Search NASA⌕ Search

SEARCH · Search NASA

Results for “geometry factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Geometry of divergent-beam diffraction.

Divergent-beam diffraction geometry for interpretation of Kossel diffraction patterns in space group assignment lattice parameters and structure factor evaluation

CRYSTAL STRUCTURE↗

Fastening on the F-14A for cost effective fatigue resistance

Cost effectiveness airframe considerations dictated a variable geometry wing design that requires weight optimization, maximum working stress resistance and minimum fatigue concentration factors. The extensive use of titanium structural materials employed electron beam welding methods and interference fit fastening techniques as principle mechanical joining means for economic F-14A production and reliability engineering.

Beal, B. H.↗

Fracture initiation and propagation in a cylindrical shell containing an initial surface flaw

An attempt is made to provide the necessary analytical tools for the application of two different types of fracture criteria to shell structures. Of particular interest is the problem of fracture propagation and arrest in a cylindrical pressure vessel containing an initial surface flaw. It is assumed that the flaw has the most unfavorable geometry and orientation, namely, it is a crack lying on a meridional plane. Stress intensity factor for a part-through crack, and a surface or internal crack with a fully yielded net ligament are considered. Attention is given to constant delta curves for depressurization studies and to depressurization and crack arrest in pressure vessels.

Erdogan, F.↗

Conceptual design study of an Improved Gas Turbine (IGT) powertrain

Design concepts for an improved automotive gas turbine powertrain are discussed. Twenty percent fuel economy improvement (over 1976), competitive costs (initial and life cycle), high reliability/life, low emissions, and noise/safety compliance were among the factors considered. The powertrain selected consists of a two shaft gas turbine engine with variable geometry aerodynamic components and a single disk rotating regenerator. The regenerator disk, gasifier turbine rotor, and several hot section flowpath parts are ceramic. The powertrain utilizes a conventional automatic transmission. The closest competitor was a single shaft turbine engine matched to a continuously variable transmission (CVT). Both candidate powertrain systems were found to be similar in many respects; however, the CVT represented a significant increase in development cost, technical risk, and production start-up costs over the conventional automatic transmission. Installation of the gas turbine powertrain was investigated for a transverse mounted, front wheel drive vehicle.

Johnson, R. A.↗

Evaluation of a high performance, fixed-ratio, traction drive

A test program was initiated to evaluate the key operational and performance factors associated with the Nasvytis multiroller concept. Two sets of Nasvytis drives, each of slightly geometry, were parametrically tested on a back to back test stand. Initial results from these tests are reported. One of these units was later retrofitted to the power turbine of an automotive gas turbine engine and dynamometer tested.

Loewenthal, S. H.↗

Hard X-ray bremsstrahlung production in solar flares by high-energy proton beams

The possibility that solar hard X-ray bremsstrahlung is produced by acceleration of stationary electrons by fast-moving protons, rather than vice versa, as commonly assumed, was investigated. It was found that a beam of protons which involves 1836 times fewer particles, each having an energy 1836 times greater than that of the electrons in the equivalent electron beam model, has exactly the same bremsstrahlung yield for a given target, i.e., the mechanism has an energetic efficiency equal to that of conventional bremsstrahlung models. Allowance for the different degrees of target ionization appropriate to the two models (for conventional flare geometries) makes the proton beam model more efficient than the electron beam model, by a factor of order three. The model places less stringent constraints than a conventional electron beam model on the flare energy release mechanism. It is also consistent with observed X-ray burst spectra, intensities, and directivities. The altitude distribution of hard X-rays predicted by the model agrees with observations only if nonvertical injection of the protons is assumed. The model is inconsistent with gamma-ray data in terms of conventional modeling.

Emslie, A. G.↗

Piloted Simulation Study of Wake Encounters

The objective of this current research is to determine an acceptable level of vortex roll disturbance for worst-case encounter geometries during normal, routine operations. This includes: determining the boundary & metric(s), and defining evaluation factors & procedures. The discussion includes: simulation hardware, research simulator software, and research approach & observations.

