Search NASA⌕ Search

SEARCH · Search NASA

Results for “Novel Characterization Methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

An image-based technique to assess the perceptual quality of clinical chest radiographs

Purpose: Current clinical image quality assessment techniques mainly analyze image quality for the imaging system in terms of factors such as the capture system modulation transfer function, noise power spectrum, detective quantum efficiency, and the exposure technique. While these elements form the basic underlying components of image quality, when assessing a clinical image, radiologists seldom refer to these factors, but rather examine several specific regions of the displayed patient images, further impacted by a particular image processing method applied, to see whether the image is suitable for diagnosis. In this paper, the authors developed a novel strategy to simulate radiologists' perceptual evaluation process on actual clinical chest images. Methods: Ten regional based perceptual attributes of chest radiographs were determined through an observer study. Those included lung grey level, lung detail, lung noise, rib-lung contrast, rib sharpness, mediastinum detail, mediastinum noise, mediastinum alignment, subdiaphragm-lung contrast, and subdiaphragm area. Each attribute was characterized in terms of a physical quantity measured from the image algorithmically using an automated process. A pilot observer study was performed on 333 digital chest radiographs, which included 179 PA images with 10:1 ratio grids (set 1) and 154 AP images without grids (set 2), to ascertain the correlation between image perceptual attributes and physical quantitative measurements. To determine the acceptable range of each perceptual attribute, a preliminary quality consistency range was defined based on the preferred 80% of images in set 1. Mean value difference ({mu}{sub 1}-{mu}{sub 2}) and variance ratio ({sigma}{sub 1}{sup 2}/{sigma}{sub 2}{sup 2}) were investigated to further quantify the differences between the selected two image sets. Results: The pilot observer study demonstrated that our regional based physical quantity metrics of chest radiographs correlated very well with their corresponding perceptual attributes. The distribution comparisons, mean value difference estimations, and variance ratio estimations of each physical quantity between sets of images from two different techniques matched our expectation that the image quality of set 1 should be better than that of set 2. Conclusions: The measured physical quantities provide a robust reflection of perceptual image quality in clinical images. The methodology can be readily applied for automated evaluation of perceptual image quality in clinical chest radiographs.

60 APPLIED LIFE SCIENCES↗

Three dimensional dose distribution comparison of simple and complex acquisition trajectories in dedicated breast CT

Purpose: A novel breast CT system capable of arbitrary 3D trajectories has been developed to address cone beam sampling insufficiency as well as to image further into the patient’s chest wall. The purpose of this study was to characterize any trajectory-related differences in 3D x-ray dose distribution in a pendant target when imaged with different orbits. Methods: Two acquisition trajectories were evaluated: circular azimuthal (no-tilt) and sinusoidal (saddle) orbit with ±15° tilts around a pendant breast, using Monte Carlo simulations as well as physical measurements. Simulations were performed with tungsten (W) filtration of a W-anode source; the simulated source flux was normalized to the measured exposure of a W-anode source. A water-filled cylindrical phantom was divided into 1 cm{sup 3} voxels, and the cumulative energy deposited was tracked in each voxel. Energy deposited per voxel was converted to dose, yielding the 3D distributed dose volumes. Additionally, three cylindrical phantoms of different diameters (10, 12.5, and 15 cm) and an anthropomorphic breast phantom, initially filled with water (mimicking pure fibroglandular tissue) and then with a 75% methanol-25% water mixture (mimicking 50–50 fibroglandular-adipose tissues), were used to simulate the pendant breast geometry and scanned on the physical system. Ionization chamber calibrated radiochromic film was used to determine the dose delivered in a 2D plane through the center of the volume for a fully 3D CT scan using the different orbits. Results: Measured experimental results for the same exposure indicated that the mean dose measured throughout the central slice for different diameters ranged from 3.93 to 5.28 mGy, with the lowest average dose measured on the largest cylinder with water mimicking a homogeneously fibroglandular breast. These results align well with the cylinder phantom Monte Carlo studies which also showed a marginal difference in dose delivered by a saddle trajectory in the central slice. Regardless of phantom material or filled fluid density, dose delivered by the saddle scan was negligibly different than the simple circular, no-tilt scans. The average dose measured in the breast phantom was marginally higher for saddle than the circular no tilt scan at 3.82 and 3.87 mGy, respectively. Conclusions: Not only does nontraditional 3D-trajectory CT scanning yield more complete sampling of the breast volume but also has comparable dose deposition throughout the breast and anterior chest volume, as verified by Monte Carlo simulation and physical measurements.

