Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrode interface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Electrochemistry of the NaI-AlBr 3 Molten Salt System: A Redox-Active, Low-Temperature Molten Salt Electrolyte

NaI-AlBr 3 is a very appealing low melting temperature (<100 °C), salt system for use as an electrochemically-active electrolyte. This system was investigated for its electrochemical and physical properties with focus to energy storage considerations. A simple phase diagram was generated; at >100 °C, lower NaI concentrations had two partially miscible liquid phases, while higher NaI concentrations had solid particles. Considering the fully molten regime, electrical conductivities were evaluated over 5–25 mol% NaI and 110 °C–140 °C. Conductivities of 6.8–38.9 mS cm −1 were observed, increasing with temperature and NaI concentration. Effective diffusion coefficients of the I − /I 3 − redox species were found to decrease with both increasing NaI concentration and increasing applied potential. Regardless, oxidation current density at 3.6 V vs Na/Na + was observed to increase with increasing NaI concentration over 5–25 mol%. Finally, the critical interface between the molten salt electrolyte and electrode materials was found to significantly affect reaction kinetics. When carbon was used instead of tungsten, an adsorbed species, most likely I 2 , blocked surface sites and significantly decreased current densities at high potentials. This study shows the NaI-AlBr 3 system offers an attractive, low-temperature molten salt electrolyte that could be useful to many applied systems, though composition and electrode material must be considered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Review on Solid State Batteries: Life Cycle Perspectives

This report briefly reviews the characteristics of solid-state batteries (SSBs) and the life-cycle analysis (LCA) studies that have been completed for SSBs. Compared with conventional lithium-ion batteries (LIBs), SSBs offer improved safety and potentially higher energy density — both enabled by replacing liquid electrolytes with solid electrolytes and using lithium metal anodes. Several challenges impede the commercialization of SSBs, primarily related to the stability of the interface between the solid electrolyte and the electrodes. Several options are under consideration for SSB electrolyte and cathode chemistries. As a result, the production processes for these components and the corresponding battery packs are still under development and can differ significantly from those used for conventional LIB pack production. A robust comparison of SSBs with LIBs through LCA is important to analyze the environmental benefits and challenges associated with this alternative battery system. While the literature provides only a few LCA studies focused on SSBs, with significant uncertainty in their life-cycle inventories (LCIs), those studies collectively suggest that solid electrolyte manufacturing is the major environmental hotspot, followed by cathode and anode production.

25 ENERGY STORAGE↗

Understanding Solid-Electrolyte Interphase Formation at the Lithium Metal Anode of Lithium-Sulfur Batteries

Lithium-sulfur (Li-S) batteries are one of the most promising chemistries for the next generation of energy storage devices. In a standard Li-S cell, the metallic lithium anode is an essential component of the battery due to its low density, extremely high theoretical specific capacity, and very low negative electrochemical potential. However, several challenges related to the use of Li metal have prevented this battery technology from becoming commercially available. For instance, Li-anodes are highly reactive, which results in the continuous decomposition of the electrolyte and the formation of the solid-electrolyte interphase (SEI) layer. This, combined with the non-uniform deposition of Liions during plating at the anode surface, can seriously affect the performance, cycling, and safety of the battery. In addition, it has been suggested that a controlled SEI formation at the metallic Li anode can yield enhanced battery performance. Hence, a comprehensive understanding of how the SEI layer is formed can help elucidate improvements in this battery technology. In this work, the formation of the SEI layer in Li-S batteries is investigated using density functional theory (DFT) and ab initio molecular dynamics (AIMD) simulations. The stability of liquid organic-based electrolyte components, salt concentration, electron-rich environments, and the use of inorganic solid-state electrolyte (SSE) materials are explored in order to provide molecular-level fundamental insights into how the nature and composition of the electrolyte can alter the initial stages of the SEI formation. The products of electrolyte decomposition and electro-/chemical reaction pathways of liquid electrolyte component such as solvent and salts are predicted from AIMD simulations of electrolyte-anode interfaces. Energetics of reactions from DFT ground-state optimizations are also presented to confirm the decomposition mechanisms. Some significant differences are then drawn regarding the use of low and high salt concentrations. Simulations under electron-rich environments show additional multielectron electrochemical reactions of solvent and salt decomposition taking place due to the excess of electrons and the presence of radical anions in the solution. Finally, the initial stages of formation, stability, and main constituents of interfaces between Li-metal and Sbased electrodes with sulfide-based SSEs are characterized in detail.

