Search NASA⌕ Search

SEARCH · Search NASA

Results for “THERMIONICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Commissioning of the Low Energy Electron Gun Test Stand at the University of Chicago

We built a test stand for evaluating the performance of the thermionic electron sources for the electron lens project at the Integrable Optics Test Accelerator (IOTA) in Fermilab. The lens will be used to study nonlinear dynamics and electron cooling of 2.5 MeV protons with strong space charge. The test stand will validate the characteristics of the thermionic sources and the main parameters of the generated beams. In this paper we present the results of the commissioning of the UChicago test stand and validation of the hollow beam source.

43 PARTICLE ACCELERATORS↗

Characterizations of 2-(pyranoquinolin-4-yl) malononitrile/p-silicon heterojunction

Thin film of 2-(pyranoquinolin-4-yl) malononitrile, PQM, was deposited on p-Si to fabricate a heterojunction of PQM/Si. Current–voltage characteristics for PQM/p-Si were investigated as a function of temperature. The diode ideality factor was calculated at different temperatures. The mechanisms for current transport in forward and reverse bias were deduced. At low voltage, the thermionic emission is the predominant mechanism of charge transport in PQM/p-Si. While ohmic conduction was observed at the higher voltage in PQM/p-Si. The photovoltaic performance for PQM/p-Si under illumination was studied and the parameters of short circuit photocurrent I{sub SC}, open-circuit photovoltage V{sub oc} and fill factor FF were calculated.

36 MATERIALS SCIENCE↗

Regularities of Plasma-Immersion Formation of Long-Pulse High-Intensity Titanium Ion Beams

The results of experimental investigations on plasma-immersion formation of ballistically focused beams of low-energy titanium ions with the pulse duration up to 30 μs are presented. The processes of neutralization of the space charge of high-intensity beams upon increasing the ion-current density by a few orders of magnitude during their focusing are addressed. The conditions of preliminary injection of the metal plasma, its parameters, the formation of the beam plasma during residual-gas ionization and secondary and thermionic emissions are shown to be of critical importance for an effective transport of these beams in the equi-potential drift space. It is demonstrated that the use of a disc electrode, preventing the macroparticles from penetrating the region of the ballistic beam focusing, increases the efficiency of long-pulse titanium ion beam transport and simultaneously reduces the probability of instability development.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Photoionization from the 5p {sup 2}P{sub 3/2} state of rubidium

We report two-step photoionization studies from the 5p {sup 2}P{sub 3/2} excited state of rubidium using two dye lasers simultaneously pumped by a common Nd:YAG laser in conjunction with a thermionic diode ion detector. The photoionization cross section at the first ionization threshold is measured as 18.8 {+-} 3 Mb and at excess energies of 0.013, 0.106, 0.229, and 0.329 eV is measured as 15, 13.6, 12.6, and 12.5 Mb, respectively. The measured value of the photoionization cross section at the threshold is used to calibrate the oscillator strengths of the 5p {sup 2}P{sub 3/2}{yields}nd {sup 2}D{sub 5/2} (22 {<=}n{<=} 52) Rydberg transitions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photovoltage and photocurrent in Pd–oxide–InP structures in a hydrogen medium

Pd–oxide–InP (MOS) structures are fabricated, and their physical and photoelectric properties in a hydrogen atmosphere are investigated. It is established that a decrease in photovoltage of the structure and a large increase in photocurrent in the circuit are observed under the pulsed effect of hydrogen on the structure with a palladium layer illuminated by a light-emitting diode (LED of the wavelength λ = 0.9 μm). The kinetics and mechanism of the variation in the photovoltage and photocurrent are considered. It is assumed that the photovoltage decreases because of the ionization of hydrogen atoms in the Pd layer, and the photocurrent increases due to the thermionic emission of nonequilibrium electrons from the Pd layer into the semiconductor. On the basis of results of the investigations, the sensitive element for an optoelectronic hydrogen sensor is developed.

