Search NASA⌕ Search

SEARCH · Search NASA

Results for “RO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Spin texture in type-II Weyl semimetal WTe 2

We determine the band structure and spin texture of WTe 2 by spin- and angle-resolved photoemission spectroscopy (SARPES). With the support of first-principles calculations, we reveal the existence of spin polarization of both the Fermi arc surface states and bulk Fermi pockets. Our results support WTe 2 to be a type-II Weyl semimetal candidate and provide important information to understand its extremely large and nonsaturating magnetoresistance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron bubbles and the structure of the orbital wave function

Stripelike and bubblelike patterns spontaneously form in numerous physical, chemical, and biological systems when competing long-range and short-range interactions banish uniformity. Stripelike and the related nematic morphology are also under intense scrutiny in various strongly correlated electron systems. In contrast, the electronic bubble morphology is rare. Some of the most intriguing electron bubbles develop in the two-dimensional electron gas subjected to a perpendicular magnetic field. However, in contrast to bubbles forming in classical systems such as the Turing activator-inhibitor reaction or Langmuir films, bubbles in electron gases owe their existence to elementary quantum mechanics: They are stabilized as wave functions of individual electrons overlap. Furthermore, we report a rich pattern of multielectron bubble phases in a high Landau level and we conclude that this richness is due to the nodal structure of the orbital component of the electronic wave function.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Manipulation of Nonclassical Atomic Spin States

We report successful manipulation of nonclassical atomic spin states. We apply an off-resonant noncircularly-polarized light pulse to a measurement-induced squeezed spin state of a cold atomic ensemble. By changing the pulse duration, we clearly observe a rotation of the anisotropic quantum-noise distribution in good contrast with the case of manipulation of a coherent spin state where the quantum-noise distribution is always isotropic. This is an important step for quantum state tomography, quantum swapping, and precision spectroscopic measurement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Comment on “Chiral Phase Transition in Charge Ordered 1 T - TiSe 2 ”

A previous report of the emergence of chirality for the ( 2 × 2 × 2 ) charge density wave (CDW) in TiSe 2 has attracted much interest; the drastic symmetry breaking is highly unusual with few precedents. In that study, key evidence was provided by x-ray diffraction measurements of two superlattice reflections, (1.5 1.5 0.5) and (2.5 1 0). The (2.5 1 0) reflection appeared to show an anomalously large intensity and a transition onset at ~7 K below that of the (1.5 1.5 0.5) reflection. These observations, aided by modeling, were cited as evidence for a separate chiral transition. Here, we show that the prior conclusions based on x-ray diffraction are erroneous. There is just one transition, and it is achiral.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dimensionality-Mediated Semimetal-Semiconductor Transition in Ultrathin PtTe 2 Films

Platinum ditelluride (PtTe2), a type-II Dirac semimetal, remains semimetallic in ultrathin films down to just two tri-atomic layers (TLs) with a negative gap of -0.36 eV. Further reduction of the film thickness to a single TL induces a Lifshitz electronic transition to a semiconductor with a large positive gap of +0.79 eV. This transition is evidenced by experimental band structure mapping of films prepared by layer-resolved molecular beam epitaxy, and by comparing the data to first-principles calculations using a hybrid functional. The results demonstrate a novel electronic transition at the two-dimensional limit through film thickness control.

36 MATERIALS SCIENCE↗

Massive Suppression of Proximity Pairing in Topological ( Bi 1 - x Sb x ) 2 Te 3 Films on Niobium

Interfacing bulk conducting topological Bi 2 Se 3 films with s-wave superconductors initiates strong superconducting order in the nontrivial surface states. Yet, bulk insulating topological (Bi 1-x Sb x ) 2 Te 3 films on bulk Nb instead exhibit a giant attenuation of surface superconductivity, even for films only two-layers thick. This massive suppression of proximity pairing is shown by ultrahigh-resolution band mappings and by contrasting quantified superconducting gaps with those of heavily n-doped topological Bi 2 Se 3 /Nb. The results underscore the limitations of using superconducting proximity effects to realize topological superconductivity in nearly intrinsic systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Charge Instability in Single-Layer TiTe 2 Mediated by van der Waals Bonding to Substrates