25 ENERGY STORAGE↗

Silicon/HfO{sub 2} interface: Effects of proton irradiation

Substrate oxide interfaces are of paramount importance in deciding the quality of the semiconductor devices. In this work we have studied how 200 keV proton irradiation affects the interface of a 13 nm thick, atomic layer deposited hafnium dioxide on silicon substrate. Pre- and post-irradiation electrical measurements are used to quantify the effect of proton irradiation for varying electrode geometries. Proton irradiation introduces positive charge in the oxide and at the interface of Si/HfO{sub 2} interface. The gate current is not very much affected under positive injection since the induced positive charge is compensated by the injected electrons. Current voltage characteristics under negative bias get affected by the proton irradiation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pick-and-Place Transfer of Arbitrary-Metal Electrodes for van der Waals Device Fabrication

Van der Waals electrode integration is a promising strategy to create nearly perfect interfaces between metals and 2D materials, with advantages such as eliminating Fermi-level pinning and reducing contact resistance. However, the lack of a simple, generalizable pick-and-place transfer technology has greatly hampered the wide use of this technique. Here, we demonstrate the pick-and-place transfer of prefabricated electrodes from reusable polished hydrogenated diamond substrates without the use of any sacrificial layers due to the inherent low-energy and dangling-bond-free nature of the hydrogenated diamond surface. The technique enables transfer of arbitrary-metal electrodes and an electrode array, as demonstrated by successful transfer of eight different elemental metals with work functions ranging from 4.22 to 5.65 eV. We also demonstrate the electrode array transfer for large-scale device fabrication. The mechanical transfer of metal electrodes from diamond to van der Waals materials creates atomically smooth interfaces with no interstitial impurities or disorder, as observed with cross-section high-resolution transmission electron microscopy and energy-dispersive X-ray spectroscopy. As a demonstration of its device application, we use the diamond transfer technique to create metal contacts to monolayer transition metal dichalcogenide semiconductors with high-work-function Pd, low-work-function Ti, and semimetal Bi to create n- and p-type field-effect transistors with low Schottky barrier heights. We also extend this technology to air-sensitive materials (trilayer 1T’ WTe 2 ) and other applications such as ambipolar transistors, Schottky diodes, and optoelectronics. This highly reliable and reproducible technology paves the way for new device architectures and high-performance devices.

2D materials↗

Theoretical Characterization of Correlated Redox Activity and Nanostructure in Hybrid Supercapacitors

Electrochemical energy storage devices such as supercapacitors, batteries, and fuel cells fundamentally rely on complex and correlated redox processes at electrode/electrolyte interfaces. Furthermore, the nanostructured morphology of high-surface area electrodes can significantly modulate this physics, and further complicates mechanistic understanding. Focusing on supercapacitor devices composed of carbon/polymer based electrodes and organic electrolytes, we will employ first-principles-based computer simulations to understand the coupling of these essential energy storage pathways occurring at the electrode/electrolyte interface. Of critical importance will be the development of theoretical methodologies to allow for the first-principles description of redox processes within electrochemical systems at fixed external voltage. Based on our hypothesis that redox activity and ion structuring is dramatically altered under nanoconfinement, we will then conduct a systematic study utilizing atomistic models of nanoporous carbon electrodes to understand the coupling of redox-activity, energy-storage, and nanostructuring for a variety of electrode morphologies.

25 ENERGY STORAGE↗

Unified computational model of transport in metal-insulating oxide-metal systems

In this paper, a unified physics-based model of electron transport in metal-insulator-metal (MIM) systems is presented. In this model, transport through metal-oxide interfaces occurs by electron tunneling between the metal electrodes and oxide defect states. Transport in the oxide bulk is dominated by hopping, modeled as a series of tunneling events that alter the electron occupancy of defect states. Electron transport in the oxide conduction band is treated by the drift–diffusion formalism and defect chemistry reactions link all the various transport mechanisms. It is shown that the current-limiting effect of the interface band offsets is a function of the defect vacancy concentration. These results provide insight into the underlying physical mechanisms of leakage currents in oxide-based capacitors and steady-state electron transport in resistive random access memory (ReRAM) MIM devices. An explanation of ReRAM bipolar switching behavior based on these results is proposed.