36 MATERIALS SCIENCE↗

Discovery of Stable Surfaces with Extreme Work Functions by High‐Throughput Density Functional Theory and Machine Learning

Abstract The work function is the key surface property that determines the energy required to extract an electron from the surface of a material. This property is crucial for thermionic energy conversion, band alignment in heterostructures, and electron emission devices. This work presents a high‐throughput workflow using density functional theory (DFT) to calculate the work function and cleavage energy of 33,631 slabs (58,332 work functions) that are created from 3,716 bulk materials. The number of calculated surface properties surpasses the previously largest database by a factor of ≈27. Several surfaces with an ultra‐low (<2 eV) and ultra‐high (>7 eV) work function are identified. Specifically, the (100)‐Ba‐O surface of BaMoO 3 and the (001)‐F surface of Ag 2 F have record‐low (1.25 eV) and record‐high (9.06 eV) steady‐state work functions. Based on this database a physics‐based approach to featurize surfaces is utilized to predict the work function. The random forest model achieves a test mean absolute error (MAE) of 0.09 eV, comparable to the accuracy of DFT. This surrogate model enables rapid predictions of the work function (≈ 10 5 faster than DFT) across a vast chemical space and facilitates the discovery of material surfaces with extreme work functions for energy conversion and electronic device applications.

97 MATHEMATICS AND COMPUTING↗

Extreme Carrier Depletion and Superlinear Photoconductivity in Ultrathin Parallel-Aligned ZnO Nanowire Array Photodetectors Fabricated by Infiltration Synthesis

Ultrathin semiconductor nanowires enable high-performance chemical sensors and photodetectors, but their synthesis and device integration by standard complementary metal-oxide-semiconductor (CMOS)-compatible processes remain persistent challenges. This work demonstrates fully CMOS-compatible synthesis and integration of parallel-aligned polycrystalline ZnO nanowire arrays into ultraviolet photodetectors via infiltration synthesis, material hybridization technique derived from atomic layer deposition. The nanowire photodetector features unique, high device performances originating from extreme charge carrier depletion, achieving photoconductive on–off ratios of >6 decades, blindness to visible light, and ultralow dark currents as low as 1 fA, the lowest reported for nanostructure-based photoconductive photodetectors. Surprisingly, the low dark current is invariant with increasing number of nanowires and the photodetector shows unusual superlinear photoconductivity, observed for the first time in nanowires, leading to increasing detector responsivity and other parameters for higher incident light powers. Temperature-dependent carrier concentration and mobility reveal the photoelectrochemical-thermionic emission process at grain boundaries, responsible for the observed unique photodetector performances and superlinear photoconductivity. Here, the results elucidate fundamental processes responsible for photogain in polycrystalline nanostructures, providing useful guidelines for developing nanostructure-based detectors and sensors. Lastly, the developed fully CMOS-compatible nanowire synthesis and device fabrication methods also have potentials for scalable integration of nanowire sensor devices and circuitries.

36 MATERIALS SCIENCE↗

Nano-crystalline p-ZnGa{sub 2}Te{sub 4}/n-Si as a new heterojunction diode

Graphical abstract: Display Omitted Highlights: ► ZnGa{sub 2}Te{sub 4}/Si thin film was prepared by thermal evaporation technique. ► XRD and AFM graphs support the nano-crystalline of the studied device. ► Dark current–voltage characteristics of the heterojunction diode were investigated. ► Electrical parameters and conduction mechanism were determined. ► Conduction mechanisms were controlled by TE, SCLC and TCLC. -- Abstract: In this communication, ZnGa{sub 2}Te{sub 4} thin film was prepared by thermal evaporation technique on n-Si substrate. P-ZnGa{sub 2}Te{sub 4}/n-Si heterojunction diode was fabricated. The structure of ZnGa{sub 2}Te{sub 4} thin film was checked by XRD pattern and confirmed by AFM micrographs. The dark current–voltage characteristics of the heterojunction diode were investigated to determine the electrical parameters and conduction mechanism as a function of forward and reverse biasing conditions in the range (−10 V to 10 V) at temperature interval (303–423 K). The conduction mechanism was controlled by thermionic emission, space charge limited (SCLC) and trap-charge limited current (TCLC) mechanisms. The basic parameters such as the series resistance R{sub s}, the shunt resistance R{sub sh}, the ideality factor n and the barrier height φ{sub b} of the diode, the total density of trap states N{sub 0} and the exponential trapping distribution P{sub o} were determined. The obtained results showed that ZnGa{sub 2}Te{sub 4} is a good candidate for the applications of electronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Preparation of W–Sc{sub 2}O{sub 3} targets and scandate cathodes with film prepared by pulsed laser deposition

