Search NASA⌕ Search

SEARCH · Search NASA

Results for “distribution selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

LOW-RESOLUTION SPECTROSCOPY OF GAMMA-RAY BURST OPTICAL AFTERGLOWS: BIASES IN THE SWIFT SAMPLE AND CHARACTERIZATION OF THE ABSORBERS

We present a sample of 77 optical afterglows (OAs) of Swift detected gamma-ray bursts (GRBs) for which spectroscopic follow-up observations have been secured. Our first objective is to measure the redshifts of the bursts. For the majority (90%) of the afterglows, the redshifts have been determined from the spectra. We provide line lists and equivalent widths (EWs) for all detected lines redward of Ly{alpha} covered by the spectra. In addition to the GRB absorption systems, these lists include line strengths for a total of 33 intervening absorption systems. We discuss to what extent the current sample of Swift bursts with OA spectroscopy is a biased subsample of all Swift detected GRBs. For that purpose we define an X-ray-selected statistical sample of Swift bursts with optimal conditions for ground-based follow-up from the period 2005 March to 2008 September; 146 bursts fulfill our sample criteria. We derive the redshift distribution for the statistical (X-ray selected) sample and conclude that less than 18% of Swift bursts can be at z > 7. We compare the high-energy properties (e.g., {gamma}-ray (15-350 keV) fluence and duration, X-ray flux, and excess absorption) for three subsamples of bursts in the statistical sample: (1) bursts with redshifts measured from OA spectroscopy; (2) bursts with detected optical and/or near-IR afterglow, but no afterglow-based redshift; and (3) bursts with no detection of the OA. The bursts in group (1) have slightly higher {gamma}-ray fluences and higher X-ray fluxes and significantly less excess X-ray absorption than bursts in the other two groups. In addition, the fractions of dark bursts, defined as bursts with an optical to X-ray slope {beta}{sub OX} < 0.5, is 14% in group (1), 38% in group (2), and >39% in group (3). For the full sample, the dark burst fraction is constrained to be in the range 25%-42%. From this we conclude that the sample of GRBs with OA spectroscopy is not representative for all Swift bursts, most likely due to a bias against the most dusty sight lines. This should be taken into account when determining, e.g., the redshift or metallicity distribution of GRBs and when using GRBs as a probe of star formation. Finally, we characterize GRB absorption systems as a class and compare them to QSO absorption systems, in particular the damped Ly{alpha} absorbers (DLAs). On average GRB absorbers are characterized by significantly stronger EWs for H I as well as for both low and high ionization metal lines than what is seen in intervening QSO absorbers. However, the distribution of line strengths is very broad and several GRB absorbers have lines with EWs well within the range spanned by QSO-DLAs. Based on the 33 z > 2 bursts in the sample, we place a 95% confidence upper limit of 7.5% on the mean escape fraction of ionizing photons from star-forming galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Investigation of liquid cloud microphysical properties of deep convective systems: 1. Parameterization raindrop size distribution and its application for stratiform rain estimation

Abstract To investigate liquid‐phase ( T > 3°C) cloud and precipitation microphysical properties within Deep Convective Systems (DCSs), eight DCS cases sampled by the University of North Dakota Citation II research aircraft during Midlatitude Continental Convective Clouds Experiment were selected. A full spectrum of raindrop size distribution (DSD) was constructed from 120 µm to 4000 µm through a combination of two‐dimensional cloud probe (120 to 900 µm) and High Volume Precipitation Spectrometer (900 to 4000 µm) data sets. A total of 1126 five second DSDs have been used to fit to Gamma and Exponential functions within the stratiform rain (SR) regions of DCSs. The Gamma shape μ Γ and slope λ Γ parameters are then compared with those derived from surface disdrometer measurements. The similar μ Γ ‐ λ Γ relationships but different μ Γ and λ Γ value ranges from two independent platforms at different elevations may represent the real nature of DSD shape information in clouds and at the surface. To apply the exponentially fitted DSD parameters to precipitation estimation using Next Generation Weather Radar (NEXRAD) radar reflectivity factor Z e , the terms N 0 E and λ E have been parameterized as a function of Z e using an empirical N 0 E ‐ λ E relationship. The averaged SR rain rate retrieved from this study is almost identical to the surface measurements, while the NEXRAD Q2 precipitation is twice as large. The comparisons indicate that the new DSD parameterization scheme is robust, while the Q2 SR precipitation estimation based on Marshall‐Palmer Z‐R relationship, where a constant DSD intercept parameter ( N 0 E ) was assumed, needs to be improved for heavy precipitation cases.

