Search NASA⌕ Search

SEARCH · Search NASA

Results for “POINT DEFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Early Results from GLASS-JWST. II. NIRCam Extragalactic Imaging and Photometric Catalog

We present the reduced images and multiwavelength catalog of the first JWST NIRCam extragalactic observations from the GLASS Early Release Science Program, obtained as coordinated parallels of the NIRISS observations of the Abell 2744 cluster. Images in seven bands (F090W, F115W, F150W, F200W, F277W, F356W, and F444W) have been reduced using an augmented version of the official JWST pipeline; we discuss the procedures adopted to remove or mitigate defects in the raw images. We obtain a multiband catalog by means of forced aperture photometry on point-spread function (PSF)-matched images at the position of F444W-detected sources. The catalog is intended to enable early scientific investigations, and it is optimized for faint galaxies; it contains 6368 sources, with limiting magnitude 29.7 at 5 σ in F444W. We release both images and catalog in order to allow the community to become familiar with the JWST NIRCam data and evaluate their merit and limitations given the current level of knowledge of the instrument.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2003

Switching Oxide Traps

We consider radiation-induced charge trapping in SiO2 dielectric layers, primarily from the point of view of CMOS devices. However, SiO2 insulators are used in many other ways, and the same defects occur in other contexts. The key studies, which determined the nature of the oxide charge traps, were done primarily on gate oxides in CMOS devices, because that was the main radiation problem in CMOS at one time. There are two major reviews of radiation-induced oxide charge trapping already in the literature, which discuss the subject in far greater detail than is possible here. The first of these was by McLean et al. in 1989, and the second, ten years later, was intended as an update, because of additional, new work that had been reported. Basically, the picture that has emerged is that ionizing radiation creates electron-hole pairs in the oxide, and the electrons have much higher mobility than the holes. Therefore, the electrons are swept out of the oxide very rapidly by any field that is present, leaving behind any holes that escape the initial recombination process. These holes then undergo a polaron hopping transport toward the Si/SiO2 interface (under positive bias). Near the interface, some fraction of them fall into deep, relatively stable, long-lived hole traps. The nature and annealing behavior of these hole traps is the main focus of this paper.

Oldham, Timothy R.↗
NASA NTRS2023

Leveraging Automated Fiber Placement Computer Aided Process Planning Framework for Defect Validation and Dynamic Layup Strategies

Process planning represents an essential stage of the Automated Fiber Placement (AFP) workflow. It develops useful and efficient machine processes based upon the working material, composite design, and manufacturing resources. The current state of process planning requires a high degree of interaction from the process planner and could greatly benefit from increased automation. Therefore, a list of key steps and functions are created to identify the more difficult and time-consuming phases of process planning. Additionally, a set of metrics must exist by which to evaluate the effectiveness of the manufactured laminate from the machine code created during the Process Planning stage. Layup strategies, in addition to dog ears, stagger shifts, steering constraints, and starting points, represented the group of functions labeled as process optimization and ranked the highest in terms of priority for automation. The laminates resulting from the selected parameters are evaluated through the occurrences of principal defect metrics such as fiber gaps, overlaps, angle deviation and steering violations. This document presents an automated software solution to the layup strategy and starting point selection phase of process planning. A series of ply scenarios are generated with variations of these ply parameters and evaluated according to a set of metrics entered by the Process Planner. These metrics are generated through use of the Analytical Hierarchy Process (AHP), where relative importance between each of the fiber features are defined. The ply scenarios are selected which reduce the overall fiber feature scores based on the defects the Process Planner wishes to minimize.

