Search NASA⌕ Search

SEARCH · Search NASA

Results for “dislocation density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

In situ high-energy X-ray diffraction mapping of Lüders band propagation in medium-Mn transformation-induced plasticity steels

Two-dimensional distributions of microstructural characteristics of austenite (γ) around the Lüders band in medium-Mn transformation-induced plasticity (TRIP) steel were revealed by in situ high-energy X-ray diffraction. Lüders band propagation leads to significant changes in the volume fraction and lattice strains of austenite. The evolution of the lattice strain of γ-311 accords well with the true yield behavior model and is used to estimate the angle of the Lüders band front with respect to the tensile axis. The modified Williamson-Hall analysis shows that the dislocation density in austenite increased from 7 × 10 14 m -2 to 1.5 × 10 15 m -2 after Lüders band propagation. This in situ high-energy X-ray diffraction study unravels two-dimensional distribution of microstructural evolution during Lüders band propagation in medium-Mn TRIP steels.

36 MATERIALS SCIENCE↗

Resolving crystallographic geometrically necessary dislocations in three dimensions in a hexagonal close packed titanium alloy

Abstract Geometrically necessary dislocation (GND) content is measured from mm 3 -scaled Ti7Al three-dimensional (3D) microstructural data using a theory extended for hexagonal close packed crystals, which accounts for basal, prismatic and pyramidal ⟨ c + a ⟩ type dislocation content. The Ti7Al samples have been mechanically pre-strained to two different strain levels, and will then be strained along the same axis in uniaxial tension during simulation. Both inter- and intragranular GNDs across the microstructures have been characterized, with a large contribution of pyramidal ⟨ c + a ⟩ GNDs, consistent with the relative slip activity involved in pre-straining. The spatially resolved crystallographic GND distributions within the 3D microstructures are used to instantiate a microstructure model for forward modeling deformation simulations by a dislocation density hardening elasto-viscoplastic fast Fourier transform framework. Coarsening the voxel resolution during the initial microstructure construction procedure is shown to strongly impact both the magnitude and spatial distribution of the GNDs and in turn the forward deformation response of the pre-strained material. This study indicates that the voxel resolution desired when transferring from measured to model microstructures need not only be proportionally scaled with the microstructure but also sufficiently fine to capture the subgranular orientation gradients that may already be present in the material.

Materials Science↗

Investigation of plastic yielding in near-micrometer grain size aluminum using synchrotron microdiffraction

The onset of plastic yielding has been studied in samples of aluminum with nearmicrometer average grain size using in situ tensile loading combined with synchrotron radiation. A white-beam Laue 3D micro-diffraction technique was used allowing the collection of diffraction signal from a volume with a resolution of 1 μm in all three dimensions. The orientation data obtained from the micro-diffraction are used to estimate the local variation in geometrically necessary dislocation density, and correction factors are suggested for voxels where neighbors are missing in either one or two dimensions. The results demonstrate a considerable heterogeneity in deformation in the early stages of plastic deformation.

Zhang, C L↗

Lattice-level observation of the elastic-to-plastic relaxation process with subnanosecond resolution in shock-compressed Ta using time-resolved in situ Laue diffraction

We report direct lattice level measurements of plastic relaxation kinetics through time-resolved, in-situ Laue diffraction of shock-compressed single-crystal [001] Ta at pressures of 27-210 GPa. For a 50 GPa shock, a range of shear strains is observed extending up to the uniaxial limit for early data points (<0.6 ns) and the average shear strain relaxes to a near steady state over ~1 ns. For 80 and 125 GPa shocks, the measured shear strains are fully relaxed already at 200 ps, consistent with rapid relaxation associated with the predicted threshold for homogeneous nucleation of dislocations occurring at shock pressure ~65 GPa. The relaxation rate and shear stresses are used to estimate the dislocation density and these quantities are compared to the Livermore Multiscale Strength model as well as various molecular dynamics simulations.

