Search NASA⌕ Search

SEARCH · Search NASA

Results for “end of performance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Solar Absorptivity Degradation of Spacecraft Materials Due to UV and Charged Particles in the Gateway Environment

Gateway will be an outpost in cislunar space designed to survive a 15-year mission to support human Moon landings and future deep space exploration. The Gateway Passive Thermal Control System (PTCS) Group has identified charged particle and UV degradation of potential Gateway materials as a knowledge gap for the Near Rectilinear Halo Orbit (NRHO) and transit environment, especially the slow spiral transit planned for the first two modules. Solar absorptivity degradation is important to quantify because the end-of-life absorptivity impacts thermal performance of the system. To address this, ground testing has been completed at NASA Goddard Space Flight Center in which potential Gateway materials, including radiators, multi-layer insulation (MLI), and structural materials are subjected to the expected transit plus 15-year on-orbit charged particle fluence (9.86x1015 protons/cm2 at 2.5 keV and 3.1x1016 electrons/cm2 at 10 keV) and 5093 Equivalent Solar Hours (ESH). Reflectivity of a single sample of each material was measured in atmosphere and in vacuum inside the chamber after exposure to incremental levels of ESH and charged particle fluence. Increase in absorptivity of most samples were seen throughout the test including large differences in absorptivity of materials of the same category. Future planned testing will validate these results and include additional materials of interest.

Optical Property↗
NASA NTRS2022

Robust Vision-based Multi-spacecraft Guidance Navigation and Control using CNN-based Pose Estimation

In this paper, we present an end-to-end simulation framework for tracking an uncooperative Target spacecraft in Low Earth Orbit using a CubeSat-class Ego spacecraft outfitted with a camera. Currently, capturing high-fidelity realistic images in space for this scenario is difficult and exorbitantly expensive. Therefore, we developed a framework to simulate the spacecraft orbits in Basilisk software and generate high-fidelity realistic images of spacecraft in Unreal Engine, including the effects from Sun, Earth, Moon and stars. The Ego spacecraft uses cameras to capture images of the uncooperative Target and estimates its position and attitude using a CNN based 6DOF pose estimation pipeline, eliminating need for large SWAP-C(Size, Weight, Power and Cost) sensors like LIDAR or reliance on inter-spacecraft communication, This CNN, which is motivated by ESA’s Pose Estimation challenge of 2019, is trained using simulated data from our end-to-end simulation framework. We compare the performance of two distinct CNNbased algorithms for pose estimation along a nominal trajectory. In presence of non-Gaussian modeling uncertainties, the statedependent estimation error is characterized with a quadratic upper-bound. The quadratically-bounded error can be used by a robust controller to maneuver

Rahmani, Amir↗
NASA NTRS2021

Ambient Performance Testing of the CubeSat Infrared Atmospheric Sounder (CIRAS)

Hyperspectral infrared measurements of Earth’s atmosphere from space have proven their value for weather forecasting, climate science and atmospheric composition. The CubeSat Infrared Atmospheric Sounder (CIRAS) instrument will demonstrate a fully functional infrared temperature, water vapor and carbon monoxide sounder in a CubeSat sized volume for at least an order of magnitude lower cost than legacy systems. Design for a CubeSat significantly reduces cost of access to space and enables flight in a constellation to reduce revisit time and enable new measurements including 3D winds. A technology demonstration of CIRAS is currently under development at JPL. The effort has completed integration and ambient testing of a high fidelity brassboard, complete with the flight configured optics assembly developed by Ball Aerospace with a JPL Immersion Grating and Black Silicon Entrance Slit. The brassboard includes a flight-configured High Operating Temperature Barrier Infrared Detector (HOT-BIRD) mounted in an Integrated Dewar Cryocooler Assembly (IDCA), enabling testing in the ambient environment. Ambient testing included radiometric testing of the system to characterize the instrument operability and NEdT. Spatial testing was performed to characterize the system line spread function (LSF) in two axes and report FWHM of the LSF. Spectral testing involved an air path test to characterize the spectral/spatial transformation matrix, and an etalon was used to measure the Spectral Response Functions (SRFs). Results of the testing show the CIRAS performs exceptionally well and meets the key performance required of the system. The end result of testing is the CIRAS instrument now meets TRL 4 with confidence in a brassboard configuration ready for thermal vacuum (TVac) testing necessary to achieve TRL 5 for the system.

