Search NASA⌕ Search

SEARCH · Search NASA

Results for “Observer Mode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Probing Defects and Spin‐Phonon Coupling in CrSBr via Resonant Raman Scattering

Abstract Understanding the stability limitations and defect formation mechanisms in 2D magnets is essential for their utilization in spintronic and memory technologies. Here, defects in mono‐ to multilayer CrSBr are correlated with structural, vibrational, and magnetic properties. Resonant Raman scattering is used to reveal distinct vibrational defect signatures. In pristine CrSBr, it is shown that bromine atoms mediate vibrational interlayer coupling, allowing for distinguishing between surface and bulk defect modes. Environmental exposure is shown to cause drastic degradation in monolayers, with the formation of intralayer defects. This is in contrast to multilayers that predominantly show bromine surface defects. Through deliberate ion irradiation, the formation of defect modes is tuned: these are strongly polarized and resonantly enhanced, reflecting the quasi‐‐1D electronic character of CrSBr. Strikingly, pronounced signatures of spin‐phonon coupling of the intrinsic phonon modes and the ion beam‐induced defect modes are observed throughout the magnetic transition temperature. Overall, defect engineering of magnetic properties is possible, with resonant Raman spectroscopy serving as a direct fingerprint of magnetic phases and defects in CrSBr.

2D magnetic semiconductors↗

Degradation of Bimetallic Model Electrocatalysts ___ an in situ XAS Study

One of the major challenges in the development of clean energy fuel cells is the performance degradation of the electrocatalyst, which, apart from poisoning effects, can suffer from corrosion due to its exposure to a harsh environment under high potentials. In this communication, we demonstrate how interactions of Pt with a transition metal support affect not only, as commonly intended, the catalytic activity, but also the reactivity of Pt towards oxide formation or dissolution. We use two well-defined single-crystal model systems, Pt/Rh(111) and Pt/Au(111) and a unique x-ray spectroscopy technique with enhanced energy resolution to monitor the potential-dependent oxidation state of Pt, and find two markedly different oxidation mechanisms on the two different substrates. This information can be of great significance for future design of more active and more stable catalysts. We have studied the potential-induced degradation of Pt monolayer model electrocatalysts on Rh(111) and Au(111) single-crystal substrates. The anodic formation of Pt oxides was monitored using in situ high energy resolution fluorescence detection x-ray absorption spectroscopy (HERFD XAS). Although Pt was deposited on both substrates in a three-dimensional island growth mode, we observed remarkable differences during oxide formation that can only be understood in terms of strong Pt-substrate interactions throughout the Pt islands. Anodic polarization of Pt/Rh(111) up to +1.6 V vs. RHE (reversible hydrogen electrode) leads to formation an incompletely oxidized passive layer, whereas formation of PtO2 and partial Pt dissolution is observed for Pt/Au(111).

08 HYDROGEN↗

Models for Single–Site Heterogeneous Catalysts on Carbon: MoO 2 Epoxidation Catalyst Anchored to a Fullerene

Single-site molybdenum dioxo catalysts, fullerenol/MoO 2 , are prepared via grafting precursor (DME)MoO 2 Cl 2 onto a highly polyhydroxylated fullerene (ful) and an isomerically-pure and well-defined fullerene (ful*). These catalyst structures are characterized by ICP-OES, XPS, XANES, EXAFS, DRIFT, Raman, and NMR spectroscopy, and DFT. Mo 3d 5/2 XPS and Mo K-edge XANES assign the oxidation state as Mo(VI). Mo EXAFS data fitting reveals two Mo=O double and two Mo–O single bonds at distances of 1.7 and 1.9 Å, respectively, while an Mo=O stretchingl mode is observed at ~950 cm –1 by DRIFT and Raman spectroscopy. These data align well with DFT computational results, supporting the proposed catalyst structure as Fullerene(-μ-O-) 2 M(=O) 2 . Additionally, DFT provides insight into the energetically favorable grafting sites for an isomerically pure fullerenol. The scope of fullerenol/MoO 2 mediated alkene epoxidation includes abiotic alkenes, natural occurring terpenes, and conjugated olefins. For cyclooctene the rate law is first-order in [Mo], near first order in [olefin] and zero-order in [t-butyl hydroperoxide]. A plausible reaction mechanism involves peroxide addition first and then cyclooctene addition directly across the peroxo bond forming the epoxide product, consistent with DFT computation. Overall, fullerenol/MoO 2 shows promise as a sustainable and structurally well-defined system with versatile catalytic activity and good epoxidation recyclability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CO as a Probe Molecule to Study Surface Adsorbates during Electrochemical Oxidation of Propene

