Search NASA⌕ Search

SEARCH · Search NASA

Results for “System of nonlinear equations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

Nonlinear Behavior of a Typical Airfoil Section with Control Surface Freeplay: A Numerical and Experimental Study

A three degree-of-freedom aeroelastic typical section with control surface freeplay is modeled theoretically as a system of piecewise linear state-space models. The system response is determined by time marching of the governing equations using a standard Runge-Kutta algorithm in conjunction with Henon's method for integrating a system of equations to a prescribed surface of phase space section. Henon's method is used to locate the "switching points" accurately and efficiently as the system moves from one linear region into another. An experimental model which closely approximates the three degree-of-freedom, typical section in two-dimensional, incompressible flow has been created to validate the theoretical model. Consideration is given to modeling realistically the structural damping present in the experimental system. The effect of the freeplay on the system response is examined numerically and experimentally. The development of the state-space model offers a low-order, computationally efficient means of modeling fully the freeplay nonlinearity and may offer advantages in future research which will investigate the effects of freeplay on the control of flutter in the typical section.

Conner, M. D.↗
NASA NTRS1974

Modern control concepts in hydrology

Two approaches to an identification problem in hydrology are presented based upon concepts from modern control and estimation theory. The first approach treats the identification of unknown parameters in a hydrologic system subject to noisy inputs as an adaptive linear stochastic control problem; the second approach alters the model equation to account for the random part in the inputs, and then uses a nonlinear estimation scheme to estimate the unknown parameters. Both approaches use state-space concepts. The identification schemes are sequential and adaptive and can handle either time invariant or time dependent parameters. They are used to identify parameters in the Prasad model of rainfall-runoff. The results obtained are encouraging and conform with results from two previous studies; the first using numerical integration of the model equation along with a trial-and-error procedure, and the second, by using a quasi-linearization technique. The proposed approaches offer a systematic way of analyzing the rainfall-runoff process when the input data are imbedded in noise.

Duong, N.↗
NASA NTRS1975

Modern control concepts in hydrology

Two approaches to an identification problem in hydrology are presented, based upon concepts from modern control and estimation theory. The first approach treats the identification of unknown parameters in a hydrologic system subject to noisy inputs as an adaptive linear stochastic control problem; the second approach alters the model equation to account for the random part in the inputs, and then uses a nonlinear estimation scheme to estimate the unknown parameters. Both approaches use state-space concepts. The identification schemes are sequential and adaptive and can handle either time-invariant or time-dependent parameters. They are used to identify parameters in the Prasad model of rainfall-runoff. The results obtained are encouraging and confirm the results from two previous studies; the first using numerical integration of the model equation along with a trial-and-error procedure, and the second using a quasi-linearization technique. The proposed approaches offer a systematic way of analyzing the rainfall-runoff process when the input data are imbedded in noise.

Duong, N.↗
NASA NTRS1976

Extended Lyapunov stability criterion using a nonlinear algebraic relation with application to adaptive control

A new nonlinear stability criterion is developed by use of a class of Lyapunov functionals for model-reference adaptive systems (MRAS). Results are compared with traditional results, and a comparative design technique is used to illustrate its function in improving the transient response of an MRAS controller. For a particular system structure and class of input signals, the new stability criterion is shown to include traditional sufficiency stability conditions as a special case. An example is cited to illustrate the use of the nonlinear criterion and its definite advantages in helping improve the adaptive error transient response of a system. Analysis of results is effected by use of a linearization technique on the resulting adaptive equations.

Colburn, B. K.↗
NASA NTRS1976

High angle-of-attack stability-and-control analysis

Methods of linear systems analysis were applied to mathematical models of aircraft flying at high angle of attack and maneuver rate. First order longitudinal and lateral directional coupling is obtained by linearizing the complete nonlinear equations of motion about a generalized (quasi steady) trim point. Open loop stability boundaries are defined using the linear dynamic equations, and pilot in the loop effects are presented. Stability augmentation structures for maneuvering flight conditions are shown to be defined readily using optimal control theory.

