Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrostatic atomizing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Exploration of vertical scaling limit in carbon nanotube transistors

Top-gated carbon nanotube field-effect transistors (CNT FETs) were fabricated by using ultra-thin (4.5 nm or thinner) atomic-layer-deposition grown HfO{sub 2} as gate insulator, and shown to exhibit high gate efficiency, i.e., all examined (totally 76) devices present very low room temperature subthreshold swing with an averaged value of 64 mV/Dec, without observable carrier mobility degradation. The gate leakage of the CNT FET under fixed gate voltage is dependent not only on the thickness of HfO{sub 2} insulator, but also on the diameter of the CNT. The vertical scaling limit of CNT FETs is determined by gate leakage standard in ultra large scale integrated circuits. HfO{sub 2} film with effective oxide thickness of 1.2 nm can provide both excellent gate electrostatic controllability and small gate leakage for sub-5 nm FETs based on CNT with small diameter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simulating water adsorption in metal–organic frameworks with open metal sites using the 12-6-4 Lennard–Jones potential

Metal-organic frameworks (MOFs) with coordinatively unsaturated open metal sites (OMSs) are promising sorbent materials in atmospheric water harvesting (AWH) systems at low relative humidity (RH) due to their strong interactions with water molecules. However, accurate computational modelling of water adsorption in those materials are challenging, as standard force fields (FFs) based on the 12-6 Lennard-Jones (L-J) potential cannot properly describe the water-OMS interactions. In biomolecular simulations, the 12-6-4 L-J potential has been successfully used to model metal ion-water interactions in which the extra 1/r 4 -term is for charge-induced dipole electrostatics. In this work, we adopted this strategy and used the 12-6-4 L-J potential to model water-OMS interactions in MOFs for low RH AWH applications. Notably, without any modifications, the parameters used for aqueous metal ions were able to greatly improve the accuracy in predicting water adsorption isotherms in MOF-74, which highlights the simplicity and transferability of this method.

74 ATOMIC AND MOLECULAR PHYSICS↗

Breaking the Time Barrier in Kelvin Probe Force Microscopy: Fast Free Force Reconstruction Using the G-Mode Platform

The atomic force microscope (AFM) offers unparalleled insight into structure and material functionality across nanometer length scales. However, the spatial resolution afforded by the AFM tip is counterpoised by slow detection speeds compared to other common microscopy techniques (e.g. optical, scanning electron microscopy etc.). In this work, we develop an AFM imaging approach allowing ultrafast reconstruction of the tip-sample forces having ~2 orders of magnitude higher time resolution than standard detection methods. Fast free force recovery (F3R) overcomes the widely-viewed temporal bottleneck in AFM, i.e. the mechanical bandwidth of the cantilever, enabling time-resolved imaging at sub-bandwidth speeds. We demonstrate quantitative recovery of electrostatic forces with ~10 µs temporal resolution, free from cantilever ring-down effects. We further apply the F3R method to Kelvin probe force microscopy (KPFM) measurements. F3R-KPFM is an open loop imaging approach (i.e. no bias feedback), allowing ultrafast surface potential measurements (e.g. < 20 µs) to be performed at regular KPFM scan speeds. F3R-KPFM is demonstrated for exploration of ion migration in organometallic halide perovskites materials and shown to allow spatio-temporal imaging of positively charged ion migration under applied electric field, as well as subsequent formation of accumulated charges at the perovskite/electrode interface. In this work we demonstrate quantitative F3R-KPFM measurements – however, we fully expect the F3R approach to be valid for all modes of non-contact AFM operation, including non-invasive probing of ultrafast electrical and magnetic dynamics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Dataset for manuscript "Consequences of the failure of equipartition for the p-V behavior of liquid water and the hydration free energy components of a small protein"

Previously, we showed that in the molecular dynamics simulation of a rigid model of water it is necessary to use an integration time-step dt that is less than or equal to 0.5 fs to ensure equipartition between translational and rotational modes. We extended that study in the NVT ensemble to NpT conditions and to an aqueous protein. We study neat liquid water with the rigid, SPC/E model and the protein BBA (PDB ID: 1FME) solvated in the rigid, TIP3P model. We examined integration time-steps ranging from 0.5 fs to 4.0 fs for various thermostat plus barostat combinations. We find that a small time-step, dt, is necessary to ensure consistent prediction of the simulation volume. Hydrogen mass repartitioning alleviates the problem somewhat, but is ineffective for the typical time-step used with this approach. The compressibility, a measure of volume fluctuations, is seen to be sensitive to dt. Using the mean volume estimated from the NpT simulation, we examined the electrostatic and van der Waals contribution to the hydration free energy of the protein in the NVT ensemble. These contributions are also sensitive to dt. In going from a time-step of 2 fs to a time-step of 0.5 fs, the change in the net electrostatic plus van der Waals contribution to the hydration of BBA is already in excess of the folding free energy reported for this protein. The data-set contains the simulation metadata and log files that support the claims noted above.

