Search NASA⌕ Search

SEARCH · Search NASA

Results for “data dependencies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

CFDP Performance over Weather-dependent Ka-band Channel

This study presents an analysis of the delay performance of the CCSDS File Delivery Protocol (CFDP) over weather-dependent Ka-band channel. The Ka-band channel condition is determined by the strength of the atmospheric noise temperature, which is weather dependent. Noise temperature data collected from the Deep Space Network (DSN) Madrid site is used to characterize the correlations between good and bad channel states in a two-state Markov model. Specifically, the probability distribution of file delivery latency using the CFDP deferred Negative Acknowledgement (NAK) mode is derived and quantified. Deep space communication scenarios with different file sizes and bit error rates (BERs) are studied and compared. Furthermore, we also examine the sensitivity of our analysis with respect to different data sampling methods. Our analysis shows that while the weather-dependent channel only results in fairly small increases in the average number of CFDP retransmissions required, the maximum number of transmissions required to complete 99 percentile, on the other hand, is significantly larger for the weather-dependent channel due to the significant correlation of poor weather states.

deep space communications↗

Hourly rate data

The mass-dependent influx of meteors to the earth is discussed as the most important set of data for calculations of meteoroid hazard to spacecraft, and meteor distributions. The film recording of echo rates, and the echo analyzer are described along with the echo processor.

Southworth, R. B.↗

Artificial Neural Network Representation of Dynamic Criticality Excursion Experiment Data

This paper outlines time dependent considerations in applying the artificial neural network (ANN) paradigm to dynamic nuclear criticality excursion experiment data. The ANN amongst a variety of uses, can apply to function fitting of multiple input-multiple output data sets, pattern recognition, cluster analysis, and time series prediction. The ANN is a component of Machine Learning (ML) data analysis. The practical application of ML to criticality safety has been funded through the Y-12 Plant Directed Research and Demonstration (PDRD) program to support criticality safety and emergency planning efforts. The initial effort considered function fitting of criticality excursion data. Recent efforts successfully extended the ANN to criticality safety code validation. The initial ANN work applied to criticality excursions centered around multivariate function fitting of static (tabular) data taken from the French Consequences Radiologiques d'un Accident de Criticite (CRAC) and SILENE reactor campaigns. The former report (LeCorche) summarized important tabular data for the first 44 CRAC experiments. The initial ANN was trained to specific time-independent inputs, then applied to predict peak fission rate and total fissions for a wide variety of fissile solutions process conditions. This work extends that effort to apply the ANN paradigm to dynamic prediction of time-dependent criticality excursion experiment data. A dynamic criticality excursion in fissile solution represents a complex multiphysics phenomenon. Factors include among other things, coupled neutronic, multiphase fluid flow, temperature, pressure, acoustic shock, boiling heat transfer, reactivity feedback, and radiolytic gas considerations. There have been many efforts to model (over time) as coupled ordinary and (space) as partial differential equations (ODE, PDE). The ANN representation noted here does not rely on solving explicit ODE or PDEs. Rather the intent is to demonstrate that as a time series, the criticality excursion can be predicted by training specific ANN architectures to experimental input and output time series exclusively. The rationale for extending this work to the time-dependent regime is important in developing a 'criticality excursion emulator' solely on the basis of learning characteristics from experiment dynamic data. An emulator is different than a computer code simulator driven by the solution of ODEs and PDEs given select 'tuning parameters' that match outputs to experiments. A criticality excursion emulator, derived exclusively from an ANN or ML, could predict most likely excursion characteristics, trained from historic dynamic experiment data, presented with input values within the range of those experiments. The work noted shows that generic time-series ANN architectures can be satisfactorily applied to the prediction of dynamic, extremely chaotic criticality excursion power given an initial time dependent input series. In reality, an excursion emulator could be driven by user-supplied initial (t=0), time independent or constant values to generate time dependent outputs. Thus ongoing work includes developing a custom ANN such that initial dynamic conditions would be predicted. Those results then serve as inputs to a customized ANN architecture currently in development. (author)

42 ENGINEERING↗

Centrality and pseudorapidity dependence of the transverse energy density in p Pb collisions at s N N = 5.02 TeV