36 MATERIALS SCIENCE↗

Crystallization Dynamics of a Single Layer Complex Plasma

We report a series of complex (dusty) plasma experiments, aimed at the study of the detailed time evolution of the recrystallization process following a rapid quench of a two-dimensional dust liquid. The experiments were accompanied by large-scale (million-particle) molecular dynamics simulations, assuming Yukawa-type interparticle interaction. Both experiment and simulation show a {proportional_to}t{sup {alpha}} (power-law) dependence of the linear crystallite domain size as measured by the bond-order correlation length, translational correlation length, dislocation (defect) density, and a direct size measurement algorithm. The results show two stages of order formation. On short time scales, individual particle motion dominates; this is a fast process characterized by {alpha}=0.93{+-}0.1. At longer time scales, small crystallites undergo collective rearrangement, merging into bigger ones, resulting in a smaller exponent {alpha}=0.38{+-}0.06.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Unraveling the discontinuous plastic flow of a Co-Cr-Fe-Ni-Mo multiprincipal-element alloy at deep cryogenic temperatures

We report an analysis of the discontinuous plastic flow of a multiprincipal-element alloy, Co 17.5 Cr 12.5 Fe 55 Ni 10 Mo 5 (atomic percent, at. %), in the temperature range of 0.5–4.2 K showing serrated deformation curves. Using the analytical techniques, we studied the statistics of the stress drops associated with the unstable plastic flow. The analysis showed that the complexity and heterogeneity of a discontinuous plastic flow were reduced when the temperature was lowered. This behavior was associated with the effects of dynamic recovery and adiabatic heating on the dislocation-density evolution.

36 MATERIALS SCIENCE↗

Building a Six-Junction Inverted Metamorphic Concentrator Solar Cell

We propose practical six-junction (6J) inverted metamorphic multijunction (IMM) concentrator solar cell designs with the potential to exceed 50% efficiency using moderately high quality junction materials. We demonstrate the top three junctions and their monolithic integration lattice matched to GaAs using 2.1-eV AlGaInP, 1.7-eV AlGaAs or GaInAsP, and 1.4-eV GaAs with external radiative efficiencies >0.1%. We demonstrate tunnel junctions with peak tunneling current >400 A/cm 2 that are transparent to <2.1-eV light. We compare the bottom three GaInAs(p) junctions with bandgaps of 1.2, 1.0, and 0.7 eV grown on InP and transparent metamorphic grades with low dislocation densities. The solution to an integration challenge resulting from Zn diffusion in the GaAs junction is illustrated in a five-junction IMM. Excellent 1-sun performance is demonstrated in a complete 6J IMM device with VOC = 5.15 V, and a promising pathway toward >50% efficiency at high concentrations is presented.

14 SOLAR ENERGY↗

Investigation of Rear-Emitter GaAs 0.75 P 0.25 Top Cells for Application to III–V/Si Tandem Photovoltaics

A rear-emitter (rear-junction) n-on-p+ device design was investigated for use in metamorphic monolithic III-V/Si tandem solar cells as an alternative to the traditional front-emitter (front-junction) n+-on-p design for potentially greater resistance to threading dislocation-induced performance degradation. A comparison of MOCVD-grown rearversus front-emitter 1.7-eV bandgap GaAs 0.75 P 0.25 top cell isotypes demonstrated as 30-mV advantage in WOC for the rear-emitter design. Here, this reduction in WOC was determined to be nearly equally caused by a reduction in junction recombination current as well as reduced reverse saturation current from improved quasi-neutral region transport. These results suggest that the rear-emitter design may indeed be a promising pathway for application to metamorphic cells, including III-V/Si tandems, where achieving maximum voltage output is often hindered by elevated dislocation densities. However, further optimization of short-circuit current collection is needed to overcome suboptimal collection probability profiles that could limit the efficacy of such structures.

14 SOLAR ENERGY↗

High Efficiency 6-Junction Solar Cells for the Global and Direct Spectra

We show 6-junction inverted metamorphic solar cells with high efficiencies under both the global and direct spectrum, and discuss improvements to device components. High voltage AlGaInP subcells are demonstrated on GaAs substrates miscut 2° towards (111)B by using Sb surfactant to reduce atomic ordering. This miscut enables high voltage and low dislocation density GaInAs subcells by using atomically-ordered GaInP-based graded buffers. One-sun efficiencies of 39.2 ± 1.3% under the global spectrum and 39.4 ± 1.1% direct spectrum have been demonstrated by using these high voltage subcell components. For high efficiency under the concentrated direct spectrum, low resistance is also necessary, which requires a challenging and nonintuitive optimization of tunnel junctions and heterobarriers. Increasing the thickness of a (Al)GaInAs spacer layer between the back surface fields (BSF) and tunnel junctions (TJ) of latticemismatched subcells reduces nonlinear resistance, which implies a detrimental interaction between the BSF and TJ. Concentrator devices with optimized spacer layers show reduced effective resistance and maintain fill factor > 75% at 1100 suns. Device efficiencies under the concentrated direct spectrum peak at 47.1 ± 3.2% at 143 suns.

