Search NASA⌕ Search

SEARCH · Search NASA

Results for “cloud dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

The effect of finite-amplitude baroclinic waves on passive, low-level, atmospheric constituents, with applications to comma cloud evolution

The redistribution of a low-level, passive constituent of the atmosphere under the influence of a growing baroclinic wave is examined by a series of analytical calculations based on a two-level, highly truncated model. It is shown that a constituent confined to the lower half of the atmosphere, and initially homogeneous in the horizontal, will tend to achieve maximum concentration in the low pressure/warm sector portion of the wave and minimum concentration in the high pressure/cold outbreak region with sharpest gradient between the maxima and minima roughly coinciding with the cold front. This distribution is further accentuated if an initial meridional gradient of the constituent exists. Assuming as a rough first approximation, that water vapor can be considered to be such a passive constituent, it is shown that the implied relative humidity field and cloud distribution will tend to evolve into the comma-type form commonly observed on satellite images of mid-latitude cyclone waves. Moreover, the solution is shown to replicate the complex flow regime associated with the comma formation, elucidating the dynamical roles of vertical motion and advection in the cloud evolution.

Saltzman, B.↗

S 5 : Probing the Milky Way and Magellanic Clouds potentials with the 6D map of the Orphan–Chenab stream

We present a 6D map of the Orphan–Chenab (OC) stream by combining the data from Southern Stellar Stream Spectroscopic Survey (S 5 ) and Gaia. We reconstruct the proper motion, radial velocity, distance, on-sky track, and stellar density along the stream with spline models. The stream has a total luminosity of M V = -8.2 and metallicity of [Fe/H] = -1.9, similar to classical Milky Way (MW) satellites like Draco. The stream shows drastic changes in its physical width varying from 200 pc to 1kpc, but a constant line-of-sight velocity dispersion of 5 km s -1 . Despite the large apparent variation in the stellar number density along the stream, the flow rate of stars along the stream is remarkably constant. We model the 6D stream track by a Lagrange-point stripping method with a flexible MW potential in the presence of a moving extended Large Magellanic Cloud (LMC). This allows us to constrain the mass profile of the MW within the distance range 15.6 < r < 55∙5 kpc, with the best measured enclosed mass of (2.85 ± 0.1) X 10 11 M ⊙ within 32.4 kpc. Our stream measurements are highly sensitive to the LMC mass profile with the most precise measurement of its enclosed mass made at 32.8 kpc, 7.02 ± 0.9) X 10 11 M ⊙ . We also detect that the LMC dark matter halo extends to at least 53 kpc. The fitting of the OC stream allows us to constrain the past LMC trajectory and the degree of dynamical friction it experienced. We demonstrate that the stars in the OC stream show large energy and angular momentum spreads caused by LMC perturbation.

79 ASTRONOMY AND ASTROPHYSICS↗

Collapse of primordial gas clouds and the formation of quasar black holes

The formation of quasar black holes during the hydrodynamic collapse of protogalactic gas clouds is discussed. The dissipational collapse and long-term dynamical evolution of these systems is analyzed using three-dimensional numerical simulations. The calculations focus on the final collapse stages of the inner baryonic component and therefore ignore the presence of dark matter. Two types of initial conditions are considered: uniformly rotating spherical clouds, and iirotational ellipsoidal clouds. In both cases the clouds are initially cold, homogeneous, and not far from rotational support (T/(absolute value of W) approximately equals 0.1). Although the details of the dynamical evolution depend sensitively on the initial conditions, the qualitative features of the final configurations do not. Most of the gas is found to fragment into small dense clumps, that eventually make up a spheroidal component resembling a galactic bulge. About 5% of the initial mass remains in the form of a smooth disk of gas supported by rotation in the gravitational potential potential well of the outer spheroid. If a central seed black hole of mass approximately greater than 10(exp 6) solar mass forms, it can grow by steady accretion from the disk and reach a typical quasar black hole mass approximately 10(exp 8) solar mass in less than 5 x 10(exp 8) yr. In the absence of a sufficiently massive seed, dynamical instabilities in a strongly self-gravitating inner region of the disk will inhibit steady accretion of gas and may prevent the immediate formation of quasar.