Graphical abstract: - Highlights: • W–Sc{sub 2}O{sub 3} film containing 5% Sc{sub 2}O{sub 3} and 95% W were prepared by pulsed laser deposition. • W–Sc{sub 2}O{sub 3} film on scandate cathode surface improves emission property. • The film improves Sc distribution uniformity and is favorable for forming Ba–Sc–O layer. - Abstract: Sub-micrometer Sc{sub 2}O{sub 3}–W powder with a narrow particle size distribution has been obtained by a sol–gel method combined with two-step hydrogen reduction process. Based on the obtained powder, the W–Sc{sub 2}O{sub 3} targets have been sintered via spark plasma sintering (SPS) at 1300 °C. The W–Sc{sub 2}O{sub 3} targets have the average grain size of about 1 μm. Both the sintering temperature and holding time are much lower than those of the targets prepared with micrometer sized powders. The obtained W–Sc{sub 2}O{sub 3} targets have a high comparative density of 96.4% and rockwell hardness of 86.4 HRC. Using the target, the scandate cathode deposited with a film containing 5% Sc{sub 2}O{sub 3} and 95% W has been obtained by pulsed laser deposition (PLD) method. This cathode has good emission property, i.e., the highest thermionic emission current density reaches 43.09 A/cm{sup 2} of J{sub div} at 900 °C{sub b} after being activated for 8 h, which is much higher than that of scandate cathode without film. Scandium (Sc) supplied by the film on the surface during the activation forms a Ba–Sc–O active layer, which helps to the emission.

36 MATERIALS SCIENCE↗

Analysis of interfaces in Bornite (Cu5FeS4) fabricated Schottky diode using impedance spectroscopy method and its photosensitive behavior

Highlights: • Impedance spectroscopy study and current-voltage analysis of Bornite fabricated Schottky diode. • Analysis of interface regions of Schottky barrier diode under dc bias voltage. • Deduction of photosensing parameters for Al/Cu{sub 5}FeS{sub 4}/FTO Schottky diode. • Discussion of charge transport mechanism by employing space charge limited current (SCLC) theory. - Abstract: In this report, we have synthesized Bornite (Cu{sub 5}FeS{sub 4}) material by hydrothermal synthesis technique. The interface characteristics of Al/Cu{sub 5}FeS{sub 4}/FTO Schottky barrier diode (SBD) are investigated by using ac impedance spectroscopy (IS) analysis (under dark condition) and dc current-voltage (I–V) measurements (under dark and light both condition). IS is a powerful tool to identify the interface regions of SBDs. Ac impedance spectra of Al/Cu{sub 5}FeS{sub 4} SBD are recorded in the frequency range 40 Hz-20 MHz during dc bias scanning from -0.6 V to 0.6 V under dark condition. The diode parameter including ideality factor and barrier height is calculated from the conventional I–V measurement based on thermionic emission (TE) theory. Space charge limited current (SCLC) theory has been employed to further exemplify the improved performance of Cu{sub 5}FeS{sub 4} based SBD, which points out that the carrier mobility is enhanced ∼2-fold after irradiation of light.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spectroscopic interpretation and velocimetry analysis of fluctuations in a cylindrical plasma recorded by a fast camera

Fast visible imaging is used on a cylindrical magnetized argon plasma produced by thermionic discharge in the Mirabelle device. To link the information collected with the camera to a physical quantity, fast camera movies of plasma structures are compared to Langmuir probe measurements. High correlation is found between light fluctuations and plasma density fluctuations. Contributions from neutral argon and ionized argon to the overall light intensity are separated by using interference filters and a light intensifier. Light emitting transitions are shown to involve a metastable neutral argon state that can be excited by thermal plasma electrons, thus explaining the good correlation between light and density fluctuations. The propagation velocity of plasma structures is calculated by adapting velocimetry methods to the fast camera movies. The resulting estimates of instantaneous propagation velocity are in agreement with former experiments. The computation of mean velocities is discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Fluctuation of charge on dust particles in a complex plasma

This paper presents an analytical model for the evaluation of the fluctuation of the charge on the dust particles in a complex plasma. In contrast to earlier analyses, which ignored the effect of dust particles on density and temperature of electrons and ions, the present model takes into account the number and energy balance of electrons and ions. Three cases, viz., (i) no emission, (ii) thermionic emission, and (iii) photoelectric emission of electrons from the dust particles, have been considered. The results have been graphically illustrated for typical parameters. It is seen that the plasma parameters, and hence the fluctuations, are considerably affected by the consideration of number and energy balance of electrons and ions. A comparison of the results of the present analysis with those of earlier works has also been made.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Space charge limited electron emission from a Cu surface under ultrashort pulsed laser irradiation

In this theoretical study, the electron emission from a copper surface under ultrashort pulsed laser irradiation is investigated using a one dimensional particle in cell model. Thermionic emission as well as multi-photon photoelectron emission were taken into account. The emitted electrons create a negative space charge above the target, consequently the generated electric field reduces the electron emission by several orders of magnitude. The simulations indicate that the space charge effect should be considered when investigating electron emission related phenomena in materials under ultrashort pulsed laser irradiation of metals.the word ''abstract,'' but do replace the rest of this text.