Single layers of transition metal dichalcogenides are of interest for emergent properties; an often-neglected issue is substrate effects. Here, our experiments show that the charge density wave in a single-layer TiTe 2 grown on PtTe 2 films is strongly suppressed by increasing the PtTe 2 substrate thickness. Given that the interfacial bonding remains of the weak incommensurate van der Waals type, the observed changes are correlated with a thickness-dependent metallicity transformation in the PtTe 2 substrate. The results illustrate the crucial role of the substrate in single-layer physics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Model-Free Measurement of Local Entropy Production and Extractable Work in Active Matter

Time-reversal symmetry breaking and entropy production are universal features of nonequilibrium phenomena. Despite its importance in the physics of active and living systems, the entropy production of systems with many degrees of freedom has remained of little practical significance because the high dimensionality of their state space makes it difficult to measure. Here, in this work, we introduce a local measure of entropy production and a numerical protocol to estimate it. We establish a connection between the entropy production and extractability of work in a given region of the system and show how this quantity depends crucially on the degrees of freedom being tracked. We validate our approach in theory, simulation, and experiments by considering systems of active Brownian particles undergoing motility-induced phase separation, as well as active Brownian particles and E.coli in a rectifying device in which the time-reversal asymmetry of the particle dynamics couples to spatial asymmetry to reveal its effects on a macroscopic scale.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

SU-F-BRE-15: Verification of Energy Dependence of MAGAT Polymer Gel at Orthovoltage Energies

Purpose: Investigation of dose response curves of methacrylic acid-based “MAGAT” gel at different effective energies to verify an energy dependence of polymer-gel dosimeters for orthovoltage energy x-rays. Methods: Six small cylindrical MAGAT gel phantoms were exposed to different dose levels; one phantom was unirradiated for background subtraction. This experiment was repeated for three different effective beam energies.24 h post irradiation the spin-spin relaxation times (T2) were measured with a 4.7 T Bruker MR scanner at 2 cm depth inside the gel. The T2 values were converted to relaxation rates (R2) and plotted against the respective dose levels corresponding to the different effective energies. The resulting dose response curves were compared for a 250 kVp beam, the 250 kVp beam filtered by 6 cm of water, and a 125 kVp beam. Results: The passage of the 250 kVp beam through water resulted in a half-value-layer (HVL) change from 1.05 mm Cu to 1.32 mm Cu at 6 cm depth with a change in effective energy from 81.3 keV to 89.5 keV, respectively. The dose response curves showed a shift to higher relaxation rates for the harder beam. The dose response measurements for the 125 kVp beam (HVL: 3.13 mm Al, effective energy: 33.9 keV) demonstrated even higher relaxation rates than for either of the other beams. Conclusion: The MAGAT dose response curves for three different effective energies demonstrate a complex energy dependence, with an apparent decrease in sensitivity at 89.5 keV effective energy. This energy dependence is consistent with observed discrepancies of depth dose data compared with ion-chamber data. For future investigations of larger volumes, an energy-dependent sensitivity function is needed to properly assess 3-dimensional dose distributions.

60 APPLIED LIFE SCIENCES↗

SU-G-JeP2-11: Polymer Gels as 3D QA Devices in Magnetic Resonance-Guided Radiation Therapy

Purpose: To demonstrate the potential of polymer gels to serve as 3D QA devices in MR-guided radiotherapy. Methods: Custom-designed polymer gel dosimeters (MGS Research, Madison, CT) were centered on the penumbras of a radiation field, parallel to the magnetic field lines inside a 1.5 T MR scanner integrated with a 7 MV linac (MR-Linac). 15 Gy were delivered perpendicular to the magnetic field. Coronal MR images were acquired with a 2D balanced-Fast Field Echo (b-FFE) sequence in real-time during irradiation and with a 2D spin echo sequence at different times after irradiation. Signal intensities (SI) were measured inside and outside the radiation field on b-FFE images obtained during irradiation. Spin-spin relaxation rate (R2) maps were calculated from images after irradiation and penumbra widths were calculated from these maps. Results: A difference in SI between areas of the dosimeter inside and outside of the radiation field could be measured immediately after the beam was turned on. The difference in SI increased throughout the duration of the exposure. R2 values from immediately after irradiation were 83% of those measured 24h post-irradiation. At 1h after irradiation, the R2 values were 87% of those at 24h indicating that polymerization of the gel was still ongoing. At 24h postirradiation the width of the 80/20 penumbra on the left field edge measured 6.5 mm and on the right 5.6 mm. Conclusion: The MR-Linac allows for MR imaging during treatment and measurements of 3D dose distributions with steep dose gradients without having to transfer dosimeters for read-out. The results showed promise for polymer gels as relative 3D QA devices to verify radiation treatment plans delivered by an MR-Linac. To our knowledge, this was the first time that polymer gels were used for real-time image acquisition. Further investigations into the application of polymer gel dosimetry on MR-Linac are ongoing.