Loeb, Abraham↗

ARCLITE: the Arctic Lidar Technology Facility at Sondre Stromfjord, Greenland

SRI International is presently developing an Arctic lidar (ARCLITE) facility at the incoherent-scatter radar site in Sondre Stromfjord, Greenland (67.0 degrees N, 209.2 degrees W). The project, funded by NSF through the CEDAR (Coupling Energetics and Dynamics of Atmospheric Regions) initiative, is to perform high-altitude molecular/aerosol backscatter measurements in the Arctic covering the stratosphere/mesosphere region during nighttime and daytime conditions. The lidar system employs an injection seeded, high-energy GCR-5 Spectra Physics Nd:YAG laser for primary operation at 532 nm (550 mJ per pulse at 30 Hz). The receiver system is designed around a 36-inch Cassegrainian telescope of astronomical quality with receiver components and photon-counting electronics for day and night operations. The Rayleigh backscatter measurements will conduct investigations concerning long-term studies of the basic density and temperature structure of the Arctic stratosphere/mesosphere region; effects of stratospheric warming on the structure of the stratosphere/mesosphere region; occurrence and properties of polar stratospheric clouds; occurrence of noctilucent clouds and their properties at high latitudes; and dynamic and thermodynamic coupling between the stratosphere/mesosphere region and the lower thermosphere.

Thayer, J. P.↗

The role of the turbulence driving mode for the initial mass function

Turbulence is a critical ingredient for star formation, yet its role for the initial mass function (IMF) is not fully understood. Here we perform magnetohydrodynamical (MHD) simulations of star cluster formation including gravity, turbulence, magnetic fields, stellar heating, and outflow feedback to study the influence of the mode of turbulence driving on IMF. We find that simulations that employ purely compressive turbulence driving (COMP) produce a higher fraction of low-mass stars as compared to simulations that use purely solenoidal driving (SOL). The characteristic (median) mass of the sink particle (protostellar) distribution for COMP is shifted to lower masses by a factor of ∼1.5 compared to SOL. Our simulation IMFs capture the important features of the observed IMF form. We find that turbulence-regulated theories of the IMF match our simulation IMFs reasonably well in the high-mass and low-mass range, but underestimate the number of very low-mass stars, which form towards the later stages of our simulations and stop accreting due to dynamical interactions. Our simulations show that for both COMP and SOL, the multiplicity fraction is an increasing function of the primary mass, although the multiplicity fraction in COMP is higher than that of SOL for any primary mass range. We find that binary mass ratio distribution is independent of the turbulence driving mode. The average specific angular momentum of the sink particles in SOL is a factor of 2 higher than that for COMP. Overall, we conclude that the turbulence driving mode plays a significant role in shaping the IMF.

79 ASTRONOMY AND ASTROPHYSICS↗

Lagrangian particle simulation of hydrogen pellets and SPI into runaway electron beam in ITER

Numerical studies of the ablation of pellets and shattered pellet injection (SPI) fragments into a runaway electron beam in ITER have been performed using a time-dependent pellet ablation code [Samulyak et al., Nucl. Fusion, 61(4), 046007 (2021)]. The code resolves detailed ablation physics near pellet fragments and large-scale expansion of ablated clouds. The study of a single-fragment ablation quantifies the influence of various factors, in particular, the impact ionization by runaway electrons and cross-field transport models, on the dynamics of ablated plasma and its penetration into the runaway beam. Simulations of SPI performed using different numbers of pellet fragments study the formation and evolution of the ablation clouds and their large-scale dynamics in ITER. In conclusion, the penetration depth of the ablation clouds is found to be of the order of 50 cm.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Volatile Fraction of Comets as Quantified at Infrared Wavelengths - An Emerging Taxonomy and Implications for Natal Heritage

It is relatively easy to identify the reservoir from which a given comet was ejected. But dynamical models demonstrate that the main cometary reservoirs (Kuiper Belt, Oort Cloud) each contain icy bodies that formed in a range of environments in the protoplanetary disk, and the Oort Cloud may even contain bodies that formed in disks of sibling stars in the Sun s birth cluster. The cometary nucleus contains clues to the formative region(s) of its individual components. The composition of ices and rocky grains reflect a range of processes experienced by material while on the journey from the natal interstellar cloud core to the cometary nucleus. For that reason, emphasis is placed on classifying comets according to their native ices and dust (rather than orbital dynamics). Mumma & Charnley [1] reviewed the current status of taxonomies for comets and relation to their natal heritage.