Wilson, Robert C.↗
NASA NTRS2024

DAVINCI: Venus Atmospheric Model Comparisons

The Deep Atmosphere Venus Investigation of Noble gases, Chemistry, and Imaging(DAVINCI) mission aims to answer long-standing questions regarding Venus’ origin using Zephyr, an atmospheric descent probe. Zephyr will be the first probe to take high-resolution aerial photographs of a mountainous tesserae surface as it descends over the Alpha Regio highlands region, which has the oldest surfaces of Venus. The Zephyr’s descent trajectory that determines the touchdown in the Alpha Regio, which is crucial for the DAVINCI mission, depends on Venus’ atmospheric properties and winds. Unfortunately, the atmospheric data for Venus from previous missions is sparse. Therefore, it is essential to consider various atmospheric models and scenarios from past flight data to predict Zephyr’s flight performance, specifically landing ellipse. To this end, this work compares three atmospheric models: the Venus Global Reference Atmospheric Model (Venus-GRAM), the Venus Climate Database(VCD), and an empirical wind model developed by Ralph Lorenz for the DAVINCI trajectory simulation and modeling. This paper compares the mean and variations of different atmospheric properties and winds from these atmospheric models. In addition, this work combines the atmospheric properties and the wind variability from the Venus-GRAM with the winds from the Lorenz-based model to have more stressing Venus wind dispersions that allow for more conservative trajectory analysis. Furthermore, this work relies on the DAVINCI landing ellipse size as a metric to measure how robust the trajectory analysis will be to the change in the atmospheric properties and winds of the Venus atmosphere.

Pardha Sai Chadalavada↗
NASA NTRSDate not supplied

Development and Application of NASA SPoRT’s DustTracker-AI Model for Real-Time Identification and Tracking of Dust in Geostationary Satellite Imagery

The NASA Short-term Prediction Research and Transition (SPoRT) Center developed the DustTracker-AI model for identifying and tracking dust in NASA/NOAA Geostationary Operational Environmental Satellite (GOES) imagery in a real-time framework. A training dataset consisting of day and night dust cases was gathered over the southwestern consisting of 115 distinct images and over a million dust pixels and 256 million no dust pixels. The dataset was separated into training (60%), testing (20%), and validation (20%). A simple random forest machine learning model was developed originally to overcome the problem of night-time dust detection and has been expanded to a comprehensive day/night model for dust identification and tracking. This physically-based machine-learning approach uses NASA/NOAA GOES-16 Advanced Baseline Imager infrared imagery as inputs to the model. The model probability of dust output achieves an Area-Under-Curve (AUC) of 0.97 with a standard deviation of 0.04 for dust cases. For images with dust present, the model correctly labels 85% of dust pixels for all dust images in the validation data set. In conjunction with developing the machine-learning model, the NASA Short-term Prediction Research and Transition Center (SPoRT) partnered with NOAA National Weather Service forecast offices to evaluate the model for utility in weather forecasting operations during the 2021 and 2023 late winter-spring seasons. Preliminary evaluation has indicated the majority of forecasters described the DustTracker-AI probabilities as having added confidence to interpreting the Dust RGB and other satellite products to objectively assess the dust extent and trends and increased the amount of time the dust plume could be tracked into the night as compared to use of the Dust RGB. More recently, SPoRT tested small scale events associated with thunderstorm outflow and burn scars to determine the model’s ability to capture local events. This presentation highlights design of the model, validation/evaluation of model performance, and example cases collected during end user product assessments.

