Search NASA⌕ Search

SEARCH · Search NASA

Results for “data rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Laboratory Characterization and Modeling of a Near-Infrared Enhanced Photomultiplier Tube

The photon-starved channel for optical communications from deep space requires the development of detector technology that can achieve photon-counting sensitivities with high bandwidth. In this article, a near-infrared enhanced photomultiplier tube (PMT) with a quantum e.ciency of 0.08 at a 1.06- m wavelength is characterized in the laboratory. A Polya distribution model is used to compute the probability distribution function of the emitted secondary photoelectrons from the PMT. The model is compared with measured pulse-height distributions with reasonable agreement. The model accounts for realistic device parameters, such as the individual dynode stage gains and a shape parameter that is representative of the spatial uniformity of response across the photocathode and dynodes. Bit-error rate (BER) measurements also are presented for 4- and 8-pulse-position modulation (PPM) modulation schemes with data rates of 20 to 30 Mb/s. A BER of 10-2 is obtained for a mean of 8 detected photons.

Biswas, A.↗
NASA NTRS2018

NASA 26 GHz Polar Subnet in 2020+

The next generation Earth observing satellites will face challenges in supporting high rate space communications from the increasingly sophisticated instruments. Emerging applications will need space-to-ground links with data rates forecasted to be in the 1-20 Gbps range. To meet these challenges, NASA is designing and integrating a 26 GHz Polar Subnet to support space communication needs in 2020 and beyond. This paper describes the current effort of the Space Communications and Navigation Program's Near Earth Network (NEN), managed out of Goddard Space Flight Facility (GSFC), to deploy a 26 GHz Polar Subnet including the implementation, topology, capabilities, architecture design, operations and key design trades.

Baldwin, Philip↗
NASA NTRS1997

The Galileo Spacecraft: A Communications Legacy for Future Space Flight

The Galileo mission to Jupiter has implemented a wide range of telecommunication improvements in response to the loss of it's high gain antenna. Among the communications enhancements that have been made are the use of advanced compression techniques, packetized telemetry, new error correcting codes and algorithms, more efficient modulation, variable transmission data rates, routine ground antenna arraying (even between continents,) extremely sensitive ground receivers, and non-real-time automated data reconstruction. This telecommunications legacy of Galileo will aid in our abillity to conduct a meaningful exploration of the solar system, and beyond, at a reasonable cost.

Galileo↗
NASA NTRS2012

Evaluation of Delamination Growth Characterization Methods Under Mode I Fatigue Loading

Reliable delamination characterization data for laminated composites are needed for input to analytical models of structures to predict delamination. The double-cantilevered beam (DCB) specimen is used with laminated composites to measure fracture toughness, G(sub Ic), delamination onset strain energy release rate, and growth rate data under cyclic loading. In the current study, DCB specimens of IM7/8552 graphite/epoxy supplied by two different manufacturers were tested in static and fatigue to compare the measured characterization data from the two sources, and to evaluate a proposed ASTM standard for generating Paris Law equations. Static results were used to generate compliance calibration constants for the fatigue data, and a delamination resistance curve, G(sub IR), which was used to determine the effects of fiber-bridging on delamination growth. Specimens were tested in fatigue at a cyclic G(sub Imax) level equal to 50, 40 or 30% of G(sub Ic), to determine a delamination onset curve and delamination growth rate. The delamination onset curve equations had similar exponents and the same trends. Delamination growth rate was calculated by fitting a Paris Law to the da/dN versus G(sub Imax) data. Both a 2-point and a 7-point data reduction method were used and the Paris Law equations were compared. To determine the effects of fiber-bridging, growth rate results were normalized by the delamination resistance curve for each material and compared to the non-normalized results. Paris Law exponents were found to decrease by 31% to 37% due to normalizing the growth data. Normalizing the data also greatly reduced the amount of scatter between the different specimens. Visual data records from the fatigue testing were used to calculate individual compliance calibration constants from the fatigue data for some of the specimens. The resulting da/dN versus G(sub Imax) plots showed much improved repeatability between specimens. Gretchen

