Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomic mass”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Synergistic effects of ultraviolet radiation, thermal cycling, and atomic oxygen on altered and coated Kapton surfaces

The photovoltaic (PV) power system for Space Station Freedom (SSF) uses solar array blankets which provide structural support for the solar cells and house the electrical interconnections. In the low Earth orbital (LEO) environment where SSF will be located, surfaces will be exposed to potentially damaging environmental conditions including solar ultraviolet (UV) radiation, thermal cycling, and atomic oxygen. It is necessary to use ground based tests to determine how these environmental conditions would affect the mass loss and optical properties of candidate SSF blanket materials. Silicone containing, silicone coated, and SiO(x) coated polyimide film materials were exposed to simulated LEO environmental conditions to determine there durability and whether the environmental conditions of UV, thermal cycling and oxygen atoms act synergistically on these materials. A candidate PV blanket material called AOR Kapton, a polysiloxane polyimide cast from a solution mixture, shows an improvement in durability to oxygen atoms erosion after exposure to UV radiation or thermal cycling combined with UV radiation. This may indicate that the environmental conditions react synergistically with this material, and the damage predicted by exposure to atomic oxygen alone is more severe than that which would occur in LEO where atomic oxygen, thermal cycling and UV radiation are present together.

Dever, Joyce A.↗
NASA NTRS1992

Synergistic effects of ultraviolet radiation, thermal cycling and atomic oxygen on altered and coated Kapton surfaces

The photovoltaic (PV) power system for Space Station Freedom (SSF) uses solar array blankets which provide structural support for the solar cells and house the electrical interconnections. In the low earth orbital (LEO) environment where SSF will be located, surfaces will be exposed to potentially damaging environmental conditions including solar ultraviolet (UV) radiation, thermal cycling, and atomic oxygen. It is necessary to use ground based tests to determine how these environmental conditions would affect the mass loss and optical properties of candidate SSF blanket materials. Silicone containing, silicone coated, and SiO(x) coated polyimide film materials were exposed to simulated LEO environmental conditions to determine their durability and whether the environmental conditions of UV, thermal cycling and oxygen atoms act synergistically on these materials. A candidate PV blanket material called AOR Kapton, a polysiloxane polyimide cast from a solution mixture, shows an improvement in durability to oxygen atoms erosion after exposure to UV radiation or thermal cycling combined with UV radiation. This may indicate that the environmental conditions react synergistically with this material, and the damage predicted by exposure to atomic oxygen alone is more severe than that which would occur in LEO where atomic oxygen, thermal cycling and UV radiation are present together.

Dever, Joyce A.↗
NASA NTRS1993

Development of a molecular beam technique to study early solar system silicon reactions

Silicon monoxide is one of the major gas phase silicon bearing components observed in astronomical environments. Silicon oxide serves as the major rock forming material for terrestrial and meteoritic bodies. It is known that several gas phase reactions produce mass independent isotopic fractionations which possess the same delta(O-17)/delta(O-18) ratio observed in Allende inclusions. The general symmetry dependence of the chemically produced mass independent isotopic fractionation process suggests that there are several plausible reactions which could occur in the early solar system which may lead to production of the observed meteoritic oxygen isotopic anomalies. An important component in exploring the role of such processes is the need to experimentally determine the isotopic fractionations for specific reactions of relevance to the early solar system. It has already been demonstrated that atomic oxygen reaction with CO, a major nebular oxygen bearing species, produces a large (approximately 90 percent), mass independent isotopic fractionation. The next hurdle regarding assessing the involvement of symmetry dependent isotopic fractionation processes in the pre-solar nebula is to determine isotopic fractionation factors associated with gas phase reactions of metallic oxides. In particular, a reaction such as O + SiO yields SiO2 is a plausible nebular reaction which could produce a delta(O-17) is approximately delta(O-18) fractionation based upon molecular symmetry considerations. While the isotopic fractionations during silicate evaporation and condensation have been determined, there are no isotopic studies of controlled, gas phase nucleation processes. In order to carefully control the reaction kinetics, a molecular beam apparatus has been constructed. This system produces a supersonic, collimated beam of SiO molecules which is reacted with a second beam of oxygen atoms. An important feature of molecular beams is that they operate at sufficiently low pressures and high temperatures in the jet that avalanche nucleation and clustering processes may be avoided.