60 APPLIED LIFE SCIENCES↗

Markov chain decomposition of monthly rainfall into daily rainfall: Evaluation of climate change impact

This paper evaluates the effect of climate change on daily rainfall, especially on the mean number of wet days and the mean rainfall intensity. Assuming that the mechanism of daily rainfall occurrences follows the first-order Markov chain model, the possible changes in the transition probabilities are estimated by considering the climate change scenarios. Also, the change of the stationary probabilities of wet and dry day occurrences and finally the change in the number of wet days are derived for the comparison of current (1x CO 2 ) and 2x CO 2 conditions. As a result of this study, the increase or decrease in the mean number of wet days was found to be not enough to explain all of the change in monthly rainfall amounts, so rainfall intensity should also be modified. The application to the Seoul weather station in Korea shows that about 30% of the total change in monthly rainfall amount can be explained by the change in the number of wet days and the remaining 70% by the change in the rainfall intensity. That is, as an effect of climate change, the increase in the rainfall intensity could be more significant than the increase in the wet days and, thus, the risk of flood will be much highly increased.

54 ENVIRONMENTAL SCIENCES↗

Induction of multiple pleiotropic drug resistance genes in yeast engineered to produce an increased level of anti-malarial drug precursor, artemisinic acid

Background: Due to the global occurrence of multi-drug-resistant malarial parasites (Plasmodium falciparum), the anti-malarial drug most effective against malaria is artemisinin, a natural product (sesquiterpene lactone endoperoxide) extracted from sweet wormwood (Artemisia annua). However, artemisinin is in short supply and unaffordable to most malaria patients. Artemisinin can be semi-synthesized from its precursor artemisinic acid, which can be synthesized from simple sugars using microorganisms genetically engineered with genes from A. annua. In order to develop an industrially competent yeast strain, detailed analyses of microbial physiology and development of gene expression strategies are required. Results: Three plant genes coding for amorphadiene synthase, amorphadiene oxidase (AMO or CYP71AV1), and cytochrome P450 reductase, which in concert divert carbon flux from farnesyl diphosphate to artemisinic acid, were expressed from a single plasmid. The artemisinic acid production in the engineered yeast reached 250 μg mL-1 in shake-flask cultures and 1 g L-1 in bioreactors with the use of Leu2d selection marker and appropriate medium formulation. When plasmid stability was measured, the yeast strain synthesizing amorphadiene alone maintained the plasmid in 84% of the cells, whereas the yeast strain synthesizing artemisinic acid showed poor plasmid stability. Inactivation of AMO by a point-mutation restored the high plasmid stability, indicating that the low plasmid stability is not caused by production of the AMO protein but by artemisinic acid synthesis or accumulation. Semi-quantitative reverse-transcriptase (RT)-PCR and quantitative real time-PCR consistently showed that pleiotropic drug resistance (PDR) genes, belonging to the family of ATP-Binding Cassette (ABC) transporter, were massively induced in the yeast strain producing artemisinic acid, relative to the yeast strain producing the hydrocarbon amorphadiene alone. Global transcriptional analysis by yeast microarray further demonstrated that the induction of drug-resistant genes such as ABC transporters and major facilitator superfamily (MSF) genes is the primary cellular stress-response; in addition, oxidative and osmotic stress responses were observed in the engineered yeast. Conclusion: The data presented here suggest that the engineered yeast producing artemisinic acid suffers oxidative and drugassociated stresses. The use of plant-derived transporters and optimizing AMO activity may improve the yield of artemisinic acid production in the engineered yeast.