Murri, Gretchen B.↗
NASA NTRS1972

Optical modulator system

The fabrication, test, and delivery of an optical modulator system which will operate with a mode-locked Nd:YAG laser indicating at either 1.06 or 0.53 micrometers is discussed. The delivered hardware operates at data rates up to 400 Mbps and includes a 0.53 micrometer electrooptic modulator, a 1.06 micrometer electrooptic modulator with power supply and signal processing electronics with power supply. The modulators contain solid state drivers which accept digital signals with MECL logic levels, temperature controllers to maintain a stable thermal environment for the modulator crystals, and automatic electronic compensation to maximize the extinction ratio. The modulators use two lithium tantalate crystals cascaded in a double pass configuration. The signal processing electronics include encoding electronics which are capable of digitizing analog signals between the limit of + or - 0.75 volts at a maximum rate of 80 megasamples per second with 5 bit resolution. The digital samples are serialized and made available as a 400 Mbps serial NRZ data source for the modulators. A pseudorandom (PN) generator is also included in the signal processing electronics. This data source generates PN sequences with lengths between 31 bits and 32,767 bits in a serial NRZ format at rates up to 400 Mbps.

Brand, J.↗
NASA NTRS1972

Interplanetary cosmic dust flux

Pioneer 8 and 9 measured cosmic dust flux rate data are in agreement with astronomy theory, zodiacal light measurements, and ground-based observations, but differ markedly from the high flux rates deduced from earlier in situ measurements. As many as seven orders-of-magnitude separate the small particle end of the high and low flux curves. It was concluded that the data from the multicoincidence cosmic dust sensors have not only measured very low flux for micrometeorites, which is in keeping with astronomy theory, but have also shown how a high flux theory may be based on faulty data.

Berg, O. E.↗
NASA NTRS1997

Comprehensive evaluation of attitude and orbit estimation using real earth magnetic field data

A single, augmented extended Kalman filter (EKF) which simultaneously and autonomously estimates spacecraft attitude and orbit was developed and tested with simulated and real magnetometer and rate data. Since the earth's magnetic field is a function of time and position, and since time is accurately known, the differences between the computed and measured magnetic field components, as measured by the magnetometers throughout the entire spacecraft's orbit, are a function of orbit and attitude errors. These differences can be used to estimate the orbit and attitude. The test results of the EKF with magnetometer and gyro data from three NASA satellites are presented and evaluated.

Deutschmann, Julie↗
NASA NTRS1969

DRSS communication considerations for manned space flight

A lower and an upper bound or manned space flight requirements for a data relay satellite system (DRSS) in the 1975-1980 time period are described. In all cases, the most stringent requirement is an intersatellite link to provide wideband information transfer from an overseas DRS to the Continental United States. A parametric communication analysis is made as a function of varying frequency and antenna aperture. The desirability of using a VHF frequency band for low data rates and voice relay and the requirement for frequencies of 8 and 16 GHz for video and wideband digital data relay are shown.

Peltzer, K. E.↗
NASA NTRS1989

The mechanical properties of fluoride salts at elevated temperatures

The deformation behavior of CaF2 and LiF single crystals compressed in the 111 and the 100 line directions, respectively, are compared with the mechanical properties of polycrystalline LiF-22 (mol pct) CaF2 eutectic mixture in the temperature range 300 to 1275 K for strain rates varying between 7 x 10 to the -7th and 0.2/s. The true stress-strain curves for the single crystals were found to exhibit three stages in an intermediate range of temperatures and strain rates, whereas those for the eutectic showed negative work-hardening rates after a maximum stress. The true stress-strain rate data for CaF2 and LiF-22 CaF2 could be represented by a power-law relation with the strain rate sensitivities lying between 0.05 and 0.2 for both materials. A similar relation was found to be unsatisfactory in the case of LiF.