60 APPLIED LIFE SCIENCES↗

Biorefinery and Hydrogen Fuel Cell Research (Final Technical Report)

In this project we focused on several aspects of technology development that advances the formation of an integrated biorefinery. These focus areas include: [1] establishment of pyrolysis processing systems and characterization of the product oils for fuel applications, including engine testing of a preferred product and its pro forma economic analysis; [2] extraction of sugars through a novel hotwater extaction process, and the development of levoglucosan (a pyrolysis BioOil intermediate); [3] identification and testing of the use of biochar, the coproduct from pyrolysis, for soil applications; [4] developments in methods of atomic layer epitaxy (for efficient development of coatings as in fuel cells); [5] advancement in fermentation of lignocellulosics, [6] development of algal biomass as a potential substrate for the biorefinery, and [7] development of catalysts from coproducts. These advancements are intended to provide a diverse set of product choices within the biorefinery, thus improving the cost effectiveness of the system. Technical effectiveness was demonstrated in the pyrolysis biooil based diesel fuel supplement, sugar extraction from lignocelluose, use of biochar, production of algal biomass in wastewaters, and the development of catalysts. Economic feasibility of algal biomass production systems seems attractive, relative to the other options. However, further optimization in all paths, and testing/demonstration at larger scales are required to fully understand the economic viabilities. The various coproducts provide a clear picture that multiple streams of value can be generated within an integrated biorefinery, and these include fuels and products.

09 BIOMASS FUELS↗

Atmospheric processing and aerosol aging responsible for observed increase in absorptivity of long-range-transported smoke over the southeast Atlantic

Biomass burning aerosol (BBA) from agricultural fires in southern Africa contributes about one-third of the global carbonaceous aerosol load. These particles have strong radiative effects in the southeast Atlantic (SEA), which depend in part on the radiative contrast between the aerosol layer in the free troposphere (FT) and the underlying cloud layer. However, there is large disagreement in model estimates of aerosol-driven climate forcing due to uncertainties in the vertical distribution, optical properties, and life cycle of these particles. This study applies a novel method combining remote sensing observations with regional model outputs to investigate the aging of the BBA and its impact on the optical properties during transatlantic transport from emission sources in Africa to the SEA. Results show distinct variations in extinction Ångström exponent (EAE) and single-scattering albedo (SSA) as aerosols age. Near the source, fresh aerosols are characterized by low mean SSA (0.84) and high EAE (1.85), indicating smaller, highly absorbing particles. By isolating marine contributions from the total column during BBA transport across the SEA, our analysis reveals an initial decrease in BBA absorptivity, with mean FT SSA of 0.87 after 6–7 d, followed by increased absorptivity with mean FT SSA of 0.84 after 10 d, suggesting enhanced absorption due to chemical aging. These findings indicate that BBA becomes more absorbing during extended transport across the SEA, with implications for reducing model uncertainties. Our remote-sensing-based results agree well with previous in situ studies and offer new insights into aerosol–radiation interactions and the energy balance over the SEA.