The almost hermetic coverage of the CMS detector is used to measure the distribution of transverse energy, E T , over 13.2 units of pseudorapidity, η, for p Pb collisions at a center-of-mass energy per nucleon pair of s NN = 5.02 TeV. The huge angular acceptance exploits the fact that the CASTOR calorimeter at -6.6 < η < -5.2 is effectively present on both sides of the colliding system because of a switch in the proton-going and lead-going beam directions. This wide acceptance enables the study of correlations between well-separated angular regions and makes the measurement a particularly powerful test of event generators. For minimum bias p Pb collisions the maximum value of dE T / d η is 22GeV, which implies an E T per participant nucleon pair comparable to that of peripheral PbPb collisions at s NN =2.76TeV. The increase of dE T / d η with centrality is much stronger for the lead-going side than for the proton-going side. The η dependence of dE T / d η is sensitive to the η range in which the centrality variable is defined. Several modern generators are compared to these results but none is able to capture all aspects of the η and centrality dependence of the data and the correlations observed between different η regions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Bayesian Structural Time Series for Behind-the-Meter Photovoltaic Disaggregation: Preprint

Distributed photovoltaic (PV) generation often occurs ``behind the meter": a grid operator can only observe the net load, which is the sum of the gross load and distributed PV generation. This lack of observability poses a challenge to system operation at both bulk level and distribution level. The lack of real-time or near-future disaggregated estimates of gross load and PV generation will lead to over scheduling of energy production and regulation reserves, reliability constraints violations, wear and tear of controller devices, and potentially cascading failures of a system. In this paper we propose the use of a Bayesian Structural Time Series (BSTS) model with local solar irradiance measurements to disaggregate the summed PV generation and gross load signals at a downstream measurement site. BSTSs are a highly expressive model class that blends classic time series models with the powerful Bayesian state space estimation framework. Disaggregation is done probabilistically, which automatically quantifies the uncertainties of the estimated PV generation and gross load consumption. Depending on the data availability in real-time, it can be used to disaggragate PV and gross load at customer site, or can be used at the feeder level. In this paper, we focus on solving the problem at feeder level. We compare the performance of a BSTS model as well as a handful of state-of-the-art methods on a Pecan Street AMI dataset, using the National Solar Radiation Database (NSRDB) to estimate local irradiance.

Bayesian structural time series↗

Bragg edge imaging (BEI) of B12W and M8N socket sections of the Arecibo telescope

From neutron user principal investigator: We kindly request the public release of three neutron imaging datasets through ONCat. All datasets were collected from two forensic specimens, B12W and M8N, sectioned from zinc-filled steel-wire sockets recovered from the collapsed Arecibo Telescope. The dataset titled “Neutron radiographs of B12W and M8N socket sections of the Arecibo telescope” contains normalized two-dimensional (2D) neutron radiographs of the specimens, showing the geometry and spatial distribution of the steel wires embedded within the zinc matrix, as well as internal features such as voids and cracks. The dataset titled “Neutron computed tomography of B12W and M8N socket sections of the Arecibo telescope” contains normalized 2D neutron projection images acquired over a range of specimen rotation angles for one selected region of each specimen. These projection images were used to reconstruct three-dimensional (3D) tomographic volumes that reveal the embedded-wire geometry and internal defects. The dataset titled “Bragg edge imaging (BEI) of B12W and M8N socket sections of the Arecibo telescope” contains six time-of-flight (TOF) neutron imaging datasets, three from each specimen, acquired at regions of interest selected based on the radiographs. The spatially resolved 2D TOF images show the zinc matrix and embedded steel wires, and the wavelength-dependent neutron transmission data were used to characterize crystallographic texture within the zinc. All components and their condition are in the public domain as they are the property of the National Science Foundation (NSF). The neutron imaging data, part geometries, and detailed forensic information have been widely published in the Arecibo Telescope Collapse Forensic Report by Thornton Tomasetti Engineers and others (NASA report and NASEM report).

Bilheux, Hassina↗

Joint Resource Modeling and Assessment for Hybrid Distributed Solar and Wind Systems

The inherent variability and uncertainty in distributed energy resources can presents myriad challenges to the planning and operations of power systems. These risks are poised to become larger as the penetration of renewable energy sources rises in the power generation mix. Hybrid solar-wind energy systems are able to mitigate some of these risks by their complementary resource availability. Surface solar and wind fields are coupled and correlated in both space and time. Appropriately estimating the hybrid solar wind energy system requires simulating the spatio-temporal structure of these fields that can be produced for each time horizon. We introduce a novel joint spatio-temporal stochastic differential equation (SPDE) approach that captures the spatio-temporal dynamics of solar and wind fields and their joint dependency over a domain for each time step. In the case study on Colorado, we consider nonstationary three-level hierarchical spatio temporal models for both hourly solar irradiance data and wind speed data in Colorado. Dependence between the solar irradiance data and wind speed data is captured by a shared spatio-temporal random effect. Our approach performs well in terms of the prediction score criterion.

