Search NASA⌕ Search

SEARCH · Search NASA

Results for “Point defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Effects of high energy x ray and proton irradiation on lead zirconate titanate thin films' dielectric and piezoelectric response

The effects of irradiation by X rays and protons on the dielectric and piezoelectric response of highly (100)-textured polycrystalline Pb(Zr{sub x}Ti{sub 1-x})O{sub 3} (PZT) thin films have been studied. Low-field dielectric permittivity, remanent polarization, and piezoelectric d{sub 33,f} response all degraded with exposure to radiation, for doses higher than 300 krad. At first approximation, the degradation increased at higher radiation doses, and was stronger in samples exposed to X rays, compared to the proton-irradiated ones. Nonlinear and high-field dielectric characterization suggest a radiation-induced reduction of the extrinsic contributions to the response, attributed to increased pinning of the domain walls by the radiation-induced point defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Study on Passive and Electrochemical Response of Pure Nickel in Borate Buffer Solutions: Effect of Cold Deformation

In the present work, influences of the cold deformation on electrochemical and passive response of pure nickel in three solutions with adjusted pH values of 8.5, 9.0, and 9.5 at 298 ± 1 K (25 ± 1 °C) were investigated. A cold deformation process was applied by means of cold rolling. Implementation of the cold deformation process resulted in samples having a finer microstructure. Also, the cold work and grain refinement led to increased hardness. In addition, open-circuit potential and potentiodynamic polarization tests were performed and results showed that corrosion current density was reduced by applying the cold deformation. Moreover, the results of the electrochemical impedance spectroscopy and Mott–Schottky analyses indicated higher corrosion resistance of pure nickel after cold deformation. This behavior is attributed to the growth of much thicker, with less point defects, passive layer on the surface of cold-deformed samples.

36 MATERIALS SCIENCE↗

Stress enhanced diffusion of krypton ions in polycrystalline titanium

An experimental investigation on the mutual influence of pre-existing residual stress and point defect following ion implantation is presented. The study has been carried out using polycrystalline titanium samples energetically implanted with krypton ions at different fluences. Ion beam analysis was used to determine the concentration profile of the injected krypton ions, while synchrotron X-ray diffraction has been used for stress determination. Ion beam analysis and synchrotron X-ray diffraction stress profile measurements of the implanted titanium samples show a clear evidence of stress-enhanced diffusion of krypton ions in titanium. It is further observed that for the titanium samples implanted at low fluence, ion implantation modifies the pre-existing residual stress through the introduction of point and open volume defects. The stress fields resulting from the ion implantation act to drift the krypton inclusions towards the surface of titanium.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Correlation between switching to n-type conductivity and structural defects in highly Mg-doped InN

The effect of Mg doping on the microstructure of InN epitaxial films in relation to their free-charge carrier properties has been investigated by transmission electron microscopy (TEM) and aberration corrected scanning TEM. We observe a direct correlation between Mg concentration and the formation of stacking faults. The threading dislocation density is found to be independent of Mg concentration. The critical Mg concentration for the on-set of stacking faults formation is determined and found to correlate with the switch from p- to n-type conductivity in InN. Potential mechanisms involving stacking faults and point defect complexes are invoked in order to explain the observed conductivity reversal. Finally, the stacking faults are structurally determined and their role in the reduction of the free electron mobility in highly doped InN:Mg is discussed.

36 MATERIALS SCIENCE↗

Microwave-assisted low temperature synthesis of wurtzite ZnS quantum dots

In this work we report, for the first time, on microwave assisted synthesis of wurtzite ZnS quantum dots (QDs) in controlled reaction at temperature as low as 150 Degree-Sign C. The synthesis can be done in different microwave absorbing solvents with multisource or single source precursors. The QDs are less than 3 nm in size as characterized by transmission electron microscopy (TEM) using selected area electron diffraction (SAED) patterns to confirm the wurtzite phase of ZnS QDs. The optical properties were investigated by UV-Vis absorption which shows blue shift in absorption compared to bulk wurtzite ZnS due to quantum confinement effects. The photoluminescence (PL) spectra of QDs reveal point defects related emission of ZnS QDs. - Graphical abstract: Microwave assisted synthesis of wurtzite ZnS quantum dots (QDs) have been achieved in controlled reaction at temperature as low as 150 Degree-Sign C. The synthesis was performed in different microwave absorbing solvents with multisource or single source precursors for very short reaction periods due to effective heating with microwaves. Highlights: Black-Right-Pointing-Pointer Wurtzite a high temperature phase of ZnS was synthesized at low temperature. Black-Right-Pointing-Pointer Low temperature synthesis was possible because of the use of microwave absorbing solvents. Black-Right-Pointing-Pointer Capping agent was used to control the size of Quantum Dots. Black-Right-Pointing-Pointer Two different systems were developed using single molecular precursor and multisource precursors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomic-scale mechanisms for diffusion of impurities in transition-metal nitrides