HiCAM↗
DOE OSTI2020

Investigating Core Gaps and the Development of Subcomponent Validation Methods for Wind Turbine Blades: Preprint

Core gaps are a common manufacturing defect observed in wind blade composite sandwich constructions, which occur when sheets of core material are not properly butted up against each other in the mold. The aim of this study was to characterize core gaps in composite sandwich constructions at the coupon scale. This was to gain an initial understanding of the defect before developing appropriate methodologies for more complex subcomponents as part of a much broader wind blade structural validation and damage tolerance program. Long beam flexure in 4-point-bending was chosen as the most appropriate loading scenario. Beam specimens were characterized with and without 10 mm core gaps in fiberglass/balsa sandwich beams. The core gaps were characterized with two separate resin systems; a Hexion epoxy and Arkema's Elium resins system (a novel, infusible thermoplastic). Results showed that the Elium beams without the core gaps were had a 15% lower static strength than their epoxy counterparts. The introduction of the core gap to the epoxy beams reduced their static strength by 35%. The Elium beams, however, exhibited negligible strength reductions with the inclusion of the core gap. Overall, this characterization study provided pertinent information with regards to core gaps as a manufacturing defect to allow for continued development of damage tolerance and subcomponent validation methodologies with the inclusion of manufacturing defects.

17 WIND ENERGY↗
DOE OSTI2020

Persistent and reversible electrostatic control of doping in graphene/hexagonal boron nitride heterostructures

Since its first application as a substrate for graphene field effect transistors (FETs), hexagonal boron nitride (hBN) has become a prominent component in two-dimensional (2D) material devices. In addition, hBN has been shown to host defects that can be manipulated to change the electronic properties of adjacent 2D materials. Despite the wide use of such defect manipulations, no focused efforts have been made to further the understanding of defect excitations and their influence in graphene/hBN FETs. In this study, we explore the effect of high electric fields (~10 V/nm) on graphene/hBN FETs and find that persistent and reversible shifts in graphene's charge neutrality point (CNP) occur. By increasing the applied electric field and temperature of our device, we find that this CNP shift is enhanced. With this insight, we propose a mechanism that explains these observations based on Poole–Frenkel emissions from defects in hBN. Finally, we show that such an effect may be suppressed by using graphite as a backgate, thus preventing unintended changes in the electrical properties of graphene/hBN FETs.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Advanced Materials and Manufacturing Technologies Nondestructive Examination Efforts at Idaho National Laboratory: Report of FY-24 Efforts

This report details FY-24 nondestructive examination (NDE) efforts at Idaho National Laboratory (INL) in support of the Advanced Materials and Manufacturing Technologies (AMMT) program. While the goal of this endeavor is to develop a multi-modal, multi-length scale workflow for nondestructive characterization of advanced manufactured (AM) nuclear reactor components, substantial development remains until this is a reality. In support of this effort X-ray computed tomography (XCT), X-ray diffraction (XRD), neutron computed tomography (nCT), neutron diffraction, lock-in thermography (LIT), multi-point lock-in thermography (MLIT), and positron annihilation spectroscopy (PAS) were all used on AM specimens to examine defects such as voids, porosity, and residual stress. In addition to summarizing the results of these NDE applications, recommendations for integrating these into a more comprehensive undertaking to promote NDE of engineering-scale components are also included.

36 MATERIALS SCIENCE↗
NASA NTRS1993

Quartz dissolution. I - Negative crystal experiments and a rate law. II - Theory of rough and smooth surfaces

The range of the measured quartz dissolution rates, as a function of temperature and pOH, extent of saturation, and ionic strength, is extended to cover a wider range of solution chemistries, using the negative crystal methodology of Gratz et al. (1990) to measure the dissolution rate. A simple rate law describing the quartz dissolution kinetics above the point of zero charge of quartz is derived for ionic strengths above 0.003 m. Measurements were performed on some defective crystals, and the mathematics of step motion was developed for quartz dissolution and was compared with rough-face behavior using two different models.