A major challenge in the electrochemical oxidation of hydrocarbons is understanding the formation of intermediate species, some of which continue to react, while others are non-reactive or poisonous species that block adsorption of further reactants. Herein we investigate the identity and behavior of adsorbates formed during partial oxidation of propene. We employ two techniques: Electrochemistry-Mass Spectrometry (EC-MS) and Attenuated Total Reflection Infrared Spectroscopy (ATR-FTIR). In both cases, we use CO as a probe molecule, to perturb the ad-layer of propene intermediates. In the EC-MS experiments, propene and its intermediates were quantified by triggering their desorption via displacement with CO. We show evidence for at least two distinct classes of propene adsorbates, via CO displacement and electrochemical stripping. A redshift in the ν(C–O) mode was observed, during IR spectroscopy, reflecting the chemical environment arising from strongly bound propene intermediates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measurement of branching fractions of charmless four-body Λ o b and Ξ o b decays

A search for charmless four-body decays of Λ o b and Ξ o b baryons with a proton and three charged mesons (either kaons or pions) in the final state is performed. The data sample used was recorded in 2011 and 2012 with the LHCb experiment and corresponds to an integrated luminosity of 3 fb –1 . Six decay modes are observed, among which Λ o b → pK – π + π – , Λ o b → pK – K + K – , Ξ o b → pK – π + π – and Ξ o b → pK – π + K – are established for the first time. Their branching fractions (including the ratio of hadronisation fractions in the case of the Ξ o b baryon) are determined relative to the Λ o b → Λ c + π – decay.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Climatology of diablo winds in Northern California and their relationships with large-scale climate variabilities

The most destructive wildfires recently in Northern California have been linked to the occurrences of Diablo Winds (DWs). This study investigates the climatology of DWs during September–December 1979–2018, and their relationships with various climate modes using observations and two high-resolution reanalysis datasets. Our finding shows that DWs do not have a long-term trend in terms of the annual total number, total duration, and associated maximum wind speeds of DWs over the past 4 decades. However, their associated minimum relative humidity (RH) has decreased significantly, especially in October, which suggests that the dryness during DWs has become more severe with time, possibly leading to an increased chance of fires, and their destructive potential. We also find that the annual total number and duration of DWs have exhibited an quasi-periodic variation, with intervals ranging from 2 to 4 years. The periodic variability of DWs might be attributed to the teleconnections between DWs and climate oscillations, specifically the El Niño–Southern Oscillation (ENSO) and the quasi-biennial oscillation (QBO), through their modulation of pressure systems near California and the location of the Pacific jet stream. It is suggested that when La Niña and the QBO westerly phases co-occur in the spring, DWs in the following fall and winter tend to occur more frequently, and are associated with more intense high winds and dryness as compared to other springtime QBO and ENSO phases. This relationship may be used to predict the seasonal outlook of DWs.

54 ENVIRONMENTAL SCIENCES↗

Discovery of amido-benzisoxazoles as potent c-Kit inhibitors

Deregulation of the receptor tyrosine kinase c-Kit is associated with an increasing number of human diseases, including certain cancers and mast cell diseases. Interference of c-Kit signaling with multi-kinase inhibitors has been shown clinically to successfully treat gastrointestinal stromal tumors and mastocytosis. Targeted therapy of c-Kit activity may provide therapeutic advantages against off-target effects for non-oncology applications. A new structural class of c-Kit inhibitors is described, including in vitro c-Kit potency, kinase selectivity, and the observed binding mode.

59 BASIC BIOLOGICAL SCIENCES↗

Effect of the composition of the hot product stream in the quasi-steady extinction of strained premixed flames

