Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASTICITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

The Effect of Carboxyl Group Content on Water Uptake Capacity and Tensile Properties of Functionalized Soy Protein-Based Superabsorbent Plastics

This manuscript studies the relation between macroscopic properties of the soy protein isolate (SPI)-based superabsorbent polymers (SAP) (e.g., water uptake capacity and tensile properties) and the extent of chemical modification conducted on the protein. The increase in the carboxyl group content, obtained from electrometric titrations, for acylated systems compared to native SPI brings with it an improvement in the protein hydrophilic character, as revealed by the determination of the water imbibing capacity. SEM images show that larger porous regions were developed in the acylated plastics. As for their mechanical properties, static tensile measurements indicated that acylated plastics with greater water uptake values display higher extensibility, compared to the reference sample. These natural-based SAP materials could be appropriate for applications in which maintaining the dimensional stability during service is not crucial (e.g. in agriculture and horticulture).

36 MATERIALS SCIENCE↗
DOE OSTI2019

Impact of Blend Proportion on the Miscibility and Thermal Characteristics of Synthetic Plastic-Derived Polypentapeptide with Commercially Available Polyvinyl Alcohol

Plastic-based polypeptides are versatile entities formed to conceive a broad range of scaffold biomaterials. They possess distinct, repetitive, hydrophobic sequences that confer conservation, reversibility, temperature-dependent self-association and dissociation properties. The repeating sequence of plastic-based peptides, poly(AVGVP) have been synthesized by the solution phase method and characterized by {sup 13}C and {sup 1}H-NMR spectroscopy. The intermolecular interactions between poly(AVGVP) and polyvinyl alcohol (PVA) was explored in solution and solid phase by diverse analytical methods. The interaction parameters, namely; α, β, µ and ∆[η]{sub m} obtained from the dilute solution viscometric approach, unveiled that the two polymers were miscible up to 40% of the polypeptide in the blends. Besides, Fourier transform infrared (FTIR) spectroscopy authenticated the formation of strong intermolecular hydrogen bonds connecting blend networks. Further, other analytical techniques such as DSC, SEM and XRD probes advocated the miscibility results. Thermogravimetric investigation of the blends confirmed the proportionate decrease of the thermal stability with the increase of polypentapeptide, attributable to the intermolecular amalgamation between the polypeptide and PVA. The blends and plain poly(AVGVP) degraded completely at about 700 °C, whereas the virgin PVA was about only 60% at this temperature. Graphic Abstract: .

36 MATERIALS SCIENCE↗
DOE OSTI2025

Root architectural plasticity optimizes nutrient acquisition in switchgrass under variable phosphorus forms

Aims Understanding the influence of different forms of phosphorus (P) over the different root traits and how those traits are related to increasing the efficiency of nutrient acquisition strategies. Methods Investigation of switchgrass (Panicum virgatum L.) root morphology responses to inorganic P (Pi) soluble (Potassium-P), insoluble (Aluminum-P), and organic P (Po) (Inositol Hexa-Phosphate, IHex-P) in rhizoboxes. Roots were traced over the root box and scanned using WinRhizoTM. The CRootbox model was employed to simulate root growth. Results Significant plasticity observed under IHex-P treatment, with a 46% increase in root branching, leading to a 74% rise in total root length and a 65% increase in root surface area compared to inorganic P forms. IHex-P resulted in a 73% higher root biomass than Aluminum-P and a 26% increase compared to Potassium-P. Most of the differences were attributed to the elongation of root branches. Conclusions Here, the study emphasizes the dynamic nature of switchgrass root architecture and morphology in response to varying P forms in the soil. The absence of Pi in the soil triggered increased plasticity in root traits, facilitating root access to Po and uptake of P. These findings offer valuable insights into the adaptive mechanisms of perennial plants, with significant implications for optimizing nutrient acquisition strategies in both agricultural and natural ecosystems.

