Search NASA⌕ Search

SEARCH · Search NASA

Results for “Relative Motion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Model-Based Wavefront Control for CCAT

The 25-m aperture CCAT submillimeter-wave telescope will have a primary mirror that is divided into 162 individual segments, each of which is provided with 3 positioning actuators. CCAT will be equipped with innovative Imaging Displacement Sensors (IDS) inexpensive optical edge sensors capable of accurately measuring all segment relative motions. These measurements are used in a Kalman-filter-based Optical State Estimator to estimate wavefront errors, permitting use of a minimum-wavefront controller without direct wavefront measurement. This controller corrects the optical impact of errors in 6 degrees of freedom per segment, including lateral translations of the segments, using only the 3 actuated degrees of freedom per segment. The global motions of the Primary and Secondary Mirrors are not measured by the edge sensors. These are controlled using a gravity-sag look-up table. Predicted performance is illustrated by simulated response to errors such as gravity sag.

edge sensor↗

Lunar Science from Lunar Laser Ranging

Variations in rotation and orientation of the Moon are sensitive to solid-body tidal dissipation, dissipation due to relative motion at the fluid-core/solid-mantle boundary, tidal Love number k2, and moment of inertia differences. There is weaker sensitivity to flattening of the core/mantle boundary (CMB) and fluid core moment of inertia. Accurate Lunar Laser Ranging (LLR) measurements of the distance from observatories on the Earth to four retroreflector arrays on the Moon are sensitive to variations in lunar rotation, orientation and tidal displacements. Past solutions using the LLR data have given results for Love numbers plus dissipation due to solid-body tides and fluid core. Detection of the fluid core polar minus equatorial moment of inertia difference due to CMB flattening is weakly significant. This strengthens the case for a fluid lunar core. Future approaches are considered to detect a solid inner core.

Love numbers↗

Mechanical Accommodation of Mars Science Laboratory Surface Thermal Requirements

This paper describes the novel method used for supporting the thermally controlled panel on the uncontrolled structure. The method described allows for large magnitude thermally induced relative motion between the panels while it simultaneously provides a controlled thermal resistivity between the two panels. The resulting design is also capable of withstanding the accelerations of atmospheric entry and provides sufficient stiffness to ensure its motion is significantly de-coupled from that of the launch vehicle.

Rosette, Keith A.↗

Electrostatic Model Applied to ISS Charged Water Droplet Experiment

The electrostatic force can be used to create novel relative motion between charged bodies if it can be isolated from the stronger gravitational and dissipative forces. Recently, Coulomb orbital motion was demonstrated on the International Space Station by releasing charged water droplets in the vicinity of a charged knitting needle. In this investigation, the Multi-Sphere Method, an electrostatic model developed to study active spacecraft position control by Coulomb charging, is used to simulate the complex orbital motion of the droplets. When atmospheric drag is introduced, the simulated motion closely mimics that seen in the video footage of the experiment. The electrostatic force's inverse dependency on separation distance near the center of the needle lends itself to analytic predictions of the radial motion.

Stevenson, Daan↗

Flexure Based Linear and Rotary Bearings

A flexure based linear bearing includes top and bottom parallel rigid plates; first and second flexures connecting the top and bottom plates and constraining exactly four degrees of freedom of relative motion of the plates, the four degrees of freedom being X and Y axis translation and rotation about the X and Y axes; and a strut connecting the top and bottom plates and further constraining exactly one degree of freedom of the plates, the one degree of freedom being one of Z axis translation and rotation about the Z axis.

