Search NASA⌕ Search

SEARCH · Search NASA

Results for “SLIDING CONTACT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Effect of Substrate Surface Finish on the Lubrication and Failure Mechanisms of Molybdenum Disulfide Films

An optical microscope was used to study the lubrication and failure mechanisms of rubbed (burnished) MoS2 films applied to three substrate surface finishes - polished, sanded, and sandblasted - as a function of sliding distance. The lubrication mechanism was the plastic flow of thin films of MoS2 between flat plateaus on the rider and on the metallic substrate. If the substrates were rough, flat plateaus were created during 'run in' and the MoS2 flowed across them. Wear life was extended by increasing surface roughness since valleys in the roughened substrate served as reservoirs for MoS2 and a deposit site for wear debris. In moist air, the failure mechanism was the transformation of metallic colored MoS2 films to a black, powdery material that was found by X ray diffraction to consist primarily of alpha iron and MoO3 powders. In dry argon, the failure mechanism was the gradual depletion of the MoS2 film from the contact region by transverse flow. Analysis of the wear debris on the wear track at failure showed it consisted mainly of alpha iron and some residual MoS2. No molybdenum oxides were found.

Fusaro, R. L.↗

Laser Ablative Patterning of B4C and MoAlB Ceramics for Hydrophobic Surfaces

Through a novel laser ablative patterning (LAP) process, the present work reports the increase in wetting contact angle of molybdenum aluminum boride (MoAlB) and the reduction of dust adhesion. The LAP technique employed picosecond laser pulses to form a crosshatch pattern with micropillars on ceramic surfaces. The wetting behavior was successfully transitioned from hydrophilic (θ < 90°) to hydrophobic (θ > 90°), which may be related to Wenzel or Cassie-Baxter mechanisms. Parameters such as laser fluence and number of laser scans were varied to study their effects on ceramic surface characteristics. Dust adhesion experiments were performed on these hydrophobic ceramic surfaces, which showed that the adhesion of lunar soil simulant dust particles was significantly reduced in the patterned MoAlB surface. The patterned MoAlB samples were further examined using the surveying lunar dust influence on device efficacy (SLIDE) testbed to evaluate the wear performance.

Bai Cui↗

Dry Sliding Wear Behavior and Mechanism of a Hot-Dip Aluminized Steel as a Function of Sliding Velocity

Fe-Al intermetallic coatings were prepared on AISI 1045 steel by hot-dip aluminizing and subsequent high-temperature diffusion. The dry sliding wear tests were performed for the aluminized steel with various substrate hardnesses in the velocity range of 0.75-4 m/s on a pin-on-disk configuration. The dry sliding wear behavior and mechanisms of the aluminized steel under various velocities were explored. It was found that the wear rate decreased substantially with an increase in sliding velocity from 0.75 to 1.5 and then slightly varied in the velocity range of 1.5-4 m/s. The wear behavior and mechanisms of the aluminized steel were noticed to be closely related with tribo-layers. As tribo-layers contained more oxides with Fe{sub 2}O{sub 3}, the wear resistance of the aluminized steel was markedly improved because of their protective function. The substrate hardness also changed the wear behavior of the aluminized steel by affecting the stability of tribo-layers because the substrate hardness was inversely proportional to the thermal stability of the substrate structure. Under a low velocity of 0.75 m/s, adhesive wear and abrasive wear prevailed owing to the metal-on-metal contact, resulting in a higher wear rate. At 1.5-4 m/s, mild oxidative wear prevailed due to the stable existence of tribo-oxides layers. However, at 1.5 and 4 m/s for the substrate hardness of 45 HRC, the wear rate was slightly increased because the protection of tribo-layers was weakened by a double-layered structure or more cracks in tribo-layers and coatings.

