Measuring oxygen solubility in Ni grains and boundaries after oxidation using atom probe tomography
Not Available
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
Members of the genus Shewanella translocate deca- or undeca-heme cytochromes to the external cell surface thus enabling respiration using extracellular minerals and polynuclear Fe(III) chelates. The high resolution structure of the first undeca-heme outer membrane cytochrome, UndA, reveals a crossed heme chain with four potential electron ingress/egress sites arranged within four domains. Sequence and structural alignment of UndA and the deca-heme MtrF reveals the extra heme of UndA is inserted between MtrF hemes 6 and 7. The remaining UndA hemes can be superposed over the heme chain of the decaheme MtrF, suggesting that a ten heme core is conserved between outer membrane cytochromes. The UndA structure is the first outer membrane cytochrome to be crystallographically resolved in complex with substrates, an Fe(III)-nitrilotriacetate dimer or an Fe(III)-citrate trimer. The structural resolution of these UndA-Fe(III)-chelate complexes provides a rationale for previous kinetic measurements on UndA and other outer membrane cytochromes.
Not Available
Redox flow batteries (RFBs) are membrane-separated rechargeable flow cells with redox electrolytes, offering the potential for large-scale energy storage and supporting renewable energy grids. Yet, creating a cost-effective, high-performance RFB system is challenging. In this work, we investigate an Fe/Mn RFB alkaline system based on the [(TEA)Fe–O–Fe(TEA)] 3– / 4– and MnO 4 – / 2– redox couples with a theoretical cell voltage of ~1.43 V. This combination has not been systematically studied previously, but it can lead to a very low-cost and sustainable materials for high energy storage. Constant current cycling tests were performed at ±41 mA cm –2 between 20% and 80% SOC over 800 h (400 cycles) with an apparent Coulombic efficiency (CE) approaching 100%, while the voltage efficiency (VE) gradually decreased from ~75.3% to ~61.4% due to increasing internal resistances. Finally, the voltage efficiency loss can be mitigated through a periodic acid treatment to remove MnO 2 deposits from the separator.
Lithium-oxygen (Li-O2) batteries with high reversibility require a stable electrolyte against the side reactions with Li metal anode and reactive oxygen species. Moreover, an electrolyte which can effectively utilize the low partial pressure of oxygen in atmosphere has significance effect on the practical application lithium-air batteries. In this study, we developed a localized high concentration electrolyte (LHCE) using 1H,1H,5H-Octafluoropentyl 1,1,2,2-tetrafluoroethyl ether (OTE) as a diluent, which satisfies all these conditions at the same time. The OTE-based LHCE exhibits much improved electrochemical performances in Li-O2 batteries and Li-air batteries compared to the conventional electrolyte and high concentration electrolyte. The design principle of this novel electrolyte also provides an important guideline and reference for future researches of electrolytes in Li-O2 and Li-air batteries.
Not Available
We study the temperature and pressure dependence of phase evolution in the 0.5MgO-0.5Y{sub 2}O{sub 3} nanocomposite system using a diamond anvil apparatus in conjunction with in situ synchrotron energy dispersive x-ray diffraction at 7 GPa hydrostatic pressure. At (298 K, 7.0 GPa), structural transformations in the Y{sub 2}O{sub 3} phase are observed, giving rise to the co-existence of its cubic, hexagonal, and monoclinic polymorphs together with cubic MgO. An increase in temperature to 1273 K causes the crystallinity of the Y{sub 2}O{sub 3} hexagonal and monoclinic phases to increase. Isothermal and isobaric hold at (1273 K, 7.0 GPa) for 60 min results in yttrium dissolution in cubic MgO, causing {approx}1.0% expansive volumetric lattice strain despite the large differences in the ionic radii of the cations. Cooling the nanocomposite to (298 K, 0 GPa) after a 60 min soak yields four phase co-existence among cubic MgO and cubic, hexagonal, and monoclinic Y{sub 2}O{sub 3}. The residual MgO unit cell volume expansion is 0.69% at 298 K, indicating solid solution formation at room temperature despite large differences in the ionic radii of Mg{sup 2+} and Y{sup 3+}. The macroscopic shrinkage due to densification is 3% by volume. Thermodynamic considerations suggest that the relative molar partial volume of Y{sup 3+} in MgO is a negative quantity, indicating that the partial molar volume of Y{sup 3+} in the solid solution is smaller than its molar volume in the pure state. Aging of the nanocomposites for 240 h does not change the observed 4 phase co-existence. We propose a crystallographic model in which the observed volumetric expansion of the MgO unit cell is primarily attributed to two hydrostatic expansive strain components accompanying solid solution formation: (i) Coulomb repulsion among O{sup 2-} ions in the immediate vicinity of Mg{sup 2+} vacancies, and (ii) misfit strain due to differences in ionic radii upon Y{sup 3+} substitution on Mg{sup 2+} sites.