Connor H Welch↗
NASA NTRSDate not supplied

Insights and Observations from Operating a Geostationary Laser Communication Relay Mission: Operational Lessons from NASA’s Laser Communications Relay Demonstration (LCRD) and Associated Optical Ground Stations (OGSs)

The NASA Laser Communications Relay Demonstration (LCRD) has operated on orbit for the last two years. The LCRD Mission consists of a geostationary payload and two optical ground stations. This technology demonstration mission is NASA’s first two-way, end-to-end optical communications relay. LCRD has performed an extensive experiment campaign to analyze laser communication performance for extended operations. This paper discusses various lessons learned while operating the optical relay mission from early commissioning through two years of operation. Before launch, engineers and operators performed analyses to generate operational procedures based on expected LCRD performance. However, only operation on orbit can supply actual performance data. Additional topics covered in this paper include pre-launch and commissioning testing, ephemeris generation and cadence, environmental configurations, and accommodation concerns. The addition of Integrated Laser Communications Relay Demonstration Low Earth Orbit User Modem and Amplifier Terminal (ILLUMA-T) to the optical network supplemented the LCRD team’s operational experiences and enabled them to garner new lessons learned. The authors of this paper include day-to-day flight leads who consulted with on-console operators, engineers, and subject matter experts analyzing data and experiment results to gather the lessons learned described in this paper. LCRD is a joint project involving NASA Goddard Space Flight Center (GSFC), the California Institute of Technology Jet Propulsion Laboratory (JPL), and Massachusetts Institute of Technology Lincoln Laboratory (MIT LL).

Lessons Learned↗
NASA NTRSDate not supplied

NASA’s Rotating Detonation Rocket Engine Development

The Rotating Detonation Rocket Engine has maintained steady development at NASA with many staggering performance advantages demonstrated to date over the state-of-the-art (SOA). The implementation of additive manufacturing and specialized NASA developed alloys have enabled rapid maturation of the technology. Several hot fire test projects have been successfully conducted at Marshall Space Flight Center under an early career initiative project funded by NASA Space Technology Mission Directorate. In addition, a new start Technology Demonstration Mission (TDM) project has been funded to investigate challenges relating to integration of turbomachinery with an RDRE thrust chamber assembly. This engine system demonstration will leverage a methane/oxygen single shaft turbopump with fuel rich gas generator and a 10,000 lbf thrust chamber assembly. The configuration was down selected based on feedback from both US industry collaborators and power balance trades in combination with technical feasibility. To date, industry has identified several use cases for RDRE ranging from thruster to primary launch vehicle propulsion. A wide range of fuel and oxidizers were also identified including but not limited to Methane, Kerosene and other liquid hydrocarbon (LH) fuels, and hydrogen. Recent work at NASA and in partnership with NASA has investigated these major fuels of interest with oxygen, air, and hydrogen peroxide (HTP) for various applications. NASA Marshall has already investigated the use of hydrogen/oxygen, methane/oxygen, kerosene/oxygen, and has plans in partnership with industry and academia to investigate LH/air and LH/HTP. In addition to propellants, hardware geometry has been investigated with some critical lessons learned toward greater theoretical performance over the SOA. To this end, several experimental and computational activities are ongoing to further advance the RDRE towards flight missions. Given the rate of advancement, it is highly likely the technology will be flown in space mission in the coming decade. This work documents and overviews many of these investigations and overviews NASA’s future plans for the technology maturation.