59 BASIC BIOLOGICAL SCIENCES↗

The STAT7 Code for Statistical Propagation of Uncertainties in Steady State Thermal Hydraulics Analysis of Plate Fueled Reactors

The STAT7 software was developed to perform steady-state thermal hydraulic analyses. Application of the software is for non-power research and test reactors, including conversion to low-enriched uranium fuel of U.S. High-Performance Research Reactors such as MITR-II. Since it can be necessary to repeat analysis during fuel reloading, STAT7 accommodates flexibility in analyzing many realistic aspects of reactor fuel management. STAT7 uses a Monte Carlo approach to model common fabrication parameters and other key reactor analysis uncertainties required for research and test reactor thermal hydraulic analyses. These safety calculations are ultimately intended to protect against high fuel plate temperatures due to critical heat flux or departure from nucleate boiling or onset of flow instability; but additional margin is obtained by basing the limiting safety settings on avoiding onset of nucleate boiling. STAT7 can simultaneously analyze all of the axial nodes of all of the fuel plates and all of the coolant channels for one lateral stripe of a fuel element. The stripes run the length of the fuel, from the bottom to the top. Power splits are calculated for each axial node of each plate to determine how much of the power goes out each face of the plate. By running STAT7 multiple times, full core analysis can be performed by analyzing the margin to onset of nucleate boiling and onset of flow instability for each axial node of each stripe of each plate of each element in the core.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Verification and Validation of the STAT7 Code

This document presents the verification and validation of the STAT7 Version 1.1 code, which has been developed to perform the steady-state thermal hydraulics (TH) safety calculations required to support conversion of the Massachusetts Institute of Technology Research Reactor from highly enriched uranium fuel to low- enriched uranium fuel. The key capabilities of the code, including statistical processing, water property generation, and TH solution, are verified independently. While the first two capabilities are checked using statistical tests and NIST data tables, each component of the TH solution is verified using simple geometry test problems. The comparison between results obtained by the code and by hand calculations on these problems shows that each of these components works correctly. Additionally, a comprehensive comparison between STAT7 Version 1.1 and PLTEMP/ANL Version 4.3 Revision 162 calculations is performed for the validation. Good agreement is achieved between the results obtained with the two codes for all TH parameters belonging to the fuel core region.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

BT23 Updates for Med $70

BT23 update using the 2025 baseline and starting results in 2024 for Med $70 with updated budgets. Cost updates include: 1) Increased the nitrogen application for the following crops: willow, camelina, carinata, pennycress, and willow. 2) Removed roundup during establishment for the following crops: camelina. 3) Harvest costs were updated because the combine width was adjusted. This affected the following crops: barley, camelina, carinata, corn, oat, pennycress, rice, sorghum, soybean, and wheat. 4) Harvest cost was updated with biomass sorghum because an additional tractor was added to pull the high dump forage wagon, and the wagon width was adjusted to not constrain the harvest operation with the combine. 5) Added poplar in the ag budget database for regions 1 and 13.

agricultural crop↗

National summary for agricultural crops and residues, 2041

This dataset contains national summary data on agricultural crop and residue production, which include agricultural crop, agricultural residue, herbaceous energy crop, and woody energy crop. Each tab in the Excel file contains information corresponding to a resource category, and within each tab, there is a structured table presenting resource production (in dry short ton) by offered price (in USD per dry short ton) across multiple scenarios (mature-market low, mature-market medium, and mature-market high). Consistent with the 2023 Billion-Ton report for agricultural resources, these scenarios represent potential production scenarios for 2041. List of the resources shown in this dataset: - Agricultural crop: Barley, Corn, Cotton, Grain sorghum, Hay, Oats, Rice, Soybeans, Wheat - Agricultural residue: Barley straw, Corn stover, Oats straw, Sorghum stubble, Wheat straw - Herbaceous energy crop: Biomass sorghum, Energy cane, Miscanthus, Switchgrass - Woody energy crop: Eucalyptus, Pine, Poplar, Willow

agricultural crop↗