joint modeling↗

A-site deficient perovskites in the SrO-ZrO{sub 2}-Nb{sub 2}O{sub 5} system: Composition dependent structures from neutron powder diffraction data

A series of A-site deficient perovskite-type phases was synthesised and characterised in the SrO-ZrO{sub 2}-Nb{sub 2}O{sub 5} system. The composition range was established as Sr{sub 0.70+x}Zr{sub 0.40+2x}Nb{sub 0.60-2x}O{sub 3}, {approx}0.02{<=}x{<=}0.30, and the resulting structures refined using high resolution neutron powder diffraction data. While structures in this composition range are closely related to the cubic perovskite parent, the symmetry for all investigated compositions is lowered to tetragonal or orthorhombic. For x<0.15 the resulting space group is tetragonal I4/mcm, for x>0.15 it is orthorhombic Pnma and for x=0.15 two phases co-exist, in space groups I4/mcm and Pnma. - Graphical abstract: Structured diffuse intensity indicating additional short range order in the defect perovskite Sr{sub 0.72}Zr{sub 0.44}Nb{sub 0.56}O{sub 3}. Highlights: Black-Right-Pointing-Pointer A-site deficient perovskites synthesised in Sr{sub 0.70+x}Zr{sub 0.40+2x}Nb{sub 0.60-2x}O{sub 3}, {approx}0.02 {<=}x{<=}0.30. Black-Right-Pointing-Pointer Space groups established from X-ray, electron and neutron powder diffraction. Black-Right-Pointing-Pointer Structures refined and phase transition established from neutron diffraction data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Combination of grazing incidence x-ray fluorescence with x-ray reflectivity in one table-top spectrometer for improved characterization of thin layer and implants on/in silicon wafers

As Grazing Incidence X-ray Fluorescence (GIXRF) analysis does not provide unambiguous results for the characterization of nanometre layers as well as nanometre depth profiles of implants in silicon wafers by its own, the approach of providing additional information using the signal from X-ray Reflectivity (XRR) was tested. As GIXRF already uses an X-ray beam impinging under grazing incidence and the variation of the angle of incidence, a GIXRF spectrometer was adapted with an XRR unit to obtain data from the angle dependent fluorescence radiation as well as data from the reflected beam. A θ-2θ goniometer was simulated by combining a translation and tilt movement of a Silicon Drift detector, which allows detecting the reflected beam over 5 orders of magnitude. HfO{sub 2} layers as well as As implants in Silicon wafers in the nanometre range were characterized using this new setup. A just recently published combined evaluation approach was used for data evaluation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

On data set tensions and signatures of new cosmological physics

ABSTRACT Can new cosmic physics be uncovered through tensions amongst data sets? Tensions in parameter determinations amongst different types of cosmological observation, especially the ‘Hubble tension’ between probes of the expansion rate, have been invoked as possible indicators of new physics, requiring extension of the ΛCDM paradigm to resolve. Within a fully Bayesian framework, we show that the standard tension metric gives only part of the updating of model probabilities, supplying a data co-dependence term that must be combined with the Bayes factors of individual data sets. This shows that, on its own, a reduction of data set tension under an extension to ΛCDM is insufficient to demonstrate that the extended model is favoured. Any analysis that claims evidence for new physics solely on the basis of alleviating data set tensions should be considered incomplete and suspect. We describe the implications of our results for the interpretation of the Hubble tension.

Cortês, Marina (ORCID:0000000304853767)↗

Measurement of the U 235 ( n , f ) prompt fission neutron spectrum from 10 keV to 10 MeV induced by neutrons of energy from 1 MeV to 20 MeV