Wang, Jingyu↗

An Elastic-Plastic and Strength Prediction Model for Injection-Molded Long-Fiber Thermoplastics

This paper applies a recently developed model to predict the elastic-plastic stress/strain response and strength of injection-molded long-fiber thermoplastics (LFTs). The model combines a micro-macro constitutive modeling approach with experimental characterization and modeling of the composite microstructure to determine the composite stress/strain response and strength. Specifically, it accounts for elastic fibers embedded in a thermoplastic resin that exhibits the elastic-plastic behavior obeying the Ramberg-Osgood relation and J-2 deformation theory of plasticity. It also accounts for fiber length, orientation and volume fraction distributions in the composite formed by the injection-molding process. Injection-molded-long-glass-fiber/polypropylene (PP) specimens were prepared for mechanical characterization and testing. Fiber length, orientation, and volume fraction distributions were then measured at some selected locations for use in the computation. Fiber orientations in these specimens were also predicted using an anisotropic rotary diffusion model developed for LFTs. The stress-strain response of the as-formed composite was computed by an incremental procedure that uses the Eshelby’s equivalent inclusion method, the Mori-Tanaka assumption and a fiber orientation averaging technique. The model has been validated against the experimental stress-strain results obtained for these long-glass-fiber/PP specimens.

36 MATERIALS SCIENCE↗

Patch selection by bumble bees navigating discontinuous landscapes

Pollen and nectar resources are unevenly distributed over space and bees must make routing decisions when navigating patchy resources. Determining the patch selection process used by bees is crucial to understanding bee foraging over discontinuous landscapes. To elucidate this process, we developed four distinct probability models of bee movement where the size and the distance to the patch determined the attractiveness of a patch. A field experiment with a center patch and four peripheral patches of two distinct sizes and distances from the center was set up in two configurations. Empirical transition probabilities from the center to each peripheral patch were obtained at two sites and two years. The best model was identified by comparing observed and predicted transition probabilities, where predicted values were obtained by incorporating the spatial dimensions of the field experiment into each model’s mathematical expression. Bumble bees used both patch size and isolation distance when selecting a patch and could assess the total amount of resources available in a patch. Bumble bees prefer large, nearby patches. This information will facilitate the development of a predictive framework to the study of bee movement and of models that predict the movement of genetically engineered pollen in bee-pollinated crops.

54 ENVIRONMENTAL SCIENCES↗

Cluster Mass Calibration at High Redshift: HST Weak Lensing Analysis of 13 Distant Galaxy Clusters from the South Pole Telescope Sunyaev-Zel’dovich Survey

We present an HST/Advanced Camera for Surveys (ACS) weak gravitational lensing analysis of 13 massive high-redshift (z(median) = 0.88) galaxy clusters discovered in the South Pole Telescope (SPT) Sunyaev-Zel'dovich Survey. This study is part of a larger campaign that aims to robustly calibrate mass-observable scaling relations over a wide range in redshift to enable improved cosmological constraints from the SPT cluster sample. We introduce new strategies to ensure that systematics in the lensing analysis do not degrade constraints on cluster scaling relations significantly. First, we efficiently remove cluster members from the source sample by selecting very blue galaxies in V - I colour. Our estimate of the source redshift distribution is based on Cosmic Assembly Near-infrared Deep Extragalactic Legacy Survey (CANDELS) data, where we carefully mimic the source selection criteria of the cluster fields. We apply a statistical correction for systematic photometric redshift errors as derived from Hubble Ultra Deep Field data and verified through spatial cross-correlations. We account for the impact of lensing magnification on the source redshift distribution, finding that this is particularly relevant for shallower surveys. Finally, we account for biases in the mass modelling caused by miscentring and uncertainties in the concentration-mass relation using simulations. In combination with temperature estimates from Chandra we constrain the normalization of the mass-temperature scaling relation ln (E(z) M-500c/10(14)M(circle dot)) = A + 1.5ln (kT/7.2 keV) to A = 1.81(-0.14)(+0.24)(stat.)+/- 0.09(sys.), consistent with self-similar redshift evolution when compared to lower redshift samples. Additionally, the lensing data constrain the average concentration of the clusters to c(200c) = 5.6(-1.8)(+3.7).

cosmology: observations↗

A Framework for Developing Management Goals for Species at Risk and Application to Military Installations in the United States