54 ENVIRONMENTAL SCIENCES↗

Synthesis of novel photocatalytic RGO-InVO{sub 4} nanocomposites with visible light photoactivity

Graphical abstract: A facile method for preparation of reduced graphene oxide (RGO) sheets supported indium vanadate (InVO{sub 4}) photocatalysts is reported. The visible light response and adsorption ability of RGO-InVO{sub 4} nanocomposites is greatly improved, which can effectively remove methyl orange and Cr (VI) from water. - Highlights: • Supramolecular photocatalyst of RGO-InVO{sub 4} was achieved. • Reduction of GO and preparation of RGO-InVO{sub 4} was simultaneous. • The prepared RGO-InVO{sub 4} shows high photocatalytic activity and adsorption capacity under visible light. • In situ growth of uniform InVO{sub 4} particles on RGO sheets is facile and efficient - Abstract: In this study, we report a facile method for preparation of reduced graphene oxide (RGO) sheets supported indium vanadate (InVO{sub 4}) photocatalysts. A wide range of characterization techniques, such as Fourier transform infrared spectroscopy, Raman spectroscopy, X-ray diffraction, Thermogravimetric analysis and Transmission electron microscopy were applied to characterize the obtained composites. The results indicated that the composites consist of uniformly dispersed InVO{sub 4} nanocrystals on RGO sheets. Visible light responses of RGO-InVO{sub 4} nanocomposites are greatly improved as compared with the bulk InVO{sub 4}. The as-prepared RGO-InVO{sub 4} nanocomposites can effectively remove methyl orange and Cr (VI) from water under visible light irradiation, which can be used as novel photocatalysts for environmental protection.

36 MATERIALS SCIENCE↗

Light Energy Transduction in Green Sulfur Bacteria

Green sulfur bacteria (GSB) are exquisitely adapted for growth at extraordinarily low light intensities. They are important primary producers of biomass in many anoxic environments, and they contribute significantly to the biogeochemical cycling of carbon, nitrogen, and sulfur on Earth. Green bacteria more generally share the property of using chlorosomes for light-harvesting, and these unusual organelles have many unique features. These include the presence of a monolayer lipid-protein envelope, self-assembling bacteriochlorophylls (BChl) in which pigment-pigment interactions predominate, and the presence of redox components ([2Fe-2S] ferredoxins and quinones) that play a role in regulating excitation energy transfer to the type-1 homodimeric reaction centers. The reaction centers of GSB are related to Photosystem I of cyanobacteria and higher plants but also exhibit several unique structural and functional features. The long-term objectives of this research program are to understand the structure, functions, and biogenesis of the chlorosomes, reaction centers, and electron transport chains that carry out the photochemical transduction of light energy into chemical energy in the model green sulfur bacterium, Chlorobaculum (formerly Chlorobium) tepidum. Over a period of 26 years, we characterized chlorosomes in detail. We identified the proteins in the chlorosome envelopes of diverse organisms, identified the nearest neighbors of those proteins, and characterized the chlorosomes of mutant strains lacking one to five of these proteins. After the genome sequence of Cba. tepidum became available, we identified all genes encoding enzymes for BChl a , BChl c/d/e/ƒ , and Chl a biosynthesis Cba. tepidum . We additionally identified all genes encoding enzymes for carotenoid biosynthesis. By constructing a bchQRU mutant strain that produces [Et, Me]-BChl d , together with collaborators who are specialists in solid-state NMR and cryo-electron microscopy, we solved the structure of the BChls in chlorosomes. Using similar methods and chlorosomes containing [Et, Me]-BChl c , we then showed that alternative structures were possible using the same syn-anti BChl dimer. The structures were refined by introducing spectroscopic data from single-chlorosome measurements. Over the course of this project, we sequenced the genomes of approximately twenty GSB strains, which provided important information for comparative analyses. Through analyses of metagenomic data from Mushroom and Octopus Springs in Yellowstone National Park, we identified a novel chlorophototroph belonging to the phylum Acidobacteriota. We successfully isolated an axenic culture of this organism. We characterized the photosynthetic apparatus of this bacterium, named Chloracidobacterium thermophilum, in significant detail, in particular its type-1, homodimeric reaction centers. Surprisingly, these reaction centers contain three types of Chls, BChl a , Chl a , and Zn-BChl a' . We showed that a dimer of Zn-BChl a' is the primary donor and Chl a the primary acceptor of electrons in this reaction center by using advanced spectroscopic techniques. We isolated eight additional strains of Chloracidobacterium spp. from Mushroom Spring and Rupite hot springs in Bulgaria. Comparative genomes showed that these represent three species, Cab. thermophilum , Cab. aggregatum , and Cab. validum . By applying comparative genomics, genetic, biochemical biophysical and physiological approaches to study green bacteria, we produced a wealth of new information about the remarkable light-harvesting and energy transduction capabilities of these poorly characterized microorganisms.