36 MATERIALS SCIENCE↗

Temperature dependence of contact resistance at metal/MWNT interface

Although contact resistance of carbon nanotube (CNT) is one of the most important factors for practical application of electronic devices, a study regarding temperature dependence on contact resistance of CNTs with metal electrodes has not been found. Here, we report an investigation of contact resistance at multiwalled nanotube (MWNT)/Ag interface as a function of temperature, using MWNT/polydimethylsiloxane (PDMS) composite. Electrical resistance of MWNT/PDMS composite revealed negative temperature coefficient (NTC). Excluding the contact resistance with Ag electrode, the NTC effect became less pronounced, showing lower intrinsic resistivity with the activation energy of 0.019 eV. Activation energy of the contact resistance of MWNT/Ag interface was determined to be 0.04 eV, two times larger than that of MWNT-MWNT network. The increase in the thermal fluctuation assisted electron tunneling is attributed to conductivity enhancement at both MWNT/MWNT and MWNT/Ag interfaces with increasing temperature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Numerical Simulation and Experimental Investigation of Nitrogen Transfer Mechanism from Gas to Liquid Steel During Pressurized Electroslag Remelting Process

Since the gas–slag–metal three-phase transfer mechanism of nitrogen is not suitable to account for the nitrogen pickup during pressurized electroslag remelting process, the laboratory experiments have been carried out to study the transfer mechanism of nitrogen using different nitrogen partial pressures and electrode immersion depths. Then, two possible transfer mechanisms of nitrogen have been proposed, and a 2D transient numerical model has been developed to investigate the behavior of nitrogen based on the new proposed mechanisms. The simulated results are compared with the experiment to validate the feasibility of new proposed mechanism. The results show that the nitrogen content in ingot increases with the increasing nitrogen partial pressure and decreasing electrode immersion depth. At the current experimental condition, the electrode immersion depth seems to play a more important role in the nitrogen pickup than the nitrogen partial pressure. Due to the limits of thermodynamic and kinetic conditions, the nitrogen pickup is negligible via the transfer from gas to liquid metal through molten slag whether nitrogen chemically or physically dissolves into slag. The mechanism that nitrogen directly reacts with the partially exposed liquid metal film under the electrode tip due to the fluctuation of gas/slag interface could reasonably account for the experimental results. Furthermore, based on the mechanism, the predicted variation tendency of nitrogen content in ingot is in agreement with the experiment.

36 MATERIALS SCIENCE↗

Solution-Deposited and Patternable Conductive Polymer Thin-Film Electrodes for Microbial Bioelectronics

Microbial bioelectronic devices integrate naturally occurring or synthetically engineered electroactive microbes with microelectronics. These devices have a broad range of potential applications, but engineering the biotic–abiotic interface for biocompatibility, adhesion, electron transfer, and maximum surface area remains a challenge. Prior approaches to interface modification lack simple processability, the ability to pattern the materials, and/or a significant enhancement in currents. We report a novel conductive polymer coating that significantly enhances current densities relative to unmodified electrodes in microbial bioelectronics is reported. The coating is based on a blend of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) crosslinked with poly(2-hydroxyethylacrylate) (PHEA) along with a thin polydopamine (PDA) layer for adhesion to an underlying indium tin oxide (ITO) electrode. When used as an interface layer with the current-producing bacterium Shewanella oneidensis MR-1, this material produces a 178-fold increase in the current density compared to unmodified electrodes, a current gain that is higher than previously reported thin-film 2D coatings and 3D conductive polymer coatings. The chemistry, morphology, and electronic properties of the coatings are characterized and the implementation of these coated electrodes for use in microbial fuel cells, multiplexed bioelectronic devices, and organic electrochemical transistor based microbial sensors are demonstrated. It is envisioned that this simple coating will advance the development of microbial bioelectronic devices.

patterned bioelectronics↗

Scanning Electrochemical Microscopy: An Evolving Toolbox for Revealing the Chemistry within Electrochemical Processes

