Search NASA⌕ Search

SEARCH · Search NASA

Results for “Temperature estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Study of Stark broadening of krypton helium-$\beta$ lines and estimation of electron density and temperature in NIF compressed capsules

Here the National Ignition Facility (NIF) diagnostic instrument manipulator (DIM) - based high resolution (dHIRES) x-ray spectrometer was used to measure the time evolution of the electron density (n e ) and temperature (T e ) in the hot spot of four NIF compressed capsules with 25 ps time resolution during the 'stagnation' phase. The electron density was inferred by comparing the measured Stark broadening of the krypton (Kr) Heβ spectral complex with theoretical calculations that include ion dynamic effects, and the electron temperature was inferred by comparing the measured ratio of the intensity of a dielectronically excited Li-like Kr line to the intensity of the Kr Heβ resonance line with calculations using the spectroscopic collisional radiative atomic model (SCRAM) and CRETIN collisional-radiative models. The inferred, time averaged n e values mainly agree with n e values from neutron diagnostics within uncertainties, but the neutron time-of-flight values of T ion are consistently higher than dHIRES T e values by 200–700 eV. The dHIRES measurements and measurement techniques, method of uncertainty analysis, and discussion of comparisons with measurements from neutron diagnostics are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Pulsed anodic arc discharge for the synthesis of carbon nanomaterials

Pulsed arc discharges can improve arc control and tailor the ablation process in the production of 1D and 2D nanostructures from carbon anodes. In this work, low-dimensional carbon nanoparticles have been generated by means of anodic arc discharge in helium atmosphere excited with a square-wave modulated signal (1–5 Hz, 10% duty cycle). The discharges were performed between two graphite electrodes with maximal peak current of 250 A and maximal voltage of 65 V. The erosion rates and conversion efficiency of the ablated anode are compared to reference samples grown in DC steady arc mode. Ablation rates in pulsed arcs are typically of the order of 1 mg/s. Combination of fast Langmuir probe diagnostics and optical emission spectroscopy provided plasma parameters of the discharges at the arc column. Ranges of 10 16 –10 17 m -3 for electron density and 0.5–2.0 eV for electron temperature are estimated. The obtained samples were characterized with Raman spectroscopy and scanning electron microscopy. The deposit on the cathode after pulsed arc consisted of carbon nanostructures such as graphene nano-platelets and carbon nanotubes. Erosion dynamics of pulsed arc discharge has been described in terms of a global model and compared to steady arc discharge. A correlation is identified among discharge regimes, optical emission patterns and ablation modes. In conclusion, pulsed anodic arc discharge is a very efficient source of carbon nanomaterials. The large control of the discharge characteristics will permit to tailor accurately the production and the properties of carbon nanotubes and graphene. Here, this deposition method is promising for the fabrication of semiconducting nanomaterials with tuneable electrical and optical properties.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Aspects of wave turbulence in preheating

In this work we have studied the nonlinear preheating dynamics of several inflationary models. It is well established that after a linear stage of preheating characterized by the parametric resonance, the nonlinear dynamics becomes relevant driving the system towards turbulence. Wave turbulence is the appropriated description of this phase since the matter contents are fields instead of usual fluids. Turbulence develops due to the nonlinear interations of waves, here represented by the small inhomogeneities of the scalar fields. We present relevant aspects of wave turbulence such as the Kolmogorov-Zakharov spectrum in frequency and wave number that indicates the energy transfer through scales. From the power spectrum of the matter energy density we were able to estimate the temperature of the thermalized system.

79 ASTRONOMY AND ASTROPHYSICS↗

Observation of non-thermal electron formation during the thermal quench of shattered pellet injection shutdowns in DIII-D

Formation of non-thermal (hot) electrons is studied during the thermal quench of shattered pellet injection (SPI) discharge shutdowns in the DIII-D tokamak. Both pure neon and mixed neon/deuterium shutdowns are studied. High-energy radiation (SXR and EUV) brightness levels show indications of non-thermal electron formation during the TQ. The non-thermal densities are of order 10 18 m –3 and non-thermal temperatures are estimated to be of order 10 keV. The non-thermal electrons appear to be mostly lost during the subsequent current quench, as no signal of relativistic runaway electrons is typically seen at the end of the current quench. In conclusion, the non-thermals appear to have an effect on the deposition profile of the SPI pellets, especially at the end of the TQ, due to increased pellet ablation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Shock-induced chemistry of phenylacetylene

