Search NASA⌕ Search

SEARCH · Search NASA

Results for “Simulation methods.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Higher-level simulations of turbulent flows

The fundamentals of large eddy simulation are considered and the approaches to it are compared. Subgrid scale models and the development of models for the Reynolds-averaged equations are discussed as well as the use of full simulation in testing these models. Numerical methods used in simulating large eddies, the simulation of homogeneous flows, and results from full and large scale eddy simulations of such flows are examined. Free shear flows are considered with emphasis on the mixing layer and wake simulation. Wall-bounded flow (channel flow) and recent work on the boundary layer are also discussed. Applications of large eddy simulation and full simulation in meteorological and environmental contexts are included along with a look at the direction in which work is proceeding and what can be expected from higher-level simulation in the future.

Ferziger, J. H.↗

Radiation effects on spacecraft materials for Jupiter and near-earth Orbiters

An overview of radiation effects on spacecraft materials is given in this paper. Specifically, the environment of the Jupiter Orbiting Spacecraft, Galileo, is treated along with analysis methods and simulated testing. Summaries of previous and present material test results are given. Preliminary results of surface erosion on insulation from a Space Shuttle experiment are summarized.

Bouquet, F. L.↗

A Lagrangian method for a two layer shallow water model

One of the biggest drawbacks of Eulerian methods is the presence of the nonlinear convective terms which leads to inaccurate representations of advection and fronts. An alternative and conceptually simpler approach is the Lagrangian approach in which the fluid particles themselves are tracked and equations are derived based on local spatial interaction. In this formulation the nonlinear convective terms do not appear. The main drawback with the Lagrangian formulation, however, is that the local spatial interactions are time dependent. That is, at each time level, one must know the current neighbors of a given particle to accurately compute the forces acting on the particle. The Voroni Mesh which is continuously deforming and always linking nearest neighbors is needed. The effectiveness of a simple Lagrangian method for simulating the onset of a Kelvin-Helmholtz instability in a 2 layer fluid is demonstrated.

Augenbaum, J. M.↗

Prediction of Battery Life and Behavior from Analysis of Voltage Data

A method for simulating charge and discharge characteristics of secondary batteries is discussed. The analysis utilizes a nonlinear regression technique where empirical data is computer fitted with a five coefficient nonlinear equation. The equations for charge and discharge voltage are identical except for a change of sign before the second and third terms.

Mcdermott, P. P.↗

System Analysis for the Huntsville Operation Support Center, Distributed Computer System

HOSC as a distributed computing system, is responsible for data acquisition and analysis during Space Shuttle operations. HOSC also provides computing services for Marshall Space Flight Center's nonmission activities. As mission and nonmission activities change, so do the support functions of HOSC change, demonstrating the need for some method of simulating activity at HOSC in various configurations. The simulation developed in this work primarily models the HYPERchannel network. The model simulates the activity of a steady state network, reporting statistics such as, transmitted bits, collision statistics, frame sequences transmitted, and average message delay. These statistics are used to evaluate such performance indicators as throughout, utilization, and delay. Thus the overall performance of the network is evaluated, as well as predicting possible overload conditions.

Ingels, F. M.↗

Restoration of multichannel microwave radiometric images

A constrained iterative image restoration method is applied to multichannel diffraction-limited imagery. This method is based on the Gerchberg-Papoulis algorithm utilizing incomplete information and partial constraints. The procedure is described using the orthogonal projection operators which project onto two prescribed subspaces iteratively. Its properties and limitations are presented. The effect of noise was investigated and a better understanding of the performance of the algorithm with noisy data has been achieved. The restoration scheme with the selection of appropriate constraints was applied to a practical problem. The 6.6, 10.7, 18, and 21 GHz satellite images obtained by the scanning multichannel microwave radiometer (SMMR), each having different spatial resolution, were restored to a common, high resolution (that of the 37 GHz channels) to demonstrate the effectiveness of the method. Both simulated data and real data were used in this study. The restored multichannel images may be utilized to retrieve rainfall distributions.

Chin, R. T.↗

Modified Denavit-Hartenberg parameters for better location of joint axis systems in robot arms

The Denavit-Hartenberg parameters define the relative location of successive joint axis systems in a robot arm. A recent justifiable criticism is that one of these parameters becomes extremely large when two successive joints have near-parallel rotational axes. Geometrically, this parameter then locates a joint axis system at an excessive distance from the robot arm and, computationally, leads to an ill-conditioned transformation matrix. In this paper, a simple modification (which results from constraining a transverse vector between successive joint rotational axes to be normal to one of the rotational axes, instead of both) overcomes this criticism and favorably locates the joint axis system. An example is given for near-parallel rotational axes of the elbow and shoulder joints in a robot arm. The regular and modified parameters are extracted by an algebraic method with simulated measurement data. Unlike the modified parameters, extracted values of the regular parameters are very sensitive to measurement accuracy.