59 BASIC BIOLOGICAL SCIENCES↗

Molecular Dynamics and Free Energy Calculations of Dicyclohexano-18-crown-6 Diastereoisomers with Sm 2+ , Eu 2+ , Dy 2+ , Yb 2+ , Cf 2+ , and Three Halide Salts in Tetrahydrofuran and Acetonitrile Using the AMOEBA Force Field

With the continual development of lanthanides (Ln) in current technological devices, an efficient separation process is needed that can recover greater amounts of these rare elements. Dicyclohexano-18-crown-6(DCH18C6) is a crown ether that may be a promising candidate for Ln separation, but additional research is required. As such, molecular dynamics(MD) simulations have been performed on four divalent lanthanide halide salts(Sm 2+ , Eu 2+ , Dy 2+ , and Yb 2+ ) and one divalent actinide halide salt (Cf 2+ ) bound to three diastereoisomers of DCH18C6. Dy 2+ , Yb 2+ , Cf 2+ , DCH18C6, and tetrahydrofuran (THF) solvent were parameterized for the AMOEBA polarizable force field for the first time, whereas existing parameters for Sm 2+ and Eu 2+ were utilized from our previous efforts. A coordination number (CN) of six for Ln 2+ /An 2+ –O solvated in THF indicated that the cations interacted almost entirely with the oxygens of the polyether ring. A CN of one for Ln 2+ /An 2+ -N solvated in acetonitrile for systems containing iodide suggested that theN atom of acetonitrile was competitive with I – for cation interactions. Fluctuation between five and six CNs for Dy 2+ and Yb 2+ suggested that although the cations remained in the polyether ring, the size of the ring may not be an ideal fit as these cations possess comparatively smaller ionic radii. Gibbs binding free energies of Sm 2+ in all DCH18C6 diastereoisomers solvated in THF were calculated. The binding free energy of the cis-syn-cis diastereoisomer was the most favorable, followed by cis-anti-cis, and then trans-anti-trans. Lastly, two major types of conformation were observed for each diastereoisomer that were related to the electrostatic interactions and charge density of the cations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heteroepitaxial vertical perovskite hot-electron transistors down to the monolayer limit

Two-dimensional heterostructures combined with vertical geometries are candidates to probe and utilize the physical properties of atomically-thin materials. The vertical configuration enables a unique form of hot-carrier spectroscopy as well as atomic-scale devices. Here, we present the room-temperature evolution of heteroepitaxial perovskite hot-electron transistors using a SrRuO 3 base down to the monolayer limit ( ~ 4 Å). As a fundamental electronic probe, we observe an abrupt transition in the hot-electron mean free path as a function of base thickness, coinciding with the thickness-dependent resistive transition. As a path towards devices, we demonstrate the integrated synthesis of perovskite one-dimensional electrical edge contacts using water-soluble and growth-compatible Sr 3 Al 2 O 6 hard masks. Edge-contacted monolayer-base transistors exhibit on/off ratios reaching ~ 10 8 , complete electrostatic screening by the base manifesting pure hot-electron injection, and excellent scaling of the output current density with device dimensions. These results open new avenues for incorporating emergent phenomena at oxide interfaces and in heterostructures.

36 MATERIALS SCIENCE↗

Electron Density of Corannulene from Synchrotron Data at 12 K, Comparison with Fullerenes

The electron density of corannulene, C{sub 20}H{sub 10}, was derived from a high-resolution synchrotron data set (sin{theta}/{lambda} = 1.11 {angstrom}{sup -1}) measured at 12 K and from an ab-initio geometry optimization on the B3LYP/6-31G* level. A full topological analysis yielded atomic and bond-topological properties which were compared between experimental and theoretical findings and, as far as steric congruences exist, with corresponding fragments of the fullerene C{sub 70}. For the four different types of C-C bonds in corannulene, a rather close bond-order range between 1.3 and 1.8 was found indicating a considerable delocalization in this molecule. As was already found earlier in fullerene cages, the deformation density on the C-C bonds is not arranged symmetrically. There is more density located outside than inside the corannulene bowl so that in total, charge accumulation is shifted to the outer surface of the molecule. The electrostatic potential suggests an H{hor_ellipsis}{pi} stacking in the crystal which directs the relative orientation of the two crystallographically independent corannulene molecules. The positively charged rim region of one molecule is oriented almost perpendicular to the negative potential region at the bottom of a second molecule.