A decision framework for setting management goals for species at risk is presented. Species at risk are those whose potential future rarity is of concern. Listing these species as threatened or endangered could potentially result in significant restrictions to activities in resource management areas in order to maintain those species. The management areas in the example application are United States (US) military installations, which are concerned about potential restrictions to military training capacity if species at risk become regulated under the US Endangered Species Act. The decision framework, designed to foster proactive management, has nine steps: identify species at risk on and near the management area, describe available information and potential information gaps for each species, determine the potential distribution of species and their habitat, select metrics for describing species status, assess the status of local population or metapopulation, conduct threat assessment, set and prioritize management goals, develop species management plans, and develop criteria for ending special species management where possible. This framework will aid resource managers in setting management goals that minimally impact human activities while reducing the likelihood that species at risk will become rare in the near future. The benefits of the proactive management set forth in this formal decision framework are that it is impartial, provides a clear procedure, calls for identification of causal relationships that may not be obvious, provides a way to target the most urgent needs, reduces costs, enhances public confidence, and, most importantly, decreases the chance of species becoming more rare.

54 ENVIRONMENTAL SCIENCES↗

Verification of the surrogate ratio method

Effects of difference in the spin and parity distributions for the surrogate and neutron-induced reactions are investigated. Without assuming specific (schematic) spin-parity distributions, it was found that the surrogate ratio method can be employed to determine neutron fission and capture cross sections if (1) weak Weisskopf-Ewing condition (defined in this paper) is satisfied, (2) there exist two surrogate reactions whose spin-parity distributions of the decaying nuclei are almost equivalent, and (3) difference of the representative spin values between the neutron-induced and surrogate reactions is no much larger than 10(Planck constant/2pi). If these conditions are satisfied, we need not know the spin-parity distributions populated by the surrogate method. Instead, we should just select a pair of surrogate reactions which will populate the similar spin-parity distributions, using targets having similar structure and reactions having the similar reaction mechanisms. Achievable accuracy is estimated to be around 5% and 10% for fission and capture channels, respectively, for nuclei of the Uranium region. The surrogate absolute method may be applicable to determination of fission cross sections with a caution. However, there will be little hope to apply this method for capture cross section measurements unless the spin-parity distributions in the neutron-induced and surrogate reactions are fairly close to each other (which is implausible) or the difference can be corrected theoretically. The surrogate ratio method was shown also to be a robust method in the presence of breakup reactions without assuming specific breakup reaction mechanisms.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Climate Change Impacts at Department of Defense

This project is aimed at providing the U.S. Department of Defense (DoD) with a comprehensive analysis of the uncertainty associated with generating climate projections at the regional scale that can be used by stakeholders and decision makers to quantify and plan for the impacts of future climate change at specific locations. The merits and limitations of commonly used downscaling models, ranging from simple to complex, are compared, and their appropriateness for application at installation scales is evaluated. Downscaled climate projections are generated at selected DoD installations using dynamic and statistical methods with an emphasis on generating probability distributions of climate variables and their associated uncertainties. The sites selection and selection of variables and parameters for downscaling was based on a comprehensive understanding of the current and projected roles that weather and climate play in operating, maintaining, and planning DoD facilities and installations.

54 ENVIRONMENTAL SCIENCES↗

Resource selection and species interactions between native and non‐native fishes in a simulated stream system

Abstract Effective fishery management necessitates understanding of resource partitioning by fishes that inhabit complex systems composed of biotic and abiotic features. Evaluations of non‐native species introductions have continually demonstrated adverse effects associated with abundance and distribution of native fishes. Therefore, understanding resource selection and interactions between native and non‐native species is important for recovery efforts. Habitat use by two native fish species (largescale sucker Catostomus macrocheilus [Girard] and mountain whitefish Prosopium williamsoni [Girard]) and one non‐native fish species (pumpkinseed Lepomis gibbosus [Linnaeus]) of the Kootenai River, Idaho, were evaluated in a laboratory stream system. Trials were conducted in allopatry and in sympatry with and without the presence of wood to describe habitat selection in the context of on‐going habitat rehabilitation efforts. Interactions were evident between native largescale sucker and non‐native pumpkinseed concerning use of a woody structure and current velocity. Mountain whitefish used low‐velocity habitats and selected locations that were further from wood when in sympatry with pumpkinseed. Our research suggests that habitat use of native, large‐river fishes may be influenced by the presence of a non‐native species, and that considering such interactions is critical when designing and implementing habitat rehabilitation efforts in river ecosystems.