Stengel, R. F.↗
NASA NTRS1977

The dynamics and optimal control of spinning spacecraft and movable telescoping appendages, part B: Effect of gravity-gradient torques on the dynamics of a spinning spacecraft with telescoping appendages

The effects of gravity gradient torques during boom deployment maneuvers of a spinning spacecraft are examined. Configurations where the booms extended only along the hub principal axes and where one or two booms are offset from the principal axes were considered. For the special case of symmetric deployment (principal axes booms) the stability boundaries are determined, and a stability chart is used to study the system behavior. Possible cases of instability during this type of maneuver are identified. In the second configuration an expression for gravity torque about the hub center of mass was developed. The nonlinear equations of motion are solved numerically, and the substantial influence of the gravity torque during asymmetric deployment maneuvers is indicated.

Bainum, P. M.↗
NASA NTRS1988

Dynamic inflow for practical applications

A derivation is presented which gives both the nonlinear dynamic inflow model and the perturbation dynamic inflow model in a general coordinate system. The perturbation model includes perturbations in hub motions, in skew angle, and in yaw angle. The governing equations may be switched to their dimensional forms prior to application.

Peters, David A.↗
NASA NTRS1988

A novel approach to the modelling and control of flexible robot arms

A general dynamic model of a two-link Euler-Bernoulli beam flexible robot arm is presented in the form of partial-differential-integral equations. Observations are made on important properties of the dynamic model. The resulting infinite-dimensional system is then input-output decoupled and partially linearized by a diffeomorphic state transformation and nonlinear state feedback. The local stability issue is addressed for a one-link flexible robot arm.

Ding, Xuru↗
NASA NTRS2023

Breaking Wave Field Statistics With A Multi-Layer Model

The statistics of breaking wave fields are characterised within a novel multi-layer framework, which generalises the single-layer Saint-Venant system into a multi-layer and non-hydrostatic formulation of the Navier–Stokes equations. We simulate an ensemble of phase-resolved surface wave fields in physical space, where strong nonlinearities, including directional wave breaking and the subsequent highly rotational flow motion, are modelled, without surface overturning. We extract the kinematics of wave breaking by identifying breaking fronts and their speed, for freely evolving wave fields initialised with typical wind wave spectra. The Λ(c) distribution, defined as the length of breaking fronts (per unit area) moving with speed c to c + dc following Phillips (J. Fluid Mech., vol. 156, 1985, pp. 505–531), is reported for a broad range of conditions. We recover the Λ(c) ∝ c−6 scaling without wind forcing for sufficiently steep wave fields. A scaling of Λ(c) based solely on the root-mean-square slope and peak wave phase speed is shown to describe the modelled breaking distributions well. The modelled breaking distributions are in good agreement with field measurements and the proposed scaling can be applied successfully to the observational data sets. The present work paves the way for simulations of the turbulent upper ocean directly coupled to a realistic breaking wave dynamics, including Langmuir turbulence, and other sub-mesoscale processes.

Jiarong Wu↗
NASA NTRS2012

Quasi 1D Modeling of Mixed Compression Supersonic Inlets

The AeroServoElasticity task under the NASA Supersonics Project is developing dynamic models of the propulsion system and the vehicle in order to conduct research for integrated vehicle dynamic performance. As part of this effort, a nonlinear quasi 1-dimensional model of the 2-dimensional bifurcated mixed compression supersonic inlet is being developed. The model utilizes computational fluid dynamics for both the supersonic and subsonic diffusers. The oblique shocks are modeled utilizing compressible flow equations. This model also implements variable geometry required to control the normal shock position. The model is flexible and can also be utilized to simulate other mixed compression supersonic inlet designs. The model was validated both in time and in the frequency domain against the legacy LArge Perturbation INlet code, which has been previously verified using test data. This legacy code written in FORTRAN is quite extensive and complex in terms of the amount of software and number of subroutines. Further, the legacy code is not suitable for closed loop feedback controls design, and the simulation environment is not amenable to systems integration. Therefore, a solution is to develop an innovative, more simplified, mixed compression inlet model with the same steady state and dynamic performance as the legacy code that also can be used for controls design. The new nonlinear dynamic model is implemented in MATLAB Simulink. This environment allows easier development of linear models for controls design for shock positioning. The new model is also well suited for integration with a propulsion system model to study inlet/propulsion system performance, and integration with an aero-servo-elastic system model to study integrated vehicle ride quality, vehicle stability, and efficiency.