Organic phosphorus↗
DOE OSTI2019

Formation of Plastic Inclusions in U71Mnk High-Speed Heavy-Rail Steel Refined by CaO-SiO{sub 2}-Al{sub 2}O{sub 3}-MgO Slag

To precisely control the characteristics of nonmetallic inclusions with high plasticity in U71Mnk high-speed heavy-rail steel deoxidized by Si and Mn, the chemical composition of CaO-SiO{sub 2}-Al{sub 2}O{sub 3}-MgO slag in the ladle furnace (LF) refining process was optimized by thermodynamic calculations. Relationships among the refining slag, nonmetallic inclusions, and elemental concentrations in the steels were analyzed to obtain the conditions for determining the optimal composition of refining slag. The optimal compositions and the component activities of CaO-SiO{sub 2}-Al{sub 2}O{sub 3}-MgO refining slag were determined and discussed according to calculations using FactSage 7.0. Finally, ten industrial experiments were performed. Variations in the compositions of LF refining slag, inclusions, and steel, as well as the sizes of the inclusions, and metallographic classification assessment of the U71Mnk steel product, were investigated and discussed to verify the feasibility and effectiveness of the optimized LF refining slag. Kinetics of steel–slag and steel-inclusion reactions during LF refining was studied and compared. The results show that to obtain low [O], [Al], and [S] contents and inclusions with high plasticity in molten steel, the optimal composition of the LF refining slag should be CaO: 44.2 to 51.7 wt pct, SiO{sub 2}: 41.4 to 47.0 wt pct, Al{sub 2}O{sub 3}: 0 to 4.7 wt pct and MgO 5.0 to 7.0 wt pct, where the basicity R is above 1.00 and the C/A ratio is above 9.00. After the LF refining process, the contents of total oxygen (T.O.), [Al], and [S] gradually stabilized in the range of 0.0008 to 0.0012 wt pct, 0.002 to 0.0028 wt pct and 0.0026 to 0.0037 wt pct, respectively. The densities of the three kinds of typical inclusions (CaO-SiO{sub 2}-Al{sub 2}O{sub 3}-MgO, MnS, and CaO-SiO{sub 2}-Al{sub 2}O{sub 3}-MgO-MnS) also decreased and reached approximately 0.25/mm{sup 2}, and no inclusion larger than 6.0 μm was found. The composition of the inclusions gradually changed into the optimal range in the CaO-SiO{sub 2}-Al{sub 2}O{sub 3}-MgO slag system during the LF refining process.

36 MATERIALS SCIENCE↗
DOE OSTI2018

An improved Armstrong–Frederick-Type Plasticity Model for Stable Cyclic Stress–Strain Responses Considering Nonproportional Hardening

This paper modified an Armstrong–Frederick-type plasticity model for investigating the stable cyclic deformation behavior of metallic materials with different sensitivity to nonproportional loadings. In the modified model, the nonproportionality factor and nonproportional cyclic hardening coefficient coupled with the Jiang–Sehitoglu incremental plasticity model were used to estimate the stable stress–strain responses of the two materials (1045HR steel and 304 stainless steel) under various tension–torsion strain paths. A new equation was proposed to calculate the nonproportionality factor on the basis of the minimum normal strain range. Procedures to determine the minimum normal strain range were presented for general multiaxial loadings. Then, the modified model requires only the cyclic strain hardening exponent and cyclic strength coefficient to determine the material constants. It is convenient for predicting the stable stress–strain responses of materials in engineering application. Comparisons showed that the modified model can reflect the effect of nonproportional cyclic hardening well.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Microstructural Characterization and High Strain Rate Plastic Flow Behavior of SMAW Armox500T Steel Joints from Spherical Indentation Experiments

Static indentation and uniaxial compression tests have been conducted on Armox500T steel and its weldments to predict the constraint factor (CF), i.e., ratio of Meyer’s hardness to uniaxial flow stress. Series of dynamic indentation experiments were carried out at impact velocities ranging from 5 to 300 m/s to estimate dynamic hardness as a function of average strain. Subsequently, dynamic indentation (DI) test data and CF determined under static indentation conditions have been used to study the high strain rate plastic flow behavior of Armox500T weldments in comparison with the base metal. It was observed that flow stress for Armox500T and its weldments under dynamic loading conditions (10{sup 4} s{sup −1}) are significantly higher than flow stress measured under static loading conditions (10{sup −3} s{sup −1}). The plastic flow behavior computed from DI is in good agreement with the data evaluated through conventional split Hopkinson pressure bar technique. Further, the study of the microstructure of base metal and weldments by optical microscopy and SEM revealed a considerable variation in the microstructure.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Effect of Strain Rate on the Plastic Deformation and Fracture of 90W-7Ni-3Fe Alloy Prepared by Liquid-Phase Sintering