Dong, Q. W.↗
DOE OSTI2021

Inelastic scattering in isotopologues of O 2 –Ar: the effects of mass, symmetry, and density of states

The two species considered here, O 2 (oxygen molecule) and Ar (argon-atom), are both abundant components of Earth's atmosphere and hence familiar collision partners in this medium. O 2 is quite reactive and extensively involved in atmospheric chemistry, including Chapman's cycle of the formation and destruction of ozone; while Ar, like N 2 , typically plays the nevertheless crucial role of inert collider. Inert species can provide stabilization to metastable encounter-complexes through the energy transfer associated with inelastic collisions. The interplay of collision frequency and energy transfer efficiency, with state lifetimes and species concentrations, contributes to the rich and varied chemistry and dynamics found in diverse environments ranging from planetary atmospheres to the interstellar and circumstellar media. The nature and density of bound and resonance states, coupled electronic states, symmetry, and nuclear spin-statistics can all play a role. Here, we systematically investigate some of those factors by looking at the O 2 –Ar system, comparing rigorous quantum-scattering calculations for the 16 O 16 O– 40 Ar, 18 O 16 O– 40 Ar, and 18 O 18 O– 40 Ar isotope combinations. A new accurate potential energy surface was constructed for this purpose holding the O 2 bond distance at its vibrationally averaged distance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1993

(abstract) Fundamental Mechanisms of Electrode Kinetics and Alkali Metal Atom Transport at the Alkali Beta'-Alumina/Porous Electrode/Alkali Metal Vapor Three Phase Boundary

The mechanisms of electrode kinetics and mass transport of alkali metal oxidation and alkali metal cation reduction at the solid electrolyte/porous electrode boundary as well as alkali metal transport through porous metal electrodes has important applications in optimizing device performance in alkali metal thermal to electric converter (AMTEC) cells which are high temperature, high current density electrochemical cells. Basic studies of these processes also affords the opportunity to investigate a very basic electrochemical reaction over a wide range of conditions; and a variety of mass transport modes at high temperatures via electrochemical techniques. The temperature range of these investigations covers 700K to 1240K; the alkali metal vapor pressures range from about 10(sup -2) to 10(sup 2) Pa; and electrodes studied have included Mo, W, Mo/Na(sub 2)MoO(sub 4), W/Na(sub 2)WO(sub 4), WPt(sub x), and WRh(sub x) (1.0 < x < 6.0 ) with Na at Na-beta'-alumina, and Mo with K at K-beta'-alumina. Both liquid metal/solid electrolyte/alkali metal vapor and alkali metal vapor/solid electrolyte/vapor cells have been used to characterize the reaction and transport processes. We have previously reported evidence of ionic, free molecular flow, and surface transport of sodium in several types of AMTEC electrodes.

electrode kinetics thermal to electric conversion ↗
DOE OSTI2024

The photoionization of methoxymethanol: Fingerprinting a reactive C 2 oxygenate in a complex reactive mixture

Methoxymethanol (CH 3 OCH 2 OH) is a reactive C 2 ether-alcohol that is formed by coupling events in both heterogeneous and homogeneous systems. It is found in complex reactive environments—for example those associated with catalytic reactors, combustion systems, and liquid-phase mixtures of oxygenates. Using tunable synchrotron-generated vacuum-ultraviolet photons between 10.0 and 11.5 eV, we report on the photoionization spectroscopy of methoxymethanol. We determine that the lowest-energy photoionization process is the dissociative ionization of methoxymethanol via H-atom loss to produce [C 2 H 5 O 2 ] + , a fragment cation with a mass-to-charge ratio (m/z) = 61.029. Here, we measure the appearance energy of this fragment ion to be 10.24 ± 0.05 eV. The parent cation is not detected in the energy range examined. To elucidate the origin of the m/z = 61.029 (C 2 H 5 O 2 ) fragment, we used automated electronic structure calculations to identify key stationary points on the cation potential energy surface and compute conformer-specific microcanonical rate coefficients for the important unimolecular processes. The calculated H-atom dissociation pathway results in a [C 2 H 5 O 2 ] + fragment appearance at 10.21 eV, in excellent agreement with experimental results.