36 MATERIALS SCIENCE↗

How good are polarizable and flexible models for water: Insights from a many-body perspective

We present a systematic analysis of state-of-the-art polarizable and flexible water models from a many-body perspective, with a specific focus on their ability to represent the Born–Oppenheimer potential energy surface of water from the gas to the liquid phase. Using coupled cluster data in the completed basis set limit as a reference, we examine the accuracy of the polarizable models in reproducing individual many-body contributions to interaction energies and harmonic frequencies of water clusters and compare their performance with that of MB-pol, an explicit many-body model that has been shown to correctly predict the properties of water across the entire phase diagram. Based on these comparisons, we use MB-pol as a reference to analyze the ability of the polarizable models to reproduce the energy landscape of liquid water under ambient conditions. We find that, while correctly reproducing the energetics of minimum-energy structures, the polarizable models examined in this study suffer from inadequate representations of many-body effects for distorted configurations. To investigate the role played by geometry-dependent representations of 1-body charge distributions in reproducing coupled cluster data for both interaction and many-body energies, we introduce a simplified version of MB-pol that adopts fixed atomic charges and demonstrate that the new model retains the same accuracy as the original MB-pol model. Based on the analyses presented in this study, we believe that future developments of both polarizable and explicit many-body models should continue in parallel and would benefit from synergistic efforts aimed at integrating the best aspects of the two theoretical/computational frameworks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heterogeneous sub-continuum ionic transport in statistically isolated graphene nanopores

Graphene and other two-dimensional materials offer a new class of ultrathin membranes that can have atomically defined nanopores with diameters approaching those of hydrated ions. These nanopores have the smallest possible pore volumes of any ion channel, which, due to ionic dehydration8 and electrokinetic effects9, places them in a novel transport regime and allows membranes to be created that combine selective ionic transport10 with ultimate permeance and could lead to separations and sensing applications. However, experimental characterization and understanding of sub-continuum ionic transport in nanopores below 2 nm is limited. Here we show that isolated sub-2 nm pores in graphene exhibit, in contrast to larger pores, diverse transport behaviours consistent with ion transport over a free-energy barrier arising from ion dehydration and electrostatic interactions. Current–voltage measurements reveal that the conductance of graphene nanopores spans three orders of magnitude8 and that they display distinct linear, voltage-activated or rectified current–voltage characteristics and different cation-selectivity profiles. In rare cases, rapid, voltage-dependent stochastic switching is observed, consistent with the presence of a dissociable group in the pore vicinity. A modified Nernst–Planck model incorporating ion hydration and electrostatic effects quantitatively matches the observed behaviours.

36 MATERIALS SCIENCE↗

The emergence of three-dimensional chiral domain walls in polar vortices

Abstract Chirality or handedness of a material can be used as an order parameter to uncover the emergent electronic properties for quantum information science. Conventionally, chirality is found in naturally occurring biomolecules and magnetic materials. Chirality can be engineered in a topological polar vortex ferroelectric/dielectric system via atomic-scale symmetry-breaking operations. We use four-dimensional scanning transmission electron microscopy (4D-STEM) to map out the topology-driven three-dimensional domain walls, where the handedness of two neighbor topological domains change or remain the same. The nature of the domain walls is governed by the interplay of the local perpendicular (lateral) and parallel (axial) polarization with respect to the tubular vortex structures. Unique symmetry-breaking operations and the finite nature of domain walls result in a triple point formation at the junction of chiral and achiral domain walls. The unconventional nature of the domain walls with triple point pairs may result in unique electrostatic and magnetic properties potentially useful for quantum sensing applications.

