratory (INEL). AFS was first developed for application in a nuclear reactor control room. It has since been used in chemical processing applications, where it has had a significant impact on control room environments. The approach uses knowledge-based heuristics to analyze data from process instrumentation and respond to that data according to knowledge encapsulated in objects and rules. While AFS cannot perform the complete diagnosis and control task, it has proven to be extremely effective at filtering and prioritizing information. AFS was used for over two years as a first level of analysis for human diagnosticians. Given the approach's proven track record in a wide variety of practical applications, it should be useful in both ground- and space-based systems.

Corsberg, Daniel R.↗