Raj, S. V.↗
NASA NTRS1989

A tone-aided dual vestigial sideband system for digital communications on fading channels

A spectrally efficient tone-aided dual vestigial sideband (TA/DVSB) system for digital data communications on fading channels is presented and described analytically. This PSK (phase-shift-keying) system incorporates a feed-forward, tone-aided demodulation technique to compensate for Doppler frequency shift and channel- induced, multipath fading. In contrast to other tone-in-band-type systems, receiver synchronization is derived from the complete data VSBs. Simulation results for the Rician fading channel are presented. These results demonstrate the receiver's ability to mitigate performance degradation due to fading and to obtain proper data carrier synchronization, suggesting that the proposed TA/DVSB system has promise for this application. Simulated BER (bit-error rate) data indicate that the TA/DVSB system effectively alleviates the channel distortions of the land mobile satellite application.

Hladik, Stephen M.↗
NASA NTRS1991

The development of the EOS data and information system

The architecture of the Earth Observing System (EOS), a major component of NASA's contribution to the U.S. Global Change Research Program, is described with emphasis on its development strategy. It is noted that the EOS is comprised of a scientific research program, a space measurement system, and an EOS Data and Information System (EOSDIS). Details are presented concerning the EOS program and its candidate instruments. Major components of EOS include Version 0 (V0) built on existing Distributed Active Archive Centers (DAACs), the EOSDIS core system (ECS), DAAC-unique functions, science computing facilities (SCF), and independent verification validation of the ECS. Requirements for EODIS are also reviewed noting that, among other requirements, it must keep up with an orbital average data rate of more than 30 Mbps as well as store, distribute, and manage information about tens of Petabytes of data during and after the 15-year mission.

Taylor, Thomas D.↗
NASA NTRS1995

Noncausal telemetry data recovery techniques

Cost efficiency is becoming a major driver in future space missions. Because of the constraints on total cost, including design, implementation, and operation, future spacecraft are limited in terms of their size power and complexity. Consequently, it is expected that future missions will operate on marginal space-to-ground communication links that, in turn, can pose an additional risk on the successful scientific data return of these missions. For low data-rate and low downlink-margin missions, the buffering of the telemetry signal for further signal processing to improve data return is a possible strategy; it has been adopted for the Galileo S-band mission. This article describes techniques used for postprocessing of buffered telemetry signal segments (called gaps) to recover data lost during acquisition and resynchronization. Two methods, one for a closed-loop and the other one for an open-loop configuration, are discussed in this article. Both of them can be used in either forward or backward processing of signal segments, depending on where a gap is specifically situated in a pass.

Tsou, H.↗
NASA NTRS2005

Optimizing Parameters for Deep-Space Optical Communication

A paper discusses the optimization of the parameters of a high-rate, deep-space optical communication link that utilizes pulse-position modulation (PPM) and an error-correcting code (ECC). The parameters in question include the PPM order (number of pulse time slots in one symbol period), the ECC rate, and the uncoded symbol error rate. In simple terms, the optimization problem is to choose the combination of these parameters that maximizes the throughput data rate at a given bit-error-rate (BER), subject to several constraints, including limits on the average and peak power and possibly a limit on the uncoded symbol error rate. This is a complex, multidimensional optimization problem, the solution of which involves computation of channel capacities for various combinations of the parameters. The paper presents extensive theoretical analyses and numerical predictions that elucidate the many facets of the optimization problem. It shows how a nearly optimum solution can be obtained by choosing the optimum PPM order for the desired number of bits per slot and concatenating the PPM mapping with an error-correction code so that the decoded bits satisfy some BER threshold.