Voellmer, George M.↗

Ogle-2012-blg-0724lb: A Saturn Mass Planet Around an M-dwarf

We report the discovery of a planet by the microlensing method, OGLE-2012-BLG-0724Lb. Although the duration of the planetary signal for this event was one of the shortest seen for a planetary event, the anomaly was well covered thanks to high-cadence observations taken by the survey groups OGLE and MOA. By analyzing the light curve, this planetary system is found to have a mass ratio q = (1.58 +/- 0.15) x 10(exp -3). By conducting a Bayesian analysis, we estimate that the host star is an M dwarf with a mass of M(sub L) = 0.29(+0.33/-0.16) solar mass located at D(sub L) = 6.7(+1.1/-1.2) kpc away from the Earth and the companion's mass is m(sub P) = 0.47(+0.54/-0.26) M(Jup). The projected planet- host separation is a falsum = 1.6(+0.4/-0.3) AU. Because the lens-source relative proper motion is relatively high, future highresolution images would detect the lens host star and determine the lens properties uniquely. This system is likely a Saturn-mass exoplanet around an M dwarf, and such systems are commonly detected by gravitational microlensing. This adds another example of a possible pileup of sub-Jupiters (0.2 less than m(sub P)/M(sub Jup) less than 1) in contrast to a lack of Jupiters (approximately 1-2 M(sub Jup)) around M dwarfs, supporting the prediction by core accretion models that Jupiter-mass or more massive planets are unlikely to form around M dwarfs.

microlensing↗

Dynamic/Jitter Assessment of Multiple Potential HabEx Structural Designs

One of the driving structural requirements of the Habitable Exo-Planet (HabEx) telescope is to maintain Line Of Sight (LOS) stability between the Primary Mirror (PM) and Secondary Mirror (SM) of ≤ 5 mas. Dynamic analyses of two configurations of a proposed (HabEx) 4 meter off-axis telescope structure were performed to predict effects of jitter on primary/secondary mirror alignment. The dynamic disturbance used as the forcing function was the James Webb Space Telescope reaction wheel assembly vibration emission specification level. The objective of these analyses was to predict "order-of-magnitude" performance for various structural configurations which will roll into efforts to define the HabEx structural design's global architecture. Two variations of the basic architectural design were analyzed. Relative motion between the PM and the SM for each design configuration are reported.

Knight, J. Brent↗

Operating Small Sat Swarms as a Single Entity: Introducing SODA

NASA's decadal survey determined that simultaneous measurements from a 3D volume of space are advantageous for a variety of studies in space physics and Earth science. Therefore, swarm concepts with multiple spacecraft in close proximity are a growing topic of interest in the small satellite community. Among the capabilities needed for swarm missions is a means to maintain operator-specified geometry, alignment, or separation. Swarm stationkeeping poses a planning challenge due to the limited scalability of ground resources. To address scalable control of orbital dynamics, we introduce SODA - Swarm Orbital Dynamics Advisor - a tool that accepts high-level configuration commands and provides the orbital maneuvers needed to achieve the desired type of swarm relative motion. Rather than conventional path planning, SODA's innovation is the use of artificial potential functions to define boundaries and keepout regions. The software architecture includes high fidelity propagation, accommodates manual or automated inputs, displays motion animations, and returns maneuver commands and analytical results. Currently, two swarm types are enabled: in-train distribution and an ellipsoid volume container. Additional swarm types, simulation applications, and orbital destinations are in planning stages.

Conn, Tracie↗

Operating Small Sat Swarms as a Single Entity: Introducing SODA

NASA's decadal survey determined that simultaneous measurements from a 3D volume of space are advantageous for a variety of studies in space physics and Earth science. Therefore, swarm concepts with multiple spacecraft in close proximity are a growing topic of interest in the small satellite community. Among the capabilities needed for swarm missions is a means to maintain operator-specified geometry, alignment, or separation. Swarm stationkeeping poses a planning challenge due to the limited scalability of ground resources. To address scalable control of orbital dynamics, we introduce SODA - Swarm Orbital Dynamics Advisor - a tool that accepts high-level configuration commands and provides the orbital maneuvers needed to achieve the desired type of swarm relative motion. Rather than conventional path planning, SODA's innovation is the use of artificial potential functions to define boundaries and keepout regions. The software architecture includes high fidelity propagation, accommodates manual or automated inputs, displays motion animations, and returns maneuver commands and analytical results. Currently, two swarm types are enabled: in-train distribution and an ellipsoid volume container. Additional swarm types, simulation applications, and orbital destinations are in planning stages.