36 MATERIALS SCIENCE↗

Gyrokinetic Simulation of Energetic Particles

The SciDAC-3 project Gyrokinetic Simulation of Energetic Particles (GSEP) was started in 2008 as cooperative agreement research with General Atomic (GA), University of California at Irvine (UCI lead institution), Oak Ridge National Laboratory, and others. This Technical Report covers only the GA work. Understanding and predicting the confinement of energetic particles (EPs) in fusion plasma is an important research area vital to the successful operation of fusion reactors. Exterior Neutral Beam Injected (NBI) EPs are a primary source of plasma heating in current tokamaks like DIII-D. Internally generated fusion alpha particles in burning plasmas like ITER must be nearly all confined to heat the plasma to fusion conditions without much exterior heating. The thermal hydrogen plasma suffer energy confinement loses from high-n micro-turbulent driven transport. Electrostatic microturbulence has a small but not negligible impart on EP confinement loss. However is has been known since the early 90’ that NBI and particularly fusion alphas EPs can drive low-n MHD-like low-n electromagnetic Alfven Eigenmodes (AEs) unstable with the possibility significant loss of plasma heating. Even without significant heating loss, low levels of high energy escaping alphas can damage and erode the tokamak wall. The main purpose and goal of the GSEP project was to apply GA’s GYRO and UCI’s GTC gyrokinetic codes to delineate the linear stability boundaries of the EP driven AE modes in the most physically accurate way going beyond the kinetic EP perturbed MHD codes of the 90’s. Most importantly the nonlinear gyrokinetic simulations were to treat the EP driven low-n AE modes embedded in the high-n microturbulence to actually quantify the EP transport loss of confinement. The gyrokinetic codes GYRO, GTC (and GEM) where to be verified and cross-compared with simpler gyro-fluid (TAEFL) and kinetic EP perturbed MHD codes (NOVA-K) to project ITER performance, as well as validated against DIII-D experiments on AE driven NBI confinement losses. The following documents and briefly summarizes the published GA-GSEP contributions to the success of this 9-year project. The work was done by the R.E. Waltz (GA-GSEP PI) in collaboration with UCSD Research Scientist E. M. Bass also supported under this grant. Some of the later work was done in collaboration with a Peking University (Beijing, China) graduate student He Sheng (not funded by this grant).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental investigation of dissociation pathways of cooled HeH{sup +} following valence electron excitation at 32 nm by intense free-electron-laser radiation

The dissociation pathways of HeH{sup +} have been investigated below the first ionization continuum by photoabsorption at 32 nm, using fragment momentum imaging in a crossed-beams experiment at the free-electron laser in Hamburg (FLASH). Investigations were done both for ions with several vibrational levels excited in the ion source and for ions vibrationally cooled in an electrostatic ion trap prior to the irradiation. The product channels He{sup +}(1s)+H(nl) and He(1snl)+H{sup +} were separated and the He(1snl)+H{sup +} channel was particularly studied by coincidence detection of the He and H{sup +} fragments on two separate fragment detectors. At 32 nm excitation, the branching ratio between the product channels was found to be {sigma}{sub He}{sup +}{sub +H}/{sigma}{sub He+H}{sup +}=0.96{+-}0.11 for vibrationally hot and 1.70{+-}0.48 for vibrationally cold ions. The spectra of kinetic energy releases for both channels revealed that photodissociation at 32 nm leads to high Rydberg states (n > or approx. 3-4) of the emerging atomic fragments irrespective of the initial vibrational excitation of HeH{sup +}. The fragment angular distributions showed that dissociation into the He+H{sup +} channel mostly ({approx}70%) proceeds through {sup 1{Pi}} states, while for the He{sup +}+H channel {sup 1{Sigma}} and {sup 1{Pi}} states are of about equal importance.

74 ATOMIC AND MOLECULAR PHYSICS↗

Edge-Confined Excitons in Monolayer Black Phosphorus

Quantum confinement of two-dimensional excitons in van der Waals materials via electrostatic trapping, lithographic patterning, Moiré potentials, and chemical implantation has enabled significant advances in tailoring light emission from nanostructures. While such approaches rely on complex preparation of materials, natural edges are a ubiquitous feature in layered materials and provide a different approach for investigating quantum-confined excitons. Here, we observe that certain edge sites of monolayer black phosphorus (BP) strongly localize the intrinsic quasi-one-dimensional excitons, yielding sharp spectral lines in photoluminescence, with nearly an order of magnitude line width reduction. Through structural characterization of BP edges using transmission electron microscopy and first-principles GW plus Bethe–Salpeter equation (GW-BSE) calculations of exemplary BP nanoribbons, we find that certain atomic reconstructions can strongly quantum-confine excitons resulting in distinct emission features, mediated by local strain and screening. Here we observe linearly polarized luminescence emission from edge reconstructions that preserve the mirror symmetry of the parent BP lattice, in agreement with calculations. Furthermore, we demonstrate efficient electrical switching of localized edge excitonic luminescence, whose sites act as excitonic transistors for emission. Localized emission from BP edges motivates exploration of nanoribbons and quantum dots as hosts for tunable narrowband light generation, with future potential to create atomic-like structures for quantum information processing applications as well as exploration of exotic phases that may reside in atomic edge structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrostatic steering and beamlet aiming in large neutral beam injectors

