Search NASA⌕ Search

SEARCH · Search NASA

Results for “SULFURIC ACID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Spectral radiometry and tropospheric aerosols: Report of panel

The term aerosols, as used here, refers to the haze, smoke, and dust that appear in the troposphere. The term does not refer to the hydrometeors in cumulus and stratus clouds but does include the sulfuric acid-water droplets which are assumed to predominate in the stratospheric aerosol layer. The aerosol properties that were measured from satellites and those which can be made in the near term (up to 1992) will be reviewed. The capabilities that will exist in the years 1992 to 2000, with implementation of EOS, are then discussed. Finally, a few words will be said concerning the potential for aerosol measurements for the decade after 2000.

Fraser, Robert S.↗

Inference of stratospheric aerosol composition and size distribution from SAGE II satellite measurements

A method for inferring stratospheric aerosol composition and size distribution from the water vapor concentration and aerosol extinction measurements obtained in the Stratospheric Aerosol and Gas Experiment (SAGE) II and the associated temperature from the NMC. The aerosols are assumed to be sulfuric acid-water droplets. A modified Levenberg-Marquardt algorithm is used to determine model size distribution parameters based on the SAGE II multiwavelength aerosol extinctions. It is found that the best aerosol size information is contained in the aerosol radius range between about 0.25 and 0.80 micron.

Wang, Pi-Huan↗

BOREAS TE-1 SSA Soil Lab Data

This data set was collected by TE-1 to provide a set of soil properties for BOREAS investigators in the SSA. The soil samples were collected at sets of soil pits in 1993 and 1994. Each set of soil pits was in the vicinity of one of the five flux towers in the BOREAS SSA. The collected soil samples were sent to a lab, where the major soil properties were determined. These properties include, but are not limited to, soil horizon; dry soil color; pH; bulk density; total, organic, and inorganic carbon; electric conductivity; cation exchange capacity; exchangeable sodium, potassium, calcium, magnesium, and hydrogen; water content at 0.01, 0.033, and 1.5 MPascals; nitrogen; phosphorus; particle size distribution; texture; pH of the mineral soil and of the organic soil; extractable acid; and sulfur. The data are stored in tabular ASCII text files. The data files are available on a CD-ROM (see document number 20010000884), or from the Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC).

Hall, Forrest G.↗

BOREAS TE-2 NSA Soil Lab Data

This data set contains the major soil properties of soil samples collected in 1994 at the tower flux sites in the Northern Study Area (NSA). The soil samples were collected by Hugo Veldhuis and his staff from the University of Manitoba. The mineral soil samples were largely analyzed by Barry Goetz, under the supervision of Dr. Harold Rostad at the University of Saskatchewan. The organic soil samples were largely analyzed by Peter Haluschak, under the supervision of Hugo Veldhuis at the Centre for Land and Biological Resources Research in Winnipeg, Manitoba. During the course of field investigation and mapping, selected surface and subsurface soil samples were collected for laboratory analysis. These samples were used as benchmark references for specific soil attributes in general soil characterization. Detailed soil sampling, description, and laboratory analysis were performed on selected modal soils to provide examples of common soil physical and chemical characteristics in the study area. The soil properties that were determined include soil horizon; dry soil color; pH; bulk density; total, organic, and inorganic carbon; electric conductivity; cation exchange capacity; exchangeable sodium, potassium, calcium, magnesium, and hydrogen; water content at 0.01, 0.033, and 1.5 MPascals; nitrogen; phosphorus: particle size distribution; texture; pH of the mineral soil and of the organic soil; extractable acid; and sulfur. These data are stored in ASCII text files. The data files are available on a CD-ROM (see document number 20010000884), or from the Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC).

Veldhuis, Hugo↗

(abstract) Constraints on the Venus Deep Atmosphere Composition from Near Infrared Observations of the Night Side

Spatially resolved NIR images and spectra of Venus obtained in 1983 revealed high-contrast emission features on the night side of the planet at wavelengths near 1.74 and 2.3 (micro)m. Subsequent observational and modeling studies confirmed that this radiation originates as thermal emission from the hot lower atmosphere (25-40 km).

