Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sensitivity analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Reliability and cost: A sensitivity analysis

In the design phase of a system, how a design engineer or manager choose between a subsystem with .990 reliability and a more costly subsystem with .995 reliability is examined, along with the justification of the increased cost. High reliability is not necessarily an end in itself but may be desirable in order to reduce the expected cost due to subsystem failure. However, this may not be the wisest use of funds since the expected cost due to subsystem failure is not the only cost involved. The subsystem itself may be very costly. The cost of the subsystem nor the expected cost due to subsystem failure should not be considered separately but the total of the two costs should be maximized, i.e., the total of the cost of the subsystem plus the expected cost due to subsystem failure.

Suich, Ronald C.↗
NASA NTRS1991

Aerodynamic shape optimization using sensitivity analysis on third-order Euler equations

Two major advancements of an aerodynamic optimization method with two design variables are described. The first is represnted by an improved flow prediction method that uses the third-order accurate discretization of the Euler equations. This method makes it possible to predict the flowfield of a perturbed shape which generates shocks and other large gradients without intermediate CFD analysis. The second advancement is the use of every surface grid point as a design variable in the aerodynamic shape optimization problem. The improved algorithm is demonstrated by optimizing the ramp shape of a scramjet-afterbody configuration for maximum axial thrust. It is concluded that the improved flow-field prediction method eliminates most of the flow analysis and a priori guessing of all possible shapes from which the optimum is to be selected.

Baysal, Oktay↗
NASA NTRS1992

Numerical sensitivity analysis of passive EHF and SMMW channels to tropospheric water vapor, clouds, and precipitation

Potential uses of specific extremely High Frequency (EHF) and Sub-Millimeter-Wave (SMMW) channels at 90, 166, 183, 220, 325, 340, and 410 GHz for passive spaceborne remote sensing of the troposphere and lower stratosphere are investigated using an iterative numerical radiative transfer model. Collectively, these channels offer potential for high spatial resolution imaging using diffraction-limited apertures of practical size, along with the ability to profile water vapor, map precipitation beneath optically opaque cloud cover, and to measure nonprecipitating cloud (e.g., cirrus) parameters. A widely-spaced set of EHF and SMMW channels can yield observable degrees of freedom related to clouds and precipitation not available by exclusively using the more thoroughly studied microwave channels below 183 GHz. A new passive airborne imaging instrument for tropospheric meteorological sensing is described.

Gasiewski, A. J.↗
NASA NTRS1993

Airfoil shape optimization using sensitivity analysis on viscous flow equations

An aerodynamic shape optimization method has previously been developed by the authors using the Euler equations and has been applied to supersonic-hypersonic nozzle designs. This method has also included a flowfield extrapolation (or flow prediction) method based on the Taylor series expansion of an existing CFD solution. The present paper reports on the extension of this method to the thin-layer Navier-Stokes equations in order to account for the viscous effects. Also, to test the method under highly nonlinear conditions, it has been applied to the transonic flows. Initially, the success of the flow prediction method is tested. Then, the overall method is demonstrated by optimizing the shapes of two supercritical transonic airfoils at zero angle of attack. The first one is shape optimized to achieve a minimum drag while obtaining a lift above a specified value. Whereas, the second one is shape optimized for a maximum lift while attaining a drag below a specified value. The results of these two cases indicate that the present method can produce successfully optimized aerodynamic shapes.