Gas gun-driven shock compression experiments of phenylacetylene using embedded electromagnetic gauging were used to obtain in situ particle velocity wave profiles at multiple Lagrangian positions at several shock input conditions. At shock conditions above 6 GPa, the input shock wave evolved over time and distance into a complex multiple wave structure due to shock-driven chemical reactions. The 3-wave structure was marked by a fast risetime 2nd wave, slower risetime 3rd wave, and unusual wave dynamics in the 1st wave. From the measured shock and particle velocities, the 1st wave, and intermediate and final product states associated with the chemical reactions were determined. A thermodynamically complete unreacted equation of state was calibrated to estimate the temperature rise along the shock locus. Use of this EOS with the measured 2nd and 3rd wave risetimes yielded highly statesensitive global reaction rates as a function of the shock locus.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ENSTATITE-RICH WARM DEBRIS DUST AROUND HD165014

We present the Spitzer/Infrared Spectrograph spectrum of the main-sequence star HD165014, which is a warm ({approx_gt}200 K) debris disk candidate discovered by the AKARI All-Sky Survey. The star possesses extremely large excess emission at wavelengths longer than 5 {mu}m. The detected flux densities at 10 and 20 {mu}m are {approx}10 and {approx}30 times larger than the predicted photospheric emission, respectively. The excess emission is attributable to the presence of circumstellar warm dust. The dust temperature is estimated as 300-750 K, corresponding to the distance of 0.7-4.4 AU from the central star. Significant fine-structured features are seen in the spectrum and the peak positions are in good agreement with those of crystalline enstatite. Features of crystalline forsterite are not significantly seen. HD165014 is the first debris disk sample that has enstatite as a dominant form of crystalline silicate rather than forsterite. Possible formation of enstatite dust from differentiated parent bodies is suggested according to the solar system analog. The detection of an enstatite-rich debris disk in the current study suggests the presence of large bodies and a variety of silicate dust processing in warm debris disks.

79 ASTRONOMY AND ASTROPHYSICS↗

THE EXTREMELY HIGH VELOCITY OUTFLOW FROM THE LUMINOUS YOUNG STELLAR OBJECT G5.89-0.39

We have imaged the extremely high velocity outflowing gas in CO (2-1) and (3-2) associated with the shell-like ultracompact H II region G5.89-0.39 at a resolution of {approx}3'' (corresponding to {approx}4000 AU) with the Submillimeter Array. The integrated high-velocity ({approx}>45 km s{sup -1}) CO emission reveals at least three blueshifted lobes and two redshifted lobes. These lobes belong to two outflows, one oriented N-S, the other NW-SE. The NW-SE outflow is likely identical to the previously detected Br{gamma} outflow. Furthermore, these outflow lobes all clearly show a Hubble-like kinematic structure. For the first time, we estimate the temperature of the outflowing gas as a function of velocity with large velocity gradient calculations. Our results reveal a clear increasing trend of temperature with gas velocity. The observational features of the extremely high velocity gas associated with G5.89-0.39 qualitatively favor the jet-driven bow shock model.

79 ASTRONOMY AND ASTROPHYSICS↗

Simulating dust grain-radiation coupling on a moving mesh

ABSTRACT We present a model for the interaction between dust and radiation fields in the radiation hydrodynamic code arepo-rt, which solves the moment-based radiative transfer equations on an unstructured moving mesh. Dust is directly treated using live simulation particles, each of which represent a population of grains that are coupled to hydrodynamic motion through a drag force. We introduce methods to calculate radiation pressure on and photon absorption by dust grains. By including a direct treatment of dust, we are able to calculate dust opacities and update radiation fields self-consistently based on the local dust distribution. This hybrid scheme coupling dust particles to an unstructured mesh for radiation is validated using several test problems with known analytic solutions, including dust driven via spherically symmetric flux from a constant luminosity source and photon absorption from radiation incident on a thin layer of dust. Our methods are compatible with the multifrequency scheme in arepo-rt, which treats UV, optical photons as single scattered and IR photons as multi scattered. At IR wavelengths, we model heating of and thermal emission from dust. Dust and gas are not assumed to be in local thermodynamic equilibrium but transfer energy through collisional exchange. We estimate dust temperatures by balancing these dust-radiation and dust-gas energy exchange rates. This framework for coupling dust and radiation can be applied in future radiation hydrodynamic simulations of galaxy formation.