Hansen, Niko A.↗
DOE OSTI2021

Improving intrinsic oxygen reduction activity and stability: Atomic layer deposition preparation of platinum-titanium alloy catalysts

Improved activity and stability Pt-based catalysts for the oxygen reduction reaction (ORR) are needed to perpetuate the deployment of polymer electrolyte fuel cells (PEFCs) in the transportation sector. In this study, we use atomic layer deposition of TiO 2 and Pt coupled with thermal reductive annealing to prepare Pt 3 Ti electrocatalysts. The atomic level synthetic control resulted in Pt 3 Ti nanoparticles with high ORR performance, including a mass activity of 1.84 A/mg Pt and excellent electrochemical stability. The Pt 3 Ti nanoparticles show excellent specific activity — 5.3-fold higher than commercial Pt/C and 3-fold higher than polycrystalline Pt, exceeding the performance of any PtTi catalysts reported to date. Combined experimental and computational efforts indicate that Pt enrichment on the Pt 3 Ti enhances the activity, and the intrinsic stability of the Pt 3 Ti phase provides durability. Subsequently, this knowledge, along with the facile fabrication of alloys by atomic layer deposition, can be leveraged to designed improved performance catalysts.

25 ENERGY STORAGE↗
DOE OSTI2022

Achieving complete electrooxidation of ethanol by single atomic Rh decoration of Pt nanocubes

Significance Direct ethanol fuel cells are attracting growing attention as portable power sources due to their advantages such as higher mass-energy density than hydrogen and less toxicity than methanol. However, it is challenging to achieve the complete electrooxidation to generate 12 electrons per ethanol, resulting in a low fuel utilization efficiency. This manuscript reports the complete ethanol electrooxidation by engineering efficient catalysts via single-atom modification. The combined electrochemical measurements, in situ characterization, and density functional theory calculations unravel synergistic effects of single Rh atoms and Pt nanocubes and identify reaction pathways leading to the selective C–C bond cleavage to oxidize ethanol to CO 2 . This study provides a unique single-atom approach to tune the activity and selectivity toward complicated electrocatalytic reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1983

Far-IR spectroscopy of the galactic center: Neutral and ionized gas in the central 10 pc of the galaxy

The 3P1 - 3P2 fine structure line emission from neutral atomic oxygen at 63 microns in the vicinity of the galactic center was mapped. The emission is extended over more than 4' (12 pc) along the galactic plane, centered on the position of Sgr A West. The line center velocities show that the O I gas is rotating around the galactic center with an axis close to that of the general galactic rotation, but there appear also to be noncircular motions. The rotational velocity at R is approximately 1 pc corresponds to a mass within the central pc of about 3 x 10(6) solar mass. Between 1 and 6 pc from the center the mass is approximately proportional to radius. The (O I) line probability arises in a predominantly neutral, atomic region immediately outside of the ionized central parsec of out galaxy. Hydrogen densities in the (O I) emitting region are 10(3) to 10(6) cm(-3) and gas temperatures are or = 100 K. The total integrated luminosity radiated in the line is about 10(5) solar luminosity, and is a substantial contribution to the cooling of the gas. Photoelectric heating or heating by ultraviolet excitation of H2 at high densities (10(5) cm(-3)) are promising mechanisms for heating of the gas, but heating due to dissipation of noncircular motions of the gas may be an alternative possibility. The 3P1 - 3P0 fine structure line of (O III) at 88 microns toward Sgr A West was also detected. The (O III) emission comes from high density ionized gas (n 10(4) cm(-3)), and there is no evidence for a medium density region (n 10(3) cm(-3)), such as the ionized halo in Sgr A West deduced from radio observations. This radio halo may be nonthermal, or may consist of many compact, dense clumps of filaments on the inner edges of neutral condensations at R or = 2 pc.