Stewart, Eric↗

Nonlinear Elastic J-Integral Measurements in Mode I Using a Tapered Double Cantilever Beam Geometry

An expression for the J-integral of a nonlinear elastic material is derived for an advancing crack in a tapered double cantilever beam fracture specimen. The elastic and plastic fracture energies related to the test geometry and how these energies correlates to the crack position are discussed. The dimensionless shape factors eta(sub el and eta(sub p) are shown to be equivalent and the deformation J-integral is analyzed in terms of the eta(sub el) function. The fracture results from a structural epoxy are interpreted using the discussed approach. The magnitude of the plastic dissipation is found to strongly depend upon the initial crack shape.

Macon, David J.↗

Effective Emissivity of Nonisothermal Isogrid for Spacecraft Radiator Applications

Accurate knowledge of the optical properties of spacecraft components, especially external components, is critical for proper spacecraft thermal design. The effective emissivity of isogrid (an array of equilateral triangular cavities) is not well understood, which poses a challenge for spacecraft thermal management. In this thesis the effective emissivity of isogrid with a prescribed base temperature and nonisothermal walls is examined. The temperature profile of the cavity’s walls and the overall effective emissivity of the cavity are found using Thermal Desktop with Monte Carlo ray tracing. The effective emissivity’s dependence on the wall height, wall thickness, wall resistance, and surface emissivity are examined. The existence of a critical wall height, and the contributing factors to this critical height, are discussed. Comparisons between isogrid and cavities with different base geometries are made. A variable emissivity isogrid spacecraft radiator concept employing the cavity effect is proposed, and mechanisms for achieving this are discussed.

Seth Abramczyk↗

Evaluating the Bulk Lorentz Factors of Outflow Material: Lessons Learned from the Extremely Energetic Outburst GRB 160625B

GRB 160625B is an extremely bright outburst with well-monitored afterglow emission. The geometry-corrected energy is high, up to ∼5.2 × 10{sup 52} erg or even ∼8 × 10{sup 52} erg, rendering it the most energetic GRB prompt emission recorded so far. We analyzed the time-resolved spectra of the prompt emission and found that in some intervals there were likely thermal-radiation components and the high energy emission was characterized by significant cutoff. The bulk Lorentz factors of the outflow material are estimated accordingly. We found out that the Lorentz factors derived in the thermal-radiation model are consistent with the luminosity-Lorentz factor correlation found in other bursts, as well as in GRB 090902B for the time-resolved thermal-radiation components, while the spectral cutoff model yields much lower Lorentz factors that are in tension with the constraints set by the electron pair Compton scattering process. We then suggest that these spectral cutoffs are more likely related to the particle acceleration process and that one should be careful in estimating the Lorentz factors if the spectrum cuts at a rather low energy (e.g., ∼tens of MeV). The nature of the central engine has also been discussed, and a stellar-mass black hole is favored.

79 ASTRONOMY AND ASTROPHYSICS↗

Photonic crystal cavity modes in the visible range characterized by scattering spectroscopy

We fabricate L3 cavities in a silicon nitride photonic crystal, with cavity modes in the visible range. We demonstrate a noninvasive method to characterize the cavities: the sample is illuminated on its edge and the upward-scattering spectrum is measured. We determine the modes' wavelengths, polarizations, and quality factors. We find modes between 700 and 830 nm with quality factors up to 280, polarized along or perpendicular to the cavity. The tuning of the cavity characteristics by means of its geometric parameters (holes sizes and shift) is discussed. The results are analyzed and compared with numerical simulations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fracture Mechanics Testing of Titanium 6AL-4V in LMP-103S Propellant