The extinction of premixed CH{sub 4}/O{sub 2}/N{sub 2} flames counterflowing against a jet of combustion products in chemical equilibrium was investigated numerically using detailed chemistry and transport mechanisms. Such a problem is of relevance to combustion systems with non-homogeneous air/fuel mixtures or recirculation of the burnt gases. Contrary to similar studies that were focused on heat loss/gain, depending on the degree of non-adiabaticity of the system, the emphasis here was on the yet unexplored role of the composition of counterflowing burnt gases in the extinction of lean-to-stoichiometric premixed flames. For a given temperature of the counterflowing products of combustion, it was found that the decrease of heat release with increase in strain rate could be either monotonic or non-monotonic, depending on the equivalence ratio {phi}{sub b} of the flame feeding the hot combustion product stream. Two distinct extinction modes were observed: an abrupt one, when the hot counterflowing stream consists of either inert gas or equilibrium products of a stoichiometric premixed flame, and a smooth extinction, when there is an excess of oxidizing species in the combustion product stream. In the latter case four burning regimes can be distinguished as the strain rate is progressively increased while the heat release decreases smoothly: an adiabatic propagating flame regime, a non-adiabatic propagating flame regime, the so-called partially-extinguished flame regime, in which the location of the peak of heat release crosses the stagnation plane, and a frozen flow regime. The flame structure was analyzed in detail in the different burning regimes. Abrupt extinction was attributed to the quenching of the oxidation layer with the entire H-OH-O radical pool being comparably reduced. Under conditions of smooth extinction, the behavior is different and the concentration of the H radical decreases the most with increasing strain rate, whereas OH and O remain comparatively abundant in the oxidation layer. As the profile of the heat release rate thickens, the oxidation layer is quenched and the attack of the fuel relies more heavily on the OH radicals. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heteroepitaxial growth of cadmium carbonate at dolomite and calcite surfaces: Mechanisms and rates

Here, the systematic variation of rates and the mechanism of cadmium uptake on the (104) surface of dolomite (CaMg(CO 3 ) 2 ) were investigated using in situ and ex situ atomic force microscopy (AFM), ex situ specular X-ray reflectivity (XR), and ex situ X-ray fluorescence (XRF). Selected experiments were performed on the calcite (CaCO 3 ) (104) surface for comparison. Aqueous solutions of CdCl 2 , CaCl 2 , and NaHCO 3 , undersaturated with respect to calcite and supersaturated with respect to otavite (CdCO 3 ) and the (Cd x Ca 1-x )CO 3 solid solution, were reacted with dolomite surfaces for minutes to days. Calcite substrates were reacted with solutions containing 1-50 μM CdCl 2 , and with no added Ca or CO 3 . Thin carbonate films following the Stranski-Krastanov growth mode were observed on both substrates. Specular XR and XRF revealed the formation of nm-thick Cd-rich carbonate films that were structurally ordered with respect to the dolomite (104) plane. Epitaxial films adopted the calcite crystal structure with a d 104 - spacing (3.00 Å) larger than those of pure dolomite (2.88 Å) and otavite (2.95 Å) indicating either a solid solution with x approximate to 0.5, or a strained Cd-rich carbonate with a composition near that of otavite. The growth rate r of this phase increases with the initial supersaturation of the solution with respect to the solid solution, beta max, and follows the empirical relationship, as determined from XRF measurements, given by: r = 10 -4.88 ± 0.42 (β 2.29 ± 0.24 max - 1), (in units of atoms of Cd/Å 2 /h).The morphology of the overgrowth also varied with β max , as exemplified by AFM observations. Growth at step edges occurred over the entire β max range considered, and additional growth features including 3 Å high monolayer islands and ~ 25 Å high tall islands were observed when log β max > 1. On calcite, in situ XR indicated that this phase is similar to the Cd-rich overgrowth formed on dolomite and images obtained from X-ray reflection interface microscopy (XRIM) reveal the existence of laterally variable Cd-rich domains.

58 GEOSCIENCES↗

Comparative chemical and structural analyses of two uranium dioxide fuel pellets

Here, a comparative investigation of the trace element, U and Pb isotopic compositions, and structural attributes of two uranium dioxide fuel pellets was conducted for nuclear forensic applications. One fuel pellet consists of natural UO 2 (0.71% 235 U), while the other contains enriched UO 2 (3.98% 235 U). Numerous impurities, including transition metals, lanthanides, and main group elements were detected in both fuel pellets with total trace element contents that vary between 9.77 and 11.37 μg/g. The relative abundances of the transition metal impurities in the natural UO 2 fuel pellet are linked to the source U ore and provide important insights into its provenance. X-ray fluorescence spectroscopy was utilized to investigate and compare the macro-(cm)-scale distribution of impurities within each of the fuel pellets. In addition, structural properties of the fuel pellets were examined using powder X-ray diffraction (PXRD) and Raman and infrared spectroscopy. Differences in the intensity of the T2 g U-O stretching vibrational mode were observed in the Raman spectra of the fuel pellets. Lastly, Pb isotope ratios were investigated to potentially differentiate between the natural and enriched UO 2 samples and are linked to the process history of these materials.

