Search NASA⌕ Search

SEARCH · Search NASA

Results for “System Process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Software Reliability Issues Concerning Large and Safety Critical Software Systems

This research was undertaken to provide NASA with a survey of state-of-the-art techniques using in industrial and academia to provide safe, reliable, and maintainable software to drive large systems. Such systems must match the complexity and strict safety requirements of NASA's shuttle system. In particular, the Launch Processing System (LPS) is being considered for replacement. The LPS is responsible for monitoring and commanding the shuttle during test, repair, and launch phases. NASA built this system in the 1970's using mostly hardware techniques to provide for increased reliability, but it did so often using custom-built equipment, which has not been able to keep up with current technologies. This report surveys the major techniques used in industry and academia to ensure reliability in large and critical computer systems.

Kamel, Khaled↗
NASA NTRS2006

Addressing the Tension Between Strong Perimeter Control an Usability

This paper describes a strong perimeter control system for a general purpose processing system, with the perimeter control system taking significant steps to address usability issues, thus mitigating the tension between strong perimeter protection and usability. A secure front end enforces two-factor authentication for all interactive access to an enclave that contains a large supercomputer and various associated systems, with each requiring their own authentication. Usability is addressed through a design in which the user has to perform two-factor authentication at the secure front end in order to gain access to the enclave, while an agent transparently performs public key authentication as needed to authenticate to specific systems within the enclave. The paper then describes a proxy system that allows users to transfer files into the enclave under script control, when the user is not present to perform two-factor authentication. This uses a pre-authorization approach based on public key technology, which is still strongly tied to both two-factor authentication and strict control over where files can be transferred on the target system. Finally the paper describes an approach to support network applications and systems such as grids or parallel file transfer protocols that require the use of many ports through the perimeter. The paper describes a least privilege approach that dynamically opens ports on a host-specific, if-authorized, as-needed, just-in-time basis.

Hinke, Thomas H.↗
NASA NTRS2006

PVM Enhancement for Beowulf Multiple-Processor Nodes

A recent version of the Parallel Virtual Machine (PVM) computer program has been enhanced to enable use of multiple processors in a single node of a Beowulf system (a cluster of personal computers that runs the Linux operating system). A previous version of PVM had been enhanced by addition of a software port, denoted BEOLIN, that enables the incorporation of a Beowulf system into a larger parallel processing system administered by PVM, as though the Beowulf system were a single computer in the larger system. BEOLIN spawns tasks on (that is, automatically assigns tasks to) individual nodes within the cluster. However, BEOLIN does not enable the use of multiple processors in a single node. The present enhancement adds support for a parameter in the PVM command line that enables the user to specify which Internet Protocol host address the code should use in communicating with other Beowulf nodes. This enhancement also provides for the case in which each node in a Beowulf system contains multiple processors. In this case, by making multiple references to a single node, the user can cause the software to spawn multiple tasks on the multiple processors in that node.

Springer, Paul↗
NASA NTRS1995

B-ISBN Onboard Processing Fast Packet Switch Developed

Future satellite communications applications will require a packet-switched onboard satellite processing system to route packets at very high speeds from uplink beams to different downlink beams. The rapid emergence of point-to-multipoint services, and the important role of satellites in a national and global information infrastructure, makes the multicast function essential to a fast packet switch (FPS). NASA Lewis Research Center's Digital System Technology Branch has been studying possible architectures for high-speed onboard-processing satellite systems. As part of this research, COMSAT Laboratories developed a broadband integrated services digital network (B-ISDN) fast packet switch for Lewis that was delivered on December 1994. The fast packet switch consists of eight inputs and eight outputs that can receive and transmit data, respectively, at a rate of 155 Mbps. The switch features multiple priorities (three) and multiple-size (three) satellite virtual cells that are similar to ATM cells in length (52 bytes). In addition, the fast packet switch features a congestion-control algorithm that allows users to set different thresholds for individual destination ports, thus throttling back the traffic from the transmitting port.