36 MATERIALS SCIENCE↗

Effect of substrate surface finish on the lubrication and failure mechanisms of molybdenum disulfide films

An optical microscope was used to study the lubrication and failure mechanisms of rubbed (burnished) MoS2 films applied to three substrate surface finishes - polished, sanded, and sandblasted - as a function of sliding distance. The lubrication mechanism was the plastic flow of thin films of MoS2 between flat plateaus on the rider and on the metallic substrate. If the substrate was rough, flat plateaus were created during 'run-in' and the MoS2 flowed across them. Wear life was extended by increasing surface roughness since valleys in the roughened substrate served as reservoirs for MoS2 and a deposit site for wear debris. In moist air, the failure mechanism was the transformation of metallic-colored MoS2 films to a black, powdery material that was found by X-ray diffraction to consist primarily of alpha-iron and MoO3 powders. In dry argon, the failure mechanism was the gradual depletion of the MoS2 film from the contact region by transverse flow. Analysis of the wear debris on the wear track at failure showed it consisted mainly of alpha-iron and some residual MoS2. No molybdenum oxides were found.

Fusaro, R. L.↗

What have we learned about galaxies through large computations?

Numerical models permit modelling processes within galaxies that are seemingly beyond the reach of physical contact or close-up viewing from different angles. N-body equations permit simple computations of the interactions of individual stars within galaxies, but the motions of these objects feature nonlinear characteristics because of the forces exerted by the complex as a whole which are not amenable to examination with Newtonian laws of force. The models have, however, revealed that thin disk galactic are not stable forms, that barlike structures rotating end-over-end are more stable structures, and that galactic contraction occurs during collisions between galaxies. Internal effects have been successfully predicted for galaxies which are part of clusters, growth rate disturbances due to the expansion of the Universe have been quantified as 2-3 percent and dynamical friction has been shown to damage galaxies which are sliding into background material.

Miller, R. H.↗

Analysis of migration rate and chemotaxis of human adipose-derived mesenchymal stem cells in response to LPS and LTA in vitro

Mesenchymal stem cells (MSC) are able to stimulate the regeneration of injured tissue. Since bacterial infections are common complications in wound healing, bacterial pathogens and their components come into direct contact with MSC. The interaction with bacterial structures influences the proliferation, differentiation and migratory activity of the MSC, which might be of relevance during regeneration. Studies on MSC migration in response to bacterial components have shown different results depending on the cell type. Here, we analyzed the migration rate and chemotaxis of human adipose-derived MSC (adMSC) in response to the basic cell-wall components lipopolysaccharide (LPS) of Gram-negative bacteria and lipoteichoic acid (LTA) of Gram-positive bacteria in vitro. To this end, we used transwell and scratch assays, as well as a specific chemotaxis assay combined with live-cell imaging. We found no significant influence of LPS or LTA on the migration rate of adMSC in transwell or scratch assays. Furthermore, in the µ-slide chemotaxis assay, the stimulation with LPS did not exert any chemotactic effect on adMSC. - Highlights: • LPS increased the release of IL-6 and IL-8 in adMSC significantly. • The migration rate of adMSC was not influenced by LPS or LTA. • LPS or LTA did not exert a chemotactic effect on adMSC.

60 APPLIED LIFE SCIENCES↗

Analysis of Plasmadynamic Nanosecond-Range Processes in the Formation of Shock Waves from Pulsed Discharges

We have studied the dynamics of the plasma glow of pulsed discharges (sliding surface discharge and combined volume discharge with plasma electrodes) in the nanosecond range (100–12 000 ns) in stationary air and in the flow behind the front of a plane shock wave with Mach numbers 1.7–5.0 in the shock tube channel. The temporal characteristics of the flow, the radiation spectra, and the discharge currents in air are compared in the pressure range 5–150 Torr, a pulsed voltage of 20–30 kV, and a current of about 1 kA. It is shown that the time of current under various conditions does not exceed 400 ns, and the duration of the glow can reach a few microseconds. It is shown that as a result of energy supply near the planar shock wave front, the decay of discontinuities occurs with the formation of shock waves and contact surfaces. The positions of the plasma glow regions are compared with the positions of discontinuity surfaces of numerically calculated gasdynamic parameters in the flow.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of laser surface texturing (LST) on tribochemical films dynamics and friction and wear performance