Conn, Tracie↗

Preload Loss in a Spacecraft Fastener via Vibration-Induced Unwinding

Sound engineering practice requires that fasteners and bolted joints maintain preload in service. NASA recently concluded a series of vibration tests of a multicomponent structure intended to simulate an upper stage section of a launch vehicle. The stacked components were joined through six circumferentially placed bolted cup-cone-style pyrotechnic joint mechanisms designed to share spacecraft structural loads and then enable separation during ascent. Over the course of the vibration test campaign, all six bolted cup-cone mechanisms experienced some degree of preload loss with two mechanisms losing half of their original bolt preload. A subsequent forensic anomaly investigation concluded that vibration-induced unwinding of the preload nut-and-bolt assemblies occurred despite the use of safety wire and high levels of thread friction. A series of experiments were done to better understand how large, heavily preloaded fasteners could unwind. Additionally, thread friction torque was measured and the fastener locking capability of safety wire was evaluated. The friction coefficient between the clamped cup-cone components was characterized and finally a highly instrumented mechanism-level vibration test was done to reproduce the unwinding phenomenon to better understand the mechanism's behavior. The conclusion drawn was that vibration and structural forces led to relative motion (sliding) of the clamped components, resulting in self-loosening and unwinding effects on the nut-and-bolt assembly. To counter this phenomenon, more effective fastener locking methodologies were recommended and a follow-on effort was initiated to quantify the relationship between preload, component motion, and resulting unwinding forces. It is hoped that elucidation of these effects can be used to design more effective fastener locking features.

fasteners↗

LMI-Based Multiobjective Optimization and Control of Flexible Aircraft Using VCCTEF

This paper considers the control of coupled aeroelastic aircraft model with Variable Camber Continuous Trailing Edge Flap (VCCTEF) system. The relative motion between two adjacent flaps is constrained and this actuation constraint problem is converted into an output covariance constraint problem, and therefore can be formulated using linear matrix inequalities (LMIs). A set of LMI conditions is derived for the design of an observer-based dynamic output feedback controller for VCCTEF configured aeroelastic aircraft model. The proposed controller is then applied to the NASA Generic Transport Model (GTM) for simulation, and the results demonstrate the efficacy of the proposed approach.

LMI control↗

Study of an Automatic System for Control of the Terminal Phase of Satellite Rendezvous

An analytical and simulation study was conducted of an automatic system to control the terminal phase of rendezvous between two space vehicles. The system employs switching and thrust orientation criteria based upon relative-motion parameters first to establish a collision course and then to reduce the range and range rate to zero simultaneously. Techniques are developed for employing either modulated thrust or on-off thrust at a constant level. Results of the study indicate that the automatic system can effectively control rendezvous over a wide range of initial conditions and can utilize the available fuel in a very efficient manner.

Lineberry, Edgar C., Jr.↗

Orion Capsule Parachute Assembly System (CPAS) Riser Twist Load Amplification

Any cluster of parachute systems is subject to effects on performance due to interactions between the parachutes. One such interaction is the twisting of a riser from one parachute around that of another. Due to friction and relative motion between the risers, it is possible for the tension in the riser near the attach point to be different from the tension in the riser towards the suspension lines or canopy. This could result in system failure due to larger than expected loading. The Orion Capsule Parachute Assembly System (CPAS) designed and executed a test to quantify the amplification of the load in a parachute riser due to twist, rocking rate and angle, cluster size, and canopy load. The design of the testing approach, test matrix, and hardware are discussed along with results and findings.