Mumma, M. J.↗

Partition between supercooled liquid droplets and ice crystals in mixed-phase clouds based on airborne in situ observations

Abstract. The onset of ice nucleation in mixed-phase clouds determines the lifetime and microphysical properties of ice clouds. In this work, we develop a novel method that differentiates between various phases of mixed-phase clouds, such as clouds dominated by pure liquid or pure ice segments, compared with those having ice crystals surrounded by supercooled liquid water droplets or vice versa. Using this method, we examine the relationship between the macrophysical and microphysical properties of Southern Ocean mixed-phase clouds at −40 to 0 °C (e.g. stratiform and cumuliform clouds) based on the in situ aircraft-based observations during the US National Science Foundation Southern Ocean Clouds, Radiation, Aerosol Transport Experimental Study (SOCRATES) flight campaign. The results show that the exchange between supercooled liquid water and ice crystals from a macrophysical perspective, represented by the increasing spatial ratio of regions containing ice crystals relative to the total in-cloud region (defined as ice spatial ratio), is positively correlated with the phase exchange from a microphysical perspective, represented by the increasing ice water content (IWC), decreasing liquid water content (LWC), increasing ice mass fraction, and increasing ice particle number fraction (IPNF). The mass exchange between liquid and ice becomes more significant during phase 3 when pure ice cloud regions (ICRs) start to appear. Occurrence frequencies of cloud thermodynamic phases show a significant phase change from liquid to ice at a similar temperature (i.e. −17.5 °C) among three types of definitions of mixed-phase clouds based on ice spatial ratio, ice mass fraction, or IPNF. Aerosol indirect effects are quantified for different phases using number concentrations of aerosols greater than 100 or 500 nm (N>100 and N>500, respectively). N>500 shows stronger positive correlations with ice spatial ratios compared with N>100. This result indicates that larger aerosols potentially contain ice-nucleating particles (INPs), which facilitate the formation of ice crystals in mixed-phase clouds. The impact of N>500 is also more significant in phase 2 when ice crystals just start to appear in the mixed phase compared with phase 3 when pure ICRs have formed, possibly due to the competing aerosol indirect effects on primary and secondary ice production in phase 3. The thermodynamic and dynamic conditions are quantified for each phase. The results show stronger in-cloud turbulence and higher updraughts in phases 2 and 3 when liquid and ice coexist compared with pure liquid or ice (phases 1 and 4, respectively). The highest updraughts and turbulence are seen in phase 3 when supercooled liquid droplets are surrounded by ice crystals. These results indicate both updraughts and turbulence support the maintenance of supercooled liquid water amongst ice crystals. Overall, these results illustrate the varying effects of aerosols, thermodynamics, and dynamics through various stages of mixed-phase cloud evolution based on this new method that categorizes cloud phases.

54 ENVIRONMENTAL SCIENCES↗

Spatially Resolving Ocean Color and Sediment Dispersion in River Plumes, Coastal Systems, and Continental Shelf Waters

Satellite remote sensing of ocean color in dynamic coastal, inland, and nearshorewaters is impeded by high variability in optical constituents, demands specialized atmospheric correction, and is limited by instrument sensitivity. To accurately detect dispersion of bio-optical properties, remote sensors require ample signal-to-noise ratio (SNR) to sense small variations in ocean color without saturating over bright pixels, an atmospheric correction that can accommodate significantwater-leaving radiance in the near infrared (NIR), and spatial and temporal resolution that coincides with the scales of variability in the environment. Several current and historic space-borne sensors have met these requirements with success in the open ocean, but are not optimized for highly red-reflective and heterogeneous waters such as those found near river outflows or in the presence of sediment resuspension. Here we apply analytical approaches for determining optimal spatial resolution, dominant spatial scales of variability ("patches"), and proportions of patch variability that can be resolved from four river plumes around the world between 2008 and 2011. An offshore region in the Sargasso Sea is analyzed for comparison. A method is presented for processing Moderate Resolution Imaging Spectroradiometer (MODIS) Aqua and Terra imagery including cloud detection, stray lightmasking, faulty detector avoidance, and dynamic aerosol correction using short-wave- and near-infrared wavebands in extremely turbid regions which pose distinct optical and technical challenges. Results showthat a pixel size of approx. 520 mor smaller is generally required to resolve spatial heterogeneity in ocean color and total suspended materials in river plumes. Optimal pixel size increases with distance from shore to approx. 630 m in nearshore regions, approx 750 m on the continental shelf, and approx. 1350 m in the open ocean. Greater than 90% of the optical variability within plume regions is resolvable with 500 m resolution, and small, but significant, differences were found between peak and nadir river flow periods in terms of optimal resolution and resolvable proportion of variability.