Venus water vapor near infrared sulfuric acid surf↗

Stress Corrosion Evaluation of Various Metallic Materials for the International Space Station Water Recycling System

A stress corrosion evaluation was performed on Inconel 625, Hastelloy C276, titanium commercially pure (TiCP), Ti-6Al-4V, Ti-6Al-4V extra low interstitial, and Cronidur 30 steel as a consequence of a change in formulation of the pretreatment for processing the urine in the International Space Station Environmental Control and Life Support System Urine Processing Assembly from a sulfuric acid-based to a phosphoric acid-based solution. The first five listed were found resistant to stress corrosion in the pretreatment and brine. However, some of the Cronidur 30 specimens experienced reduction in load-carrying ability.

Torres, P. D.↗

Lessons from Earth Aerobiology for Venus Astrobiology

Venus’s clouds have often suggested as a possible habitat. The constraints governing putative airborne life in such a habitat in turn inform priorities and strategies for remote and in situ exploration, methods by which resulting biosignatures might be detected, exoplanet habitability assessment, and planetary protection concerns. Lessons drawn from studying Earth’s aerobiosphere can help improve this understanding. There are altitude ranges within Venus’s clouds in which temperature, pressure, particle size, and radiation appear to be within the limits of microbial life on Earth, and life cycles involving S- and Fe-based redox metabolism have been proposed. However, given the lack of a habitable surface reservoir, a long-term stable Venus aerobiosphere would require that the reproduction rate of the airborne microbes be faster than the settling rate of airborne microbes due to gravity, or eventually the population would be depleted; put another way, the mean generation time would need to exceed the mean residence time. This creates a joint constraint of aerosol dynamics, potential nutrient availability and energy influx, and bioenergetic costs such as desiccation and radiation damage. Even at an optimistic estimate of 75% H2SO4, Venus aerosol water activity (aw) is still ~0.02, far below the observed microbial growth limit of ~0.6. Long-term desiccation with brief spurts of repair and growth in response to transient water influx, such as from volcanism, is the most likely model for Earth-like life on Venus – a ‘desert bloom’ scenario. Several high-priority science goals – cloud aerosol composition, internal radiative flux, and aerosol residence time and circulation models – thus will also improve our understanding of Venus in an astrobiology context. In Earth’s troposphere, warm water clouds can carry 103 – 105 cells/mL, some metabolically active. However, Earth’s stratospheric sulfate aerosol layer may be a better analogue: supercooled sulfuric acidaerosols (acid weight fraction 0.6 – 0.85, 0.1 – 1 μm diameter, 0.1 – 1 cm-3) with little water activity, long residence times, high UV radiation, and only sporadic influx from surface particle sources. Though ‘hot spots’ can occur associated with tropospheric mixing, viable cells in stratospheric samples are rare (~102 cells/m3), and primarily inactive forms such as spores. It is not yet clear whether such bioaerosols are associated with sulfate aerosols or simply co-located, and reproduction in situ has not yet been observed. In this model of a sparse, largely dormant Venus ecosystem, a single transect on descent is likely to pass through a low-water, inactive region, missing potential signs of habitability or biosignatures. A targeted strategy would sample through an aerial region with some upwelling from surface sources, andtake multiple transects separated in time and space. This is compatible with other in situ science goals seeking to understand the dynamics and heterogeneities of Venus’s clouds.

Lower atmosphere↗

SO3/H2SO4 continuous real-time sensor demonstration at a power plant

We present results from field testing of a new, innovative sensor developed to measure SO3/H2SO4 continuously and in real time at a coal-fired power plant. The system utilizes the sensitivity, specificity, and real-time capabilities of mid-infrared (Mid-IR) laser-based sensor technology, along with a heated, close-coupled cell mounted directly to a power plant duct. Measurements were made by the laser sensor over a 2-day period and compared to results from the accepted method, EPA 8A, which requires a 30-minute collection, labor intensive processing, and off-site analysis at a lab. In contrast to the condensation method, the laser sensor continuously samples flue gas and reports measurements of the concentration of SO3/H2SO4, SO2 ever second with unattended operation. This initial demonstration proved the sensor concept and paves the way for its use for optimizing sorbent injection used to neutralize SO3/H2SO4. Optimized sorbent injection will enable significant cost savings associated with efforts to mitigate the presence and effects of SO3/H2SO4 such as “Blue Plume”, air heater fouling, and duct corrosion. In particular, the real-time, actionable information will enable better control of additive injection in flex conditions and variable fuels.