Thomas Teasley↗
DOE OSTI2020

Leveraging Machine Learning Capabilities for the Characterization of Irradiated Uranium: A Case Study of Analysis Methods for Nuclear Safeguards and Nuclear Forensics

Nondestructively determining the initial enrichment of irradiated uranium is a complex and laborious multivariable problem due to the presence of fission products. This work demonstrates the capabilities of machine learning to analyze gamma-ray spectral data to determine initial enrichment without knowledge of the decay time of the sample. The approach developed is agnostic to the particular scenario and is applicable to a wide variety of applications in nuclear forensics and nuclear safeguards. We irradiated 5 mg uranium standard reference materials at discrete enrichment values ranging from 0.02% to 97% 235 U (weight percent) in UT Austin’s Nuclear Engineering Teaching Laboratory TRIGA Mark II 1.1 MW research reactor, allowed each to decay for 8 hours, and then measured each sample via gamma-ray spectrometry for 50 hours post-irradiation yielding 1,400 individual gamma-ray spectra discretized into 8,192 energy bins. We then trained decision trees models to analyze individual gamma-ray spectra and estimate the associated initial enrichment without knowledge of the time since end of irradiation. We evaluated the performance of the models with a reserved test set not used for training or calibrating the model. A decision tree model constructed with this procedure achieved a mean absolute error in initial enrichment determination of 2.3% (weight percent 235 U). Next, we implemented a principal component analysis pre-processing routine of the gamma-ray spectrometry data to reduce the dimensionality of the dataset from 8,192 channels in the spectrum to 10 principal components while retaining over 99% of the inherent variance in the data. Decision tree models constructed with these data demonstrated decreased mean absolute error in enrichment determination, reduced computational time, and decreased complexity. A single decision tree model constructed with this procedure achieved a mean absolute error in initial enrichment determination of 0.05% (weight percent 235 U). Furthermore, we analyzed these models with learning curves to ensure that overfitting did not occur. The capabilities provided by these models can be naturally extended to other application-focused measurements in the fields of nuclear safeguards, nuclear forensics, and nuclear non-proliferation.

Drescher, Adam↗
DOE OSTI2024

Commissioning of the Mu2e tracker DAQ, planning for the Vertical Slice Test and pre-pattern recognition studies

The primary objective of the Mu2e experiment at Fermilab is to search for the neutrino-less coherent $\mu \rightarrow e$ conversion in the field of an aluminum nucleus ($\mu^- \text{Al} \rightarrow e^- \text{Al}$). The signature of this process is a monochromatic Conversion Electron (CE) with an energy of approximately 104.97 MeV \cite{bartoszek2015mu2e}. Within the Standard Model (SM), the branching ratio for this process, including neutrino masses and oscillation, is expected to be less than $\mathcal{O}(10^{-50})$. This value is far beyond current experimental capabilities. However, models of physics beyond the SM predict much higher relative rates, approaching an observable level. The SINDRUM II experiment set an upper limit on muon conversion at $7 \times 10^{-13}$ (90\% CL) on Au target \cite{SINDRUMII:2006dvw}, and the Mu2e collaboration aims to improve this limit by four orders of magnitude. Observing this process would provide a clear evidence of physics beyond the Standard Model. A brief discussion of the theoretical and experimental aspects is provided in Chapter \ref{intr}. Mu2e adopts a sophisticated experimental setup to achieve its goals, further described in Chapter \ref{mu2echapter}. The central part of the Mu2e detector is the tracker, that consists of 18 tracking stations. The tracker must provide excellent momentum resolution, approximately 1 MeV/c, to distinguish the monochromatic CE signal from the background. To minimize the energy losses, a straw tube tracker will be used \cite{bobbb}. Chapter \ref{chaptertrk} provides an overview of the straw tracker design and its working principles. This Thesis presents a comprehensive study of the Mu2e tracker, covering complementary aspects from initial commissioning to optimization and first steps of the calibration processes. My work at Fermilab has been focused on the complete Data Acquisition (DAQ) testing from both hardware and software perspectives. I was involved in the commissioning of the Mu2e DAQ system and the Vertical Slice Test (VST) of the tracker. The VST encompasses the entire testing chain, from the straws to the readout, and to processed data on disk. I was also focused on the offline analysis, especially on pre-pattern recognition studies, to explore the best methods for identifying $\delta$-electrons during the data taking. Chapter \ref{commissioning} details the commissioning of the tracker DAQ system, emphasizing the importance of understanding of the readout process before the data acquisition. This includes validating the readout logic and firmware through Monte Carlo simulations to confirm functionality and buffering, monitoring the quality of the data from the tracker preamplifiers and front-end electronics, and assessing overall DAQ performance to ensure reliability during future calibration and data-taking. Chapter \ref{planning} discusses the initial steps towards the tracker calibration. The ultimate goal is to perform a time calibration of the first assembled station of the tracker using cosmic muons, aiming for a longitudinal hit position resolution better than 4 cm. This involves determining the signal propagation times and channel-to-channel delays. I performed a Monte Carlo study to determine the impact of the station orientation on the quality of the calibration, in particular on the cosmic track reconstruction, focusing on potential biases that could arise. These studies provide essential insights into the operation, optimization, and calibration of the Mu2e tracker system. Given the high data volume expected during Mu2e operations, estimated at approximately 7 PBytes per year, optimizing memory usage and minimizing CPU consumption are critical. A significant challenge lies in effectively flagging $\delta$-electron hits, which are the primary source of hits in the tracker, without compromising the efficiency of CE hit detection and track reconstruction. A detailed study of pre-pattern recognition and a thorough comparison of two $\delta$-electron flagging algorithms is provided in Chapter \ref{delta}. In Chapter \ref{conclusions}, the findings are concisely summarized, offering a comprehensive synthesis of the research and emphasizing the key insights derived from this study.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Development and test of a mini-Data Acquisition system for the High-Luminosity LHC upgrade of the ATLAS Monitored Drift Tube detector