74 ATOMIC AND MOLECULAR PHYSICS↗

Beam Measurement of 11.424 GHz X-Band Linac for Compton Scattering X-ray Source

An inverse Compton scattering X-ray source for medical applications, consisting of an X-band (11.424 GHz) linac and Q-switched Nd:YAG laser, is currently being developed at the University of Tokyo. This system uses an X-band 3.5-cell thermionic cathode RF gun for electron beam generation. We can obtain a multi-bunch electron beam with this gun. The beam is accelerated to 30 MeV by a traveling-wave accelerating tube. So far, we have verified stable beam generation (around 2.3 MeV) by using the newly designed RF gun and we have succeeded in beam transportation to a beam dump.

43 PARTICLE ACCELERATORS↗

Analysis of leakage current mechanisms in Pt/Au Schottky contact on Ga-polarity GaN by Frenkel-Poole emission and deep level studies

We report the Frenkel-Poole emission in Pt/Au Schottky contact on Ga-polarity GaN grown by molecular beam epitaxy using current-voltage-temperature (I-V-T) characteristics in the temperature ranging from 200 K to 375 K. Using thermionic emission model, the estimated Schottky barrier height is 0.49 eV at 200 K and 0.83 eV at 375 K, respectively, and it is observed that the barrier height increases with increase in temperature. The extracted emission barrier height ({phi}{sub t}) for Ga-polarity GaN Schottky diode by Frenkel-Poole theory is about 0.15 eV. Deep level transient spectroscopy study shows a deep level with activation energy of 0.44 eV, having capture cross-section 6.09 x 10{sup -14} cm{sup 2}, which is located between the metal and semiconductor interface, and trap nature is most probably associated with dislocations in Ga-polarity GaN. The analysis of I-V-T characteristics represents that the leakage current is due to effects of electrical field and temperature on the emission of electron from a trap state near the metal-semiconductor interface into continuum states associated with conductive dislocations in Ga-polarity GaN Schottky diode.

36 MATERIALS SCIENCE↗

Simulations of ionization in a hot cavity surface ion source

A new numerical Monte Carlo method based model of a hot cavity surface ionization ion source is presented in this paper. The model, intended to support the studies on ionization phenomena in a widely used class of ion sources, takes into account geometry of the ion source and extraction system, ionizer temperature and other features. The results of ion source efficiency calculations for various configurations of the extraction field are reviewed. The dominant role of the ionizer region near the extraction opening is described. Simulated dependences of ionization efficiency on the working parameters like ionizer length and temperature, ionization potential of the substance, and extraction voltage are discussed. A good agreement of the experimental data (e.g., influence of ionizer temperature, current-voltage curve) and the predictions of the model is found. It is also shown that the contribution to the ionization yield from impact of thermionic electrons accelerated by the extraction field may be significant, especially for the substances of small surface ionization coefficient. The simulation results are compared to the predictions of different theoretical models of the ion source--the obtained simulation data are in accordance both with a well-known Kirchner formula and the so called spherical ionizer model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Pure electron plasmas confined for 90 ms in a stellarator without electron sources or internal objects

We report on the creation and up to 90 ms sustainment of pure electron plasmas confined in a stellarator without internal objects. Injection of positrons into such plasmas is expected to lead to the creation of the first electron-positron plasma experiments. These newly created plasmas will also allow a study of pure electron plasmas without the perturbing presence of internal objects. The plasmas were created by thermionic emission of electrons from a heated, biased filament that was retracted in 20 ms. The confinement of these transient plasmas is different from that of steady state plasmas with internal objects and emissive filaments, and is generally shorter, limited by ion buildup. The decay time is increased by lowering the neutral pressure, lowering the electron plasma temperature, or operating with neutrals with high ionization energies (helium). These findings are all consistent with ion accumulation being the cause for the shorter than expected confinement times. The magnetic field strength also moderately increases the decay times. The deleterious effect of ions is not expected to imply a similar deleterious effect when introducing positrons, but it implies that ion accumulation must be avoided also in an electron-positron experiment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