BaO-CaO-Al{sub 2}O{sub 3}-(10-x)B{sub 2}O{sub 3}-xCr{sub 2}O{sub 3} SiO{sub 2} (BCABS), where 1.0 {<=}x {<=} 3.5, (mol%) glasses were prepared by melt-quench technique. Glass samples were characterized for density, microhardness, thermal expansion coefficient and glass transition temperature. Scanning electron microscopy was used to see the homogeneity/solubility of Cr2O3 in this glass system. UV-VIS absorption measurements were carried out to see the Cr speciation in the glass samples. Density values were found to vary from 3.97 to 3.92 g/cc and microhardness values varied from 283 to 503 kg/mm{sup 2}. Glass transition temperature increased from 635 to 671 deg. C while TEC value found to varies from 8.3 to 11.1x10{sup -6}/ deg. C(30-300) with Cr{sub 2}O{sub 3} content. SEM study revealed phase separation in these glasses. From absorption studies we infer the presence of small amount of Cr (VI) along with Cr(III) oxidation state.
The specific features of oxygen dissolution in CdS using the example of single crystals grown by the gas-transport method with deviations from stoichiometry at 1100°C are considered. The effect of various types of intrinsic point defects in crystals of different composition on the form in the presence of oxygen is analyzed. It is shown that the most stable composition thermodynamically is that corresponding to nonstoichiometric “self-activated cadmium sulphide” stabilized with oxygen.
A literature review of oxalate oxidation processes finds that manganese(II)-catalyzed nitric acid oxidation of oxalate in precipitate filtrate is a viable and well-documented process. The process has been operated on the large scale at Savannah River in the past, including oxidation of 20 tons of oxalic acid in F-Canyon. Research data under a variety of conditions show the process to be robust. This process is recommended for oxalate destruction in H-Canyon in the upcoming program to produce feed for the MOX facility. Prevention of plutonium oxalate precipitation in filtrate can be achieved by concentrated nitric acid/ferric nitrate sequestration of oxalate. Organic complexants do not appear practical to sequester plutonium. Testing is proposed to confirm the literature and calculation findings of this review at projected operating conditions for the upcoming campaign. H Canyon plans to commence conversion of plutonium metal to low-fired plutonium oxide in 2012 for eventual use in the Mixed Oxide Fuel (MOX) Facility. The flowsheet includes sequential operations of metal dissolution, ion exchange, elution, oxalate precipitation, filtration, and calcination. All processes beyond dissolution will occur in HB-Line. The filtration step produces an aqueous filtrate that may have as much as 4 M nitric acid and 0.15 M oxalate. The oxalate needs to be removed from the stream to prevent possible downstream precipitation of residual plutonium when the solution is processed in H Canyon. In addition, sending the oxalate to the waste tank farm is undesirable. This report addresses the processing options for destroying the oxalate in existing H Canyon equipment.
The Savannah River Site (SRS) Liquid Waste System (LWS) contains approximately 66 tons of mercury within the liquids, salts, and sludges that are currently being processed into final wasteforms for disposal. Mercury concentrations within the system exceed those typically experienced in environmental or industrial systems; thus, management of mercury compounds continues to be a priority for SRS. In the LWS, waste is vitrified into a borosilicate glass wasteform that contains most of the radioactivity, while the lower activity solutions are dispositioned in a low-level grout wasteform, or “saltstone”. The alkaline, high ionic strength caustic wastes are pumped, evaporated, and otherwise managed throughout the LWS and Defense Waste Processing Facility (DWPF) as they are stored and prepared for conversion to the final wasteforms. Because of the complexity of this system, a key component of effective mercury management in the LWS requires analysis of mercury in various physical phases. The high concentration of mercury within the SRS LWS has the potential to generate vapor-phase contamination. Elemental mercury (Hg 0 ), dimethylmercury ((CH 3 ) 2 Hg), and methylmercury (CH 3 Hg + ) are among species known or suspected to contribute to the flux of mercury from liquid to vapor phase (Iverfeldt and Lindquist, 1982). Chemical speciation affects not only mercury behavior in LWS operations but may also affect the performance of mercury treatment and removal technologies in the LWS.