36 MATERIALS SCIENCE↗

Efficient discrimination of natural stereoisomers of chicoric acid, an HIV-1 integrase inhibitor

Plants from the Asteraceae family are known to contain a wide spectrum of phytochemicals with various nutraceutical properties. One important phytochemical, chicoric acid (CA), is reported to exist in plants, such as Sonchus oleraceus and Bidens pilosa, as stereoisomers. They occur either as the naturally abundant RR-chicoric acid (RR-CA), or the less abundant RS-chicoric acid (RS-CA), also known as meso-chicoric acid. To date, little is known about the biological activity of RS-CA, but there is evidence of its anti-HIV (human immunodeficiency virus) properties. In this study, a reliable analytical method was developed to distinguish between the two stereoisomers detected in S. oleraceus and B. pilosa. Structure identification used liquid chromatography–mass spectrometry (LC-MS) in combination with ultraviolet radiation (UV) -induced geometrical isomerization, molecular dynamics (MD) simulations, and density functional theory (DFT) models. Optimized structures from DFT calculations were used for docking studies against the HIV-1 integrase enzyme. Different retention times on the reverse phase chromatograms revealed the plants produce two different CA stereoisomers: S. oleraceus produced the RR-CA isomer, while B. pilosa produced the RS-CA isomer. DFT results demonstrated the RR-CA molecule was more stable than RS-CA due to the stabilizing force of intra-molecular hydrogen bonding. Differences in the HIV-1 integrase enzyme binding modes were observed, with the RR-CA being a more potent inhibitor than the RS-CA molecule. The results highlight the significance of plant metabolite structural complexity from both chemical and biological perspectives. Artificial formation of geometrical isomers, in combination with the predictive ability of DFT models and the resolving power of the LC-MS, can be exploited to distinguish closely related compounds, in particular stereoisomers.

chicoric acid, RR-chicoric acid, RS-chicoric acid,↗

Pyrochlore 'dynamic spin-ice' Pr{sub 2}Sn{sub 2}O{sub 7} and monoclinic Pr{sub 2}Ti{sub 2}O{sub 7}: A comparative temperature-dependent Raman study

Here we report a temperature-dependent Raman study of the pyrochlore 'dynamic spin-ice' compound Pr{sub 2}Sn{sub 2}O{sub 7} and compare the results with its non-pyrochlore (monoclinic) counterpart Pr{sub 2}Ti{sub 2}O{sub 7}. In addition to phonon modes, we observe two bands associated with electronic Raman scattering involving crystal field transitions in Pr{sub 2}Sn{sub 2}O{sub 7} at {approx}135 and 460 cm{sup -1} which couple strongly to phonons. Anomalous temperature dependence of phonon frequencies that are observed in pyrochlore Pr{sub 2}Sn{sub 2}O{sub 7} are absent in monoclinic Pr{sub 2}Ti{sub 2}O{sub 7}. This, therefore, confirms that the strong phonon-phonon anharmonic interactions, responsible for the temperature-dependent anomalous behavior of phonons, arise due to the inherent vacant sites in the pyrochlore structure. - Abstract: The phonon-phonon anharmonic interaction which is responsible for the temperature-dependent anomalous behavior of phonons, arise due to the inherent vacant sites in the pyrochlore structure. Highlights: > Pyrochlore Pr{sub 2}Sn{sub 2}O{sub 7} and its monoclinic counterpart Pr{sub 2}Ti{sub 2}O{sub 7} are compared. > Raman spectroscopic data reveal temperature-dependent phonon anomalies. > Crystal field transitions in Pr{sub 2}Sn{sub 2}O{sub 7} couple with phonons. > Phonon anomalies are attributed to phonon-phonon anharmonic interactions. > Phonon anharmonicity in pyrochlores arise due to their inherent vacancies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High pressure structural study of {beta}-Ti{sub 3}O{sub 5}: X-ray diffraction and Raman spectroscopy