MODIS↗

Comet showers and the steady-state infall of comets from the Oort cloud

The theoretically-determined location of the boundary between semimajor axes of those comets entering the planetary system only in bursts or showers, and those which arrive in a steady stream, is abrupt and falls at the observed inner edge of the Oort cloud. It is proposed that the comets were formed in the outer parts of the collapsing protosun, which had a radius of less than 5000 AU. If so, then: (1) a first-generation comet cloud may have been produced, with a radius of more than 1000 AU, and the coupled dynamical perturbations of passing stars and Jupiter would lead to the formation of a comet cloud similar to the Oort; while (2) if the Oort cloud comets originated in this inner cloud, and were later ejected into their present orbits by the perturbations of passing stars and Jupiter, the total inner cloud mass is two orders of magnitude greater than that of the Oort cloud.

Hills, J. G.↗

The Influence of Cloud Types on Cloud–Radiative Forcing During DYNAMO/AMIE

Cloud-radiative feedback is known to be an important process for the Madden-Julian Oscillation (MJO) and its accurate representation in general circulation models. The MJO is known to have a stronger cloud-radiative feedback compared to higher frequency convectively coupled equatorial waves (CCEW), for reasons that remain unclear. The objective of this study is to use data from the Dynamics of the MJO/Atmospheric Radiation Measurement MJO Investigation Experiment field campaign to investigate how cloud type evolution and their associated cloud-radiative forcing (CRF) differ between the MJO and CCEWs and their application to MJO dynamics under moisture mode theory. This study finds that the amplitude of CRF is the largest within the MJO compared to the higher frequency CCEWs, and CRF maximizes after the maximum precipitation (enhanced phase) of the MJO. We suggest this delay in the timing of maximum CRF occurs because most cloud types (congestus, deep, anvil, and cirrus) simultaneously maximize in frequency after the enhanced phase of the MJO, which is not seen for the higher frequency CCEWs. These specific cloud types help maintain the MJO through their radiatively-driven moistening which acts to prolong the enhanced phase of the MJO. The decomposition of radiatively-driven moistening by cloud types shows that simultaneous moistening by deep, anvil, and congestus clouds are particularly responsible for the maintenance of the MJO under moisture mode theory. Further, this analysis suggests the importance of capturing the correct evolution of different cloud types and their associated radiative effects to better understand the thermodynamics of the MJO.

54 ENVIRONMENTAL SCIENCES↗

Structural analysis of stratocumulus convection

The 1 and 20 Hz data are examined from the Electra flights made on July 5, 1987. The flight legs consisted of seven horizontal turbulent legs at the inversion, midcloud, and below clouds, plus 4 soundings made within the same period. The Rosemont temperature sensor and the top and bottom dewpoint sensors were used to measure temperature and humidity at 1 Hz. Inversion structure and entrainment; local dynamics and large scale forcing; convective elements; and decoupling of cloud and subcloud are discussed in relationship to the results of the Electra flight.

