Search NASA⌕ Search

SEARCH · Search NASA

Results for “gradient structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

The Orbital Acceleration Research Experiment

The hardware and software of NASA's proposed Orbital Acceleration Research Experiment (OARE) are described. The OARE is to provide aerodynamic acceleration measurements along the Orbiter's principal axis in the free-molecular flow-flight regime at orbital attitude and in the transition regime during reentry. Models considering the effects of electromagnetic effects, solar radiation pressure, orbiter mass attraction, gravity gradient, orbital centripetal acceleration, out-of-orbital-plane effects, orbiter angular velocity, structural noise, mass expulsion signal sources, crew motion, and bias on acceleration are examined. The experiment contains an electrostatically balanced cylindrical proofmass accelerometer sensor with three orthogonal sensing axis outputs. The components and functions of the experimental calibration system and signal processor and control subsystem are analyzed. The development of the OARE software is discussed. The experimental equipment will be enclosed in a cover assembly that will be mounted in the Orbiter close to the center of gravity.

Blanchard, R. C.↗
NASA NTRS1986

Dual-spacecraft measurements of plasmasphere-ionosphere coupling

An extensive set of plasmaspheric measurements by the DE 1 satellite and ionospheric measurements by the DE 2 satellite are presented. The developments in the ionosphere and plasmasphere during the recovery phase of a magnetospheric storm are described. Isolated profile comparisons are used to indicate some of the structural relations and complexities involving the ionosphere and plasmasphere latitudinal profiles. A transition in the ionospheric electron temperature Te from a relatively smooth profile of low Te at the base of the inner plasmasphere to enhanced and highly structured Te at higher invariant latitudes occurs near or along a plasmaspheric density gradient. Plasmaspheric enhancements of the heavy ions O(+) and O(2+) are often closely aligned with distinct ionospheric Te enhancements.

Horwitz, J. L.↗
NASA NTRS1989

Microbial trace fossils in Antarctica and the search for evidence of early life on Mars

It is possible to hypothesize that, if microbial life evolved on early Mars, fossil remnants of these organisms may be preserved on the surface. However, the cooling and drying of Mars probably resembled a cold desert and such an environment is not suitable for the process of fossilization. The frigid Ross Desert of Antarctica is probably the closest terrestrial analog to conditions that may have prevailed on the surface of the cooling and drying Mars. In this desert, cryptoendolithic microbial communities live in the airspaces of porous rocks, the last habitable niche in a hostile outside environment. The organisms produce characteristic chemical and physical changes in the rock substrate. Environmental changes (deterioration of conditions) may result in the death of the community. Although no cellular structures are fossilized, the conspicuous changes in the rock substrate are preserved as trace fossils. Likewise, microbial trace fossils (without cellular structures) may also be preserved on Mars: Discontinuities in structure or chemistry of the rock that are independent of physical or chemical gradients may be of biological origin. Ross Desert trace fossils can be used as a model for planning search strategies and for instrument design to find evidence of past Martian life.

Friedmann, E. Imre↗
NASA NTRS1992

Global energy transports and the influence of clouds on transport requirements - A satellite analysis

This report investigates the impact of differential net radiative heating on 2D energy transports within the atmosphere ocean system and the role of clouds on this process. The 2D mean energy transports, in answer to zonal and meridional gradients in the net radiation field, show an east-west coupled dipole structure in which the Pacific acts as the major energy source and North Africa as the major energy sink. It is demonstrated that the dipole is embedded in the secondary energy transports arising mainly from the differential heating between land and oceans in the tropics in which the tropical east-west (zonal) transports are up to 30 percent of the tropical north-south (meridional) transports.