Eleshaky, Mohamed E.↗
NASA NTRS1990

An efficient design sensitivity analysis of eigenvectors

Subspace iteration has been a major advance in solving large eigen problems when only a subset of eigen-pairs is required. The essence of this method is a transformation from displacement coordinates of an n-th order eigensystem to generalized coordinates of a smaller q-th order. The eigenvalue problem is then solved in the reduced space. The method was first developed by Clint and Jennings for real symmetric systems and was then called 'simultaneous iteration'. The success of the method prompted further research along this line and there have been many improved algorithms developed. This approach has been widely used by structural engineers for extracting the most useful natural frequencies and mode shapes of large-scale dynamic systems. This paper exploits into a new direction which is in the form of iterative process for simultaneously calculating eigenvector derivatives of many eigenvectors with respect to multi-variables. The method fully uses all the available information from preceding eigenvalue solution and, thus, effectively economizes computational efforts. It iterates through two equations derived from the first variation of the two fundamental equations used in subspace iteration method. There is no expensive large matrix decomposition required and the process converges to acceptable solution in a finite number of iterations. Therefore, the procedure increases its efficiency superiority over the others as the system size or the number of interested eigenvectors become larger and larger.

Ting, T.↗
NASA NTRS1992

Defect-sensitivity analysis of an SEU immune CMOS logic family

Fault testing of resistive manufacturing defects is done on a recently developed single event upset immune logic family. Resistive ranges and delay times are compared with those of traditional CMOS logic. Reaction of the logic to these defects is observed for a NOR gate, and an evaluation of its ability to cope with them is determined.

Ingermann, Erik H.↗
NASA NTRS1994

Enhanced orbit determination filter sensitivity analysis: Error budget development

An error budget analysis is presented which quantifies the effects of different error sources in the orbit determination process when the enhanced orbit determination filter, recently developed, is used to reduce radio metric data. The enhanced filter strategy differs from more traditional filtering methods in that nearly all of the principal ground system calibration errors affecting the data are represented as filter parameters. Error budget computations were performed for a Mars Observer interplanetary cruise scenario for cases in which only X-band (8.4-GHz) Doppler data were used to determine the spacecraft's orbit, X-band ranging data were used exclusively, and a combined set in which the ranging data were used in addition to the Doppler data. In all three cases, the filter model was assumed to be a correct representation of the physical world. Random nongravitational accelerations were found to be the largest source of error contributing to the individual error budgets. Other significant contributors, depending on the data strategy used, were solar-radiation pressure coefficient uncertainty, random earth-orientation calibration errors, and Deep Space Network (DSN) station location uncertainty.

Estefan, J. A.↗
NASA NTRS1997

Methods for Sensitivity Analysis in Gradient-Based Shape Optimization: A Review

CFD is now being widely used in the design of mechanical and aerospace systems and their components. Improving the accuracy and efficiency of this process can reduce its cost and increase its effectiveness. Other motivating factors that push and pull CFD into design optimization are; (1) the need for design methodologies (single- and multi-disciplinary) to reduce cost and time in developing new fluid and aero systems for fast response to market changes; (2) new design requirements outside existing database; (3) new CFD algorithms and growth in computing power; (4) need for increased product quality and reliability; (5) lack of test facilities; (6) limitations and cost of testing techniques; (7) limitations of existing design practices; and (8) prohibitive cost of and conflicting designs derived from isolated component analyses and design, which are repetitive in nature and omit mutual interference.

Baysal, Oktay↗
NASA NTRS1998

Sensitivity Analysis of Data Link Alternatives for LVLASO

As part of this research, we have modeled the Mode-S system when used to enhance communications among several ground vehicles to facilitate low-visibility landing and surface operations. The model has then been simulated using Bones Designer software. The effectiveness of the model has been evaluated under several conditions: (i) different number of vehicles (100, 200, and 300), (ii) different distributions of interarrival times for squitters: uniform, exponential, and constrained exponential, and (iii) Different safe distances (for collision purpose): squitter length, 1.5*squitter length, and 2* squitter length. The model has been developed in a modular fashion to facilitate any future modifications. The results from the simulations suggest that the Mode S system is indeed capable of functioning satisfactorily even when covering up to 300 vehicles. Certainly, about 10 percent of the squitters undergo collisions and hence the interarrival times for these is much larger than the expected time of 500 msec. In fact, the delay could be as much as 2 seconds. The model could be further enhanced to incorporate more realistic scenarios.

Mukkamala, Ravi↗