Surface texturing or topographical design is one of the primary techniques to control friction and wear performance of surfaces in tribological contact. Laser surface texturing (LST), whereby a laser beam is used to produce regular arrays of dimples on a surface, has been demonstrated to reduce friction in conformal lubricated contacts. Friction and wear behavior under boundary lubrication is also known to be dependent on the formation and durability of the tribochemical film formed from lubricant additives. In this paper, the effects of LST on the formation and durability of tribochemical films and its consequent impacts on friction and wear behavior in various lubrication regimes were evaluated. Friction and wear tests that cycled through different lubrication regimes were conducted with both polished and LST treated surfaces using a synthetic lubricant with and without model additives of ZDDP and MoDTC mixture. In the base oil without additives, LST produced noticeable reduction in friction in all lubrication regimes. However, with low-friction model additives, friction was higher in tests with LST due to significant differences in the tribochemical film formation in the polished and LST surfaces, as well as the sliding counterface. Continuous tribo-films were formed on ball conterface rubbed against polished surfaces while the films were streaky and discontinuous in ball rubbed against LST surfaces. LST produced more wear on the ball counterface in both base and additized oils. Lastly, no measurable wear was observed in both the polished and LST flat specimens.

36 MATERIALS SCIENCE↗

The nanocaterpillar's random walk: diffusion with ligand–receptor contacts

Particles with ligand–receptor contacts bind and unbind fluctuating “legs” to surfaces, whose fluctuations cause the particle to diffuse. Quantifying the diffusion of such “nanoscale caterpillars” is a challenge, since binding events often occur on very short time and length scales. Here, in this work, we derive an analytical formula, validated by simulations, for the long time translational diffusion coefficient of an overdamped nanocaterpillar, under a range of modeling assumptions. We demonstrate that the effective diffusion coefficient, which depends on the microscopic parameters governing the legs, can be orders of magnitude smaller than the background diffusion coefficient. Furthermore it varies rapidly with temperature, and reproduces the striking variations seen in existing data and our own measurements of the diffusion of DNA-coated colloids. Our model gives insight into the mechanism of motion, and allows us to ask: when does a nanocaterpillar prefer to move by sliding, where one leg is always linked to the surface, and when does it prefer to move by hopping, which requires all legs to unbind simultaneously? We compare a range of systems (viruses, molecular motors, white blood cells, protein cargos in the nuclear pore complex, bacteria such as Escherichia coli, and DNA-coated colloids) and present guidelines to control the mode of motion for materials design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Email-Based Informed Consent: Innovative Method for Reaching Large Numbers of Subjects for Data Mining Research

Since the 2010 NASA authorization to make the Life Sciences Data Archive (LSDA) and Lifetime Surveillance of Astronaut Health (LSAH) data archives more accessible by the research and operational communities, demand for data has greatly increased. Correspondingly, both the number and scope of requests have increased, from 142 requests fulfilled in 2011 to 224 in 2014, and with some datasets comprising up to 1 million data points. To meet the demand, the LSAH and LSDA Repositories project was launched, which allows active and retired astronauts to authorize full, partial, or no access to their data for research without individual, study-specific informed consent. A one-on-one personal informed consent briefing is required to fully communicate the implications of the several tiers of consent. Due to the need for personal contact to conduct Repositories consent meetings, the rate of consenting has not kept up with demand for individualized, possibly attributable data. As a result, other methods had to be implemented to allow the release of large datasets, such as release of only de-identified data. However the compilation of large, de-identified data sets places a significant resource burden on LSAH and LSDA and may result in diminished scientific usefulness of the dataset. As a result, LSAH and LSDA worked with the JSC Institutional Review Board Chair, Astronaut Office physicians, and NASA Office of General Counsel personnel to develop a "Remote Consenting" process for retrospective data mining studies. This is particularly useful since the majority of the astronaut cohort is retired from the agency and living outside the Houston area. Originally planned as a method to send informed consent briefing slides and consent forms only by mail, Remote Consenting has evolved into a means to accept crewmember decisions on individual studies via their method of choice: email or paper copy by mail. To date, 100 emails have been sent to request participation in eight HRP-funded studies. The development of the Remote Consent process, the laws allowing transmission of consent via electronic means, total metrics to date, and remaining challenges (e.g., response issues, use of International Partner data, biospecimens/genetic data) for the research use of LSAH/LSDA data will be described.