Neutral beam injection is the main method for plasma heating in magnetic confinement fusion devices. In high energy injector (E>100 keV/amu), neutrals are obtained with reasonable efficiency by conversion of negative ions (H- or D-) via electron detachment reactions. In the case of ITER injectors, which shall operate at 1 MeV, a total ion current of ∼ 40 A is required to satisfy the heating power demand. Gridded electrodes are therefore used in the accelerator, so that 1280 negative ion beamlets are accelerated together. A carefully designed aiming system is required to control the beamlet trajectories, and to deliver their power on a focal point located several meters away from the beam source. In nowadays injectors, the aiming is typically obtained by aperture offset technique or by grid shaping. This paper discuss an alternative concept of beamlets aiming, based on an electrostatic ”steerer” to be placed at the end of the accelerator. A feasibility study of this component is also presented, and its main advantages and drawbacks with respect to other methods are discussed.

43 PARTICLE ACCELERATORS↗

First-Principles Prediction of Thermodynamically Stable Two-Dimensional Electrides

Two-dimensional (2D) electrides, emerging as a new type of layered material whose electrons are confined in interlayer spaces instead of at atomic proximities, are receiving interest for their high performance in various (opto)electronics and catalytic applications. Experimentally, however, 2D electrides have been only found in a couple of layered nitrides and carbides. We report new thermodynamically stable alkaline-earth based 2D electrides by using a first-principles global structure optimization method, phonon spectrum analysis, and molecular dynamics simulation. The method was applied to binary compounds consisting of alkaline-earth elements as cations and group VA, VIA, or VIIA nonmetal elements as anions. We also revealed that the stability of a layered 2D electride structure is closely related to the cation/anion size ratio; stable 2D electrides possess a sufficiently large cation/anion size ratio to minimize electrostatic energy among cations, anions, and anionic electrons. This work demonstrates a new avenue to the discovery of thermodynamically stable 2D electrides beyond experimental material databases and provides new insight into the principles of electride design.

