Search NASA⌕ Search

SEARCH · Search NASA

Results for “Optimization methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Optimization of active control systems to suppress flutter and minimize turbulence response

A method for optimizing an active control system which will suppress flutter and minimize the response of a lifting surface to atmospheric turbulence is presented. A mathematical search method is developed which will find a control law which will cause an active control system to flutter at a specified freestream velocity, air density, and Mach number. With the flutter velocity of the system held constant, the control law is then modified in such a way that the peak output power spectral density function of the angular response of a lifting surface (as a result of atmospheric turbulence) is minimized for a specified flight velocity which is less than the flutter velocity. The von Karman generalized power spectrum for the transverse components of turbulence is used in an example problem to increase the flutter velocity and minimize the turbulence response of a simplified delta-wing model which has leading and trailing edge control surfaces.

Rudisill, C. S.↗
NASA NTRS1992

Fuel consumption in optimal control

A method has been developed for comparing three optimal control strategies based on fuel consumption. A general cost function minimization procedure was developed by applying two theorems associated with convex sets. Three cost functions associated with control saturation, pseudofuel, and absolute fuel are introduced and minimized. The first two cost functions led to the bang-bang and continuous control strategies, and the minimization of absolute fuel led to an impulsive strategy. The three control strategies were implemented on two elementary systems and a comparison of fuel consumption was made. The impulse control strategy consumes significantly less fuel than the continuous and bang-bang control strategies. This comparison suggests a potential for fuel savings in higher-order systems using impulsive control strategies. However, since exact solutions to fuel-optimal control for large-order systems are difficult if not impossible to achieve, the alternative is to develop near-optimal control strategies.

Redmond, Jim↗
NASA NTRS1991

Optimal discrete-time dynamic output-feedback design - A w-domain approach

An alternative method for optimal digital control design is described in this paper. The method is based on the usage of the w-transform and has many attractive design features. One of these is its immediate connection with frequency loop-shaping techniques that are now popular and effective for multivariable control synthesis in continuous-time domain. Furthermore, any design algorithms originally developed for continuous-time systems can now be immediately extended to the discrete-time domain. The main results presented in this paper are the exact problem formulation and solution of an optimal discrete-time dynamic output-feedback design in the w-domain involving a quadratic performance index to random disturbances. In addition, necessary conditions for optimality are obtained for the numerical solution of the optimal output-feedback compensator design. A numerical example is presented illustrating its application to the design of a low-order dynamic compensator in a stability augmentation system of a commercial transport.

Ha, Cheolkeun↗
NASA NTRS2017

Gravity-Assist Trajectories to the Ice Giants: An Automated Method to Catalog Mass- Or Time-Optimal Solutions

This work presents an automated method of calculating mass (or time) optimal gravity-assist trajectories without a priori knowledge of the flyby-body combination. Since gravity assists are particularly crucial for reaching the outer Solar System, we use the Ice Giants, Uranus and Neptune, as example destinations for this work. Catalogs are also provided that list the most attractive trajectories found over launch dates ranging from 2024 to 2038. The tool developed to implement this method, called the Python EMTG Automated Trade Study Application (PEATSA), iteratively runs the Evolutionary Mission Trajectory Generator (EMTG), a NASA Goddard Space Flight Center in-house trajectory optimization tool. EMTG finds gravity-assist trajectories with impulsive maneuvers using a multiple-shooting structure along with stochastic methods (such as monotonic basin hopping) and may be run with or without an initial guess provided. PEATSA runs instances of EMTG in parallel over a grid of launch dates. After each set of runs completes, the best results within a neighborhood of launch dates are used to seed all other cases in that neighborhood-allowing the solutions across the range of launch dates to improve over each iteration. The results here are compared against trajectories found using a grid-search technique, and PEATSA is found to outperform the grid-search results for most launch years considered.

Hughes, Kyle M.↗
NASA NTRS1975

Optimization of structures to satisfy aeroelastic requirements

A method for the optimization of structures to satisfy flutter velocity constraints is presented along with a method for determining the flutter velocity. A method for the optimization of structures to satisfy divergence velocity constraints is included.