Propellant tank safe-life analysis is a spacecraft propulsion subsystem Launch Range processing requirement. The material property inputs for the safe-life analysis include the stress intensity factor for environment-assisted cracking (KEAC). The KEAC for titanium alloy Ti 6Al-4V in LMP-103S propellant was determined experimentally using an innovative test method following ASTM E1681, Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials. This effort was a collaboration between NASA Goddard Space Flight Center and NASA Kennedy Space Center to expose the test specimens in the propellant, while loaded in the test fixtures, for 1000- hour (42 days) at 50°C. Two test rounds have been completed to date; 1) testing mechanically loaded specimens but without propellant and 2) testing mechanically loaded specimens wetted with LMP-103S propellant. The dry test was to evaluate the crack growth without exposure to the LMP-103S propellant, and further assess the un-wetted stress intensity factor for the full 1000-hour duration. The second round of testing included the propellant soak for the requisite 1000- hour at 50°C. Current results show that the threshold intensity factor for environment-assisted cracking (exposed to LMP103S) is 22.5 ksi√in for the bulk material and 36. 2 ksi√in for the weld material. A generic ‘candidate’ tank geometry and material thickness is developed for a damage tolerance of known surface cracks below the nondestructive inspection technique detection limit. Evaluations with and without the use of a threshold intensity factor for environment-assisted cracking is performed for the required 4x propellant tank service life using the software tool NASGRO. SP2024_00239

Green propulsion↗

Preliminary Analysis of an Oscillating Surge Wave Energy Converter with Controlled Geometry: Preprint

The aim of this paper is to present a novel wave energy converter device concept that is being developed at the National Renewable Energy Laboratory. The proposed concept combines an oscillating surge wave energy converter with active control surfaces. These active control surfaces allow for the device geometry to be altered, which leads to changes in the hydrodynamic properties. The device geometry will be controlled on a sea state time scale and combined with wave-to-wave power-take-off control to maximize power capture, increase capacity factor, and reduce design loads. The paper begins with a traditional linear frequency domain analysis of the device performance. Performance sensitivity to foil pitch angle, the number of activated foils, and foil cross section geometry is presented to illustrate the current design decisions; however, it is understood from previous studies that modeling of current oscillating wave energy converter designs requires the consideration of nonlinear hydrodynamics and viscous drag forces. In response, a nonlinear model is presented that highlights the shortcomings of the linear frequency domain analysis and increases the precision in predicted performance.

17 WIND ENERGY↗

2D/3D image charge for modeling field emission

Analytic image charge approximations exist for planar and spherical metal surfaces but approximations for more complex geometries, such as the conical and wirelike structures characteristic of field emitters, are lacking. Such models are the basis for the evaluation of Schottky lowering factors in equations for current density. The development of a multidimensional image charge approximation, useful for a general thermal-field emission equation used in space charge studies, is given and based on an analytical model using a prolate spheroidal geometry. A description of how the model may be adapted to be used with a line charge model appropriate for carbon nanotube and carbon fiber field emitters is discussed. [http://dx.doi.org/10.1116/1.4968007]

47 OTHER INSTRUMENTATION↗

Permeability of vesicular Stromboli basaltic glass: Lattice Boltzmann simulations and laboratory measurements