36 MATERIALS SCIENCE↗

National Security Science and Technology Initiative: Air Cargo Screening

The non-intrusive inspection (NII) of consolidated air cargo carried on commercial passenger aircraft continues to be a technically challenging, high-priority requirement of the Department of Homeland Security's Science and Technology Directorate (DHS S&T), the Transportation Security Agency and the Federal Aviation Administration. The goal of deploying a screening system that can reliably and cost-effectively detect explosive threats in consolidated cargo without adversely affecting the flow of commerce will require significant technical advances that will take years to develop. To address this critical National Security need, the Battelle Memorial Institute (Battelle), under a Cooperative Research and Development Agreement (CRADA) with four of its associated US Department of Energy (DOE) National Laboratories (Oak Ridge, Pacific Northwest, Idaho, and Brookhaven), conducted a research and development initiative focused on identifying, evaluating, and integrating technologies for screening consolidated air cargo for the presence of explosive threats. Battelle invested $8.5M of internal research and development funds during fiscal years 2007 through 2009. The primary results of this effort are described in this document and can be summarized as follows: (1) Completed a gap analysis that identified threat signatures and observables, candidate technologies for detection, their current state of development, and provided recommendations for improvements to meet air cargo screening requirements. (2) Defined a Commodity/Threat/Detection matrix that focuses modeling and experimental efforts, identifies technology gaps and game-changing opportunities, and provides a means of summarizing current and emerging capabilities. (3) Defined key properties (e.g., elemental composition, average density, effective atomic weight) for basic commodity and explosive benchmarks, developed virtual models of the physical distributions (pallets) of three commodity types and three explosive benchmarks combinations, and conducted modeling and simulation studies to begin populating the matrix of commodities, threats, and detection technologies. (4) Designed and fabricated basic (homogeneous) commodity test pallets and fabricated inert stimulants to support experiments and to validate modeling/simulation results. (5) Developed/expanded the team's capabilities to conduct full-scale imaging (neutron and x-ray) experiments of air cargo commodities and explosive benchmarks. (6) Conducted experiments to improve the collection of trace particles of explosives from a variety of surfaces representative of air cargo materials by means of mechanical (air/vibration/pressure), thermal, and electrostatic methods. Air cargo screening is a difficult challenge that will require significant investment in both research and development to find a suitable solution to ensure the safety of passengers without significantly hindering the flow of commodities. The initiative funded by Battelle has positioned this group to make major contributions in meeting the air cargo challenge by developing collaborations, developing laboratory test systems, improving knowledge of the challenges (both technical and business) for air cargo screening, and increasing the understanding of the capabilities for current inspection methods (x-ray radiography, x-ray backscatter, etc.) and potential future inspection methods (neutron radiography, fusion of detector modalities, advanced trace detection, etc.). Lastly, air cargo screening is still an issue that will benefit from collaboration between Department of Energy Laboratories and Battelle. On January 7, 2010, DHS Secretary Napolitano joined White House Press Secretary Robert Gibbs and Assistant to the President for Counterterrorism and Homeland Security John Brennan to announce several recommendations DHS has made to the President for improving the technology and procedures used to protect air travel from acts of terrorism. (This announcement followed the 25 Dec'09 Delta/Northwest Airlines Flight 253 terror attack.) Secretary Napolitano outlined five recommendations DHS will pursue to enhance the safety of the traveling public. One of the five recommendations, read as follows: 'Establish a partnership on aviation security between DHS and the Department of Energy and its National Laboratories in order to develop new and more effective technologies to deter and disrupt known threats and proactively anticipate and protect against new ways by which terrorists could seek to board an aircraft.' In conclusion, it appears very timely that Battelle and its DOE lab partners initiated a serious collaboration on the air cargo topic, and that we should continue to work toward future collaboration in response to the government's needs.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Expanding Configurational Complexity through Dipole Dilution in Pseudohalide Argyrodite Ion Conductors

The advantageous properties of (pseudo)halide argyrodite ion conductors of the formula Li 6 PS 5 X (X = Cl – , Br – , I – , CN – ) have motivated extensive studies of their structure-transport relationships, particularly as they pertain to the role of atomic site disorder. The argyrodite structure can accommodate additional configurational complexity to promote ion transport via extended three-anion site mixing and the potential for orientational disorder of molecular anions. In this work, we explore a ternary anion system including the cyanide anion, expanding site disorder and introducing dipolar orientations as an additional degree of freedom. We prepared the series Li 6 PS 5 (CN) 1–x Br x , in which the dipolar cyanide anions are systematically diluted with bromide. We find that anion disorder, as determined by synchrotron and neutron diffraction and quantified by configurational entropy (S config ), is correlated with lowered activation barriers and increased lithium ion conductivity. We propose that S config describes the electrostatic heterogeneity of the Li environments, flattening the energetic landscape for ion transport. While anion substitution strongly impacts the activation barrier for transport, the temperature-independent Arrhenius prefactor does not follow the same trend. Through heat-capacity measurements of attempt frequency and deconvolution of terms within the prefactor, we rationalize the apparent decoupling of activation energy and prefactor to strong cyanide-lithium interactions that increase the entropy of migration. Together, these results expand the structure–property relationships in the argyrodite family to encompass multiple facets of disorder and the subsequent impact on lithium ion transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electric contributions to magnetic force microscopy response from graphene and MoS{sub 2} nanosheets

Magnetic force microscopy (MFM) signals have recently been detected from whole pieces of mechanically exfoliated graphene and molybdenum disulfide (MoS{sub 2}) nanosheets, and magnetism of the two nanomaterials was claimed based on these observations. However, non-magnetic interactions or artefacts are commonly associated with MFM signals, which make the interpretation of MFM signals not straightforward. A systematic investigation has been done to examine possible sources of the MFM signals from graphene and MoS{sub 2} nanosheets and whether the MFM signals can be correlated with magnetism. It is found that the MFM signals have significant non-magnetic contributions due to capacitive and electrostatic interactions between the nanosheets and conductive cantilever tip, as demonstrated by electric force microscopy and scanning Kevin probe microscopy analyses. In addition, the MFM signals of graphene and MoS{sub 2} nanosheets are not responsive to reversed magnetic field of the magnetic cantilever tip. Therefore, the observed MFM response is mainly from electric artefacts and not compelling enough to correlate with magnetism of graphene and MoS{sub 2} nanosheets.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