New front-end electronics including ASICs and FPGA boards are under development for the ATLAS Monitored Drift Tube (MDT) detector to handle the large data rates and harsh environment expected at high-luminosity LHC runs. A mobile Data Acquisition (miniDAQ) system is designed to perform integration tests of these front-end electronics. In addition, it will be used for surface commissioning of 96 small-radius MDT (sMDT) chambers and for integration and commissioning of new front-end electronics on the present ATLAS MDT chambers. Details of the miniDAQ hardware and firmware are described in this article. Here, the miniDAQ system is also used to read out new front-end electronics on an sMDT prototype chamber using cosmic muons and results obtained are shown.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1991

Experimental study of trajectory planning and control of a high precision robot manipulator

The kinematic and trajectory planning is presented for a 6 DOF end-effector whose design was based on the Stewart Platform mechanism. The end-effector was used as a testbed for studying robotic assembly of NASA hardware with passive compliance. Vector analysis was employed to derive a closed-form solution for the end-effector inverse kinematic transformation. A computationally efficient numerical solution was obtained for the end-effector forward kinematic transformation using Newton-Raphson method. Three trajectory planning schemes, two for fine motion and one for gross motion, were developed for the end-effector. Experiments conducted to evaluate the performance of the trajectory planning schemes showed excellent tracking quality with minimal errors. Current activities focus on implementing the developed trajectory planning schemes on mating and demating space-rated connectors and using the compliant platform to acquire forces/torques applied on the end-effector during the assembly task.

Nguyen, Charles C.↗
DOE OSTI2021

Optimizing Error-Bounded Lossy Compression for Scientific Data on GPUs

Error-bounded lossy compression is a critical technique for significantly reducing scientific data volumes. With ever-emerging heterogeneous high-performance computing (HPC) architecture, GPU-accelerated error-bounded compressors (such as CUSZ and cuZFP) have been developed. However, they suffer from either low performance or low compression ratios. To this end, we propose CUSZ+ to target both high compression ratios and throughputs. We identify that data sparsity and data smoothness are key factors for high compression throughputs. Our key contributions in this work are fourfold: (1) We propose an efficient compression workflow to adaptively perform run-length encoding and/or variable-length encoding. (2) We derive Lorenzo reconstruction in decompression as multidimensional partial-sum computation and propose a fine-grained Lorenzo reconstruction algorithm for GPU architectures. (3) We carefully optimize each of CUSZ kernels by leveraging state-of-the-art CUDA parallel primitives. (4) We evaluate CUSZ+ using seven real-world HPC application datasets on V100 and A100 GPUs. Experiments show CUSZ+ improves the compression throughputs and ratios by up to 18.4x and 5.3x, respectively, over CUSZ on the tested datasets.