The parallel development of ultramicroelectrodes (UMEs) and groundbreaking scanning probe microscopy techniques in the late 1980s led to the development of the scanning electrochemical microscope. Scanning electrochemical microscopy (SECM) was born from the idea of using a tiny electrode to measure the local electrochemical behavior at operating electrodes. From its foundations, the technique displayed an inherent versatility in measuring sample properties beyond topography. It allowed experimenters to measure and map chemical reactions occurring at diverse interfaces, from inspecting the reversibility of redox mediators at metal electrodes, to detecting the hallmarks of cellular respiration on living plant leaves. Related but distinct electrochemical scanning probe techniques, such as electrochemical atomic force microscopy (EC-AFM), scanning ion conductance microscopy (SICM), and scanning electrochemical cell microscopy (SECCM) have developed in parallel. These techniques have demonstrated exquisite spatial resolution down to the nanoscale regime. However, it is the proposition of this review that SECM remains unmatched at revealing the chemical aspects of electrochemistry. Furthermore, it is our intention to review and demonstrate that the versatile architecture of SECM continues to evolve and address fundamental and emerging challenges in the fields of energy storage and conversion, chemical biology, materials science, and environmental chemistry, among others.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterizing Structure-Dependent TiS 2 /Water Interfaces Using Deep-Neural-Network-Assisted Molecular Dynamics

As a promising layered electrode material, TiS 2 -based capacitive deionization (CDI) devices for water desalination have attracted significant attention. However, TiS 2 /H 2 O interfacial features, potentially important for device optimization, remain unidentified. Using Deep Potential Molecular Dynamics (DPMD), we characterized distinct aqueous interfaces introduced by four TiS 2 terminations expected to be present as water intercalates into TiS 2 , namely, Armchair, Zigzag, Zigzag-L, and Zigzag-R. First, we assessed important representative physical properties of the system to validate the deep potentials (DPs). DPMD simulations agree well with experiments and first-principles simulations, suggesting the DPs are accurate and reliable. Subsequent simulations of these TiS 2 /water interfaces revealed how TiS 2 surface termination influences the structure of interfacial water. This effect is most evident in the first and second water layers close to the TiS 2 surface, and more pronounced when spontaneous dissociative adsorption of water occurs. The extent of water dissociation on each surface was evaluated using enhanced sampling. Zigzag-L is the only interface where proton transfer from adsorbed water to TiS 2 surface S atoms is thermodynamically and kinetically favored. The coexistence of surface four-fold-coordinated Ti (Ti 4c ) and one-fold-coordinated S (S 1c ) is found to be essential to making proton transfer feasible on the Zigzag-L surface. Furthermore, remaining unprotonated S 1c atoms can act as good proton acceptors after water dissociation. Thus, TiS 2 with Zigzag-L termination may be a surface to avoid in CDI device construction, given that pH fluctuations adversely affect performance. Furthermore, this work provides new understanding of TiS 2 /H 2 O interfacial features that could aid future design and optimization of TiS 2 -based CDI devices for water desalination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

(Photo)Electrocatalytic CO 2 Reduction at the Defective Anatase TiO 2 (101) Surface

Excessive carbon dioxide (CO 2 ) emissions by combustion of fossil fuels are linked to global warming and rapid climate change. One promising route to lowering the concentration of CO 2 in the atmosphere is to reduce it to useful small molecules via photoelectrocatalytic hydrogenation, which would enable solar energy storage with a zero-carbon emission cycle and perform a more efficient separation of the photogenerated electron and hole pair than pure photocatalysis. Indeed, photoelectrocatalytic CO 2 reduction has been an intense focus of research. Using the density functional theory (DFT), we studied the CO 2 reduction reaction on the defective anatase TiO 2 (101) surface, at both the solvent/catalyst and the electrolyte/catalyst interfaces. The analysis of the electronic structure of the surface shows a contrast between the solvent/catalyst and the electrolyte/catalyst interfaces, which results in the two corresponding catalytic cycles being distinct. Furthermore, our study explains at the electronic and mechanistic levels why methanol is the main product in the presence of the electrolyte and why the overpotential is not only controlled by the reaction process but also by the diffusion process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxygen and germanium migration at low temperature influenced by the thermodynamic nature of the materials used in germanium metal-insulator-semiconductor structures