We use results from first-principles calculations based on density-functional theory to evaluate the performance of ZrN, HfN, and TiN as diffusion barrier materials. We examine primarily migration of Cu impurities through the bulk or through inter-grain voids of nitride films and we elucidate the conditions that favor moderate diffusion in the former case and very rapid migration in the latter. Migration activation energies for Cu interstitials in the bulk of the materials lie in the range of 0.9-1.4 eV, while the corresponding values for surface diffusion of Cu adatoms vary between 0.1 and 0.55 eV. Based on the agreement between the calculated activation energies and available measured values we resolve previous conflicting suggestions that were used to interpret various experimental data. Overall, our findings highlight the role of native point defects, impurities, and film texture on the performance of nitride diffusion barrier materials. (C) 2009 Elsevier B.V. All rights reserved.

36 MATERIALS SCIENCE↗

Effects of quantum well growth temperature on the recombination efficiency of InGaN/GaN multiple quantum wells that emit in the green and blue spectral regions

InGaN-based light emitting diodes and multiple quantum wells designed to emit in the green spectral region exhibit, in general, lower internal quantum efficiencies than their blue-emitting counter parts, a phenomenon referred to as the “green gap.” One of the main differences between green-emitting and blue-emitting samples is that the quantum well growth temperature is lower for structures designed to emit at longer wavelengths, in order to reduce the effects of In desorption. In this paper, we report on the impact of the quantum well growth temperature on the optical properties of InGaN/GaN multiple quantum wells designed to emit at 460 nm and 530 nm. It was found that for both sets of samples increasing the temperature at which the InGaN quantum well was grown, while maintaining the same indium composition, led to an increase in the internal quantum efficiency measured at 300 K. These increases in internal quantum efficiency are shown to be due reductions in the non-radiative recombination rate which we attribute to reductions in point defect incorporation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spectroscopic studies of the origin of radiation-induced degradation in phosphorus-doped optical fibers and preforms

In this paper, we study the radiation-induced point defects related to the phosphorus element that is commonly used to improve the optical properties of silica-based glasses but is responsible of a dramatic increase in their radiation sensitivity. To this aim, the influence of x-ray irradiation on prototype phosphorus-doped canonical fibers and their related preforms was investigated by in situ radiation induced attenuation (RIA), optical absorption, and electron spin resonance (ESR) spectroscopy. The RIA spectra in the (1.5-5 eV) range, can be explained by the presence of at least three absorption bands induced by radiation exposure. Additionally the X-dose dependence of such bands was studied. The main responsible defect for these absorption peaks was the phosphorus oxygen hole center (POHC) center, whose presence was also detected by ESR measurements both in irradiated fibers and preforms, together with the lineshape of the so called P2 defect. Correlations between the RIA bands and the ESR results allow us to assign the 2.3 and 3.0 eV bands to POHCs and to propose a scheme for the simultaneous creation of POHC and P2 defects after x-ray exposure.

36 MATERIALS SCIENCE↗

Variation of lattice constant and cluster formation in GaAsBi

We investigate the structural properties of GaAsBi layers grown by molecular beam epitaxy on GaAs at substrate temperatures between 220–315 °C. Irrespective of the growth temperature, the structures exhibited similar Bi compositions, and good overall crystal quality as deduced from X-Ray diffraction measurements. After thermal annealing at temperatures as low as 500 °C, the GaAsBi layers grown at the lowest temperatures exhibited a significant reduction of the lattice constant. The lattice variation was significantly larger for Bi-containing samples than for Bi-free low-temperature GaAs samples grown as a reference. Rutherford backscattering spectrometry gave no evidence of Bi diffusing out of the layer during annealing. However, dark-field and Z-contrast transmission electron microscopy analyses revealed the formation of GaAsBi clusters with a Bi content higher than in the surrounding matrix, as well as the presence of metallic As clusters. The apparent reduction of the lattice constant can be explained by a two-fold process: the diffusion of the excess As incorporated within As{sub Ga} antisites to As clusters, and the reduction of the Bi content in the GaAs matrix due to diffusion of Bi to GaAsBi clusters. Diffusion of both As and Bi are believed to be assisted by the native point defects, which are present in the low-temperature as-grown material.