Moison, Bruce↗
NASA NTRS1982

Image processing via VLSI: A concept paper

Implementing specific image processing algorithms via very large scale integrated systems offers a potent solution to the problem of handling high data rates. Two algorithms stand out as being particularly critical -- geometric map transformation and filtering or correlation. These two functions form the basis for data calibration, registration and mosaicking. VLSI presents itself as an inexpensive ancillary function to be added to almost any general purpose computer and if the geometry and filter algorithms are implemented in VLSI, the processing rate bottleneck would be significantly relieved. A set of image processing functions that limit present systems to deal with future throughput needs, translates these functions to algorithms, implements via VLSI technology and interfaces the hardware to a general purpose digital computer is developed.

Nathan, R.↗
NASA NTRS1979

Polar clearing in the Venus clouds observed from the Pioneer Orbiter

High data rate, high resolution observations made by the Pioneer Venus 1 Orbiter of Venus clouds in the polar region are reported. Data obtained by the Pioneer IR radiometer reveal the presence of a localized, very warm (260 K) feature at about 80 deg N, 359 deg E, indicating a cloud height differential of about 15 km between the depressed, but not totally absent, cloud level indicated by the temperature peak and the surrounding cold zones. The observations are considered to constitute new evidence for the presence of strong atmospheric subsidence near the poles, fitting a model of vortex-type polar circulation. Implications of the observations for the single cell model of the Venus stratosphere are noted.

Taylor, F. W.↗
NASA NTRS1981

Shuttle /STS-1/ entry trajectory reconstruction

The methods and data used to reconstruct the Shuttle entry trajectory aerodynamics from 180 km to landing are reviewed. Onboard accelerometer and gyro measurements are used with a weighted least squares filter along with ground tracking data to provide the evolving spacecraft state. The software development is described, noting that computations include linear acceleration and angular rate data, aerodynamic coefficient, and inertial measurement units, sampled at 170 Hz. Ground tracking data was gathered on S- and C-bands; Guam data is considered critical as it was taken during the blackout at the beginning of entry. The generation of a best estimate trajectory, combining flight and ground data, yields inplane parameters of altitude, flight path angle, and velocity for comparison with navigational instrumentation. Predicted lift/drag ratios were found to be accurate from Mach 1-25, and up to 23% low below Mach 1.

Compton, H. R.↗
NASA NTRS1981

The Dynamics Explorer Langmuir probe instrument

The Dynamics Explorer Langmuir probe instrument (DE-LANG), a spare unit from the Pioneer Venus mission that has been modified to work with the DE spacecraft, is described. Two independent sensors are connected to individual adaptive sweep voltage circuits that continuously track the changing electron temperature and spacecraft potential while autoranging electrometers adjust their gain in response to the changing plasma density. The control signals used in achieving this automatic tracking provide a continuous monitor of the ionospheric parameters without telemetering each volt-ampere curve. In addition, internal data storage circuits permit high-resolution, high-data-rate sampling of selected volt-ampere curves for transmission to the ground to verify or correct the inflight processed data.

Krehbiel, J. P.↗
NASA NTRS1982

Ship navigation using Navstar GPS - An application study

Ocean current measurement applications in physical oceanography require knowledge of inertial ship velocity to a precision of 1-2 cm/sec over a typical five minute averaging interval. The navigation accuracy must be commensurate with data precision obtainable from ship borne acoustic profilers used in sensing ocean currents. The Navstar Global Positioning System is viewed as a step in user technological simplification, extension in coverage availability, and enhancement in performance accuracy as well as reliability over the existing systems, namely, Loran-C, Transit, and Omega. Error analyses have shown the possibility of attaining the 1-2 cm/sec accuracy during active GPS coverage at a data rate of four position fixes per minute under varying sea-states. This paper is intended to present results of data validation exercises leading to design of an experiment at sea for deployment of both a GPS y-set and a direct Doppler measurement system as the autonomous navigation system used in conjunction with an acoustic Doppler as the sensor for ocean current measurement.

Mohan, S. N.↗