Kopasakis, George↗
NASA NTRS1988

Input-output-controlled nonlinear equation solvers

To upgrade the efficiency and stability of the successive substitution (SS) and Newton-Raphson (NR) schemes, the concept of input-output-controlled solvers (IOCS) is introduced. By employing the formal properties of the constrained version of the SS and NR schemes, the IOCS algorithm can handle indefiniteness of the system Jacobian, can maintain iterate monotonicity, and provide for separate control of load incrementation and iterate excursions, as well as having other features. To illustrate the algorithmic properties, the results for several benchmark examples are presented. These define the associated numerical efficiency and stability of the IOCS.

Padovan, Joseph↗
NASA NTRS1982

An approximation theory for nonlinear partial differential equations with applications to identification and control

Approximation results from linear semigroup theory are used to develop a general framework for convergence of approximation schemes in parameter estimation and optimal control problems for nonlinear partial differential equations. These ideas are used to establish theoretical convergence results for parameter identification using modal (eigenfunction) approximation techniques. Results from numerical investigations of these schemes for both hyperbolic and parabolic systems are given.

Banks, H. T.↗
NASA NTRS1990

Modeling of flow systems for implementation under KATE

The modeling of flow systems is a task currently being investigated at Kennedy Space Center in parallel with the development of the KATE artificial intelligence system used for monitoring diagnosis and control. Various aspects of the modeling issues are focussed on with particular emphasis on a water system scheduled for demonstration within the KATE environment in September of this year. LISP procedures were written to solve the continuity equations for three internal pressure nodes using Newton's method for simultaneous nonlinear equations.

Whitlow, Jonathan E.↗
NASA NTRS1993

The influence of orography on the transport of atmospheric constituents

Given the fact that martian orography varies over a range of two scale heights (cf., about one scale height on Earth), it is thought that on Mars some aspects of the circulation should be affected to a large degree by the presence of orography. Initial results from two numerical models are presented that illustrate the effect of orography on cross-equatorial transport on Mars. On Earth, western boundary currents are found not only in the oceans as one would expect, but also in the troposphere, the most notable example being the East African Jet, which has an important effect on the monsoon circulation of the Eastern Indian Ocean. Two models were used for this investigation: a simple GCM (hereafter referred to as the SGCM); and a simple one-level barotropic model (BM). The SGCM solves the hydrostatic primitive equations on a sphere by representing model variables by spherical harmonics in the horizontal, with nonlinear terms being calculated in grid-point space. In the vertical, the model uses the sigma coordinate system in finite-difference form. The model represents the radiative processes in the atmosphere by a Newtonian relaxation to a specified zonal mean temperature state and surface drag by Rayleigh friction in the lowest model level.