Lee, Lesley R.↗

Silver film on nanocrystalline TiO{sub 2} support: Photocatalytic and antimicrobial ability

Highlights: • Simple photocatalytic rout for deposition of Ag on nanocrystalline TiO{sub 2} films. • High antibactericidal efficiency of deposited Ag on TiO{sub 2} support. • Improved photocatalytic performance of TiO{sub 2} films in the presence of deposited Ag. - Abstract: Nanocrystalline TiO{sub 2} films were prepared on glass slides by the dip coating technique using colloidal solutions consisting of 4.5 nm particles as a precursor. Photoirradiation of nanocrystalline TiO{sub 2} film modified with alanine that covalently binds to the surface of TiO{sub 2} and at the same time chelate silver ions induced formation of metallic silver film. Optical and morphological properties of thin silver films on nanocrystalline TiO{sub 2} support were studied by absorption spectroscopy and atomic force microscopy. Improvement of photocatalytic performance of nanocrystalline TiO{sub 2} films after deposition of silver was observed in degradation reaction of crystal violet. Antimicrobial ability of deposited silver films on nanocrystalline TiO{sub 2} support was tested in dark as a function of time against Escherichia coli, Staphylococcus aureus, and Candida albicans. The silver films ensured maximum cells reduction of both bacteria, while the fungi reduction reached satisfactory 98.45% after 24 h of contact.

36 MATERIALS SCIENCE↗

Competition between roughness and strength for scale-dependent surfaces

Rocks famously have scale-dependent strength, yet the actual dependence is notoriously hard to measure or incorporate into any theoretical framework. Natural rough surfaces present an opportunity to solve the problem. Surfaces sliding in shear evolve as protrusions collide. These asperities can deform or break, thus creating a new surface shape. In particular, natural surfaces have roughness at all scales as well as scale-dependent strength. Based on a scaling analysis, we have previously suggested that the scale-dependent aspect ratio of steady-state surfaces should be proportional to the scale-dependent shear strain at yield. If true, scale-dependent strength could easily be inferred from natural surfaces. Thus, moving beyond the scaling argument to a rigorous treatment of scale-dependent strength for multiscale rough surfaces in shear is important. However, analytic frameworks for analyzing multiscale problems are challenging, as conventional continuum mechanics typically involves a single value for a material property across scales. Here, in this work, we build on the formalism of Persson (2001) that presents a method to compute contact area for rough surfaces with a prescribed topographic spectrum using a stochastic differential equation. The Persson formalism allows for plastic yield under normal loading of otherwise elastic materials and leaves open the possibility of scale-dependent yield stress. In this study, we pursue this route to develop a theory and numerical results for the yielding of a rough, elastoplastic surface with scale-dependent yield stress. Here, we examine surfaces for which the power spectrum of the topography 𝐶 and yield stress 𝑌 follow power laws as a function of scale 𝜆, such that 𝐶∼𝜆 −𝑚 and 𝑌∼𝜆 −𝑛 , respectively. In this formal treatment of the problem, we focus on surfaces in contact and the resulting yield and do not impose shear. Numerical solutions show that the deviation from the elastic scaling solution is bounded as expected by the prior 1D heuristic scaling argument that anticipates the Hurst exponent as 1−𝑛. We also show that the plasticity is expected to erode the contacts if 𝑚 is lower than 𝑛−3, which corresponds to a Hurst exponent lower than 1−𝑛/2. This result is rigorously sound for 2D, i.e., realistic surfaces, and quantitatively different than the prior scaling argument. The theory now permits a correspondingly quantitative approach to interpreting natural surfaces.