79 ASTRONOMY AND ASTROPHYSICS↗

High-pressure study of the low- Z rich superconductor Be 22 Re

With T c ~ 9.6K, Be 22 Re exhibits one of the highest critical temperatures among Be-rich compounds.We have carried out a series of high-pressure electrical resistivity measurements on this compound to 30 GPa. The data show that the critical temperature T c is suppressed gradually at a rate of dT c /dP = –0.05K/GPa. Using density functional theory (DFT) calculations of the electronic and phonon density of states (DOS) and the measured critical temperature, we estimate that the rapid increase in lattice stiffening in Be 22 Re overwhelms a moderate increase in the electron-ion interaction with pressure, resulting in the decrease in T c . Furthermore, high-pressure x-ray diffraction measurements show that the ambient pressure crystal structure of Be 22 Re persists to at least 154 GPa.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Superconductivity in the Li-B-C system at 100 GPa

Layer Li-B-C compounds have been shown to have feasible superconductivity. Using the adaptive genetic algorithm, we predict the structures of the Li-B-C system at 100 GPa. Here we identify several low-enthalpy metallic phases with stoichiometries of Li B 2 C, Li B 3 C, Li 2 BC 2 , Li 3 B 2 C 3 , Li 3 BC, and Li 5 BC. Using a fast screening method of electron-phonon interaction, we find that Li B 3 C is a promising candidate for superconductivity. The consecutive calculations using the full Brillouin zone confirm the existence of the strong electron-phonon coupling (EPC) in this system. The anharmonic B-C phonon modes near the zone center provide the major contribution to the EPC. The EPC constant is 1.40, and the estimated critical temperature is 22 K. In this paper, we indicate that superconductivity can also happen without a layered structural motif in the Li-B-C system. We also demonstrate an effective strategy for crystal structure prediction of superconducting materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure, stability, and superconductivity of N-doped lutetium hydrides at kbar pressures

Here, the structure of the material responsible for the room temperature and near ambient pressure superconductivity reported in an N-doped lutetium hydride has not been conclusively determined. Herein, density functional theory calculations are performed in an attempt to uncover what it might be. Guided by a range of strategies including crystal structure prediction and modifications of existing structure types, we present an array of Lu-N-H phases that are dynamically stable at experimentally relevant pressures. Although none of the structures found are thermodynamically stable, and none are expected to remain superconducting above ~17 K at 10 kbar, a number of metallic compounds with fcc Lu lattices – as suggested by the experimental X-ray diffraction measurements of the majority phase – are identified. The system whose calculated equation of states matches best with that measured for the majority phase is fluorite-type LuH 2 , whose 10 kbar superconducting critical temperature was estimated to be 0.1 K using the Allen-Dynes modified McMillan equation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sub-band-gap photoconductivity in Co2+-doped ZnO

Variable-temperature and polarized scanning photoconductivity measurements on Zn1-xCoxO epitaxial films allow description of Co2+-derived sub-bandgap photoionization excited states in this archetypal diluted magnetic oxide. Low-temperature (27 K) measurements demonstrate spontaneous ionization from the photo-generated 4T1(P) d-d excited state, despite the highly localized nature of this excitation. Ionization involves relaxation from this d-d state to the lower Co2+/3+ donor-type photoionization level. Variable-temperature photoconductivity measurements reveal an additional thermally assisted ionization process that enhances the d-d photoconductivity at higher temperatures. The energy barrier to thermal ionization from the 4T1(P) excited state at low temperatures is estimated to be Ea ≈ 40 meV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Lattice thermal conductivity of Bi, Sb, and Bi-Sb alloy from first principles

Using first principles, we calculate the lattice thermal conductivity of Bi, Sb, and Bi-Sb alloys, which are of great importance for thermoelectric and thermomagnetic cooling applications. Our calculation reveals that the ninth-neighbor harmonic and anharmonic force constants are significant; accordingly, they largely affect the lattice thermal conductivity. Several features of the thermal transport in these materials are studied: (1) the relative contributions from phonons and electrons to the total thermal conductivity as a function of temperature are estimated by comparing the calculated lattice thermal conductivity to the measured total thermal conductivity, (2) the anisotropy of the lattice thermal conductivity is calculated and compared to that of the electronic contribution in Bi, and (3) the phonon mean free path distributions, which are useful for developing nanostructures to reduce the lattice thermal conductivity, are calculated. In conclusion, the phonon mean free paths are found to range from 10 to 100 nm for Bi at 100 K.