The structural stability of {beta}-Ti{sub 3}O{sub 5} (C2/m) has been investigated by X-ray diffraction and Raman spectroscopy with diamond anvil cells. {beta}-Ti{sub 3}O{sub 5} is stable up to about 26 GPa at room temperature. Isothermal pressure-volume relationship of {beta}-Ti{sub 3}O{sub 5} is well presented by the third-order Birch-Murnaghan equation of state with V{sub 0}=348.6(8) A{sup 3} and B{sub 0}=216(9) GPa. Axial compressibility presents obvious anisotropy. The a-axis and c-axis are more compressible than b-axis due to the different crystal structure arrangement of {beta}-Ti{sub 3}O{sub 5} along b-axis and perpendicular to b-axis direction. The Grueneisen parameters of thirteen observed Raman modes are 0.79-1.74, whose mean is 1.32. - Graphical abstract: The crystal structure of {beta}-Ti{sub 3}O{sub 5}: the projection of {beta}-Ti{sub 3}O{sub 5} along b-axis (Left) and the projection of {beta}-Ti{sub 3}O{sub 5} along c-axis (Right). Highlights: Black-Right-Pointing-Pointer High pressure structural stability of {beta}-Ti{sub 3}O{sub 5} was investigated. Black-Right-Pointing-Pointer {beta}-Ti{sub 3}O{sub 5} is stable up to about 26 GPa. Black-Right-Pointing-Pointer Axial compressibility presents obvious anisotropy. Black-Right-Pointing-Pointer Pressure-volume relationship is well presented by Birch-Murnaghan equation of state. Black-Right-Pointing-Pointer The Grueneisen parameters are 0.79-1.74.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of an unusual low-temperature phase transformation in RbBH{sub 4} by neutron diffraction

To investigate the previously reported low-temperature phase transition in rubidium borohydride (RbBH{sub 4}) near 48.5 K, we carried out neutron powder diffraction and vibrational spectroscopy measurements both above and below this temperature on an isotopically-enriched sample of Rb{sup 11}BD{sub 4}. Our diffraction data reflected an average cubic Fm3{sup ¯}m structure with BD{sub 4}{sup −} anion orientational disorder at all temperatures, with no hint of extra Bragg peaks due to long-range orientational order below the transition temperature as reported by others. These structural results and careful analysis of torsional vibrations in RbBD{sub 4} corroborate the results of prior neutron vibrational spectroscopy measurements suggesting that the low-temperature RbBH{sub 4} structure indeed possesses some orientational ordering of the BH{sub 4}{sup −} anions, but of a shorter-ranged nature insensitive to powder diffraction methods. - The neutron powder diffraction pattern of RbBD{sub 4} below the phase transition temperature (shown here in black) is indistinguishable from that collected above the phase transition temperature. The inset depicts the cubic structure that fits the data at both temperatures. - Highlights: • We investigated the nature of the RbBD{sub 4} phase transition using NVS and NPD. • A change in shape of the RbBD{sub 4} torsion mode was observed across the transition. • The RbBD{sub 4} diffraction pattern across this phase transition was unchanged. • The phase transition in RbBD{sub 4} appears to produce only short-range ordering of BD{sub 4}{sup −}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structure details of La- and Bi-substituted hydroxyapatites: Evidence for LaO{sup +} and BiO{sup +} with a very short metal–oxygen bond

Crystal structures of substituted apatites with general formula Ca{sub 10−x}M{sub x}(PO{sub 4}){sub 6}(OH{sub 1−δ}){sub 2−x}O{sub x}, where M=La, Bi, 0≤x<2, were refined using high-resolution X-ray powder diffraction patterns. Individual positions for Ca{sup 2+} and M{sup 3+}-ions localized near Ca2-site were determined. The M{sup 3+}-ion was found shifted toward the hexagonal channel center with respect to the Ca{sup 2+}-ion, forming very short bond with the intrachannel O{sup 2−}, while leaving considerably longer distances to other oxygen atoms, which suggested the existence of a MO{sup +} ion. Distinct bands of stretching M–O modes were observed in the Raman and FT-IR spectra of the compounds. The bond lengths for BiO{sup +} and LaO{sup +} were estimated to be 2.05(1) and 2.09(1) Å correspondingly. The latter was almost 0.3 Å lower than the shortest La–O bond in La{sub 2}O{sub 3}. The realization of such a strong lanthanide–oxygen bond in a crystal lattice could provide a very high axial ligand field and might be implemented to develop high-energy-barrier single-molecule magnets as well as to tune properties of lanthanide-based luminophores. - Graphical abstract: A fragment of the La-for-Ca substituted apatite crystal structure focusing on the La–O bond. - Highlights: • Individual positions in the apatite crystal lattice for a doping atom (La, Bi) and Ca. • The doping atom shifts toward the center of the hexagonal channel. • BiO{sup +} and LaO{sup +} with estimated short bond lengths of 2.05 and 2.09 Å respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Precipitation in a lead calcium tin anode