Barker, L. K.↗

Turbulent magnetic reconnection

The results of two-dimensional spectral-method MHD simulations of the effect of turbulence on magnetic-reconnection processes are presented in extensive graphs and tables and characterized in detail. In a periodic sheet-pinch configuration, early-onset, persistent turbulence is found to occur when a low level of broadband fluctuations is introduced into the initial data. Features observed include small-scale unsteady coherent electric-current and vorticity structures, enhanced viscous and resistive dissipation, unsteady and spatially asymmetric fluid flow, large-scale and small-scale magnetic islands, multiple X points, large-amplitude electric-field fluctuations, and spectral characteristics indicating that the turbulence is broadband in both spatial directions and similar to homogeneous MHD turbulence. The importance of reconnection for studies of solar, magnetospheric, and laboratory plasmas in inhomogeneous magnetic fields is indicated.

Matthaeus, W. H.↗

Direct simulation of stagnation streamline flow for hypersonic reentry

The direct simulation Monte Carlo (DSMC) method is applied to simulate one-dimensional flow along the stagnation streamline. The freestream conditions considered are those encountered by the nose region of the Space Shuttle Orbiter during the hypersonic reentry. The range of altitudes (75 to 92 km) considered in the present calculations covers continuum to the less rarefied portion of the transition flow regime. The calculations account for thermal as well as the chemical nonequilibrium effects. The attention is focused on the flow structure along the stagnation streamline for different specified shock locations at a given altitude. The effect of shock location on the stagnation-point gas composition and heat transfer is analyzed for specific altitude; consequently, these results are appropriate for hemispherical bodies with different nose radii. Finally, comparison is made between the present DSMC results and the viscous shock-layer calculations, which show good agreement at the lowest altitude.

Dogra, Virendra K.↗

Controlled Ecological Life Support System: Regenerative Life Support Systems in Space

A wide range of topics related to the extended support of humans in space are covered. Overviews of research conducted in Japan, Europe, and the U.S. are presented. The methods and technologies required to recycle materials, especially respiratory gases, within a closed system are examined. Also presented are issues related to plant and algal productivity, efficiency, and processing methods. Computer simulation of closed systems, discussions of radiation effects on systems stability, and modeling of a computer bioregenerative system are also covered.

Macelroy, Robert D.↗

Recommendations for ground effects research for V/STOL and STOL aircraft and associated equipment for large scale testing

The current understanding of the effects of ground proximity on V/STOL and STOL aircraft is reviewd. Areas covered include (1) single jet suckdown in hover, (2) fountain effects on multijet configurations, (3) STOL ground effects including the effect of the ground vortex flow field, (4) downwash at the tail, and (5) hot gas ingestion in both hover and STOL operation. The equipment needed for large scale testing to extend the state of the art is reviewed and developments in three areas are recommended as follows: (1) improve methods for simulating the engine exhaust and inlet flows; (2) develop a model support system that can simulate realistic rates of climb and descent as well as steady height operation; and (3) develop a blowing BLC ground board as an alternative to a moving belt ground board to properly simulate the flow on the ground.

Kuhn, Richard E.↗

Comments on the 'early experimental validation' session of the Second International Conference on Tethers in Space

The paper summarizes the 'early experiment aspects' of the session which focused on the need for low cost, simple flight experiments to verify tether concepts, analysis methods and simulations and to build a data base for future application of tethers. The papers discussed six well thoughtout new space experiments, a modest start toward obtaining the data needed before tether concepts can be realistically expected to be adopted in real designs. Of the ninety-five papers included in the Venice conference, only six new small experiments were discussed. In-space verification of the data base needed to design operational tethers continues to be a step in the future.

Harris, Leonard A.↗

Large-scale experimental technology with remote sensing in land surface hydrology and meteorology

Two field experiments to study atmospheric and land surface processes and their interactions are summarized. The Hydrologic-Atmospheric Pilot Experiment, which tested techniques for measuring evaporation, soil moisture storage, and runoff at scales of about 100 km, was conducted over a 100 X 100 km area in France from mid-1985 to early 1987. The first International Satellite Land Surface Climatology Program field experiment was conducted in 1987 to develop and use relationships between current satellite measurements and hydrologic, climatic, and biophysical variables at the earth's surface and to validate these relationships with ground truth. This experiment also validated surface parameterization methods for simulation models that describe surface processes from the scale of vegetation leaves up to scales appropriate to satellite remote sensing.