The Defense Waste Processing Facility (DWPF) is currently preparing to initiate processing of Sludge Batch 10 (SB10), which is comprised of material from Tanks 11H, 13H, 15H, 26F, 40H (heel only), and Alternate Feed Stock-2 and Sodium Reactor Experiment material from H-Canyon. Frit 473 was recommended for sludge-only (SO) and coupled processing with the Salt Waste Processing Facility (SWPF) based on previous assessments of SB10 projections with the DWPF Product Composition Control System glass property models and their associated Measurement Acceptance Region constraints. Savannah River Mission Completion (SRMC) subsequently pursued Wash Cycle Y to further reduce the total sulfur in the sludge batch and increase processing flexibility at DWPF. In October 2022, SRMC System Planning provided an updated SB10 Tank 40H blend baseline projection based on the Tank 51 confirmation sample results. Due to the reduced Na concentration relative to previous SB10 projections, two additional projections based on the addition of 7,000 gallons of caustic were provided in November 2022.
Stainless-steel clad Pu from Japan’s Fast Critical Assembly (FCA) reactor is currently being dispositioned at the Savannah River Site. The electrolytic dissolver, operated by Savannah River Nuclear Solutions in H-Canyon, is being utilized to dissolve the material. The resulting solutions are transferred to the Concentration, Storage, and Transfer Facilities, operated by Savannah River Mission Completion (SRMC), for subsequent vitrification at the Defense Waste Processing Facility (DWPF). In support of the FCA mission startup, a preliminary evaluation was conducted by the Savannah River National Laboratory to assess the impact of the FCA discards on the liquid waste system.
Solution rates of pure iron and molybdenum in liquid potassium
Previous reports that investigated the regulation of the NO/soluble guanylyl cyclase (sGC)/cGMP pathway by estrogenic compounds have focused primarily on the levels of NO, NO-producing enzymes, and cGMP in various tissues. In this study, we demonstrate that 17beta-estradiol (E2) regulates the alpha(1) and beta(1) subunits of the NO receptor, sGC, at the mRNA and protein levels in rat uterus. Using real-time quantitative PCR, we found that within 1 h of in vivo E2 administration to rats, sGC mRNA levels begin to diminish. After 3 h, there is a maximal diminution of sGC mRNA expression (sGC alpha(1) 10% and sGC beta(1) 33% of untreated). This effect was blocked by the estrogen receptor antagonist, ICI 182,780, indicating that estrogen receptor is required. The effect of E2 also was observed in vitro with incubations of uterine tissue, indicating that the response does not depend on the secondary release of other hormones or factors from other tissues. Puromycin did not block the effect, suggesting the effects occur because of preexisting factors in uterine tissues and do not require new protein synthesis. Using immunoblot analysis, we found that sGC protein levels also were reduced by E2 over a similar time course as the sGC mRNA. We conclude that sGC plays a vital role in the NO/sGC/cGMP regulatory pathway during conditions of elevated estrogen levels in the rat uterus as a result of the reduction of sGC expression.
In addition, the effective Henry's law constant and the associative enthalpy change of solvation of PNA in water are determined to be 39.95 mol kg^-1 atm^-1 and -69.84 kJ mol^-1 at 298.15K, respectively.
An extremely stable, energy-dense (53.6 Ah L –1 , 2 M transferrable electrons), low crossover (permeability of <1 × 10 –13 cm 2 s –1 using Nafion 212 (Nafion is a trademark polymer from DuPont)), and potentially inexpensive anthraquinone with 2-2-propionate ether anthraquinone structure (abbreviated 2-2PEAQ) is synthesized and extensively evaluated under practically relevant conditions for use in the negolyte of an aqueous redox flow battery. 2-2PEAQ shows a high stability with a fade rate of 0.03–0.05% per day at different applied current densities, cut-off voltage windows, and concentrations (0.1 and 1.0 M ) in both a full cell paired with a ferro/ferricyanide posolyte as well as a symmetric cell. 2-2PEAQ is further shown to have extreme long-term stability, losing only ≈0.01% per day when an electrochemical rejuvenation strategy is employed. From post-mortem analysis (nuclear magnetic resonance (NMR), liquid chromatography–mass spectrometry (LC-MS), and cyclic voltammetry (CV)) two degradation mechanisms are deduced: side chain loss and anthrone formation. 2-2PEAQ with the ether linkages attached on carbons non-adjacent to the central ring is found to have three times lower fade rate compared to its isomer with ether linkages on the carbon adjacent to the central quinone ring. Here, the present study introduces a viable negolyte candidate for grid-scale aqueous organic redox flow batteries.
Explore the source record for details and available documents.