Siems, S. T.↗

NASA's Implementation of Cloud Services for Human Space Flight

Cloud is a tried-and-true technology used throughout United States government agencies, including the National Aeronautics and Space Administration (NASA). With reliable results and infrequent downtimes, cloud allows for secure remote access, customizability, and streamlined monitoring options, creating an environment for better data integrity and availability. As NASA increasingly migrates functions to the cloud, the Space Communications and Navigation Program (SCaN) program has been investigating how this capability can be leveraged to provide communication services to its users and customers. Currently, missions such as NASA-ISRO Synthetic Aperture Radar (NISAR), Plankton, Aerosol, Cloud, ocean Ecosystem (PACE), and Roman Space Telescope (RST) are planned to incorporate cloud into their data delivery architecture. However, SCaN is looking to expand further. This conversion to using cloud services allows for greater availability of mission data for both robotic and human space flight (HSF)missions. The SCaN program and the Near Space Network (NSN) are working to consolidate resources and create a cloud environment suitable for the entirety of the SCaN program network architecture. SCaN is in the process of finalizing its cloud architecture and soon will be implementing cloud services. The new services used will adhere to federal regulations including Federal Risk and Authorization Management Program (FedRAMP), which is built upon National Institute of Standards and Technology (NIST)documentation. While keeping in mind these security requirements, an auxiliary objective of the cloud integration is to ensure the most cost-efficient solution; providing a scalable, robust and resilient system. Using cloud services, NASA will gain access to better centralized monitoring and management features, along with customizable services on a pay-per-use plan. With the ever-growing NASA mission data volume needs, maintaining ample storage space is another major constraint. Processing and storing such large amounts of data, on the order of terabytes a day, requires dynamic processing capability which is inherently a strength of cloud computing. By routing this data from ground stations through the cloud, there will be greater ease of access for both SCaN and the user community. Artificial intelligence and other built-in cloud functions can also enhance efficiency, improving data processing time. Thereby also allowing for better data availability. As we look to the future of cloud services, NASA will continue to leverage capabilities that will benefit NASA’s ability to provide cost-effective communication services. This paper further outlines the evolution of cloud use by SCaN in the context of Human Space Flight.

cloud storage↗

Simulation of Boundary-Layer Cumulus and Stratocumulus Clouds using a Cloud-Resolving Model With Low- and Third-Order Turbulence Closures

The effects of subgrid-scale condensation and transport become more important as the grid spacings increase from those typically used in large-eddy simulation (LES) to those typically used in cloud-resolving models (CRMs). Incorporation of these effects can be achieved by a joint probability density function approach that utilizes higher-order moments of thermodynamic and dynamic variables. This study examines how well shallow cumulus and stratocumulus clouds are simulated by two versions of a CRM that is implemented with low-order and third-order turbulence closures (LOC and TOC) when a typical CRM horizontal resolution is used and what roles the subgrid-scale and resolved-scale processes play as the horizontal grid spacing of the CRM becomes finer. Cumulus clouds were mostly produced through subgrid-scale transport processes while stratocumulus clouds were produced through both subgrid-scale and resolved-scale processes in the TOC version of the CRM when a typical CRM grid spacing is used. The LOC version of the CRM relied upon resolved-scale circulations to produce both cumulus and stratocumulus clouds, due to small subgrid-scale transports. The mean profiles of thermodynamic variables, cloud fraction and liquid water content exhibit significant differences between the two versions of the CRM, with the TOC results agreeing better with the LES than the LOC results. The characteristics, temporal evolution and mean profiles of shallow cumulus and stratocumulus clouds are weakly dependent upon the horizontal grid spacing used in the TOC CRM. However, the ratio of the subgrid-scale to resolved-scale fluxes becomes smaller as the horizontal grid spacing decreases. The subcloud-layer fluxes are mostly due to the resolved scales when a grid spacing less than or equal to 1 km is used. The overall results of the TOC simulations suggest that a 1-km grid spacing is a good choice for CRM simulation of shallow cumulus and stratocumulus.

Xu, Kuan-Man↗

Interstellar Magnetic Fields and Polarimetry of Dust Emission

Magnetic fields are an important ingredient in the stormy cosmos. Magnetic fields: (1) are intimately involved with winds from Active Galactic Nuclei (AGN) and stars (2) create at least some of the structures observed in the ISM (3) modulate the formation of clouds, cores, and stars within a turbulent medium (4) may be dynamically important in protostellar accretion disks (5) smooth weak shocks (C-shocks).