Hollenbach, D. J.↗
DOE OSTI2022

Comprehensive Analysis of the Neutrino Process in Core-collapsing Supernovae

We investigate the neutrino flavor change effects due to neutrino self-interaction and shock wave propagation, as well as the matter effects on the neutrino process in core-collapsing supernovae (CCSNe). For the hydrodynamics, we use two models: a simple thermal bomb model and a specified hydrodynamics model for SN1987A. For the presupernova model, we take an updated model, adjusted to explain SN1987A, which employs recent developments in the (n, γ) reaction rates for nuclei near the stability line (A ~ 100). As for the neutrino luminosity, we adopt two different models: equivalent neutrino luminosity and nonequivalent luminosity models. The latter is taken from a synthetic analysis of CCSN simulation data, which quantitatively presented the results obtained by various neutrino transport models. Relevant neutrino-induced reaction rates are calculated using a shell model for light nuclei and a quasiparticle random phase approximation model for heavy nuclei. For each model, we present abundances of the light nuclei ( 7 Li, 7 Be, 11 B, and 11 C) and the heavy nuclei ( 92 Nb, 98 Tc, 138 La, and 180 Ta) produced by the neutrino process. The light nuclei abundances turn out to be sensitive to the Mikheyev–Smirnov–Wolfenstein (MSW) region around O-Ne-Mg layer while the heavy nuclei are mainly produced prior to the MSW region. Through detailed analyses, we find that neutrino self-interaction becomes a key ingredient, in addition to the MSW effect, for understanding the neutrino process and the relevant nuclear abundances. The normal mass hierarchy is shown to be more compatible with the meteorite data. The main nuclear reactions for each nucleus are also investigated in detail.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1991

A flowfield coupled excitation and radiation model for nonequilibrium reacting flows

A second-order method is developed to correct a radiative transfer analysis for possible local thermodynamic nonequilibrium (LTNE) effects. It uses a two-species excitation model for nitrogen with chemical raction rates obtained from the Kunc and Soon (1989) atomic transition method. A vibrational energy equation is added to calculate a third temperature, which describes the average vibrational energy state of all the diatomic species. A new diffusional model is developed to improve the calculation of the diffusional fluxes of mass and energy, and second-order radiative correction factors are developed for a two-step excitation model for atomic nitrogen. Radiation reaching the wall with the second-order LTNE model shows a greater IR-line contribution and less UV-line center absorption than the first-order one.

Gally, Thomas A.↗
DOE OSTI2021

Fundamental symmetry tests in the lepton sector [Slides]

The observation of neutrino oscillation confirms neutrinos have mass. The discovery of neutrino oscillation implies nonzero neutrino mass. Search for neutrinoless double beta decay is a probe of Majorana mass.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

An Asymmetric Dust Ring around a Very Low Mass Star ZZ Tau IRS

We present Atacama Large Millimeter/submillimeter Array (ALMA) gas and dust observations at band 7 (339 GHz: 0.89 mm) of the protoplanetary disk around a very low mass star ZZ Tau IRS with a spatial resolution of 025. The {sup 12}CO J = 3 → 2 position–velocity diagram suggests a dynamical mass of ZZ Tau IRS of ∼0.1–0.3 M {sub ☉}. The disk has a total flux density of 273.9 mJy, corresponding to an estimated mass of 24–50 M {sub ⊕} in dust. The dust emission map shows a ring at r = 58 au and an azimuthal asymmetry at r = 45 au with a position angle of 135°. The properties of the asymmetry, including radial width, aspect ratio, contrast, and contribution to the total flux, were found to be similar to the asymmetries around intermediate mass stars (∼2 M {sub ☉}) such as MWC 758 and IRS 48. This implies that the asymmetry in the ZZ Tau IRS disk shares a similar origin with others, despite the star being ∼10 times less massive. Our observations also suggest that the inner and outer parts of the disk may be misaligned. Overall, the ZZ Tau IRS disk shows evidence of giant planet formation on a ∼10 au scale at a few megayears. If confirmed, it will challenge existing core accretion models in which such planets have been predicted to be extremely hard to form around very low mass stars.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2026

Improved Accuracy in Semi-Experimental Structure Determination by Resolving Problems Associated with Rotation of Principal Inertial Axes of Isotopologues: Structures of 1,3-Oxazole ( c -C 3 H 3 NO)