The permeabilities of vesicular Stromboli basaltic glasses were determined using lattice Boltzmann (LB) simulations and laboratory measurements. Lattice Boltzmann simulations were performed to simulate flow through vesicular Stromboli basaltic glasses with porosities, {phi}, from 5% to 92%. The simulations and measurements provide a power law Darcian permeability-porosity relationship k(Phi) = c ({phi}){sup 5} with c = 2.35 x 10{sup -20} from LB simulations and 5.33 x 10{sup -21} from measurements, where k is in m{sup 2}. These permeabilities of vesiculated basalts are about 1 to 2 orders of magnitude higher than in rhyolitic and dacitic volcanic rocks with the same porosity; this difference is attributed to a higher bubble interconnectivity and larger bubble apertures in our basaltic samples. The Darcian flow permeability k{sub 1} (m{sup 2}) and non-Darcian flow permeability k{sub 2} (m) are highly dependent on bubble size, D, and porosity with k{sub 1} = 7.66 x 10{sup -17}[D{sup 2{phi}3}/(1 - {phi}){sup 2}] and k{sub 2} = 2.78 x 10{sup -9}[D{phi}{sup 3}/(1 - {phi})]. Samples with power law bubble size distributions can produce higher permeabilities than samples with exponential bubble size distributions. The Darcian and non-Darcian flow regimes are delineated, demonstrating that the Darcian flow occurs at the Forchheimer number, Fo, below 0.2-1, and the transitional flow (Forchheimer flow) occurs in the Forchheimer number range 1 to 10. The correlations between friction factor, f{sub k}, and Fo are constrained by the permeability measurements, and are in good agreement with simulations: f{sub k} = (1.11 {+-} 0.17) + [(0.66 {+-} 0.39)/Fo] (measurements) and f{sub k} = (0.59 {+-} 0.49) + [(1.0 {+-} 0.01)/Fo] (LB simulations). Our results show that f{sub k} depends on k{sub 2}, pore size, and pore geometry at small Fo and tends to be a constant at large Fo. The f{sub k} - Fo correlations imply a gradual transition from Darcian to non-Darcian flow, rather than an abrupt change. Modeling the relationship between permeability created by water exsolution and depth suggests that significant increases of permeability occur at depths of {approx}100-2000 m for melts with initial water concentrations of 1-4 wt %. At these depths, for gas flow through vesicular magma with a velocity 0.1-1 m s{sup -1}, Fo is in the range {approx}0.5-47, corresponding to the transitional flow regime. For a gas flow with a velocity over {approx}10 m s{sup -1}, Fo can attain values well above the transition flow regime. Our results imply that transitional flow or turbulent flow probably prevails in vesicular magma.

58 GEOSCIENCES↗

Organic scintillation detector response simulation using non-analog MCNPX-PoliMi

Organic liquid scintillation detectors are valuable for the detection of special nuclear material since they are capable of detecting both neutrons and gamma rays. Scintillators can also provide energy information which is helpful in identification and characterization of the source. In order to design scintillation based measurement systems appropriate simulation tools are needed. MCNPX-PoliMi is capable of simulating scintillation detector response; however, simulations have traditionally been run in analog mode which leads to long computation times. In this paper, non-analog MCNPX-PoliMi mode which uses variance reduction techniques is applied and tested. The non-analog MCNPX-PoliMi simulation test cases use source biasing, geometry splitting and a combination of both variance reduction techniques to efficiently simulate pulse height distribution and then time-of-flight for a heavily shielded case with a {sup 252}Cf source. An improvement factor (I), is calculated for distributions in each of the three cases above to analyze the effectiveness of the non-analog MCNPX-PoliMi simulations in reducing computation time. It is found that of the three cases, the last case which uses a combination of source biasing and geometry splitting shows the most improvement in simulation run time for the same desired variance. For pulse height distributions speedup ranging from a factor 5 to 25 is observed, while for time-of-flights the speedup factors range from 3 to 10. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Factorization Machine‐Based Active Learning for Functional Materials Design with Optimal Initial Data

The optimization of functional materials is important to enhance their properties, but their complex geometries pose great challenges to optimization. Data-driven algorithms efficiently navigate such complex design spaces by learning relationships between material structures and performance metrics to discover high-performance functional materials. Surrogate-based active learning, continually improving its surrogate model by iteratively including high-quality data points, has emerged as a cost-effective data-driven approach. Furthermore, it can be coupled with quantum computing to enhance optimization processes, especially when paired with a special form of surrogate model (i.e., quadratic unconstrained binary optimization), formulated by factorization machine (FM). However, current practices often overlook the variability in design space sizes when determining the initial data size for optimization. In this work, we investigate the optimal initial data sizes required for efficient convergence across various design space sizes. By employing averaged piecewise linear regression, we identify initiation points where convergence begins, highlighting the crucial role of employing adequate initial data in achieving efficient optimization. These results contribute to the efficient optimization of functional materials by ensuring faster convergence and reducing computational costs in FM-based active learning.

active learning↗