59 BASIC BIOLOGICAL SCIENCES↗

In situ and operando force-based atomic force microscopy for probing local functionality in energy storage materials

Electrochemical energy storage is the key enabling component of electric vehicles and solar-/wind-based energy technologies. The enhancement of energy stored requires the detailed understanding of charge storage mechanisms and local electrochemical and electromechanical phenomena over a variety of length scales from atoms to full cells. Classical electrochemical techniques, such as voltammetry, represent the macroscopic electrochemical properties, and consequently do not allow to extract important information about local electrochemical reactions, ions adsorption, intercalations, and transport. Understanding, controlling, and tuning the local electrochemical functionalities in functional energy materials require in situ/operando techniques which limit the use of structural and functional characterization techniques that provide local information. Here, force-based atomic force microscopies (AFMs) have provided novel insights into locally probing electrochemical mechanisms on tens of nanometer and even molecular length scales and provide a viable pathway to probe electrochemical processes in situ/operando. In this review, we highlight the contributions in the development and application of force-based AFM methods to elucidate the local charge storage mechanism in a variety of energy-related materials. We will focus in particular on methods or AFM modalities in a liquid electrolyte environment.

25 ENERGY STORAGE↗

Probing the Informational and Regulatory Plasticity of a Transcription Factor DNA–Binding Domain

Transcription factors have two functional constraints on their evolution: (1) their binding sites must have enough information to be distinguishable from all other sequences in the genome, and (2) they must bind these sites with an affinity that appropriately modulates the rate of transcription. Since both are determined by the biophysical properties of the DNA–binding domain, selection on one will ultimately affect the other. We were interested in understanding how plastic the informational and regulatory properties of a transcription factor are and how transcription factors evolve to balance these constraints. To study this, we developed an in vivo selection system in Escherichia coli to identify variants of the helixturn-helix transcription factor MarA that bind different sets of binding sites with varying degrees of degeneracy. Unlike previous in vitro methods used to identify novel DNA binders and to probe the plasticity of the binding domain, our selections were done within the context of the initiation complex, selecting for both specific binding within the genome and for a physiologically significant strength of interaction to maintain function of the factor. Using MITOMI, quantitative PCR, and a binding site fitness assay, we characterized the binding, function, and fitness of some of these variants. We observed that a large range of binding preferences, information contents, and activities could be accessed with a few mutations, suggesting that transcriptional regulatory networks are highly adaptable and expandable.