20 FOSSIL-FUELED POWER PLANTS↗

Thermally stable porous catalyst systems and methods to produce the same

This disclosure provides compositions and methods directed to thermally stable catalyst systems, which display stable physical properties and/or stable catalytic properties after thermal pretreatment at a temperature in the range of about 600° C. to about 1000° C. The catalyst systems include metal particles which contain a stable metal and a catalytic metal deposited on a porous support. Embodiments of the disclosure include catalyst systems that can be used in high temperature applications such as the hybrid sulfur cycle. The hybrid sulfur cyclic is an elevated temperature and high acid reaction that may be conducted using concentrated sulfuric acid heated to 800° C. Embodiments of the disclosure can provide thermally stable catalysts and methods to produce thermally stable catalysts that remain active for at least 80 hours' exposure to these harsh conditions.

Monnier, John↗

A High-Rate Aqueous Proton Battery Delivering Power Below -78 °C via an Unfrozen Phosphoric Acid

Lithium-sulfur batteries are attractive for automobile and grid applications due to their high theoretical energy density and the abundance of sulfur. Despite the significant progress in cathode development, lithium metal degradation and the polysulfide shuttle remain two critical challenges in the practical application of Li-S batteries. Development of advanced electrolytes has become a promising strategy to simultaneously suppress lithium dendrite formation and prevent polysulfide dissolution. Here, a new class of concentrated siloxane-based electrolytes, demonstrating significantly improved performance over the widely investigated ether-based electrolytes are reported in terms of stabilizing the sulfur cathode and Li metal anode as well as minimizing flammability. Through a combination of experimental and computational investigation, it is found that siloxane solvents can effectively regulate a hidden solvation-ion-exchange process in the concentrated electrolytes that results from the interactions between cations/anions and solvents. As a result, it could invoke a quasi-solid-solid lithiation and enable reversible Li plating/stripping and robust solid-electrolyte interphase chemistries. The solvation-ion-exchange process in the concentrated electrolytes is a key factor in understanding and designing electrolytes for other high-energy lithium metal batteries.

25 ENERGY STORAGE↗

Acid rain at Kennedy Space Center, Florida - Recent observations

During the period July, 1977 to September, 1979, rainfall was collected in the vicinity of the Kennedy Space Center and subjected to appropriate chemical analysis for purposes of characterization of general composition and acidity. Results obtained form the basis for future comparisons, should significant alteration of the chemical composition of rain occur during the space shuttle era. Acidity extremes calculated on a monthly basis from event samples collected from five sites within a 200 sq km area varied from pH 5.1 in November, 1977, and April, 1978 to pH 4.3 in July, 1978 and July, 1979. Weighted average pH for the entire period was 4.55. Acidity was due to the presence of sulfuric and nitric acids. The mole ratio of excess SO4(-2):NO3(-) was typically greater than one. Monthly weighted average Cl(-) concentrations ranged from 20-240 micromoles/liter. The Cl(-):Na(+) ratio was slightly lower than that present in sea water.