Rudisill, C. S.↗
NASA NTRS2017

Economical Unsteady High-Fidelity Aerodynamics for Structural Optimization with a Flutter Constraint

Structural optimization with a flutter constraint for a vehicle designed to fly in the transonic regime is a particularly difficult task. In this speed range, the flutter boundary is very sensitive to aerodynamic nonlinearities, typically requiring high-fidelity Navier-Stokes simulations. However, the repeated application of unsteady computational fluid dynamics to guide an aeroelastic optimization process is very computationally expensive. This expense has motivated the development of methods that incorporate aspects of the aerodynamic nonlinearity, classical tools of flutter analysis, and more recent methods of optimization. While it is possible to use doublet lattice method aerodynamics, this paper focuses on the use of an unsteady high-fidelity aerodynamic reduced order model combined with successive transformations that allows for an economical way of utilizing high-fidelity aerodynamics in the optimization process. This approach is applied to the common research model wing structural design. As might be expected, the high-fidelity aerodynamics produces a heavier wing than that optimized with doublet lattice aerodynamics. It is found that the optimized lower skin of the wing using high-fidelity aerodynamics differs significantly from that using doublet lattice aerodynamics.

Bartels, Robert E.↗
NASA NTRS1991

Multidisciplinary optimization in aircraft design using analytic technology models

An approach to multidisciplinary optimization is presented which combines the Global Sensitivity Equation method, parametric optimization, and analytic technology models. The result is a powerful yet simple procedure for identifying key design issues. It can be used both to investigate technology integration issues very early in the design cycle, and to establish the information flow framework between disciplines for use in multidisciplinary optimization projects using much more computational intense representations of each technology. To illustrate the approach, an examination of the optimization of a short takeoff heavy transport aircraft is presented for numerous combinations of performance and technology constraints.

Malone, Brett↗
NASA NTRSDate not supplied

Towards Low-Noise Design of a Proprotor with the Vortex Lattice Method and Gradient-Based Optimization

This work aims to combine an aerodynamic model based on the unsteady vortex lattice method with an acoustic model provided by Farassat's formulation 1A to perform gradient-based optimizations of a proprotor with aerodynamic and acoustic constraints. The resulting combination of tools is applied to the problem of designing a single proprotor operating at a cruise condition, with and without an acoustic constraint and wing placed downstream of the proprotor rotation plane. Results are compared to a baseline design studied previously, and to similar optimizations performed with a simpler blade element momentum theory aerodynamic model. Each optimization case achieved feasibility and made significant improvements in the objective function, but the optimality criterion was not satisfied. Overall the designs the optimizer found roughly comported with our previous experience with similar problems, with some discrepancies that are discussed.

Aerodynamics↗
NASA NTRSDate not supplied

Towards Low-Noise Design of a Proprotor with the Vortex Lattice Method and Gradient-Based Optimization

This work aims to combine an aerodynamic model based on the unsteady vortex lattice method with an acoustic model provided by Farassat's formulation 1A to perform gradient-based optimizations of a proprotor with aerodynamic and acoustic constraints. The resulting combination of tools is applied to the problem of designing a single proprotor operating at a cruise condition, with and without an acoustic constraint and wing placed downstream of the proprotor rotation plane. Results are compared to a baseline design studied previously, and to similar optimizations performed with a simpler blade element momentum theory aerodynamic model. Each optimization case achieved feasibility and made significant improvements in the objective function, but the optimality criterion was not satisfied. Overall the designs the optimizer found roughly comported with our previous experience with similar problems, with some discrepancies that are discussed.

Aerodynamics↗
NASA NTRSDate not supplied

Low-Noise Propeller Design with the Vortex Lattice Method and Gradient-Based Optimization

This work aims to combine an aerodynamic model based on the unsteady vortex lattice method with an acoustic model provided by Farassat’s formulation 1A to perform gradient-based propeller optimizations with aerodynamic and acoustic constraints. Two optimization cases are attempted and successfully converged: an isolated propeller and a propeller-wing configuration, both operating in a 0.11 Mach freestream, representative of a cruise condition. The results show that simultaneously decreasing the RPM and increasing the collective angle of a propeller is an effective noise reduction technique, as expected, and little difference is observed between the two cases. A vortex dissipation model was found to be needed to stabilize the derivatives of the vortex lattice outputs, and a constraint on the propeller blade’s chord distribution concavity was needed to produce realistic-looking blade chord distributions.

Propellers↗
NASA NTRS1987

Alternative methods for calculating sensitivity of optimized designs to problem parameters

Optimum sensitivity is defined as the derivative of the optimum design with respect to some problem parameter, P. The problem parameter is usually fixed during optimization, but may be changed later. Thus, optimum sensitivity is used to estimate the effect of changes in loads, materials or constraint bounds on the design without expensive re-optimization. Here, the general topic of optimum sensitivity is discussed, available methods identified, examples given, and the difficulties encountered in calculating this information in nonlinear constrained optimization are identified.