The influence of the reductive character of the metals used for the gate electrode on O migration in gate stacks and following reductive or oxidative reactions at an interface between a high permittivity (high-k) insulating layer and Ge or Si was investigated. The magnitude of the increase or decrease of Ge or Si oxides in the gate stacks caused by the metal layer deposition can be systematically correlated with the oxygen chemical potential (μ{sub O}) of gate metals for both Ge and Si systems. However, the influence of the gate metals on oxidative/reductive reactions of a semiconductor element is more significant for the Ge gate stacks than the Si system. Detailed investigations of Ge oxide as a function of depth were used to determine that the strong μ{sub O} dependence of the increase or decrease in the Ge oxide is because of the high diffusivity of Ge into the high-k oxide. In particular, migration of Ge into the high-k oxide occurs concurrently with O migration towards the reductive metal layer, and the strong reductive character of the metal significantly influences the decrease in the amount of Ge oxide. These results indicate the importance of the selection of gate metals based on μ{sub O} for controlling high-k/Ge interfacial structures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Aqueous Ni-rich-cathode dispersions processed with phosphoric acid for lithium-ion batteries with ultra-thick electrodes

Lithium-ion battery (LIB) production can benefit both economically and environmentally from aqueous processing. Although these electrodes have the potential to surpass electrodes conventionally processed with N -methyl-2-pyrrolidone (NMP) in terms of performance, significant issues still exist with respect to ultra-thick cathodes ($\gg$4 mAh/cm 2 areal capacities). A major concern for these types of electrodes with high-nickel active material stems from lithium leaching from active material, which drives the pH of the dispersion in excess of 12 and subsequently corrodes the current collector interface. As this corrosion reaction proceeds, hydrogen generation at the interface creates bubbles which cause severe cracking in the dried electrode surface. When areal loadings are increased, this effect becomes more pronounced and is detrimental to both mechanical and electrochemical properties of these electrodes. In this work, a technique for mitigating corrosion at the current collector by adjusting the pH of the dispersion with the addition of phosphoric acid is investigated. Phosphoric acid was added in 0.5 wt% increments between 0.0 and 1.5 wt%, and effects on rheology, adhesion, corrosion, and electrochemical performance were investigated. A technique is reported for producing aqueous processed cathodes with areal loadings of 6–8 mAh/cm 2 with reduced surface cracking and superior high-rate discharge capacity (i.e. high-power performance) for this class of cathode loadings.

25 ENERGY STORAGE↗

Vertically aligned carbon nanofiber as nano-neuron interface for monitoring neural function

Neural chips, which are capable of simultaneous, multi-site neural recording and stimulation, have been used to detect and modulate neural activity for almost 30 years. As a neural interface, neural chips provide dynamic functional information for neural decoding and neural control. By improving sensitivity and spatial resolution, nano-scale electrodes may revolutionize neural detection and modulation at cellular and molecular levels as nano-neuron interfaces. We developed a carbon-nanofiber neural chip with lithographically defined arrays of vertically aligned carbon nanofiber electrodes and demonstrated its capability of both stimulating and monitoring electrophysiological signals from brain tissues in vitro and monitoring dynamic information of neuroplasticity. This novel nano-neuron interface can potentially serve as a precise, informative, biocompatible, and dual-mode neural interface for monitoring of both neuroelectrical and neurochemical activity at the single cell level and even inside the cell.

59 BASIC BIOLOGICAL SCIENCES↗

Memristive behavior and forming mechanism of homogeneous TiO{sub x} device

Highlights: • We fabricated a homogeneity TiO{sub x} device with excellent memristive behavior. • The double-interface conductive filament model is suggested. • The calculated I–V curve is in agreement with the experimental results. • The switching voltage could be adjusted by selecting the proper electrode materials. - Abstract: A homogeneous titanium oxide device is fabricated by Molecular Beam Epitaxy and the excellent memristive behavior could be observed. The resistance ratio between high resistance state and low resistance state increases as the thickness of titanium oxide or the oxygen content reduces. The forming voltage is lower than the previous report. Based on the experimental results, we suggest a double-interface conductive filament model and calculate the current–voltage curve of the device in agreement with experimental measurements. The result indicates that the forming voltage of the device will rise with increasing of the chemical potential differences across the two interfaces. In other words, the switching voltage could be adjusted by selecting a proper electrode and oxide materials.

36 MATERIALS SCIENCE↗