Gratz, Andrew J.↗
NASA NTRS2003

Experimental Evaluation of Verification and Validation Tools on Martian Rover Software

To achieve its science objectives in deep space exploration, NASA has a need for science platform vehicles to autonomously make control decisions in a time frame that excludes intervention from Earth-based controllers. Round-trip light-time is one significant factor motivating autonomy capability, another factor is the need to reduce ground support operations cost. An unsolved problem potentially impeding the adoption of autonomy capability is the verification and validation of such software systems, which exhibit far more behaviors (and hence distinct execution paths in the software) than is typical in current deepspace platforms. Hence the need for a study to benchmark advanced Verification and Validation (V&V) tools on representative autonomy software. The objective of the study was to access the maturity of different technologies, to provide data indicative of potential synergies between them, and to identify gaps in the technologies with respect to the challenge of autonomy V&V. The study consisted of two parts: first, a set of relatively independent case studies of different tools on the same autonomy code, second a carefully controlled experiment with human participants on a subset of these technologies. This paper describes the second part of the study. Overall, nearly four hundred hours of data on human use of three different advanced V&V tools were accumulated, with a control group that used conventional testing methods. The experiment simulated four independent V&V teams debugging three successive versions of an executive controller for a Martian Rover. Defects were carefully seeded into the three versions based on a profile of defects from CVS logs that occurred in the actual development of the executive controller. The rest of the document is structured a s follows. In section 2 and 3, we respectively describe the tools used in the study and the rover software that was analyzed. In section 4 the methodology for the experiment is described; this includes the code preparation, seeding of defects, participant training and experimental setup. Next we give a qualitative overview of how the experiment went from the point of view of each technology; model checking (section 5), static analysis (section 6), runtime analysis (section 7) and testing (section 8). The find section gives some preliminary quantitative results on how the tools compared.

Brat, Guillaume↗
NASA NTRS1991

Incoherent vs. coherent behavior in the normal state of copper oxide superconductors

The self-consistent quantum fluctuations around the mean-field Hartree-Fock state of the Hubbard model provide a very good description of the ground state and low temperature properties of a 2-D itinerant antiferromagnet. Very good agreement with numerical calculations and experimental data is obtained by including the one- and two-loop spin wave corrections to various physical quantities. In particular, the destruction of the long-range order above the Neel temperature can be understood as a spontaneous generation of a length-scale epsilon(T), which should be identified as the spin correlation length. For finite doping, the question of the Hartree-Fock starting point becomes a more complex one since an extra hole tends to self-trap in antiferromagnetic background. Such quantum defects in an underlying antiferromagnetic state can be spin-bags or vortex-like structures and tend to suppress the long-range order. If motion of the holes occurs on a time-scale shorter than the one associated with the motion of these quantum defects of a spin background, one obtains several important empirical features of the normal state of CuO superconductors like linear T-dependence of resistivity, the cusp in the tunneling density of states, etc. As opposed to a familiar Fermi-liquid behavior, the phenomenology of the above system is dominated by a large incoherent piece of a single hole propagator, resulting in many unusual normal state properties.

Tesanovic, Zlatko↗
DOE OSTI2020

A mechanism-based quantitative multi-scale framework for investigating irradiation hardening of tungsten at low temperature

We present the development and validation of a mechanism-based multi-scale modeling framework to quantitatively link the irradiation defect evolution kinetics at the microscopic scale to the macroscopic yield strength and flow stress evolution of tungsten irradiated at low temperature (0.08 < T/T m < 0.18, where T m is the melting point and is equal to 3673 K). The mechanism-based strength model, proposed as the superposition of thermal softening and modified dispersed barrier hardening, is developed to understand the underlying strengthening mechanisms. The thermal softening exponent as defined in the Johnson-Cook model is obtained by fitting unirradiated yield strength at different temperatures. A set of irradiation-induced defect kinetics equations with the thermodynamics parameters derived from the atomic calculations reported in the literature is used to determine the densities and sizes of defect clusters at the meso-scale, and the predicted irradiation damage characteristics are in reasonable quantitative agreement with experimental data from literature. The effects of irradiation condition (temperature and irradiation dose) and test temperature on yield strength are quantitatively predicted and compared with experimental measurements from the literature. Here, the predicted irradiation hardening and strain hardening are compared with experimental data as model validation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Graph identification of proteins in tomograms ( GRIP‐Tomo )