41 EE - Solar Energy Technologies Office (EE-4S)↗

Towards a III-V Solar Cell with a Metamorphic Graded Buffer Directly Grown on V-Groove Si Substrates

V-groove Si substrates offer a promising route for the direct growth of III-V solar cells on low-cost, photovoltaic-grade Si. In this work, we develop a method for coalescing GaP nucleated on V-groove substrates into thin films suitable for the growth of III-V solar cells. We demonstrate the ability to suppress nucleation-related defects by modifying the V-groove substrate to cover the (0 0 1)-oriented Si V-groove tops with SiN x . A threading dislocation density (TDD) of 5 × 10 7 cm -2 was measured with electron channeling contrast imaging. Continuing work will focus on further reducing the TDD and the growth of a GaAs solar cell on a GaP on V-groove Si template.

41 EE - Solar Energy Technologies Office (EE-4S)↗

Effect of Strain on the Resistivity and Thermal Conductivity of High Purity Niobium

High purity niobium (Nb) is a technologically important material for large-scale accelerator and nano-scale quantum computing applications in microwave frequency range. The high thermal conductivity and low resistivity of Nb are critical to the high performance at temperature range of 0.01–4.0 K. The presence of interstitials such as O, N, H, and C act as scattering centers and alter the mean free path, reducing resistivity and thermal conductivity, and contributing significantly to Nb's thermal performance for temperatures of 2.0 K and above. The residual resistivity ratio (RRR), defined as the ratio of the normal state resistivity at 300 K to that at 4.2 K (Nb, T c = 9.2 K), is an accepted direct estimate of the impurity content of fully recrystallized Nb. Complete re-crystallization of Nb is challenging unless very high temperatures are employed, which is often impractical, hence, in practice, dislocation and dislocation structures impact the thermal performance of Nb due to strong phonon scattering contributions. Furthermore, this paper reports on the degradation of thermal conductivity and RRR of high purity Nb large grain, single crystal with fixed impurity, varying strain, and dislocation content levels. Experimental thermal conductivity data fits the Boltzmann transport equation incorporating dislocation density.

36 MATERIALS SCIENCE↗

Effects of Heat Treatment on Microstructure, Thermal Transport and Stability in SRF Niobium

Efficient heat transfer and thermal stability are critical for preventing thermal quench and ensuring the high performance and reliability of superconducting radiofrequency (SRF) cavities, especially under high RF fields. In this article, we investigate thermal conductivity and heat capacity of high-purity cold-worked niobium used in SRF applications, with a particular focus on the effects of high-temperature heat treatments. Our measurements reveal a pronounced sensitivity of thermal transport and thermodynamic properties to the underlying microstructure such as grain size and dislocation density. The results show the critical role of controlled heat treatment processes in optimizing the thermal performance of SRF niobium, providing valuable insights for improving cavity fabrication and processing.

36 MATERIALS SCIENCE↗

Systematic Study on Aluminum Composition Nonuniformity in Aluminum Gallium Nitride Metal–Semiconductor–Metal Photodetectors

Here, the influence of aluminum composition (Al%) nonuniformity on AlGaN metal–semiconductor–metal photodetectors was thoroughly studied on a device level. The Al% fluctuation was precisely measured by x-ray photoelectron spectroscopy and mapped by energy dispersive spectrometry; the dislocation density was investigated by x-ray diffraction rocking curve. Both theoretical simulation and experimental testing showed a significant difference in the responsivity, dark current, and decay time in the device with different Al%. The Al% fluctuation is also a likely cause of the long decay time of the device.

36 MATERIALS SCIENCE↗

The challenge of acquiring a satisfactory EBSD result of CWSR Zircaloy-4 cladding tube

This article presents a methodology combining SEM, EDS, conventional EBSD, and transmission-EBSD to analyse a recrystallised Zircaloy-4 sheet and cold-worked stress-relieved (CWSR) Zircaloy-4 cladding in unprecedented detail. Second-phase precipitates (SPPs) in Zircaloy-4 specimens were revealed after chemical polishing using a solution containing hydrofluoric acid (HF). Pitting corrosion of Zircaloy-4 specimens was revealed after electropolishing using an electrolyte containing HClO4. A zirconium coupon without SPPs was used to confirm the chemical response of SPPs on surface morphology. Intrinsic features of cold-worked Zircaloy-4 such as relatively small grain sizes, high dislocation density, and complex microstructure make it significantly more difficult to collect excellent EBSD results compared to recrystallised Zircaloy-4. The fine hydride structure of as-hydrided CWSR Zircaloy-4 cladding further increases the level of challenge on EBSD analysis.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Synthesis and characterization of electron beam irradiation-induced damage in polycrystalline metal thin films