Madsen, B. C.↗

Chemical Composition and Mixing State of Wintertime Aerosol from the European Arctic Site of Ny-Ålesund, Svalbard

The Arctic is rapidly warming, and aerosols play an increasingly important role by scattering and absorbing sunlight and by participating in cloud formation. Their optical and cloud-forming properties depend on the mixing state and chemical composition, but observations of these features remain limited. This study comprehensively characterizes 25,254 individual particles collected at Ny-Ålesund, Svalbard (November −December 2020), using microspectroscopy techniques to investigate their size, morphology, mixing state, and chemical composition. Fresh sea salt aerosols (SSA) were identified as the most abundant (∼85%), of the total observed aerosol population, with potential sources from sea spray and blowing snow. Air masses originating from the Arctic Ocean surrounding Svalbard likely contribute to increased concentrations of sub-micrometer “Fresh SSA” particles. “Aged SSA” particles (7.4%) are enriched in sulfur and nitrogen, compared to “Fresh SSA”. These elevated ratios may result from various atmospheric aging processes including the uptake of sulfuric and nitric acids. Here, our results suggest that aged SSA, with sizes larger than 300 nm, likely underwent chlorine depletion by sulfuric and nitric acids during transport. Additionally, elemental analysis reveals that both fresh and aged SSA can mix with dust particles, regardless of the SSA size (49.9% in sub-micrometer size and 50.1% in super-micrometer size, respectively). Dust particles are efficient ice-nucleating particles (INPs), and SSA is known to act as cloud condensation nuclei (CCN), and therefore, their mixtures may inherit both properties. The non-negligible number (4.4%) of SSA-dust mixtures underscores the importance of these particles as potential sources of CCN and INP in the Arctic atmosphere.

Arctic↗

Stratospheric Heterogeneous Chemistry and Microphysics: Model Development, Validation and Applications

The objectives of this project are to: define the chemical and physical processes leading to stratospheric ozone change that involve polar stratospheric clouds (PSCS) and the reactions occurring on the surfaces of PSC particles; study the formation processes, and the physical and chemical properties of PSCS, that are relevant to atmospheric chemistry and to the interpretation of field measurements taken during polar stratosphere missions; develop quantitative models describing PSC microphysics and heterogeneous chemical processes; assimilate laboratory and field data into these models; and calculate the extent of chemical processing on PSCs and the impact of specific microphysical processes on polar composition and ozone depletion. During the course of the project, a new coupled microphysics/physical-chemistry/ photochemistry model for stratospheric sulfate aerosols and nitric acid and ice PSCs was developed and applied to analyze data collected during NASA's Arctic Airborne Stratospheric Expedition-II (AASE-II) and other missions. In this model, detailed treatments of multicomponent sulfate aerosol physical chemistry, sulfate aerosol microphysics, polar stratospheric cloud microphysics, PSC ice surface chemistry, as well as homogeneous gas-phase chemistry were included for the first time. In recent studies focusing on AASE measurements, the PSC model was used to analyze specific measurements from an aircraft deployment of an aerosol impactor, FSSP, and NO(y) detector. The calculated results are in excellent agreement with observations for particle volumes as well as NO(y) concentrations, thus confirming the importance of supercooled sulfate/nitrate droplets in PSC formation. The same model has been applied to perform a statistical study of PSC properties in the Northern Hemisphere using several hundred high-latitude air parcel trajectories obtained from Goddard. The rates of ozone depletion along trajectories with different meteorological histories are presently being systematically evaluated to identify the principal relationships between ozone loss and aerosol state. Under this project, we formulated a detailed quantitative model that predicts the multicomponent composition of sulfate aerosols under stratospheric conditions, including sulfuric, nitric, hydrochloric, hydrofluoric and hydrobromic acids. This work defined for the first time the behavior of liquid ternary-system type-1b PSCS. The model also allows the compositions and reactivities of sulfate aerosols to be calculated over the entire range of environmental conditions encountered in the stratosphere (and has been incorporated into a trajectory/microphysics model-see above). Important conclusions that derived from this work over the last few years include the following: the HNO3 content of liquid-state aerosols dominate PSCs below about 195 K; the freezing of nitric acid ice from sulfate aerosol solutions is likely to occur within a few degrees K of the water vapor frost point; the uptake and reactions of HCl in liquid aerosols is a critical component of PSC heterogeneous chemistry. In a related application of this work, the inefficiency of chlorine injection into the stratosphere during major volcanic eruptions was explained on the basis of nucleation of sulfuric acid aerosols in rising volcanic plumes leading to the formation of supercooled water droplets on these aerosols, which efficiently scavenges HCl via precipitation.

Turco, Richard P.↗