Abstract In this study, we present a method of pattern mining based on network theory that enables the identification of protein structures or complexes from synthetic volume densities, without the knowledge of predefined templates or human biases for refinement. We hypothesized that the topological connectivity of protein structures is invariant, and they are distinctive for the purpose of protein identification from distorted data presented in volume densities. Three‐dimensional densities of a protein or a complex from simulated tomographic volumes were transformed into mathematical graphs as observables. We systematically introduced data distortion or defects such as missing fullness of data, the tumbling effect, and the missing wedge effect into the simulated volumes, and varied the distance cutoffs in pixels to capture the varying connectivity between the density cluster centroids in the presence of defects. A similarity score between the graphs from the simulated volumes and the graphs transformed from the physical protein structures in point data was calculated by comparing their network theory order parameters including node degrees, betweenness centrality, and graph densities. By capturing the essential topological features defining the heterogeneous morphologies of a network, we were able to accurately identify proteins and homo‐multimeric complexes from 10 topologically distinctive samples without realistic noise added. Our approach empowers future developments of tomogram processing by providing pattern mining with interpretability, to enable the classification of single‐domain protein native topologies as well as distinct single‐domain proteins from multimeric complexes within noisy volumes.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Controlling the charge of dust particles in an afterglow by modulating the plasma power

Abstract A dust particle immersed in a glow-discharge plasma has long been known to have a charge that is negative , while the plasma is powered. However, in the afterglow, following the stopping of the plasma power, a large positive charge can collect on the particle, as was shown recently for particles in a cathodic sheath. While that outcome of positive charging in the afterglow may be common, an experimental discovery reported here reveals that the opposite outcome is also possible: a particle can develop a negative charge in the afterglow, if the plasma had previously been operated with a modulated power. Before stopping the plasma power off altogether, in a run with power modulated at a low duty cycle of 4.5 % , the particle’s residual charge was negative, but it was positive in a control run without modulation. This result points to a way of controlling the charge of dust particles in a decaying plasma, which can be useful for mitigating defects in semiconductor manufacturing.

Physics↗
DOE OSTI2023

Experiences Detecting Defective Hardware in Exascale Supercomputers

In May 2022, the newest supercomputer to top the TOP 500 list was Frontier at Oak Ridge National Laboratory, demonstrating the capability of computing more than 1.1 quintillion (1018) floating-point calculations every second. Driving this ground-breaking rate of computing is Frontier’s more than 37,000 graphics processing units (GPUs) and 9,408 central processing units (CPUs). In total, Frontier contains more than 60 million parts. At this scale, the smallest margin of error may generate hundreds of hardware errors across the system. These errors are capable of directly hindering world-class science performed on Frontier if not found. In this work, we describe and evaluate two strategies for finding hardware-level faults in Frontier’s 9,408 compute nodes. There are two strategies developed: the first uses the Slurm scheduler to scavenge available compute time to run the node screen, the second builds upon the lessons learned in the first strategy and enforces a weekly screen of each node. Using June 2023 as a case study, we find that the first scheduling strategy consumed more than ten times the resources as the second scheduling strategy, but successfully detected five hardware defects in Frontier. We summarize the lessons learned while developing and running a node screen on the world’s first exascale supercomputer.

Hagerty, Nick↗
DOE OSTI2022

The effect of elastic anisotropy on the symmetry selection of irradiation-induced void superlattices in cubic metals

We report self-organized microstructures and patterns have been widely observed in non-equilibrium physical systems. In particular, irradiation in metals creates far-from-equilibrium environments, in which the competing dynamics of defect production and annihilation can lead to unique self-organized superlattice structures, e.g., void and gas bubble superlattices. From a physical point of view, the superlattice structures are dictated by the intrinsic symmetry breaking in the metals, i.e., anisotropy caused by the breaking of continuous rotational symmetry. In the literature, two distinctive anisotropies, elastic anisotropy and diffusion anisotropy of interstitials, have been proposed to be the origins of superlattice formation. However, it is still unclear which anisotropy dominates the symmetry selection of superlattice structures. In this paper, we study elastic anisotropy and its effect on the symmetry of void superlattices. By using theoretical analyses and phase field simulations, we show that elastic anisotropy in cubic metals can lead to either face-centered cubic or simple cubic superlattices depending on the Zener anisotropy ratio. The superlattices formed under this elastic anisotropy mechanism must form under the influence of spinodal decomposition, as the mechanism requires perturbations in the vacancy concentration field to develop into spatially-static concentration waves. We compare to existing work on symmetry selection in superlattices via diffusion anisotropy and to experimental observations, and we suggest that concentration wave development under the influence of elastic anisotropy is not the mechanism for symmetry selection during the formation of irradiation-induced void superlattices, but that diffusion anisotropy could be the dominant mechanism.