Tian, Jiannan↗
NASA NTRS1986

Space Shuttle Main Engine (SSME) LOX turbopump pump-end bearing analysis

A simulation of the shaft/bearing system of the Space Shuttle Main Engine Liquid Oxygen turbopump was developed. The simulation model allows the thermal and mechanical characteristics to interact as a realistic simulation of the bearing operating characteristics. The model accounts for single and two phase coolant conditions, and includes the heat generation from bearing friction and fluid stirring. Using the simulation model, parametric analyses were performed on the 45 mm pump-end bearings to investigate the sensitivity of bearing characteristics to contact friction, axial preload, coolant flow rate, coolant inlet temperature and quality, heat transfer coefficients, outer race clearance and misalignment, and the effects of thermally isolating the outer race from the isolator.

Source record↗
NASA NTRS1979

The ultralight sailplane

As presently envisioned, the ultralight sailplane is intermediate in size, cost and performance between current hang gliders and the lower end of the traditional sailplane spectrum. In the design of an ultralight sailplane, safety, low cost, and operational simplicity were emphasized at the expense of absolute performance. An overview of the design requirements for an ultralight sailplane is presented. It was concluded that by a judicious combination of the technologies of hang gliding, human powered flight, conventional soaring and motor gliding, an operationally and economically viable class of ultralight, self-launching sailplanes can be developed.

Mcmasters, J. H.↗
NASA NTRS1979

An end-to-end command and control concept for NASA data systems

Spacecraft command and control are currently taking on the characteristics of general computer-to-computer interprocess communication. The evolution of these systems during the 1980s will give NASA a true general-purpose end-to-end data request capability for the first time. This concept is presented in outline, with consideration of many of the detailed analyses and subsystem tradeoffs being performed as part of the NEEDS (NASA End-to-End Data System) program.

Desjardins, R.↗
DOE OSTI2019

Modifications produced on a large magnetized plasma column by a floating end-plate that is partially emissive: Experiment and theory

An experiment is performed on a large plasma device operated by the Basic Plasma Science Facility at the University of California, Los Angeles, in which an electrically floating structure is placed near the end of the 18-m magnetized plasma column. The structure consists of a flat carbon plate that acts as a mask for a smaller, ring-shaped LaB6 emissive surface whose temperature can be externally controlled. This configuration has been previously used to study electron heat transport and pressure-driven avalanches [B. Van Compernolle and G. J. Morales, Phys. Plasmas 24, 112302 (2017)] by biasing the LaB6 ring-cathode with respect to a distant anode in a cold afterglow plasma. In contrast, the present study is performed during the active portion of the steady-state discharge in which the nominal plasma parameters are determined by the injection of an electron beam from a BaO cathode at the opposite end. It is found that, even without an applied bias on the LaB6 cathode, the self-consistent potential and current profiles are modified near the end plate as the LaB6 temperature is increased, resulting in density increases on the field lines in contact with the ring-cathode. In the absence of enhanced ionization, at the largest cathode temperatures, the ambient density can be doubled. A theoretical model is presented that provides a quantitative explanation for the experimental observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1975

ASTP communications systems analyses and performance predictions

A research program was conducted to provide ASTP mission communication coverage and performance analyses and to analyze anomalies and special compatibility problems as they arise. The end product of the contract was spacecraft-to-ground communications performance predictions for the ASTP mission, both for direct communication links to ground and for those links via the ATS-6 relay satellite to ground. Solutions are given for the special mission anomalies and compatibility problems encountered. A brief summary describing the work activities expended is given.

Source record↗