stormy cosmos↗

Impact of Aerosols on Convective Clouds and Precipitation

Aerosols are a critical.factor in the atmospheric hydrological cycle and radiation budget. As a major agent for clouds to form and a significant attenuator of solar radiation, aerosols affect climate in several ways. Current research suggests that aerosols have a major impact on the dynamics, microphysics, and electrification properties of continental mixed-phase convective clouds. In addition, high aerosol concentrations in urban environments could affect precipitation variability by providing a significant source of cloud condensation nuclei (CCN). Such pollution . effects on precipitation potentially have enormous climatic consequences both in terms of feedbacks involving the land surface via rainfall as well as the surface energy budget and changes in latent heat input to the atmosphere. Basically, aerosol concentrations can influence cloud droplet size distributions, the warm-rain process, the cold-rain process, cloud-top heights, the depth of the mixed-phase region, and the occurrence of lightning. Recently, many cloud resolution models (CRMs) have been used to examine the role of aerosols on mixed-phase convective clouds. These modeling studies have many differences in terms of model configuration (two- or three-dimensional), domain size, grid spacing (150-3000 m), microphysics (two-moment bulk, simple or sophisticated spectral-bin), turbulence (1st or 1.5 order turbulent kinetic energy (TKE)), radiation, lateral boundary conditions (i.e., closed, radiative open or cyclic), cases (isolated convection, tropical or midlatitude squall lines) and model integration time (e.g., 2.5 to 48 hours). Among these modeling studies, the most striking difference is that cumulative precipitation can either increase or decrease in response to higher concentrations of CCN. In this presentation, we review past efforts and summarize our current understanding of the effect of aerosols on convective precipitation processes. Specifically, this paper addresses the following topics: observational evidence of the effect of aerosols on precipitation processes, and results from (CRM) simulations. Note that this presentation is mainly based on a recent paper published in Geophy. Rev. (Tao et al. 2012).

Tao, Wei-Kuo↗

Lessons from Earth Aerobiology for Venus Astrobiology

Venus’s clouds have often suggested as a possible habitat. The constraints governing putative airborne life in such a habitat in turn inform priorities and strategies for remote and in situ exploration, methods by which resulting biosignatures might be detected, exoplanet habitability assessment, and planetary protection concerns. Lessons drawn from studying Earth’s aerobiosphere can help improve this understanding. There are altitude ranges within Venus’s clouds in which temperature, pressure, particle size, and radiation appear to be within the limits of microbial life on Earth, and life cycles involving S- and Fe-based redox metabolism have been proposed. However, given the lack of a habitable surface reservoir, a long-term stable Venus aerobiosphere would require that the reproduction rate of the airborne microbes be faster than the settling rate of airborne microbes due to gravity, or eventually the population would be depleted; put another way, the mean generation time would need to exceed the mean residence time. This creates a joint constraint of aerosol dynamics, potential nutrient availability and energy influx, and bioenergetic costs such as desiccation and radiation damage. Even at an optimistic estimate of 75% H2SO4, Venus aerosol water activity (aw) is still ~0.02, far below the observed microbial growth limit of ~0.6. Long-term desiccation with brief spurts of repair and growth in response to transient water influx, such as from volcanism, is the most likely model for Earth-like life on Venus – a ‘desert bloom’ scenario. Several high-priority science goals – cloud aerosol composition, internal radiative flux, and aerosol residence time and circulation models – thus will also improve our understanding of Venus in an astrobiology context. In Earth’s troposphere, warm water clouds can carry 103 – 105 cells/mL, some metabolically active. However, Earth’s stratospheric sulfate aerosol layer may be a better analogue: supercooled sulfuric acidaerosols (acid weight fraction 0.6 – 0.85, 0.1 – 1 μm diameter, 0.1 – 1 cm-3) with little water activity, long residence times, high UV radiation, and only sporadic influx from surface particle sources. Though ‘hot spots’ can occur associated with tropospheric mixing, viable cells in stratospheric samples are rare (~102 cells/m3), and primarily inactive forms such as spores. It is not yet clear whether such bioaerosols are associated with sulfate aerosols or simply co-located, and reproduction in situ has not yet been observed. In this model of a sparse, largely dormant Venus ecosystem, a single transect on descent is likely to pass through a low-water, inactive region, missing potential signs of habitability or biosignatures. A targeted strategy would sample through an aerial region with some upwelling from surface sources, andtake multiple transects separated in time and space. This is compatible with other in situ science goals seeking to understand the dynamics and heterogeneities of Venus’s clouds.