The rotational spectrum of the normal isotopologue of 1,3-oxazole (c-C 3 H 3 NO) was observed from 43 to 750 GHz. Over 3900 transitions for the ground vibrational state are measured, assigned, and least-squares fit to sextic centrifugally distorted-rotor Hamiltonians. The measured frequencies and resulting spectroscopic constants from this extended spectral range, combined with previous measurements of the nuclear quadrupole coupling constants, will facilitate astronomical searches for oxazole across the majority of the range of modern radiotelescopes. Spectra for a set of 30 oxazole isotopologues, which include multiple isotopic substitutions of each atom, are used to determine the first semi-experimental equilibrium ($r$$^{SE}_{e}$) structure and semi-experimental substitution structure ($r$$^{SE}_{e}$), each using CCSD(T) computed values for the vibration–rotation interaction and electron-mass corrections. The large number of isotopologues, including 21 isotopologues observed for the first time, and the redundant substitutions of each atom provide sufficient spectroscopic information to determine the $r$$^{SE}_{e}$ structure with the expected high level of accuracy and precision (0.0001 or 0.0002 Å in bond distances and 0.013 to 0.025° in bond angles). In the course of this study, we analyzed a known issue for some $r$$^{SE}_{e}$ structure determinations of near-oblate asymmetric tops in which inclusion of individual isotopologues degrades the structure determination. We demonstrate that this problem primarily arises from the difference in the values of the computed vibration–rotation interaction corrections as evaluated at the computed re geometry vs the $r$$^{SE}_{e}$ geometry of the “real” molecule. Our solution to this problem substantially improves the $r$$^{SE}_{e}$ structure of oxazole and likely can be generalized to many other molecules.

Chemical structure↗
NASA NTRS1989

In-space technology development: Atomic oxygen and orbital debris effects

Earlier Shuttle flight experiments have shown atomic oxygen within the orbital environment can interact with many materials to produce surface recession and mass loss and combine catalytically with other constituents to generate visible and infrared glows. In addition to these effects, examinations of returned satellite hardware have shown many spacecraft materials are also susceptible to damage from high velocity impacts with orbital space debris. These effects are of particular concern for large, multi-mission spacecraft, such as Space Station and SDI operational satellites, that will operate in low-Earth orbit (LEO) during the late 1990's. Not only must these spacecraft include materials and exterior coatings that are resistant to atomic oxygen surface interactions, but these materials must also provide adequate protection against erosion and pitting that could result from numerous impacts with small particles (less than 100 microns) of orbital space debris. An overview of these concerns is presented, and activities now underway to develop materials and coatings are outlined that will provide adequate atomic protection for future spacecraft. The report also discusses atomic oxygen and orbital debris flight experiments now under development to expand our limited data base, correlate ground-based measurments with flight results, and develop an orbital debris collision warning system for use by future spacecraft.

Visentine, James T.↗
DOE OSTI2020

Spatially resolved absolute densities of reactive species and positive ion flux in He-O 2 RF-driven atmospheric pressure plasma jet: touching and non-touching with dielectric substrate

Atmospheric pressure plasma jets (APPJs) are operating in direct contact with dielectric substrates for many applications. Nonetheless, many studies have been focusing on free jets. In this letter, we report spatially resolved measurements of reactive species including neutral and ionic species in an He + 1% O 2 RF-driven APPJ by molecular beam mass spectrometry equipped with a dielectric sampling plate, enabling to detect species densities for APPJ operating remotely or in direct contact with a substrate. Here, the spatially resolved distribution of O, O 2 (a 1 Δ g ) and O 3 is dominated by convection and, remarkably, shows minimum differences between touching and non-touching conditions.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS1985

Experimental study of the spray characteristics of a research airblast atomizer

Airblast atomization was studied using a especially designed atomizer in which the liquid first impinges on a splash plate, then is directed radially outward and is atomized by the air passing through two concentric, vaned swirlers that swirl the air in opposite directions. The effect of flow conditions, air mass velocity (mass flow rate per unit area) and liquid to air ratio on the mean drop size was studied. Seven different ethanol solutions were used to simulate changes in fuel physical properties. The range of atomizing air velocities was from 30 to 80 m/s. The mean drop diameter was measured at ambient temperature (295 K) and atmospheric pressure.

Acosta, W. A.↗