Samples from a hot rolled sheet of a tin and calcium bearing lead alloy were solution heat treated at 300 Degree-Sign C and cooled down to room temperature at different rates; these samples were left at room temperature to study natural precipitation of CaSn{sub 3} particles. The samples were aged for 45 days before analysing their microstructure, which was carried out in a scanning electron microscope using secondary and backscattered electron detectors. Selected X-ray spectra analyses were conducted to verify the nature of the precipitates. Images were taken at different magnifications in both modes of observation to locate the precipitates and record their position within the images and calculate the distance between them. Differential scanning calorimeter analyses were conducted on selected samples. It was found that the mechanical properties of the material correlate with the minimum average distance between precipitates, which is related to the average cooling rate from solution heat treatment. - Highlights: Black-Right-Pointing-Pointer The distance between precipitates in a lead alloy is recorded. Black-Right-Pointing-Pointer The relationship between the distance and the cooling rate is established. Black-Right-Pointing-Pointer It is found that the strengthening of the alloy depends on the distance between precipitates.

36 MATERIALS SCIENCE↗

Advanced 3D characterisation of iodine induced stress corrosion cracks in zirconium alloys

Highlights: • Macroscopic crack direction is affected by metallurgical state. • High resolution XCT reveals complex crack morphology. • 3D-EBSD used to fully characterise attacked grain boundaries. • Evidence of iodine segregation ahead of a crack tip. - Abstract: In this study, a range of advanced techniques have been used to characterise iodine-induced stress corrosion cracks, and investigate their interaction with microstructure in zirconium alloys used as cladding material in nuclear power reactors. C-ring samples, machined from cladding tubes in a recrystallised and cold worked condition, were subjected to compressive stress while submerged in an iodine-ethanol solution to simulate stress corrosion cracks arising from pellet cladding interaction. The complex morphology of these stress corrosion cracks was imaged in 3D using X-ray computed tomography (XCT), and subsequent analysis using both 2D and 3D electron backscatter diffraction (EBSD) allowed for the interaction of these cracks with microstructure to be investigated. Intergranular cracking modes were observed to dominate in the recrystallised microstructure, resulting in cracking in the radial direction with variations on the order of the grain size. Crack propagation in the cold worked microstructure was observed to be correlated with the direction of the elongated grains, resulting in a more tangential crack path with less local variation and a microstructure potentially more susceptible to iodine-induced stress corrosion cracking. 3D-EBSD using serial sectioning allows for the determination of the full five-parameter grain boundary description, and opens up the possibility of a statistical analysis of susceptible boundaries to SCC. Nanoscale secondary ion mass spectrometry (NanoSIMS) was also used to map the chemical distribution in the crack tip region and provides possible evidence of iodine segregation ahead of the crack tip. The results provide new insight into crack propagation mechanisms in recrystallised and cold worked microstructures, and pave the way for a more mechanistic understanding of crack propagation through advanced characterisation of iodine-induced stress corrosion cracks in zirconium alloys.

36 MATERIALS SCIENCE↗

Spall damage of a Ta particle-reinforced metallic glass matrix composite under high strain rate loading

We investigate deformation and damage of a Zr-based bulk metallic glass (BMG) and its Ta particle-reinforced composite (MGMC) under impact loading, as well as quasi-static tension for comparison. Yield strength, spall strength, and damage accumulation rate are obtained from free-surface velocity histories, and MGMC appears to be more damage-resistant. Scanning electron microscopy, electron back scattering diffraction and x-ray computed tomography, are utilized for characterizing microstructures, which show features consistent with macroscopic measurements. Different damage and fracture modes are observed for BMG and MGMC. Multiple well-defined spall planes are observed in BMG, while isolated and scattered cracking around reinforced particles dominates fracture of MGMC. Particle–matrix interface serves as the source and barrier to crack nucleation and propagation under both quasi-static and impact loading. Finally, deformation twinning and grain refinement play a key role in plastic deformation during shock loading but not in quasi-static loading. In addition, 3D cup-cone structures are resolved in BMG, but not in MGMC due to its heterogeneous stress field.

36 MATERIALS SCIENCE↗