59 BASIC BIOLOGICAL SCIENCES↗

Optimizing Energy Efficiency of Plants: Quantitative Analysis of Carbon Flux

The efficiency in harvesting light energy is essential for both crop and feedstock productivity. Key targets for optimization of energy efficiency include energy capture, conversion, translocation and storage. Surprisingly little is known about the mechanisms of carbon allocation and the communication between source and sink. We surmise that regulatory networks that coordinate carbon partitioning and allocation might be control points and thus suitable for optimization by engineering. At a first step towards identifying such regulatory networks, our lab identified key players in missing steps of allocation, specifically cellular sugar uptake (SUT family, founding members identified by my team) and cellular efflux carriers (SWEET superfamily, founding members identified by my team). In plants, both classes of transporters are encoded by multigene families. We show that specific subsets of SWEETs serve critical roles in cellular sucrose efflux in the leaf for phloem loading, in seeds for seed filling, as well as in nectar section and vacuolar storage; similarly SUTs play critical roles in cellular uptake during phloem loading and seed filling. Access to the plant SWEETs provided the clues needed for identifying novel bacterial and human sugar transporters. Moreover, we found that pathogens hijack SWEETs to access the plants energy resources. In contrast to SUTs, which are predominantly proton symporters, SWEETs appear to function as facilitators, and thus must be tightly regulated to prevent spillover of carbon into cell walls. One of the key goals of this project was to identify such carriers, characterize the role of key members in carbon allocation. To decrypt the biological circuits we need novel diagnostic tools that, analogous to oscilloscopes in electrical engineering of circuit boards, allow us to quantify fluxes; here by monitoring sugars. Such probes can provide crucial information on systems properties such as metabolic impedance. To measure steady state metabolite levels with minimal invasive methods, and to develop impedance measurements in vivo, we constructed and optimized a set of probes, namely Förster Resonance Energy Transfer (FRET) nanosensors for glucose and sucrose. The probes monitor the concentration of a specific metabolite with high temporal resolution, and, since encoded genetically, can be targeted to specific cells or even specific cellular compartments and thus obtain measurements with cellular and subcellular resolution. We also developed a new platform for monitoring such sensors in vivo, the RootChip.

09 BIOMASS FUELS↗

Novel Chalcopyrites for Advanced Photoelectrochemical Water Splitting

With the support of DoE’s EERE office, our team has established a unique tool-chest of capabilities, including theoretical modeling (Lawrence Livermore National Laboratory: LLNL), state-of-the-art synthesis (Hawaii Natural Energy Institute: HNEI, Stanford, and the National Renewable Energy Laboratory: NREL) and advanced materials and interfaces characterization (University of Nevada, Las Vegas: UNLV, and Lawrence Berkeley National Laboratory: LBNL), to accelerate the development of high efficiency and durable chalcopyrite materials for advanced photoelectrochemical (PEC) water splitting. Using this synergistic approach, we have successfully created new wide bandgap chalcopyrite photocathodes generating over 10 mA/cm 2 , developed innovative strategies to protect them from corrosion, and engineered novel integration methods to circumvent thin film materials mechanical, chemical and thermal incompatibility. In Task 1 “Modeling and synthesis of chalcopyrite photocathodes”, we expanded our library of wide bandgap chalcopyrites for PEC water splitting. With support from LLNL’s “Computational Materials Diagnostics and Optimization of PEC Devices”, LBNL’s “photophysical” and NREL’s “I-III-VI Compound Semiconductors for Water-Splitting” nodes, we investigated two new chalcopyrite candidates for PEC water splitting: Cu(In,Al)Se 2 and Cu(In,B)Se 2 . We also further developed ordered vacancy compounds, such as CuGa 3 Se 5 , with unprecedented durability during PEC waters splitting in acidic solutions. In Task 2 “Interfaces engineering for enhanced efficiency and durability”, we addressed both the non-ideal band-edge positions of chalcopyrites with respect to water redox potentials, as well as their chemical instability under PEC water splitting, with a buried-junctions approach. With help from NREL’s “High-Throughput Experimental Thin Film Combinatorial Capabilities” and “Corrosion Analysis of Materials” nodes, we engineered environmentally friendly n-type buffers, including Mn x Zn 1-x O, to adjust the chalcopyrite band-edge positions and achieved photovoltages as high as 925 mV. Also, we integrated non-precious catalytic-protecting layers, such as WO 3 , to enhance the water splitting long-term stability of chalcopyrite absorbers. Finally, in Task 3 “Hybrid photoelectrode device integration”, we proposed an innovative method to bond wide bandgap photocathodes onto narrow bandgap PV drivers at room temperature using conductive polymers. Our semi-monolithic approach addressed fundamental processing incompatibility issues, as both the photocathode and the PV driver are processed separately. Proof-of-concept whole-chalcopyrite tandems were obtained by consecutive exfoliation and transfer of fully integrated 1.85 eV CuGa 3 Se 5 and 1.13 eV CuInGaSe 2 stacks from their Mo/SLG substrates onto a new single FTO host substrate.