High-energy physics research, industrial sterilizing, and material processing depend extensively on electron beam accelerators. Exit windows are crucial components of such electron accelerator systems, maintaining vacuum integrity inside the machine while providing mechanical strength, thermal stability, and radiation resistance at the beam-target interface. In this study, thin metallic films of Ni, Ti, Cr, and V were explored for use in electron beam exit windows, and their properties were compared with the properties of their bulk counterparts. Simulation results of metal foils predicted Ti to exhibit less beam power dissipation compared to Ni. However, Ni possesses superior mechanical and structural properties compared to Ti. The performance of these films under electron beam irradiation was examined by depositing thin layers of these films on silicon and metallic substrates using magnetron sputtering and exposing them to e-beam irradiation in a controlled setup. The deposited films were subjected to a dose of approximately 66 kGy at a beam energy of 10 MeV and characterized prior to and postexposure to the beam using field emission scanning electron microscopy, atomic force microscopy, x-ray diffraction (XRD), and nanoindentation. Particular emphasis was given to characteristics like the grain structure, surface morphology, dislocation density, and hardness. XRD patterns revealed irradiation-induced changes in peak intensities, while the crystallinity remained largely unchanged. Nanoindentation results showed that the pristine and irradiated Ti and Ni films were twice as hard when compared to bulk Ti and Ni samples, regardless of the substrate type used (Si or bulk Ti, or Ni). These results emphasize the superior mechanical properties of thin metal films compared to their bulk counterparts. In conclusion, this study advances the optimization of thin film materials for robust and efficient e-beam applications, ensuring improved durability and operational reliability.

AFM↗

Metamorphic Epitaxy Solutions for Thermophotovoltaic and Laser Power Conversion Applications

Metamorphic GaInAs enables photovoltaic devices optimized for a wide range of bandgaps between 0.35 and 1.41 eV. We have developed compositionally graded buffers made of GaInP and AlGaInAs to enable growth of these devices on GaAs substrates with low dislocation densities and high performance. We present results for devices grown on both graded buffer materials with device bandgaps in the range 0.58-1.41 eV and compare the benefits and drawbacks of each material system. These results enable high performance for applications such as thermophotovoltaics and optical power transmission using high power lasers.

III-V↗

Role of scaffold network in controlling strain and functionalities of nanocomposite films

One novel approach to manipulating functionalities in correlated complex oxides is strain. However, significant epitaxial strain can only be achieved in ultrathin layers. We show that, under direct lattice matching framework, large and uniform vertical strain up to 2% can be achieved to significantly modify the magnetic anisotropy, magnetism, and magnetotransport properties in heteroepitaxial nanoscaffold films, over a few hundred nanometers in thickness. Comprehensive designing principles of large vertical strain have been proposed. Phase-field simulations not only reveal the strain distribution but also suggest that the ultimate strain is related to the vertical interfacial area and interfacial dislocation density. Moreover, by changing the nanoscaffold density and dimension, the strain and the magnetic properties can be tuned. The established correlation among the vertical interface—strain—properties in nanoscaffold films can consequently be used to tune other functionalities in a broad range of complex oxide films far beyond critical thickness.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ammonothermal Bulk GaN Substrates for Power Electronics

Soraa has developed a novel ammonothermal approach for growth of high quality, true bulk GaN crystals at a greatly reduced cost, known as SCoRA (Scalable Compact Rapid Ammonothermal). SCoRA GaN growth has been performed on seed crystals with diameters between 5 mm and 2" to thicknesses of 0.5-4 mm. The highest growth rates are greater than 40 um/h and rates in the 10-30 um/h range are routinely observed. Two-inch diameter, crack-free, free-standing, n-type bulk GaN crystals have been grown. The crystals have been characterized by a range of techniques, including x-ray diffraction rocking-curve (XRC) analysis, optical microscopy, cathodoluminescence (CL), optical spectroscopy, and capacitance-voltage measurements. The crystallinity of the grown crystals is very good, with FWHM values of 15-80 arc-sec and average dislocation densities below 5E5 cm -2 .

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