In this study, the effect of the strain rates on the plastic deformation behavior and fracture mechanism of 90W-7Ni-3Fe heavy alloy prepared by liquid-phase sintering was investigated. Stress–strain tests were carried out in tensile and compression under quasi-static condition with the strain rate ranging from 10{sup −3} to 1 s{sup −1}. Dynamic test was examined using a compression split Hopkinson bar at strain rates ranging from 1000 to 1700 s{sup −1} in order to evaluate the effects of high strain rate on dynamic plastic deformation behavior. Quasi-static tests results show that the strength and hardness of this alloy increase with increasing strain rate. Results indicate that the as-sintered 90W-7Ni-3Fe heavy alloy has obvious strain-hardening characteristic under tensile or compression deformation under quasi-static condition. At this time, strain hardening is the main factor. Nevertheless, strain-hardening and strain-softening behaviors of the specimens occur simultaneously under dynamic compression condition. The effect of compressive stress on the work hardening is more obvious. A strong relevance of work-hardening effect on strain rate is also found. And the fracture mode of quasi-static and dynamic compression samples is also different.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Effect of Annealing on the Impact Resistance and Fracture Mechanism of PNC-60 Sinters After Cold Plastic Deformation

Compaction of sintered metal powders by free upsetting at room temperature dangerously reduces their plastic properties, particularly the fracture toughness. The reason for the occurrence of two unfavorable phenomena accompanying this deformation route is sought. The first phenomenon depends on the initial porosity of the preform and the amount of cold work resulting in the destruction of bonds and violation of continuity between sintered powder particles. The second phenomenon is the deformation of the metal matrix, which reduces the plasticity of the sintered product. To correctly assess the effect of changes occurring in the matrix as a result of deformation, it is necessary to use the properly defined sintered matrix hardening parameter discussed in this study. The adverse effects of cold forming can be eliminated by annealing the deformed sinters at a temperature below the sintering point and above the recrystallization temperature. The annealing temperature causes favorable changes in the structure and increases the impact resistance of the deformed sinters depending on the degree of deformation of the sintered matrix and the initial porosity of the preform. Annealing at a properly selected temperature restores the ductility of the metal matrix and improves the integrity of the sintered material impaired by the effect of deformation. Annealing also causes favorable changes in the porosity morphology, removing defects in the form of gaps and resulting in the spheroidization of voids. With an appropriately selected initial porosity and degree of deformation, subsequent annealing of sinters compacted by free cold upsetting provides products with strength properties comparable to sinters with the same density and subjected to single compaction and sintering but with considerably higher fracture toughness.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Effect of Stress States on Twinning Behavior in Twinning-Induced Plasticity Steel

The effects of stress state on the twin structures and kinetics in twinning-induced plasticity (TWIP) steel have been investigated to understand the twinning behaviors in more detail. Twinning behaviors of tension, compression, wire drawing, and caliber rolling were evaluated and compared using the EBSD technique, TEM measurement, and Schmid factor analysis. Twin structures, such as twin thickness, twin variant, twin shape, and twin kinetics were different with stress states. The specimen under compressive stress had wavy-shaped twins, less twin variant, lower twin thickness, and more twin volume fraction in comparison with the specimen under tensile stress. The different structures and kinetics of deformation twin with stress state were highly related to the grain rotation during plastic deformation. Under tensile stress, the grain rotation to <111> orientation, twinning-favored regions by Schmid factor analysis, encouraged the lateral growth of twins, more twin variants, and straight-type twins, while the grain rotation to <110> orientation under compressive stress suppressed the twin growth and twin variant and developed wavy-shaped twins. Drawn wire and caliber-rolled wire had both twin features under tensile and compressive stress states and higher twin volume fraction since complex stress state that combined tension and compression was applied in these processes. The hardness values were strongly related to the twin volume fraction with strain and stress state.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Transformation-induced plasticity in bulk metallic glass composites evidenced by in-situ neutron diffraction