Lower atmosphere↗

Tracking Aerosol Convection Interactions Experiment (TRACER) Field Campaign Report

Convective clouds serve a critical role in the Earth’s energy and water cycles through their transport of heat, moisture, momentum, and chemical species through the troposphere driving the global circulation (e.g., Hartmann et al. 1984, Del Genio et al. 2012, Su et al. 2014). On more local scales, convective clouds impact the atmospheric heating profile through diabatic heating effects, removal of water from the atmospheric column through precipitation, and conditioning of the local environment impacting further development of clouds (e.g., Sullivan and Voigt 2021). These critical roles underscore the importance of realistic representation of convective processes across scales of models from large-eddy simulation (LES), to convection-permitting models (CPM; e.g., Kendon et al. 2020, Marinescu et al. 2021), to numerical weather prediction (NWP) models used for operational weather forecasting, to Earth system models used to predict climate sensitivity (Sanderson et al. 2011, Sherwood et al. 2014, Tomassini et al. 2014, Zhao et al. 2016, Cronin et al. 2017). A key component of improving model representation of convective clouds is better quantification and parameterization of updraft microphysics and dynamics, including their interactions with the surrounding environment and storm organization (Bony et al. 2015, Hagos and Houze 2016, Donner et al. 2016, Morrison et al. 2020). Aerosol is an important environmental factor that could affect convective clouds and precipitation since cloud droplet and ice formation processes are initiated by it. Andrae et al. (2004) hypothesized that aerosols associated with increased biomass burning particles acting as cloud condensation nuclei (CCN) result in smaller and more monodisperse cloud droplets leading to suppression of warm rain formation, ultimately leading to more cloud water being lofted above the freezing level based on observations in the Amazon region. The subsequent increase in latent heat release increases the buoyancy of rising convective parcels invigorating the deep convection. This work was followed by a description of the theoretical basis for this “cold-phase invigoration” by Rosenfeld et al. (2008), who argued that it could have a significant effect for deep convective clouds with warm cloud-bases. Several modeling studies (e.g., Khain et al. 2005, 2009, van den Heever et al. 2006, Fan et al. 2007, 2009, 2012, Lee et al. 2008, Storer et al. 2010, Lebo et al. 2012, Storer and van den Heever 2013, Chen et al. 2020, Dagan et al. 2022) have investigated these aerosol-convection interactions and the environmental factors that influence their relative importance and magnitude. More recently, several studies have indicated that “warm-phase invigoration”, the enhancement of convection through condensational heating, also appears to play a role in enhancing both shallow cumuli (Seiki and Nakajima 2014, Saleeby et al 2015) and deeper tropical convection (Lebo and Seinfeld 2011, Khain et al. 2012, Sheffield et al 2015, Fan et al. 2018, Igel and van den Heever 2021), as well as Houston thunderstorms (Fan et al. 2007, 2020). However, still other studies have provided additional evidence of systematic biases in simulated convective outflow ice size distribution properties, which are consistent with a lack of poorly understood secondary ice production within convective updrafts (e.g., Fridlind et al. 2017). To help address these critical gaps in our understanding of cloud processes, aerosol processes and aerosol-cloud interactions, the Tracking Aerosol Convection Interactions Experiment was designed building upon efforts by the Aerosol, Cloud, Precipitation and Climate (ACPC) Initiative (http://acpcintiative.org/), a joint effort of the International Geosphere-Biosphere Programme (IGBP) and the World Climate Research Program (WCRP) that focused on resolving uncertainties in the interactions between aerosol and clouds towards better understanding the role that these interactions play in the climate system. The TRACER campaign was motivated by recommendations from a number of pilot studies undertaken by ACPC (van den Heever et al. 2017, Fridlind et al. 2019, Hu et al. 2019, Fan et al. 2020, Marinescu et al. 2021, Hernandez-Deckers et al. 2022) that pointed towards the southeastern Texas region as a locale where aerosol-convection interactions could be studied owing to the copious occurrence of isolated convection during the summer months accompanied by diverse and significant sources of aerosols from both anthropogenic and natural sources. The TRACER campaign began on 01 October 2021 and extended through 30 September 2022 with an intensive operational period (IOP) during June-September 2022. Three main sites (Table 1) were managed by the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility.

54 ENVIRONMENTAL SCIENCES↗