08 HYDROGEN↗

Interface Science Using Ambient Pressure Hard X-ray Photoelectron Spectroscopy

The development of novel in situ/operando spectroscopic tools has provided the opportunity for a molecular level understanding of solid/liquid interfaces. Ambient pressure photoelectron spectroscopy using hard X-rays is an excellent interface characterization tool, due to its ability to interrogate simultaneously the chemical composition and built-in electrical potentials, in situ. In this work, we briefly describe the “dip and pull” method, which is currently used as a way to investigate in situ solid/liquid interfaces. By simulating photoelectron intensities from a functionalized TiO2 surface buried by a nanometric-thin layer of water, we obtain the optimal photon energy range that provides the greatest sensitivity to the interface. We also study the evolution of the functionalized TiO2 surface chemical composition and correlated band-bending with a change in the electrolyte pH from 7 to 14. Our results provide general information about the optimal experimental conditions for characterizing the solid/liquid interface using the “dip and pull” method, and the unique possibilities offered by this technique.

Favaro, Marco (ORCID:0000000235028332)↗

Utilization of the Differential Die-Away Self-Interrogation Technique for Characterization and Verification of Spent Nuclear Fuel

New nondestructive assay techniques are sought to better characterize spent nuclear fuel. One of the NDA instruments selected for possible deployment is differential die-away self-interrogation (DDSI). The proposed DDSI approach for spent fuel assembly assay utilizes primarily the spontaneous fission and (α, n) neutrons in the assemblies as an internal interrogating radiation source. The neutrons released in spontaneous fission or (α,n) reactions are thermalized in the surrounding water and induce fission in fissile isotopes, thereby creating a measurable signal from isotopes of interest that would be otherwise difficult to measure. The DDSI instrument employs neutron coincidence counting with 3He tubes and list-mode-based data acquisition to allow for production of Rossi-alpha distributions (RADs) in post-processing. The list-mode approach to data collection and subsequent construction of RADs has expanded the analytical possibilities, as will be demonstrated throughout this thesis. One of the primary advantages is that the measured signal in the form of a RAD can be analyzed in its entirety including determination of die-away times in different time domains. This capability led to the development of the early die-away method, a novel leakage multiplication determination method which is tested throughout the thesis on different sources in simulation space and fresh fuel experiments. The early die-away method is a robust, accurate, improved method of determining multiplication without the need for knowledge of the (α,n) source term. The DDSI technique and instrument are presented along with the many novel capabilities enabled by and discovered through RAD analysis. Among the new capabilities presented are the early die-away method, total plutonium content determination, and highly sensitive missing pin detection. Simulation of hundreds of different spent and fresh fuel assemblies were used to develop the analysis algorithms and the techniques were tested on a variety of spontaneous fission-driven fresh fuel assemblies at Los Alamos National Laboratory and the BeRP ball at the Nevada National Security Site. The development of the new, improved analysis and characterization methods with the DDSI instrument makes it a viable technique for implementation in a facility to meet material control and safeguards needs.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Hierarchically Superstructured Metal Sulfides: Facile Perturbation-Assisted Nanofusion Synthesis and Visible Light Photocatalytic Characterizations

A novel and simple perturbation-assisted nanofusion (PNF) synthetic strategy was developed for the fabrication of stable hierarchically superstructured metal sulfides. This promising approach, based on a kinetically controlled precipitation to simultaneously condense and re-dissolve polymorphic nanocrystallites, provides the resultant samples with a unique mesoporous framework. This PNF approach is environmentally friendly, produces gram-scale products in a matter of hours, and is complimentary to traditional hard or soft templating methods for the construction of mesoporous metal sulfides. PNF derived hierarchical porous CdS exhibited a vastly improved photocatalytic performance over its commercial bulk counterpart under visible light irradiation, demonstrating the advantage of the porous morphology for photocatalysis resulting from the enlarged surface area and the easy accessibility of the mesopores.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Calorimetric metal vapor adsorption energies for characterizing industrial catalyst support materials