Brutsaert, Wilfried↗

Helicopter flights with night-vision goggles: Human factors aspects

Night-vision goggles (NVGs) and, in particular, the advanced, helmet-mounted Aviators Night-Vision-Imaging System (ANVIS) allows helicopter pilots to perform low-level flight at night. It consists of light intensifier tubes which amplify low-intensity ambient illumination (star and moon light) and an optical system which together produce a bright image of the scene. However, these NVGs do not turn night into day, and, while they may often provide significant advantages over unaided night flight, they may also result in visual fatigue, high workload, and safety hazards. These problems reflect both system limitations and human-factors issues. A brief description of the technical characteristics of NVGs and of human night-vision capabilities is followed by a description and analysis of specific perceptual problems which occur with the use of NVGs in flight. Some of the issues addressed include: limitations imposed by a restricted field of view; problems related to binocular rivalry; the consequences of inappropriate focusing of the eye; the effects of ambient illumination levels and of various types of terrain on image quality; difficulties in distance and slope estimation; effects of dazzling; and visual fatigue and superimposed symbology. These issues are described and analyzed in terms of their possible consequences on helicopter pilot performance. The additional influence of individual differences among pilots is emphasized. Thermal imaging systems (forward looking infrared (FLIR)) are described briefly and compared to light intensifier systems (NVGs). Many of the phenomena which are described are not readily understood. More research is required to better understand the human-factors problems created by the use of NVGs and other night-vision aids, to enhance system design, and to improve training methods and simulation techniques.

Brickner, Michael S.↗

Metal matrix composite micromechanics: In-situ behavior influence on composite properties

Recent efforts in computational mechanics methods for simulating the nonlinear behavior of metal matrix composites have culminated in the implementation of the Metal Matrix Composite Analyzer (METCAN) computer code. In METCAN material nonlinearity is treated at the constituent (fiber, matrix, and interphase) level where the current material model describes a time-temperature-stress dependency of the constituent properties in a material behavior space. The composite properties are synthesized from the constituent instantaneous properties by virtue of composite micromechanics and macromechanics models. The behavior of metal matrix composites depends on fabrication process variables, in situ fiber and matrix properties, bonding between the fiber and matrix, and/or the properties of an interphase between the fiber and matrix. Specifically, the influence of in situ matrix strength and the interphase degradation on the unidirectional composite stress-strain behavior is examined. These types of studies provide insight into micromechanical behavior that may be helpful in resolving discrepancies between experimentally observed composite behavior and predicted response.

Murthy, P. L. N.↗

Reactionless gimbal actuator for precision pointing of large payloads

A novel actuator for application to precision pointing gimbal systems is described. The new actuator, dubbed the Reactuator, is capable of large output torques for payload pointing while minimizing reaction torques that can excite gimbal support structure. The Reactuator is able to approach reactionless operation by using an integral wheel to absorb the reaction torques. The advantages that result are described through analysis and simulation examples. Methods for designing control algorithms for the Reactuator are discussed and the results of preliminary breadboard tests are presented.

Laskin, R. A.↗

Effect of heavy rain on aviation engines

High bypass ratio gas turbine engines may ingest water and hail during flight in an environment of thunderstorms, and the performance and the operation-handling characteristics of the engine and its control become affected often substantially and critically. It is, therefore, of interest to establish predictive schemes for determining changes in performance of components and the total system. The current status of development of such predictive schemes is discussed along with illustrative examples. The needs for additional research are discussed, that are essential for improving: (1) the predictive schemes and (2) the methods of simulating in-rain flight conditions on ground.

Murthy, S. N. B.↗

Axisymmetric shell analysis of the Space Shuttle solid rocket booster field joint

The Space Shuttle Challenger (STS 51-L) accident led to an intense investigation of the structural behavior of the solid rocket booster (SRB) tang and clevis field joints. The presence of structural deformations between the clevis inner leg and the tang, substantial enough to prevent the O-ring seals from eliminating hot gas flow through the joints, has emerged as a likely cause of the vehicle failure. This paper presents results of axisymmetric shell analyses that parametrically assess the structural behavior of SRB field joints subjected to quasi-steady-state internal pressure loading for both the original joint flown on mission STS 51-L and the redesigned joint recently flown on the Space Shuttle Discovery. Discussion of axisymmetric shell modeling issues and details is presented and a generic method for simulating contact between adjacent shells of revolution is described. Results are presented that identify the performance trends of the joints for a wide range of joint parameters.

Nemeth, Michael P.↗