Parachute↗

HelioSwarm: Swarm Mission Design in High Altitude Orbit for Heliophysics

Resolving the complex three-dimensional turbulent structures that characterize the solar wind requires contemporaneous spatially and temporally distributed measurements. HelioSwarm is a mission concept that will deploy multiple, co-orbiting satellites to use the solar wind as a natural laboratory for understanding the fundamental, universal process of plasma turbulence. The HelioSwarm transfer trajectory and science orbit use a lunar gravity assist to deliver the ESPA-class nodes attached to a large data transfer hub to a P/2 lunar resonant orbit. Once deployed in the science orbit, the free-flying, propulsive nodes use simple Cartesian relative motion patterns to establish baseline separations both along and across the solar wind flow direction.

lunar resonant orbit↗

HelioSwarm: Swarm Mission Design in High Altitude Orbit for Heliophysics

Resolving the complex three-dimensional turbulent structures that characterize the solar wind requires contemporaneous spatially and temporally distributed measurements. HelioSwarm is a mission concept that will deploy multiple, co-orbiting satellites to use the solar wind as a natural laboratory for understanding the fundamental, universal process of plasma turbulence. The HelioSwarm transfer trajectory and science orbit use a lunar gravity assist to deliver the ESPA-class nodes attached to a large data transfer hub to a P/2 lunar resonant orbit. Once deployed in the science orbit, the free-flying, propulsive nodes use simple Cartesian relative motion patterns to establish baseline separations both along and across the solar wind flow direction.

lunar resonant orbit↗

Autonomous Nanosatellite Swarming (ANS) Using Radio Frequency and Optical Navigation

The Autonomous Nanosatellite Swarming (ANS) subsystem is a dynamics, guidance, navigation, and control software unit based on commercial-off-the-shelf avionics, which is distributed and deployed on a cluster of cooperative nanosatellites to enable future exploration missions to near-Earth objects (NEOs). ANS allows multiple nanosatellites to act together as a single large spacecraft through radio-frequency (RF) cross-links, optical navigation, and low-thrust control. In particular, ANS-equipped nanosatellites can utilize images of a NEO taken from multiple viewpoints to achieve stereo-vision capabilities and characterize the target body’s shape, gravity field, and dynamical properties. All this is enabled by the fusion of major advances to the state of the art in the astrodynamics of relative motion, RF and vision-based navigation, as well as low-thrust control.

Simone D'Amico↗

Bayesian Approach for Determining Microlens System Properties with High-angular resolution Follow-up Imaging

We present the details of the Bayesian analysis of the planetary microlensing event MOA-2016-BLG-227, whose excess flux is likely due to a source/lens companion or an unrelated ambient star, as well as of the assumed prior distributions. Furthermore, we apply this method to four reported planetary events, MOA-2008-BLG-310, MOA2011-BLG-293, OGLE-2012-BLG-0527, and OGLE-2012-BLG-0950, where adaptive optics observations have detected excess flux at the source star positions. For events with small angular Einstein radii, our lens mass estimates are more uncertain than those of previous analyses, which assumed that the excess was due to the lens. Our predictions for MOA-2008-BLG-310 and OGLE-2012-BLG-0950 are consistent with recent results on these events obtained via Keck and Hubble Space Telescope observations when the source star is resolvable from the lens star. For events with small angular Einstein radii, we find that it is generally difficult to conclude whether the excess flux comes from the host star. Therefore, it is necessary to identify the lens star by measuring its proper motion relative to the source star to determine whether the excess flux comes from the lens star. Even without such measurements, our method can be used to statistically test the dependence of the planet-hosting probability on the stellar mass.

Naoki Koshimoto↗

Spatial Acquisition in the Presence of Satellite Vibrations for Free Space Optical Communication Link

Laser communication systems offer distinct advantages over radio frequency based systems for near earth and particularly for deep space communicaiton links. Some of the advantages are smaller size, lower power requirements and higher data rates. However, laser beam widths are very narrow and require more precise pointing, acquisition and tracking (PAT) compared to RF communication sytems. In addition to imprecise knowledge of relative position and complex relative motion between the spacecrafts, the problem of pointing and acquisition is complicated by vibrations present in the spacecraft. This paper analyzes the impact of satellite vibration on acquisition time and acquisition probability for a charge coupled device (CCD) based acquisition scheme.

laser↗