36 MATERIALS SCIENCE↗

Low energy electron beam irradiation effect on optical properties of nanopillar MQW InGaN/GaN structures

The low energy electron beam irradiation (LEEBI) effect on optical properties of planar and nanopillar InGaN/GaN muliple quantum well light emitting structures was studied by the cathodoluminescence (CL) method. On the planar structures LEEBI leads to a formation of new InGaN-related emission bands red shifted in comparison with initial one at small irradiation doses and blue shifted at doses higher than 0.5 C/cm{sup 2}. It was observed that after dry etching used for the nanopillar formation the main InGaN-related emission line moves from 2.92 to 2.98 eV that can be explained by a strain relaxation in the quantum wells. The optical properties of nanopilars start to change under LEEBI at a dose of about one order of magnitude lower than that for planar structures. At high irradiation doses the behavior of both structures under LEEBI is similar. The results obtained were explained by the formation and reconstruction of quantum dots inside the quantum wells due to a point defect generation and redistribution stimulated by the electron beam irradiation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modulation periodicity dependent structure, stress, and hardness in NbN/W{sub 2}N nanostructured multilayer films

NbN/W{sub 2}N nano-multilayer films with a modulation periodicity, {Lambda}, ranging from 5.1 to 157.4 nm have been deposited on a Si(100) substrate by reactive magnetron sputtering in Ar/N{sub 2} mixtures. The {Lambda} dependent structural and mechanical properties for the resulting NbN/W{sub 2}N multilayers have been evaluated by means of low-angle x-ray reflectivity, x-ray diffraction, high-resolution transmission electron microscope, and nanoindentation measurements. The finding is that for films with {Lambda}{<=} 10.6 nm, fcc NbN layers are coherent with cubic W{sub 2}N layers, resulting in NbN layers and W{sub 2}N layers that are in the compressive and tensile states, respectively. In contrast, as {Lambda} is larger than 10.6 nm, a phase transition from W{sub 2}N to W occurs in the W{sub 2}N layer, which is a result of the coherent interface strain relaxation. For this case, all layers are in the compressive state, and the coherent interface disappears. The intrinsic compressive stress evolution with {Lambda} can be interpreted in terms of interface stress. The formation of coherent interface at small {Lambda} ({<=}10.6 nm) is helpful for releasing point defects in layers, leading to a low compressive stress ({<=}1.1 GPa). The hardness for the obtained multilayer film increases with decreasing {Lambda}, and approaches a maximum value of 43.7 GPa when {Lambda} is 7.4 nm. The maximum strengthen at lower {Lambda} is mainly attributed to coherent interface stresses and the modulus difference between the NbN and W{sub 2}N layers. The increase in hardness with a decrease in {Lambda} is interpreted by the Lehoczky model.

36 MATERIALS SCIENCE↗

Effect of Nickel Substitution on Defect Chemistry, Electrical Properties, and Dimensional Stability of Calcium-Doped Yttrium Chromite

The effect of nickel substitution on defect chemistry, electrical properties, and dimensional stability of calcium-doped yttrium chromite was studied for use as an interconnect material in high temperature solid oxide fuel cells (SOFCs). The compositions of Y0.8Ca0.2Cr1-xNixO3±δ (x=0-0.15), prepared using the glycine nitrate process, showed single phase orthorhombic perovskite structures over a wide range of oxygen partial pressures (10^-17 atm ≤ pO2 ≤ 0.21 atm). X-ray diffraction (XRD) analysis indicated that most of the nickel ions replacing chromium ions are divalent and act as acceptor dopants, leading to a substantial increase in conductivity. In particular, the conductivity at 900 degree C in air increased from 10 S/cm to 34 S/cm with 15% nickel substitution, and an increase in charge carrier density was confirmed by Seebeck measurements. A point defect model was derived, and the relationship between electrical conductivity and oxygen partial pressure was successfully fitted into the proposed model. The defect modeling results indicated that nickel substitution improves the stability of calcium-doped yttrium chromite toward reduction and suppresses the oxygen vacancy formation, which results in significantly increased electrical conductivity in reducing environment. The electrical conductivity of Y0.8Ca0.2Cr0.85Ni0.15O3±δ at 900 degree C in reducing atmosphere (pO2=10^-17 atm) was 5.8 S/cm, which was more than an order of magnitude higher than that of Y0.8Ca0.2CrO3±δ (0.2 S/cm). Improved stability in reducing atmosphere was further confirmed by dilatometry measurements showing reduced isothermal "chemical" expansion, and the isothermal expansion in reducing atmosphere (pO2=10^-17 atm) at 900 degree C decreased from 0.07% for Y0.8Ca0.2CrO3±δ to 0.03% for Y0.8Ca0.2Cr0.85Ni0.15O3±δ. Based on these results, enhanced electrical performance and mechanical integrity is expected with nickel substitution on calcium-doped yttrium chromite in SOFC operating conditions.