elasticity↗

Strength and deformation properties of basaltic lava flows on planetary surfaces

Basaltic rocks are thought to constitute a volumetrically significant rock type on the Moon, Mercury, Mars, and Venus, in addition to the Earth. Spacecraft images of surfaces with known or suspected basaltic composition on these bodies, particularly on Venus, indicate that these rocks have been deformed in the brittle regime to form faults and perhaps dilatant cracks, in addition to folding and more distributed types of deformation. Predictions of brittle fracture or other types of deformation are made by comparing calculated stresses from a tectonic model to some criterion for rock strength. Common strength criteria used in the planetary science literature for near-surface deformation include a Griffith tensile-strength criterion for intact rock, a Mohr envelope for intact basalt, and a brittle strength envelope based on Byerlee's law of rock frictional resistance. However, planetary terrains of basaltic composition consist of much more than just intact basaltic rock. The aggregate basaltic material, termed the 'rock mass,' consists of both the intact rock and the associated fracture, faults, lithologic contacts, and other discontinuous surfaces. A basaltic rock mass is the relevant material for which strength properties must be defined and calculated model stresses must be compared to in order to more accurately predict brittle deformation. For example, the various strengths of a rock mass are less than that of intact material of the same composition. This means that tectonic models which compare stresses to intact failure strengths overestimate the stresses required for fracture and so underestimate the extent and magnitude of brittle deformation predicted in these models. On the other hand, rock mass shear strength can be greater than that predicted from Byerlee's law. The concept of rock mass strength is central to many engineering design studies in which calculated stresses are used to predict brittle fracture, and this experience indicates that brittle strength envelopes which assume properties for intact rock (Griffith parabolas) or sliding along a single, continuous surface (Byerlee's law) inadequately characterize the tensile, compressive, and shear strengths of rock masses. The criterion adopted here to relate stresses to rock mass fracture is based on a Griffith-type curve for tensile normal stress and a concave downward curve for compressive normal stress. It is the only available criterion that explicitly considers the weakening effects of discontinuities within the rock mass on the stress state required for fracture.

Schultz, Richard A.↗

Assessment of multi-stage telescopic control rods in a pebble bed reactor. Part II: corrosion and wear performance

To support High-Temperature Gas-Cooled Reactor designs, the effects of corrosion and wear on a SS316L telescopic control rod prototype were investigated in helium at 775 °C with up to 5 ppm oxygen for durations up to 500 h. Three deployment conditions were tested to assess their impact on wear and oxide formation: severe cycles, daily cycles, and gravity-driven deployments. Here, a chromium-rich oxide layer developed on regions exposed to the helium flow, reaching up to 2 µm in the most affected areas. No carburization or decarburization was observed. Oxide breakthrough occurred mainly at grooves and contact points during severe cycling of the telescopic rod, while in the other tests it was limited to contact points. Friction forces increased due to oxide growth and thermal expansion, the latter being the dominant factor, but never enough to hinder rod deployment significantly. Coaxial misalignment of stages was identified as the main potential risk to reliable operation under normal conditions.

Control rod↗

Poromechanics of stick-slip frictional sliding and strength recovery on tectonic faults

Pore fluids influence many aspects of tectonic faulting including frictional strength aseismic creep and effective stress during the seismic cycle. But, the role of pore fluid pressure during earthquake nucleation and dynamic rupture remains poorly understood. Here we report on the evolution of pore fluid pressure and porosity during laboratory stick-slip events as an analog for the seismic cycle. We sheared layers of simulated fault gouge consisting of glass beads in a double-direct shear configuration under true triaxial stresses using drained and undrained fluid conditions and effective normal stress of 5–10 MPa. Shear stress was applied via a constant displacement rate, which we varied in velocity step tests from 0.1 to 30 µm/s. Here, we observe net pore pressure increases, or compaction, during dynamic failure and pore pressure decreases, or dilation, during the interseismic period, depending on fluid boundary conditions. In some cases, a brief period of dilation is attendant with the onset of dynamic stick slip. Our data show that time-dependent strengthening and dynamic stress drop increase with effective normal stress and vary with fluid conditions. For undrained conditions, dilation and preseismic slip are directly related to pore fluid depressurization; they increase with effective normal stress and recurrence time. Microstructural observations confirm the role of water-activated contact growth and shear-driven elastoplastic processes at grain junctions. These results indicate that physicochemical processes acting at grain junctions together with fluid pressure changes dictate stick-slip stress drop and interseismic creep rates and thus play a key role in earthquake nucleation and rupture propagation.