Transformation-induced plasticity in a strain-softening amorphous matrix consisting of austenite B2 phase was studied by in-situ neutron diffraction, coupled with molecular dynamic simulation. It was found that the martensitic transformation from B2 to B19' upon loading commenced at the macroscopic yielding which increased with the decrease of the fraction of the parent austenite B2 phase, and the threshold lattice strain for the martensitic transformation is almost the same in different samples, suggesting that the martensitic transformation in the current glassy matrix is strain-controlled. Analysis of load partition and strain accommodation unveiled that B2 has elastic anisotropy, and the desirable elastic match between B2 and the amorphous matrix ensures a good cooperative deformation. Additionally, molecular dynamic simulation revealed that atoms at the interface between B2 and the amorphous matrix deviated from the standard B2 lattices and acted as nucleation site for the martensitic transformation, eventually giving rise to the strain-controlled martensitic transformation. Our findings provide new insights into the mechanism of phase transformation-mediated plasticity at the microscopic level, and have useful implications for developing novel, high-performance bulk metallic glass composites.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Thermomechanical conversion in metals: dislocation plasticity model evaluation of the Taylor-Quinney coefficient

Using a partitioned-energy thermodynamic framework which assigns energy to that of atomic configurational stored energy of cold work and kinetic-vibrational, in this study we derive an important constraint on the Taylor-Quinney coefficient, which quantifies the fraction of plastic work that is converted into heat during plastic deformation. Associated with the two energy contributions are two separate temperatures – the ordinary temperature for the thermal energy and the effective temperature for the configurational energy. We show that the Taylor-Quinney coefficient is a function of the thermodynamically defined effective temperature that measures the atomic configurational disorder in the material. Finite-element analysis of recently published experiments on the aluminum alloy 6016-T4 [1], using the thermodynamic dislocation theory (TDT), shows good agreement between theory and experiment for both stress-strain behavior and temporal evolution of the temperature. The simulations include both conductive and convective thermal energy loss during the experiments, and significant thermal gradients exist within the simulation results. Computed values of the differential Taylor-Quinney coefficient are also presented and suggest a value which differs between materials and increases with increasing strain.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Role of interfaces on phase formation during severe plastic deformation

The role of interfaces on phase formation during severe plastic deformation (SPD) was investigated using molecular dynamics simulations. It is found that dilute solute additions that segregate to interphase boundaries, and strengthen them, can greatly extend the solubility limits of the bounding phases at steady state, providing a novel approach to processing nanocomposite alloys by SPD. Here, the results are rationalized in terms of a modified effective temperature model, whereby increasing the interface strength leads to higher effective temperatures and correspondingly to higher solubilities. Comparison of the segregation coefficient at the interphase boundary with solubilities in the bounding phases illustrates the effective temperature model is self-consistent and comprehensive. Past experimental studies on severe plastic deformation are found consistent with these observations.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Unraveling kinking: A plasticity enhancing failure mode in high strength nano metallic laminates

Kinking is an important and plasticity-enhancing deformation/failure mode in numerous mechanically anisotropic materials including high-strength nano metallic laminates (NMLs). However, our current limited understanding of the mechanics of kinking and its dependence on microstructural attributes is insufficient for thoroughly comprehending and eventually being able to control failure behaviors of materials. In this study, we investigate kinking dependencies on microstructural attributes in NMLs via in situ micropillar compression, multiscale microstructure characterization, dislocation dynamic simulations, and crystal plasticity modeling. Additionally, by examining several NML systems (Cu/Fe, Ag/Fe, Al-4Mg/Fe), we demonstrate that the development of internal stresses during loading activates local layer-parallel glide triggering kinking in NMLs. Furthermore, this work reveals the effect of key microstructural features including layer thickness, layer waviness, interface barrier strength, and work hardening capacity on kink band formation in NMLs. More broadly, our efforts represent a generically applicable approach for probing large-strain deformation behavior of complex materials via synergetic modeling and experimental efforts.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Influence of fluorescent dopants on the vat photopolymerization of acrylate-based plastic scintillators for application in neutron/gamma pulse shape discrimination