Source record↗
NASA NTRS1979

Nonterrestrial material processing and manufacturing of large space systems

Nonterrestrial processing of materials and manufacturing of large space system components from preprocessed lunar materials at a manufacturing site in space is described. Lunar materials mined and preprocessed at the lunar resource complex will be flown to the space manufacturing facility (SMF), where together with supplementary terrestrial materials, they will be final processed and fabricated into space communication systems, solar cell blankets, radio frequency generators, and electrical equipment. Satellite Power System (SPS) material requirements and lunar material availability and utilization are detailed, and the SMF processing, refining, fabricating facilities, material flow and manpower requirements are described.

Von Tiesenhausen, G.↗
NASA NTRS2001

Lessons from Adaptive Level One Accelerator (ALOA) System Implementation

The Adaptive Level One Accelerator (ALOA) system was developed as part of the Earth Science Data and Information System (ESDIS) project. The reconfigurable computing technologies were investigated for Level 1 satellite telemetry data processing to achieve computing acceleration and cost reduction for the next-generation Level 1 data processing systems. The MODIS instrument calibration algorithm was implemented using reconfigurable a computer. The system development process and the lessons learned throughout the design cycle are summarized in this paper.

Patel, Umesh D.↗
NASA NTRS1992

Optical-Input, Optical-Output Morphological Processor

Some advantages of optical and electronic processing combined. Proposed optical-input/optical-output morphological processor is optoelectronic assembly performing some binary operations on picture elements of binary input image, yielding processed binary output image. Number of such processors cascaded to form more complicated image-processing system. Use of optics as connection medium makes rate of processing faster than in all-electronic system designed to perform same overall processing functions. At the same time, use of electronics as processing medium provides flexibility of reconfiguration not available in all-optical system.

Yu, Jeffrey W.↗
NASA NTRS1972

A summary of Michigan program for earth resource information systems

A summary and guide to the development of earth resources information systems which employ multispectral remote sensing are reported. Major areas of activities center on improved throughput parallel processing systems, improved processing techniques, practical use of techniques in user applications, and improved sensors. Cost effectiveness considerations point to signature extension, parallel processing all-digital computers, and airborne multispectral imaging radar as some of the improvement technologies.

Erickson, J. D.↗
NASA NTRS1986

Potential medical applications of TAE

In cooperation with scientists in the University of Washington Medical School, a microcomputer-based image processing system for quantitative microscopy, called DMD1 (Digital Microdensitometer 1) was constructed. In order to make DMD1 transportable to different hosts and image processors, we have been investigating the possibility of rewriting the lower level portions of DMD1 software using Transportable Applications Executive (TAE) libraries and subsystems. If successful, we hope to produce a newer version of DMD1, called DMD2, running on an IBM PC/AT under the SCO XENIX System 5 operating system, using any of seven target image processors available in our laboratory. Following this implementation, copies of the system will be transferred to other laboratories with biomedical imaging applications. By integrating those applications into DMD2, we hope to eventually expand our system into a low-cost general purpose biomedical imaging workstation. This workstation will be useful not only as a self-contained instrument for clinical or research applications, but also as part of a large scale Digital Imaging Network and Picture Archiving and Communication System, (DIN/PACS). Widespread application of these TAE-based image processing and analysis systems should facilitate software exchange and scientific cooperation not only within the medical community, but between the medical and remote sensing communities as well.

Fahy, J. Ben↗
NASA NTRS1976

Process for making a multilayer interconnect system

A process for making an interconnect system for a multilayer circuit pattern. The interconnect system is formed having minimized through-hole space consumption so as to be suitable for high density, closely meshed circuit patterns.

Zachry, Clyde L.↗
NASA NTRS1987

Modeling and simulation of spacecraft power systems

EASY5 modeling of a complete spacecraft power processing system is presented. Component models are developed, and several system models including a solar array switching system, a partially-shunted solar array system and COBE system are simulated. The power system's modes of operation, such as shunt mode, battery-charge mode, and battery-discharge mode, are simulated for a complete orbit cycle.

Lee, J. R.↗
NASA NTRS1995

Reduce Fluid Experiment System: Flight data from the IML-1 Mission

Processing and data reduction of holographic images from the International Microgravity Laboratory 1 (IML-1) presents some interesting challenges in determining the effects of microgravity on crystal growth processes. Use of several processing techniques, including the Computerized Holographic Image Processing System and the Software Development Package (SDP-151) will provide fundamental information for holographic and schlieren analysis of the space flight data.