58 GEOSCIENCES↗

The Effects of Shear Strain, Fabric, and Porosity Evolution on Elastic and Mechanical Properties of Clay-Rich Fault Gouge

The elastic and mechanical properties of fault gouge are key controls on fault zone stiffness, strength, damage, healing, and sliding stability. Clay minerals are prevalent in fault zones and have significant effects on friction, porosity, elastic properties, and shear fabric development. Although clay-rich gouges are well studied, the roles of porosity evolution and fabric formation in modulating elastic and mechanical properties are unclear. We have found that with progressive shear, the role of strain localization and fabric development may compete with densification to control the evolution of friction and elastic moduli. We report on a suite of double-direct shear experiments on synthetic gouge composed of 50% Ca-montmorillonite and 50% granular quartz at a normal stress of 25 MPa. We measure the coefficient of friction, porosity, P and S wave speeds, and bulk and shear moduli, and their evolution with shearing, to shear strains up to ~25. We find that the evolution of Vp, Vs, and elastic moduli are controlled by the interplay of porosity loss, shear fabric development, and particle contact stiffness. In general, V p , V s , and elastic moduli increase with shear strain and are accompanied by gradual densification and porosity loss. However, at intermediate shear strains (~2–8) a decrease in V p , V s , and elastic moduli is superimposed on this overall trend. Based on previous microstructural studies, we hypothesize that fabrics develop parallel to shear direction (perpendicular to wave propagation) over this range of strains, leading to reduced fault stiffness and competing with porosity loss as the dominant control on elastic properties.

58 GEOSCIENCES↗

Effect of grain dissolution on sloping ground

The static and dynamic stability of natural or constructed slopes can be affected by dissolution or dissolution-like phenomena. Their underlying mechanisms, however, remain unclear. New experimental results and discrete element simulations provide particle-level and macroscale information on the consequences of mineral dissolution on slope behavior. At the microscale, load-carrying grain arches develop around dissolving particles, the porosity increases, and contact force chains evolve to form a honeycomb topology. At the macroscale, while vertical settlements are the prevailing deformation pattern, lateral granular movements that create mass wasting are prominent in sloping ground, even under the quasi-static granular loss. Horizontal grain displacement is maximum at the surface and decreases linearly with the distance from the slope surface to become zero at the bottom boundaries, much like vertical granular displacement along the depth. Sediments with smaller friction angles and steeper slopes experience greater displacement, both vertically and horizontally. Slopes become flatter after dissolution, with the reduction in slope angle directly related to the loss in ground elevation, ΔH/H o . Yet, because of the porous fabric that results from dissolution, vertical shortening is less than the upper bound, estimated from the loss in the solid mass fraction, ΔH/H o ≈SF. Under water-saturated conditions, the post-dissolution fabric may lead to sudden undrained shear and slope slide.

42 ENGINEERING↗

Mesoscale simulations of pressure-shear loading of granular tungsten carbide

Numerical simulations of pressure-shear loading of a granular material are performed using the shock physics code CTH. A simple mesoscale model for the granular material is used that consists of a randomly packed arrangement of solid circular or spherical grains of uniform size separated by vacuum. The grain material is described by a simple shock equation of state, elastic perfectly plastic strength model, and fracture model with baseline parameters for WC taken from previous mesoscale modeling work. Simulations using the baseline material parameters are performed at the same initial conditions of pressure-shear experiments on dry WC powders. Except for some localized flow regions appearing in simulations with an approximate treatment of sliding interfaces among grains, the samples respond elastically during shear, which is in contrast to experimental observations. By extending the simulations to higher shear wave amplitudes, macroscopic shear failure of the simulated samples is observed with the shear strength increasing with increasing stress confinement. The shear strength is also found to be strongly dependent on the grain interface treatment and on the fracture stress of the grains, though the variation in shear strength due to fracture stress decreases with increasing stress confinement. At partial compactions, the transverse velocity histories show strain-hardening behavior followed by formation of a shear interface that extends through the transverse dimensions of the sample. Near full compaction, no strain hardening is observed and, instead, the sample transitions sharply from an elastic response to formation of an internal shear interface. Agreement with experiment is shown to worsen with increasing confinement stress with simulations overpredicting the shear strengths measured in experiment. The source of the disagreement can be ultimately attributed to the Eulerian nature of the simulations, which do not treat contact and fracture realistically.

36 MATERIALS SCIENCE↗