Many important catalysts and electro-catalysts for energy and environmental technologies involve late transition metal atoms and nanoparticles dispersed across the surface of high-surface-area support materials, for example, oxide nanoparticles. The surface reactivity and long-term stability against deactivation of these materials depends strongly on the strength of bonding of the metal atom and nanoparticles to the support surface. Here, we introduce a novel calorimetry method that implements a LiTaO 3 crystal for heat detection and extends metal adsorption calorimetry to surfaces of nanomaterials that are deposited from liquid solutions, as is typical when preparing industrial catalyst supports. This allows one to measure the strength of metal atom bonding and the adhesion energy of metal nanoparticles to clean surfaces of technologically relevant catalyst supports. We demonstrate that here by measuring the heat of Ag vapor adsorption onto the clean surfaces of high-surface-area TiO 2 anatase powdered support materials (i.e., 5-nm-diameter nanoparticles). These heats of adsorption show a pulse-to-pulse standard deviation of only 9.3 kJ/mol (3.3%) for pulses containing only 1% of a monolayer of Ag vapor, with potential for a 5-fold reduction in noise if used with another metal evaporator. The calorimeter was also proven to work well measuring heats of Ag adsorption on calcium niobate(001) nanosheets deposited as thin films from liquid solution. Here, this calorimeter opens up the possibility of using metal adsorption calorimetry to screen catalyst support materials for the strengths with which they bind metal atoms and metal nanoparticles, offering new opportunities to discover better support materials or for basic scientific study of structure / function relationships with respect to metal / support bond energies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A novel synthetic single crystal diamond device for in vivo dosimetry

Purpose: Aim of the present work is to evaluate the synthetic single crystal diamond Schottky photodiode developed at the laboratories of “Tor Vergata” University in Rome in a new dosimeter configuration specifically designed for offline wireless in vivo dosimetry (IVD) applications. Methods: The new diamond based dosimeter, single crystal diamond detector (SCDD-iv), consists of a small unwired detector and a small external reading unit that can be connected to commercial electrometers for getting the detector readout after irradiation. Two nominally identical SCDD-iv dosimeter prototypes were fabricated and tested. A basic dosimetric characterization of detector performances relevant for IVD application was performed under irradiation with {sup 60}Co and 6 MV photon beams. Preirradiation procedure, response stability, short and long term reproducibility, leakage charge, fading effect, linearity with dose, dose rate dependence, temperature dependence, and angular response were investigated. Results: The SCDD-iv is simple, with no cables linked to the patient and the readout is immediate. The range of response with dose has been tested from 1 up to 12 Gy; the reading is independent of the accumulated dose and dose rate independent in the range between about 0.5 and 5 Gy/min; its temperature dependence is within 0.5% between 25 and 38 °C, and its directional dependence is within 2% from 0° to 90°. The combined relative standard uncertainty of absorbed dose to water measurements is estimated lower than the tolerance and action level of 5%. Conclusions: The reported results indicate the proposed novel offline dosimeter based on a synthetic single crystal diamond Schottky photodiode as a promising candidate for in vivo dosimetry applications with photon beams.