The characterization of fission-driven nuclear systems primarily relies on calculations of neutron-induced chain reactions, and these calculations require evaluated nuclear data as input. Calculation accuracy heavily depends on input nuclear data evaluation accuracy, and thus high precision on the experimental input to the nuclear data evaluation is essential for fundamental quantities like the energy spectrum of neutrons emitted from neutron-induced fission (i.e., the prompt fission neutron spectrum, PFNS). Despite decades of measurement efforts, prior to the measurements described in this work there were only three literature data sets for the 235 U(n,f) PFNS at incident neutron energies above 1.0 MeV considered reliable for inclusion in nuclear data evaluations and no reliable data sets above 3.0 MeV incident neutron energy. In this work we report on new measurements of the 235 U(n,f) PFNS spanning a grid of 1.0–20.0 MeV in incident neutron energy and 0.01–10.0 MeV in outgoing (PFNS) neutron energy. These measurements were carried out at the Weapons Neutron Research facility at the Los Alamos Neutron Science Center and used a multifoil parallel-plate avalanche counter target with both a Li-glass and a liquid scintillator detector array in separate experiments to span the quoted outgoing neutron energy ranges. The PFNS results are shown in terms of the energy spectra themselves as well as the average PFNS energy $(\langle{E}\rangle)$ and ratios of $\langle{E}\rangle$ at forward and backward angles. Here, the results are compared with literature data and selected nuclear data evaluations. Generally, the data agree with the ENDF/B-VIII.0 evaluation below 5.0-MeV incident neutron energy and more closely with the JEFF-3.3 evaluation above 5.0 MeV, though no evaluations considered for comparison in this work agree with the data across all of the incident and outgoing neutron energies shown, especially in regions where the third-chance fission process becomes available. Additionally, we show a ratio of the present PFNS results for 235 U(n, f) with a recent and highly correlated experiment to measure the 239 Pu(n, f) PFNS at the same experimental facility and with nearly identical equipment and analysis procedures. Many observations reported in this work are the first of their kind and represent significant advancements for knowledge of the 235 U(n, f) PFNS.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Evaluating the Accuracy of Various Irradiance Models in Detecting Soiling of Irradiance Sensors

We evaluate the feasibility of using various clear-sky models or purchased satellite data for estimating the soiling of a reference cell irradiance sensor. We find results to be more accurate for models that consider local meteorological conditions. We conclude that given the data sets considered, and depending on the requirements of the data analyst, choosing to use purchased satellite irradiance data from Solargis to estimate the soiling of a reference cell sensor tends to yield more accurate results, although there are instances where a clear-sky model performs better. The SOLIS clear-sky model in PVLIB with variable P wat provided useful soiling results, implying that the general method of using a clear-sky model with local meteorological data may provide a low-cost tool for detecting soiling of irradiance sensors.

14 SOLAR ENERGY↗

Molecular radiotherapy: The NUKFIT software for calculating the time-integrated activity coefficient

Purpose: Calculation of the time-integrated activity coefficient (residence time) is a crucial step in dosimetry for molecular radiotherapy. However, available software is deficient in that it is either not tailored for the use in molecular radiotherapy and/or does not include all required estimation methods. The aim of this work was therefore the development and programming of an algorithm which allows for an objective and reproducible determination of the time-integrated activity coefficient and its standard error.Methods: The algorithm includes the selection of a set of fitting functions from predefined sums of exponentials and the choice of an error model for the used data. To estimate the values of the adjustable parameters an objective function, depending on the data, the parameters of the error model, the fitting function and (if required and available) Bayesian information, is minimized. To increase reproducibility and user-friendliness the starting values are automatically determined using a combination of curve stripping and random search. Visual inspection, the coefficient of determination, the standard error of the fitted parameters, and the correlation matrix are provided to evaluate the quality of the fit. The functions which are most supported by the data are determined using the corrected Akaike information criterion. The time-integrated activity coefficient is estimated by analytically integrating the fitted functions. Its standard error is determined assuming Gaussian error propagation. The software was implemented using MATLAB.Results: To validate the proper implementation of the objective function and the fit functions, the results of NUKFIT and SAAM numerical, a commercially available software tool, were compared. The automatic search for starting values was successfully tested for reproducibility. The quality criteria applied in conjunction with the Akaike information criterion allowed the selection of suitable functions. Function fit parameters and their standard error estimated by using SAAM numerical and NUKFIT showed differences of <1%. The differences for the time-integrated activity coefficients were also <1% (standard error between 0.4% and 3%). In general, the application of the software is user-friendly and the results are mathematically correct and reproducible. An application of NUKFIT is presented for three different clinical examples.Conclusions: The software tool with its underlying methodology can be employed to objectively and reproducibly estimate the time integrated activity coefficient and its standard error for most time activity data in molecular radiotherapy.

61 RADIATION PROTECTION AND DOSIMETRY↗