Branigan, Philip R.↗

Sizing up the milky way: a bayesian mixture model meta-analysis of photometric scale length measurements

The exponential scale length (L {sub d}) of the Milky Way’s (MW’s) disk is a critical parameter for describing the global physical size of our Galaxy, important both for interpreting other Galactic measurements and helping us to understand how our Galaxy fits into extragalactic contexts. Unfortunately, current estimates span a wide range of values and are often statistically incompatible with one another. Here, we perform a Bayesian meta-analysis to determine an improved, aggregate estimate for L {sub d}, utilizing a mixture-model approach to account for the possibility that any one measurement has not properly accounted for all statistical or systematic errors. Within this machinery, we explore a variety of ways of modeling the nature of problematic measurements, and then employ a Bayesian model averaging technique to derive net posterior distributions that incorporate any model-selection uncertainty. Our meta-analysis combines 29 different (15 visible and 14 infrared) photometric measurements of L {sub d} available in the literature; these involve a broad assortment of observational data sets, MW models and assumptions, and methodologies, all tabulated herein. Analyzing the visible and infrared measurements separately yields estimates for L {sub d} of 2.71{sub −0.20}{sup +0.22} kpc and 2.51{sub −0.13}{sup +0.15} kpc, respectively, whereas considering them all combined yields 2.64 ± 0.13 kpc. The ratio between the visible and infrared scale lengths determined here is very similar to that measured in external spiral galaxies. We use these results to update the model of the Galactic disk from our previous work, constraining its stellar mass to be 4.8{sub −1.1}{sup +1.5}×10{sup 10} M {sub ⊙}, and the MW’s total stellar mass to be 5.7{sub −1.1}{sup +1.5}×10{sup 10} M {sub ⊙}.

79 ASTRONOMY AND ASTROPHYSICS↗

Programming in a proposed 9X distributed Ada

The proposed Ada 9X constructs for distribution was studied. The goal was to select suitable test cases to help in the evaluation of the proposed constructs. The examples were to be considered according to the following requirements: real time operation; fault tolerance at several different levels; demonstration of both distributed and massively parallel operation; reflection of realistic NASA programs; illustration of the issues of configuration, compilation, linking, and loading; indications of the consequences of using the proposed revisions for large scale programs; and coverage of the spectrum of communication patterns such as predictable, bursty, small and large messages. The first month was spent identifying possible examples and judging their suitability for the project.

Waldrop, Raymond S.↗

The period and magnetic field distributions of cataclysmic variables - Implications for their evolution

Comparison of the period distributions of various classes of CVs confirms an extreme bias of the synchronous AM Her systems toward short orbital periods, while the DQ Her systems do not differ significantly from the distribution of nonmagnetic systems. This suggests either strong selection effects or enhanced evolution of the AM Her systems. There is as yet no obvious bimodality in either the magnetic field distributions of isolated white dwarfs or of CV primaries. However, clear differences between the two exist: the strongest being that magnetic primaries are overrepresented among short period CVs by more than an order of magnitude in comparison to the field white dwarfs.

Schmidt, G. D.↗

Evaluation of Variable Facesheet Liner Configurations for Broadband Noise Reduction

This paper investigates the broadband noise reduction properties of a distributed (variable) facesheet liner. Candidate uniform samples are selected using the Wave Propagation Model and Two-Parameter Model developed at the NASA Langley Research Center. Three uniform and one distributed facesheet samples are tested in the Normal Incidence Tube (NIT) at NASA Langley. Initial results show that the distributed facesheet sample possesses broadband noise reduction properties. Acoustic impedances educed from these NIT tests are used as inputs into the Convected Helmholtz Equation (CHE) propagation code developed at NASA Langley to synthesize the acoustic pressure field in the Grazing Flow Impedance Tube (GFIT) with no flow. Three uniform, one distributed, as well as one three-zone liner, oriented in two different directions, are investigated. Preliminary results showed the distributed facesheet and three-zone liners exhibit broadband noise reduction properties.

M C Brown↗

Dark Energy Survey Year 1 Results: Cross-Correlation Redshifts in the DES -- Calibration of the Weak Lensing Source Redshift Distributions

We present the calibration of the Dark Energy Survey Year 1 (DES Y1) weak lensing source galaxy redshift distributions from clustering measurements. By cross-correlating the positions of source galaxies with luminous red galaxies selected by the redMaGiC algorithm we measure the redshift distributions of the source galaxies as placed into different tomographic bins. These measurements constrain any such shifts to an accuracy of $\sim0.02$ and can be computed even when the clustering measurements do not span the full redshift range. The highest-redshift source bin is not constrained by the clustering measurements because of the minimal redshift overlap with the redMaGiC galaxies. We compare our constraints with those obtained from $\texttt{COSMOS}$ 30-band photometry and find that our two very different methods produce consistent constraints.