07 ISOTOPE AND RADIATION SOURCES↗

An Iterative Optimization Strategy for Nuclear Reactor Design

Optimization of a complex system involves the determination of optimum values for a set of design parameters to meet a specific set of objectives on the quantities of interest (QOI) wherein, the design parameters are a subset of the input parameters, and the QOIs are determined from the output parameters. Particularly, when the parameter space is large, optimization necessitates a significant number of executions of the simulator to obtain a desired solution in tolerance limits. When the simulations are expensive in terms of computation time, an emulator, based on regression methods is useful for predictions. This work presents a novel methodology that uses an iterative hybrid global optimization method (GOM) using genetic algorithms (GA), and simulated annealing (SA) model coupled (HYBGASA) with a Gaussian process regression method based emulator (GPMEM) to optimize a set of input parameters based on a set of defined objectives in a nuclear reactor power system. Hereafter this iterative hybrid method comprising of HYBGASA, and GPMEM would be called as 'IHGOM'. In addition to optimization, IHGOM iteratively updates the trial data, obtained from the neighborhood of the near optimal solution, used to train the GPMEM in order to reduce regression errors. The objective is to develop, model and analyze IHGOM and apply it to an optimization problem in the design of a nuclear reactor. Development and analysis of IHGOM and its implementation in a nuclear reactor power system problem is a significant contribution to the optimization and the nuclear engineering communities. The objective of this work is to develop IHGOM and apply it to an optimization problem in the design of a nuclear reactor. The research involves the development and analysis of a novel optimization strategy, IHGOM. The feasibility analysis involves the optimization of a set of defined parameters in the design and development of a complex system. A GCFBR reactor power system with a set of defined objectives and parameters based on criticality and depletion studies have been characterized as the complex system. Development and analysis of IHGOM and its implementation in an optimization problem in the design of a GCFBR is a significant contribution to the optimization and the nuclear engineering communities. In particular based on the literature review, a coupled GOM and GPMEM method for optimization and regression error reduction in nuclear engineering domain has never been explored. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Sonochemical fabrication of fluorinated mesoporous titanium dioxide microspheres

A sonochemical-hydrothermal method for preparing fluorinated mesoporous TiO{sub 2} microspheres was developed. Formation of mesoporous TiO{sub 2} and doping of fluorine was achieved by sonication and then hydrothermal treatment of a solution containing titanium isopropoxide, template, and sodium fluoride. The as-synthesized TiO{sub 2} microspheres were characterized by X-ray diffraction (XRD), Fourier translation infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray (EDX) spectroscopy, photoluminescence spectroscopy (PL), and BET surface areas. The P123 template was removed completely during the hydrothermal and washing steps, which was different from the conventional calcination treatment. The as- synthesized TiO{sub 2} microspheres had good crystallinity and high stability. Results from the photocatalytic degradation of methylene blue (MB) showed that fluorination could remarkably improve the photocatalytic activity of titanium dioxide. - Graphical abstract: A novel method for preparing fluorinated mesoporous TiO{sub 2} microspheres was developed by a combined ultrasonic and hydrothermal treatment. The fluorinated TiO{sub 2} microspheres show high crystallinity, stability and enhanced photocatalytic activity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Gradient-based surface nuclear magnetic resonance for groundwater investigation

In medical magnetic resonance imaging, spatial localization (imaging) is based upon the application of controlled magnetic field gradients on top of the main magnetic field to spatially modulate the frequency and/or phase of the nuclear magnetic resonance (NMR) signal across the volume of investigation. In this work, we have applied similar physical principles to produce controlled magnetic field gradients during surface NMR-based groundwater investigations. In this approach, a gradient pulse of variable amplitude or duration is applied immediately after the excitation pulse to cause predictable phase encoding of the NMR signal as a function of depth. This approach is also applicable to emerging surface NMR detection methods that use a prepolarization field with fast nonadiabatic turn-off to generate detectable NMR signals from the shallow subsurface. In this case, the gradient pulse is applied after terminating the prepolarization field and provides a heretofore unavailable means of localizing the NMR response as a function of depth. The application of gradients can also be combined with tip-angle-based modulation to yield higher imaging resolution than can be achieved through either gradient- or tip-angle-based imaging alone. We implemented this new gradient-based capability into a surface NMR gradient generation accessory that is compatible with the GMR-Flex instrument and developed surface NMR-specific forward modeling and linear inverse models. We validated the accuracy of this novel gradient-based sNMR technology using computer simulations, experiments using a small pool filled with a discrete layer of bulk water, and field experiments at well-characterized groundwater test sites along Ebey Island, WA, and Larned, KS. The gradient-based sNMR imaging observations were compared with high-resolution direct push NMR results observed at these sites. The results of computer simulations and field experiments indicate improvements in both the detection (signal-to-noise ratio) and spatial resolution of shallow subsurface water content using gradient-based surface NMR, compared with traditional surface NMR imaging methods.

Geochemistry & Geophysics↗