36 MATERIALS SCIENCE↗

Spin dynamics in the stripe-ordered buckled honeycomb lattice antiferromagnet Ba 2 NiTeO 6

We carried out inelastic neutron scattering experiments on a buckled honeycomb lattice antiferromagnet Ba 2 NiTeO 6 exhibiting a stripe structure at a low temperature. Magnetic excitations are observed in the energy range of ℏω≲10 meV having an anisotropy gap of 2 meV at 2 K. We perform spin-wave calculations to identify the spin model. The obtained microscopic parameters are consistent with the location of the stripe structure in the classical phase diagram. Furthermore, the Weiss temperature independently estimated from a bulk magnetic susceptibility is consistent with the microscopic parameters. The results reveal that a competition between the nearest-neighbor and next-nearest-neighbor interactions that together with a relatively large single-ion magnetic anisotropy stabilize the stripe magnetic structure.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Experimental Realization of a Quantum Dot Energy Harvester

We demonstrate experimentally an autonomous nanoscale energy harvester that utilizes the physics of resonant tunneling quantum dots. Gate-defined quantum dots on GaAs/AlGaAs high-electron-mobility transistors are placed on either side of a hot-electron reservoir. The discrete energy levels of the quantum dots are tuned to be aligned with low energy electrons on one side and high energy electrons on the other side of the hot reservoir. Furthermore, the quantum dots thus act as energy filters and allow for the conversion of heat from the cavity into electrical power. Our energy harvester, measured at an estimated base temperature of 75 mK in a He 3 /He 4 dilution refrigerator, can generate a thermal power of 0.13 fW for a temperature difference across each dot of about 67 mK.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigation of 31 P levels near the proton threshold with nuclear resonance fluorescence and the impact on the 30 Si (𝑝,𝛾)⁢ 31 P thermonuclear rate

We investigated the nuclear structure of 31 P near the proton threshold using nuclear resonance fluorescence (NRF) to refine the properties of key resonances in the 30 Si (𝑝,𝛾)⁢ 31 P reaction, which is critical for nucleosynthesis in stellar environments. Excitation energies and spin-parities were determined for several states, including two unobserved resonances at 𝐸 𝑟 = 18.7keV and 𝐸 𝑟 = 50.5keV. The angular correlation analysis enabled the first unambiguous determination of the orbital angular momentum transfer for these states. These results provide a significant update to the 30 Si (𝑝,𝛾)⁢ 31 P thermonuclear reaction rate, with direct implications for models of nucleosynthesis in globular clusters and other astrophysical sites. The revised rate is substantially lower than previous estimates at temperatures below 200 MK, affecting predictions for silicon isotopic abundances in stellar environments. Furthermore, our work demonstrates the power of NRF in constraining nuclear properties, and provides a framework for future studies of low-energy resonances relevant to astrophysical reaction rates.

20 ≤ A ≤ 38↗

Data-Driven Model for Photovoltaic Generation: Comparison with Physical Models Using a Microgrid in Puerto Rico

Photovoltaic (PV) generation is a critical component of microgrids, but its accurate modeling is challenging due to the complex and dynamic interactions between solar irradiance, temperature, and PV system installation. This paper develops a multilayer perceptron (MLP) model that inputs solar irradiance and temperature to estimate the PV generation, and it compares the proposed data-driven model’s performance to two well-known physical models: the single-diode model and the inverter model. The results demonstrate that all the models can reach high levels of accuracy. However, the MLP model outperforms the physical models on average by 4.5 to 6.6 percent in R squared scores and 220 to 290 Watts in RMSE scores, and it does not require physical system parameters. Moreover, the data-driven model can overcome the limitations of the lack of real-time PV generation data.

R pesante colón, Marcos↗