Plastic scintillators, a class of solid-state materials used for radiation detection, were additively manufactured with vat photopolymerization. The photopolymer resins consisted of a primary dopant and a secondary dopant dissolved in a bisphenol A ethoxylate diacrylate-based matrix. The absorptive dopants significantly influence important print parameters, for example, secondary dopants decrease the light penetration depth by a factor > 12×. The primary dopant 2,5-diphenyloxazole had minimal impact on the printing process even when loaded at 25 % by mass of the resin. Working curve measurements, which relate energy dose to cure depth, were performed as a function of feature size to further assess the influence of dopants. Photopatterns smaller than 150 µm width had apparent increases in critical energy dose compared to larger photopatterns, while all resins maintained printed features in line gratings with 50 µm of separation. Printed scintillator monoliths were compared to scintillators cast by traditional molding, demonstrating that the layer-by-layer printing process does not decrease scintillation response. In conclusion, a maximum light output of 31 % of a benchmark plastic scintillator (EJ-200) and successful pulse shape discrimination were achieved with 20 % by mass 2,5-diphenyloxazole as the primary dopant and 0.1 % by mass 9,9-dimethyl-2,7-distyrylfluorene as the secondary dopant in printed scintillator samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Effect of plasticity on the experimental characterization of the creep property of a cement paste: Spherical vs. conical microindentation

Microindentation is today a powerful tool for rapidly characterizing the elastic modulus and the logarithmic basic creep of a cement paste. However, a theoretical work proved that a microindentation test with a sharp indenter shape involves stress concentration and delayed plasticity which can cause an overestimation of the estimated creep property. This work aims at experimentally investigating the effect of the shape indenter on the identification of the visco-elastic property of a cement paste by microindentation. First, several microindentation grids were carried out on a cement paste with both a Berkovich indenter and a spherical indenter at different penetration depths or load levels for load control (creep) tests or displacement control (relaxation) tests, respectively. As for a visco-elastic material the duality principle between creep and relaxation holds, a numerical method was developed for predicting the relaxation response from the assumed logarithmic creep compliance. The present results show that only spherical microindentation satisfy the duality principle for which creep and relaxation response can be predicted by a unique logarithmic creep compliance function. Finally, spherical microindentation creep tests at low load as well as spherical microindentation relaxation tests provide a greater indentation modulus M and contact creep modulus C{sub v} as likely less affected by possible plasticity effects.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Plastic-waste hydrogenolysis over two-dimensional MXene-supported ruthenium catalysts with tunable interlayer spacing

The hydrogenolysis of plastics is limited by active-site inaccessibility and inefficient mass transport of bulky polymer chains. To overcome these challenges, this work developed two-dimensional MXene-supported Ru (Ru@MXene) catalysts. Lyophilization of a solution containing dispersed MXene sheets and Ru precursors enabled the confinement of Ru species within the MXene interlayers, which act as pillars to expand the interlayer spacing. Building on this, a silica-pillared MXene-supported Ru (Ru@P-MXene) with even larger interlayer spacing exhibited a reaction rate of 914.9 g C5–C35 g Ru –1 h –1 for the hydrogenolysis of low-density polyethylene (LDPE) into valuable liquid chemicals (e.g., C 5 –C 35 ). A comparison of product yields between Ru@P-MXene and Ru@MXene suggests that elongated Ru particles confined within the MXene support expose their side facets for the reaction. In conclusion, this work demonstrates a new application of MXene in thermochemical catalysis, offering a solution to the challenges of active-site accessibility, mass transport, and reaction confinement in chemical plastic upcycling.

2D materials↗
DOE OSTI2016

A return mapping algorithm for isotropic and anisotropic plasticity models using a line search method

The numerical integration of constitutive models in computational solid mechanics codes allows for the solution of boundary value problems involving complex material behavior. Metal plasticity models, in particular, have been instrumental in the development of these codes. Here, most plasticity models implemented in computational codes use an isotropic von Mises yield surface. The von Mises, of J 2 , yield surface has a simple predictor-corrector algorithm - the radial return algorithm - to integrate the model.

36 MATERIALS SCIENCE↗