Joshi, Manoj M.↗
NASA NTRS2000

Application of a Reduced Order Kalman Filter to Initialize a Coupled Atmosphere-Ocean Model: Impact on the Prediction of El Nino

A reduced order Kalman Filter, based on a simplification of the Singular Evolutive Extended Kalman (SEEK) filter equations, is used to assimilate observed fields of the surface wind stress, sea surface temperature and sea level into the nonlinear coupled ocean-atmosphere model. The SEEK filter projects the Kalman Filter equations onto a subspace defined by the eigenvalue decomposition of the error forecast matrix, allowing its application to high dimensional systems. The Zebiak and Cane model couples a linear reduced gravity ocean model with a single vertical mode atmospheric model of Zebiak. The compatibility between the simplified physics of the model and each observed variable is studied separately and together. The results show the ability of the model to represent the simultaneous value of the wind stress, SST and sea level, when the fields are limited to the latitude band 10 deg S - 10 deg N. In this first application of the Kalman Filter to a coupled ocean-atmosphere prediction model, the sea level fields are assimilated in terms of the Kelvin and Rossby modes of the thermocline depth anomaly. An estimation of the error of these modes is derived from the projection of an estimation of the sea level error over such modes. This method gives a value of 12 for the error of the Kelvin amplitude, and 6 m of error for the Rossby component of the thermocline depth. The ability of the method to reconstruct the state of the equatorial Pacific and predict its time evolution is demonstrated. The method is shown to be quite robust for predictions I up to six months, and able to predict the onset of the 1997 warm event fifteen months before its occurrence.

Ballabrera-Poy, Joaquim↗
NASA NTRS2002

System IDentification Programs for AirCraft (SIDPAC)

A collection of computer programs for aircraft system identification is described and demonstrated. The programs, collectively called System IDentification Programs for AirCraft, or SIDPAC, were developed in MATLAB as m-file functions. SIDPAC has been used successfully at NASA Langley Research Center with data from many different flight test programs and wind tunnel experiments. SIDPAC includes routines for experiment design, data conditioning, data compatibility analysis, model structure determination, equation-error and output-error parameter estimation in both the time and frequency domains, real-time and recursive parameter estimation, low order equivalent system identification, estimated parameter error calculation, linear and nonlinear simulation, plotting, and 3-D visualization. An overview of SIDPAC capabilities is provided, along with a demonstration of the use of SIDPAC with real flight test data from the NASA Glenn Twin Otter aircraft. The SIDPAC software is available without charge to U.S. citizens by request to the author, contingent on the requestor completing a NASA software usage agreement.

Morelli, Eugene A.↗
NASA NTRS1982

Normal modes of a compound drop

The modes are characterized by their frequency, the attendant displacement of fluid boundaries, and the flow pressure fields within the fluids. The drops consist of three fluids; a core fluid, a fluid shell surrounding the core, and a host fluid surrounding the shell. These fluids are assumed to be inviscid and incompressible, and the core and the shell to be concentric. The theory is obtained by linearization of the equations of fluid motion to the lowest order of nonlinearity that yields the normal modes. Numerical values of mode frequencies and the associated relative displacements of the fluid boundaries are presented for several specific systems, and the results compared with observations.

Saffren, M.↗
NASA NTRS1981

Bifurcation and post-buckling analysis of laminated composite plates via reduced basis technique

A reduced basis technique and a problem-adaptive computational algorithm are presented for the bifurcation and post-buckling analysis of laminated anisotropic plates. The computational algorithm can be conveniently divided into three distinct stages. The first stage is that of determining the bifurcation point. The plate is discretized by using displacement finite element (or finite difference) models. The special symmetries exhibited by the response of the anisotropic plate are used to reduce the size of the analysis region. The vector of unknown nodal parameters is expressed as a linear combination of a small number of basis vectors, and a Rayleigh-Ritz technique is used to approximate the finite element equations by a small system of algebraic equations. The reduced equations are used to determine the bifurcation point and the associated eigenmode of the panel. In the second stage of the bifurcation buckling mode is used to obtain a nonlinear solution in the vicinity of the bifurcation point and new (updated) sets of basis vectors and reduced equations are generated. In the third stage the reduced equations are used to trace the post-buckling paths. The effectiveness of the proposed technique for predicting the bifurcation and post-buckling behavior of plates is demonstrated by means of numerical examples for plates loaded by means of prescribed edge displacements.

Noor, A. K.↗