79 ASTRONOMY AND ASTROPHYSICS↗

A satellite communications system for electric utilities

This paper presents the results of a study into the feasibility of using satellite communications for a country-wide system of electric distribution system monitoring and control. The concept selected for study involves the use of a geostationary satellite with a large multi-beam antenna to provide a major part of the communications and control network between participating utilities and various elements of their power distribution networks, including customer loads. Electric utility communications requirements are projected through 1995 in order to size the required capacity of the system. Two basic systems are examined: a one-way system for load control, and a two-way system for distribution system monitoring and control, including customer meter reading. An operating protocol is proposed for each system. Preliminary cost estimates are identified element by element. Finally, expansion of the basic system to include a set of ancillary communications functions is briefly discussed.

Vaisnys, A.↗

A Wise census of young stellar objects in the Perseus OB2 association

We have performed a Wide-Field Infrared Survey Explorer based study to identify and characterize young stellar objects (YSOs) in the 12° × 12° Perseus OB2 association. A spectral energy distribution (SED) slope in the range of 3.4–12 μm and 5σ selection criteria were used to select our initial sample. Further manual inspection reduced our final catalog to 156 known and 119 YSO candidates. The spatial distribution of newly found YSOs all over the field shows an older generation of star formation in which most of its massive members have evolved into main-sequence stars. In contrast, the majority of younger members lie within the Perseus molecular cloud and currently active star-forming clusters such as NGC 1333 and IC 348. We also identified an additional 66 point sources that passed YSO selection criteria but are likely AGB stars. However, their spatial distribution suggests that they may contain a fraction of the YSOs. Comparing our results with the commonly used color–color selections, we found that while the color selection method fails in picking up bright but evolved weak disks, our SED fitting method can identify such sources, including transitional disks. In addition, we have less contamination with background sources such as galaxies, but at a price of losing fainter (J{sub mag}>12) YSOs. Finally, we employed a Bayesian Monte Carlo SED fitting method to determine the characteristics of each YSO candidate. Distribution of SED slopes and model-driven age and mass confirms separated YSO populations with three suggested age groups of younger than 1 Myr old, 1–5 Myr old, and older than 5 Myr, which agrees with the age of the Per OB2 association and currently star-forming sites within the cloud.

79 ASTRONOMY AND ASTROPHYSICS↗

F TURNOFF DISTRIBUTION IN THE GALACTIC HALO USING GLOBULAR CLUSTERS AS PROXIES

F turnoff stars are important tools for studying Galactic halo substructure because they are plentiful, luminous, and can be easily selected by their photometric colors from large surveys such as the Sloan Digital Sky Survey (SDSS). We describe the absolute magnitude distribution of color-selected F turnoff stars, as measured from SDSS data, for 11 globular clusters in the Milky Way halo. We find that the M{sub g} distribution of turnoff stars is intrinsically the same for all clusters studied, and is well fit by two half-Gaussian functions, centered at {mu} = 4.18, with a bright-side {sigma} = 0.36, and with a faint-side {sigma} = 0.76. However, the color errors and detection efficiencies cause the observed {sigma} of the faint-side Gaussian to change with magnitude due to contamination from redder main-sequence stars (40% at 21st magnitude). We present a function that will correct for this magnitude-dependent change in selected stellar populations, when calculating stellar density from color-selected turnoff stars. We also present a consistent set of distances, ages, and metallicities for 11 clusters in the SDSS Data Release 7. We calculate a linear correction function to Padova isochrones so that they are consistent with SDSS globular cluster data from previous papers. We show that our cluster population falls along the Milky Way age-metallicity relationship (AMR), and further find that isochrones for stellar populations on the AMR have very similar turnoffs; increasing metallicity and decreasing age conspire to produce similar turnoff magnitudes and colors for all old clusters that lie on the AMR.

79 ASTRONOMY AND ASTROPHYSICS↗

Measurement and Analysis of Porosity in Al-10Si-1Mg Components Additively Manufactured by Selective Laser Melting

Aluminum alloys are candidate materials for weight critical applications because of their excellent strength and stiffness to weight ratio. However, defects such as voids decrease the strength and fatigue life of these alloys, which can limit the application of Selective Laser Melting. In this study, the average volume fraction, average size, and size distribution of pores in Al10-Si-1Mg samples built using Selective Laser Melting have been characterized. Synchrotron high energy X-rays were used to perform computed tomography on volumes of order one cubic millimeter with a resolution of approximately 1.5 μm. Substantial variations in the pore size distributions were found as a function of process conditions. Even under conditions that ensured that all locations were melted at least once, a significant number density was found of pores above 5 μm in diameter.

36 MATERIALS SCIENCE↗