Vanderplaats, G. N.↗
NASA NTRS1987

Shape design sensitivity analysis and optimization of three dimensional elastic solids using geometric modeling and automatic regridding

An automatic regridding method and a three dimensional shape design parameterization technique were constructed and integrated into a unified theory of shape design sensitivity analysis. An algorithm was developed for general shape design sensitivity analysis of three dimensional eleastic solids. Numerical implementation of this shape design sensitivity analysis method was carried out using the finite element code ANSYS. The unified theory of shape design sensitivity analysis uses the material derivative of continuum mechanics with a design velocity field that represents shape change effects over the structural design. Automatic regridding methods were developed by generating a domain velocity field with boundary displacement method. Shape design parameterization for three dimensional surface design problems was illustrated using a Bezier surface with boundary perturbations that depend linearly on the perturbation of design parameters. A linearization method of optimization, LINRM, was used to obtain optimum shapes. Three examples from different engineering disciplines were investigated to demonstrate the accuracy and versatility of this shape design sensitivity analysis method.

Yao, Tse-Min↗
NASA NTRS2000

Preliminary Design Optimization For A Supersonic Turbine For Rocket Propulsion

In this study, we present a method for optimizing, at the preliminary design level, a supersonic turbine for rocket propulsion system application. Single-, two- and three-stage turbines are considered with the number of design variables increasing from 6 to 11 then to 15, in accordance with the number of stages. Due to its global nature and flexibility in handling different types of information, the response surface methodology (RSM) is applied in the present study. A major goal of the present Optimization effort is to balance the desire of maximizing aerodynamic performance and minimizing weight. To ascertain required predictive capability of the RSM, a two-level domain refinement approach has been adopted. The accuracy of the predicted optimal design points based on this strategy is shown to he satisfactory. Our investigation indicates that the efficiency rises quickly from single stage to 2 stages but that the increase is much less pronounced with 3 stages. A 1-stage turbine performs poorly under the engine balance boundary condition. A portion of fluid kinetic energy is lost at the turbine discharge of the 1-stage design due to high stage pressure ratio and high-energy content, mostly hydrogen, of the working fluid. Regarding the optimization technique, issues related to the design of experiments (DOE) has also been investigated. It is demonstrated that the criteria for selecting the data base exhibit significant impact on the efficiency and effectiveness of the construction of the response surface.

Papila, Nilay↗
NASA NTRS1992

On options for interdisciplinary analysis and design optimization

The interdisciplinary optimization of engineering systems is discussed from the standpoint of the computational alternatives available to the designer. The analysis of such systems typically requires the solution of coupled systems of nonlinear algebraic equations. The solution procedure is necessarily iterative in nature. It is shown that the system can be solved by fixed point iteration, by Newton's method, or by a combination of the two. However, the need for sensitivity analysis may affect the choice of analysis solution method. Similarly, the optimization of the system can be formulated in several ways that are discussed in the paper. It is shown that the effect of the topology of the interaction between disciplines is a key factor in the choice of analysis, sensitivity and optimization methods. Several examples are presented to illustrate the discussion.

Haftka, R. T.↗
NASA NTRS1989

Parallel dynamic programming for on-line flight path optimization

Parallel systolic algorithms for dynamic programming(DP) and their respective hardware implementations are presented for a problem in on-line trajectory optimization. The method is applied to a model for helicopter flight path optimization through a complex constraint region. This problem has application to an air traffic control problem and also to a terrain following/threat avoidance problem.

Slater, G. L.↗
NASA NTRS1994

Advanced information processing system: Hosting of advanced guidance, navigation and control algorithms on AIPS using ASTER

This program demonstrated the integration of a number of technologies that can increase the availability and reliability of launch vehicles while lowering costs. Availability is increased with an advanced guidance algorithm that adapts trajectories in real-time. Reliability is increased with fault-tolerant computers and communication protocols. Costs are reduced by automatically generating code and documentation. This program was realized through the cooperative efforts of academia, industry, and government. The NASA-LaRC coordinated the effort, while Draper performed the integration. Georgia Institute of Technology supplied a weak Hamiltonian finite element method for optimal control problems. Martin Marietta used MATLAB to apply this method to a launch vehicle (FENOC). Draper supplied the fault-tolerant computing and software automation technology. The fault-tolerant technology includes sequential and parallel fault-tolerant processors (FTP & FTPP) and authentication protocols (AP) for communication. Fault-tolerant technology was incrementally incorporated. Development culminated with a heterogeneous network of workstations and fault-tolerant computers using AP. Draper's software automation system, ASTER, was used to specify a static guidance system based on FENOC, navigation, flight control (GN&C), models, and the interface to a user interface for mission control. ASTER generated Ada code for GN&C and C code for models. An algebraic transform engine (ATE) was developed to automatically translate MATLAB scripts into ASTER.

Brenner, Richard↗