30 DIRECT ENERGY CONVERSION↗

Interaction of vacuum ultraviolet excimer laser radiation with fused silica: II. Neutral atom and molecule emission

We report mass-resolved time-of-flight measurements of neutral Si, O, and SiO from ultraviolet-grade fused silica during pulsed 157-nm irradiation at fluences well below the threshold for optical breakdown. Although the emission intensities are strongly affected by thermal treatments that affect the density of strained bonds in the lattice, they are not consistently affected by mechanical treatments that alter the density of point defects, such as polishing and abrasion. We propose that the absorption of single 157 nm photons cleave strained bonds to produce defects that subsequently diffuse to the surface. There they react with dangling bonds to release neutral atoms and molecules. Hartree-Fock calculations on clusters containing these defects support the contention that defect interactions can yield emission. More direct emission by the photoelectronic excitation of antibonding chemical states is also supported.

36 MATERIALS SCIENCE↗

Effects of Voltage-Bias Annealing on Metastable Defect Populations in CIGS and CZTSe Solar Cells

We report on voltage-bias annealing (VBA) experiments performed on CIGS and CZTSe solar cells. In these experiments, completed devices were annealed at moderate temperatures and subsequently quenched with continuously applied voltage bias. These treatments resulted in substantial reversible changes in device characteristics. Photovoltaic (PV) conversion efficiency of the CIGS device varied from below 3% to above 15%, with corresponding changes in CIGS hole density from ~1014 cm-3 to ~1017 cm-3. In the CZTSe device, open-circuit voltage varied from 289 meV to 446 meV, caused by an approximately factor of fifty change in the CZTSe hole density. We interpret these findings in terms of reversible changes to the metastable point-defect populations that control key properties in these materials. Implications for optimization of PV materials and connections to long-term stability of PV devices are discussed.

14 SOLAR ENERGY↗

Electronic and elemental properties of the Cu{sub 2}ZnSn(S,Se){sub 4} surface and grain boundaries

X-ray and femtosecond UV photoelectron spectroscopy, secondary ion mass spectrometry and photoluminescence imaging were used to investigate the electronic and elemental properties of the CZTS,Se surface and its oxides. Oxide removal reveals a very Cu poor and Zn rich surface relative to bulk composition. O and Na are observed at the surface and throughout the bulk. Upward bending of the valence bands indicates the presence of negative charge in the surface region and the Fermi level is found near the band gap center. The presence of point defects and the impact of these findings on grain boundary properties will be described.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Features of the uniaxial elastic deformation of X-ray-irradiated p-Si crystals

Changes in the conductivity of p-Si single-crystals irradiated at room temperature during their mechanical compression and stress relief are studied. It is shown that irradiation is accompanied by the generation of point defects in silicon, which play the role of stoppers for dislocation motion. The effect of “radiation memory” in “electronic” silicon crystals is detected.

36 MATERIALS SCIENCE↗

Residual stresses in silicon and their evolution upon heat treatment and irradiation

The distributions of internal stresses in undoped and tin-doped silicon and the influence of electron irradiation with an energy of 5 MeV and of heat treatment at 450°C on the stresses are studied. The stresses are measured by a method based on the detection of birefringence by modulation polarimetry. It is shown that tin-doped silicon includes stripes of point defects with a nonuniform distribution of residual stresses of up to 20 kg cm{sup –2}. Heat treatment at 450°C induces an increase in the residual stresses in the sample to 50 kg cm{sup –2}. It is established that the radiation defects formed upon the irradiation of tin-doped silicon reduce the residual stresses to 2–3 kg cm{sup –2}.

36 MATERIALS SCIENCE↗

On the nature of charge carrier scattering in Ag{sub 2}Se at low temperatures

The electric and thermoelectric properties of silver selenide in the temperature range of 4.2-300 K have been studied. The data obtained are interpreted within the theory of one-type carriers and Kane dispersion relation, with allowance for the character of electron-electron interaction. It is established that, for the concentrations n {<=} 7.8 x 10{sup 18} cm{sup -3}, charge carriers are scattered by impurity ions at T {<=} 30 K and by acoustic and optical phonons and point defects at T {>=} 30 K. Electron-electron interactions are found to be elastic at T < 30 K.

36 MATERIALS SCIENCE↗