Workman, Gary L.↗
NASA NTRS2018

Solid State Air Purification System

Life support systems in spacecraft are designed to provide a safe, habitable environment for the astronauts, and one of the most significant challenges is managing acceptable air quality. Carbon dioxide (CO2) is respired normally by humans at concentrations that are toxic if inhaled directly, and as a result cabin air must be tightly managed. The Carbon Dioxide Removal Assembly (CDRA) currently on board the ISS is the best functioning technology for manned space cabins, but has two significant drawbacks:1. The CDRA requires that air be dried prior to CO2 capture, and this costs energy _ in fact, the system spends 4X more energy drying the air than in actually capturing and releasing carbon dioxide. 2. The CDRA works in batch mode, while downstream CO2 processing systems require a continuous stream of CO2. This adds unnecessary complexity, as well as a second parasitic energy loss.An ideal system would process CO2 continuously without any need for drying of the air, and without any moving parts. Such a system would require a fraction of the size and weight of the CDRA while dropping the cost of CO2 capture by 5X or more. Such a technology would be enabling for future long term manned flight missions, such as a mission to Mars. eSionic is developing a new electrochemical membrane technology using its patented innovations in electrolyte materials. In Phase I of this program eSionic has demonstrated continuous gas separation using only electricity to drive the separation, with no moving parts or pressure drops. In Phase II, eSionic will demonstrate long-term operation of the membranes consistent with the needs of NASA for this development program.

Life Support↗
NASA NTRS1987

Synthetic aperture radar signal processing on the MPP

Satellite-borne Synthetic Aperture Radars (SAR) sense areas of several thousand square kilometers in seconds and transmit phase history signal data several tens of megabits per second. The Shuttle Imaging Radar-B (SIR-B) has a variable swath of 20 to 50 km and acquired data over 100 kms along track in about 13 seconds. With the simplification of separability of the reference function, the processing still requires considerable resources; high speed I/O, large memory and fast computation. Processing systems with regular hardware take hours to process one Seasat image and about one hour for a SIR-B image. Bringing this processing time closer to acquisition times requires an end-to-end system solution. For the purpose of demonstration, software was implemented on the present Massively Parallel Processor (MPP) configuration for processing Seasat and SIR-B data. The software takes advantage of the high processing speed offered by the MPP, the large Staging Buffer, and the high speed I/O between the MPP array unit and the Staging Buffer. It was found that with unoptimized Parallel Pascal code, the processing time on the MPP for a 4096 x 4096 sample subset of signal data ranges between 18 and 30.2 seconds depending on options.

Ramapriyan, H. K.↗
NASA NTRS2004

A Low-Cost Clustered Archive Approach for Storing Remote Sensing Data

As part of NASA's Earth Observing System (EOS) Data and Information System (EOSDIS), the Moderate Resolution Imaging Spectrometer (MODIS) Data Processing System (MODAPS) is now processing data from two instruments on the EOS flag ship spacecraft Terra and Aqua. Between the two, MODAPS is generating over 1 Terrabyte of data per day and has surpassed 3 Petabytes of total data. The bulk of the data is stored near-line in StorageTek Powerhorn tape jukeboxes. Accessing data that has been moved to tape involves submitting an order, scheduling the tape, and waiting for the data to become available. I am developing a low cost clustered archive that could enable storing a very large amount of data such as the MODIS data described above in an organized fashion on a cluster of commodity hardware using low cost SATA hard drives such that the files are directly available online. The system takes full advantage of Open Source software, using the GNULinux operating system, PostgreSQL relational database and the Apache HTTP Server. This poster session will depict my approach, the interface to the archive, a brief discussion of the internals of the system and some performance numbers from my prototyping. I will also describe various costs and benefits of this approach versus the traditional large tape jukebox approach currently in use in the EOSDIS.

Tilmes, Curt↗
NASA NTRS1978

Ku-band signal design study

Analytical tools, methods and techniques for assessing the design and performance of the space shuttle orbiter data processing system (DPS) are provided. The computer data processing network is evaluated in the key areas of queueing behavior synchronization and network reliability. The structure of the data processing network is described as well as the system operation principles and the network configuration. The characteristics of the computer systems are indicated. System reliability measures are defined and studied. System and network invulnerability measures are computed. Communication path and network failure analysis techniques are included.

Rubin, I.↗