36 MATERIALS SCIENCE↗
NASA NTRS1987

Investigation of the acoustic properties of composite materials

An effort to provide inspection of the bondlines in the Space Shuttle Solid Rocket Motor (SRM) is discussed. Investigation of the bondlines in the membrane region of the SRM has centered on representative samples provided by Morton Thiokol. These samples have pull-tabs, or in one case grafoil inserts, to simulate delaminations at various points in the multilayer structure of steel case, liner, insulation, liner, and propellant. Discussed here is the continuing approach to examining these defects which is predicated on a model of an ultrasonic wave propagating in a lossy multilayer resonant structure, the experimental arrangements used, and the results of these experiments.

Smith, B. T.↗
NASA NTRS2010

Wavefront Sensing of X-Ray Telescopes

Phase Retrieval analysis of off-axis or defocused focal-plane data from telescope optics has been proven effective in understanding misalignments and optical aberrations in normal incidence telescopes. The approach is used, e.g., in commissioning of the James Webb Space Telescope (JWST) segmented primary mirror. There is a similar need for evaluating low-order figure errors of grazing incidence mirrors and nested telescope assemblies. When implemented in these systems, phase retrieval does not depend on normal incidence access to each mirror (shell) surface and, therefore, provides an effective means for evaluating nested x-ray telescopes during integration and test. We have applied a well-known phase retrieval algorithm to grazing incidence telescopes. The algorithm uses the Levenberg-Marquardt optimization procedure to perform a non-linear least-squares fit of the telescope Point Spread Function (PSF). The algorithm can also retrieve low order figure errors at visible wavelengths where optical diffraction is the dominant defect in the PSF. In this paper we will present the analytical approach and its implementation for grazing incidence mirrors of the International X-Ray Observatory (IXO). We analyze the effects of low order axial surface errors individually, and in combination on the system PSF at 633 nanometers. We demonstrate via modeling that the wavefront sensing algorithm can recover axial errors (of the grazing incidence mirrors) to a small fraction of the known axial figure errors using simulated PSFs as input data to the algorithm.

Saha, Timo↗
NASA NTRS1995

Ball bearing vibrations amplitude modeling and test comparisons

Bearings generate disturbances that, when combined with structural gains of a momentum wheel, contribute to induced vibration in the wheel. The frequencies generated by a ball bearing are defined by the bearing's geometry and defects. The amplitudes at these frequencies are dependent upon the actual geometry variations from perfection; therefore, a geometrically perfect bearing will produce no amplitudes at the kinematic frequencies that the design generates. Because perfect geometry can only be approached, emitted vibrations do occur. The most significant vibration is at the spin frequency and can be balanced out in the build process. Other frequencies' amplitudes, however, cannot be balanced out. Momentum wheels are usually the single largest source of vibrations in a spacecraft and can contribute to pointing inaccuracies if emitted vibrations ring the structure or are in the high-gain bandwidth of a sensitive pointing control loop. It is therefore important to be able to provide an a priori knowledge of possible amplitudes that are singular in source or are a result of interacting defects that do not reveal themselves in normal frequency prediction equations. This paper will describe the computer model that provides for the incorporation of bearing geometry errors and then develops an estimation of actual amplitudes and frequencies. Test results were correlated with the model. A momentum wheel was producing an unacceptable 74 Hz amplitude. The model was used to simulate geometry errors and proved successful in identifying a cause that was verified when the parts were inspected.

Hightower, Richard A., III↗