Sohn, Byung-Ju↗
NASA NTRS1992

Moessbauer spectroscopy of Mg(0.9)Fe(0.1)SiO3 perovskite

Ambient pressure Moessbauer spectra of Mg(0.9)Fe-57(0.1)SiO3 perovskite synthesized at pressure-temperature conditions of about 50 GPa and 1700 K show that the iron is entirely high-spin Fe(2+) and appears to be primarily located in the octahedral site within the crystal structure. We observe broad Moessbauer lines, suggesting a distribution of electric-field gradients caused by disorder associated with the Fe ions. Also, the perovskite exhibits magnetic ordering at temperatures lower than 5 K, implying that there is a magnetic contribution to the absolute ('third-law') entropy of this phase.

Jeanloz, Raymond↗
NASA NTRS1997

High performance thermoelectric materials and methods of preparation

Transition metals (T) of Group VIII (Co, Rh and Ir) have been prepared as semiconductor alloys with Sb having the general formula TSb.sub.3. The skutterudite-type crystal lattice structure of these semiconductor alloys and their enhanced thermoelectric properties results in semiconductor materials which may be used in the fabrication of thermoelectric elements to substantially improve the efficiency of the resulting thermoelectric device. Semiconductor alloys having the desired skutterudite-type crystal lattice structure may be prepared in accordance with the present invention by using vertical gradient freeze techniques, liquid-solid phase sintering techniques, low temperature powder sintering and/or hot-pressing. Measurements of electrical and thermal transport properties of selected semiconductor materials prepared in accordance with the present invention, demonstrated high Hall mobilities (up to 8000 cm.sup.2.V.sup.-1.s.sup.-1), good Seebeck coefficients (up to 400 .mu.VK.sup.-1 between 300.degree. C. and 700.degree. C.), and low thermal conductivities (as low as 15 mW/cmK). Optimizing the transport properties of semiconductor materials prepared from elemental mixtures Co, Rh, Ir and Sb resulted in a two fold increase in the thermoelectric figure of merit (ZT) at temperatures as high as 400.degree. C. for thermoelectric elements fabricated from such semiconductor materials.

Fleurial, Jean-Pierre↗
NASA NTRS2007

Interannual Variability of Boreal Summer Rainfall in the Equatorial Atlantic

Tropical Atlantic rainfall patterns and variation during boreal summer [June-July-August (JJA)] are quantified by means of a 28-year (1979-2006) monthly precipitation dataset from the Global Precipitation Climatology Project (GPCP). Rainfall variability during boreal spring [March-April-May (MAM)] is also examined for comparison in that the most intense interannual variability is usually observed during this season. Comparable variabilities in the Intertropical Convergence Zone (ITCZ) strength and the basin-mean rainfall are found during both seasons. Interannual variations in the ITCZ's latitudinal location during JJA however are generally negligible, in contrasting to intense year-to-year fluctuations during MAM. Sea surface temperature (SST) oscillations along the equatorial region (usually called the Atlantic Nino events) and in the tropical north Atlantic (TNA) are shown to be the two major local factors modulating the tropical Atlantic climate during both seasons. During MAM, both SST modes tend to contribute to the formation of an evident interhemispheric SST gradient, thus inducing anomalous shifting of the ITCZ and then forcing a dipolar structure of rainfall anomalies across the equator primarily in the western basin. During JJA the impacts however are primarily on the ITCZ strength likely due to negligible changes in the ITCZ latitudinal location. The Atlantic Nino reaches its peak in JJA, while much weaker SST anomalies appear north of the equator in JJA than in MAM, showing decaying of the interhemispheric SST mode. SST anomalies in the tropical central-eastern Pacific (the El Nino events) have a strong impact on tropical Atlantic including both the tropical north Atlantic and the equatorial-southern Atlantic. However, anomalous warming in the tropical north Atlantic following positive SST anomalies in the tropical Pacific disappears during JJA because of seasonal changes in the large-scale circulation cutting off the ENSO influence passing through the mid-latitudes. Hence the anomalies associated with the tropical Pacific during JJA are forced through an anomalous Walker circulation primarily working on the western basin, and likely a lagged oceanic response in the equatorial region.

Gu, Guojun↗
NASA NTRS2019

Load Flow Analysis with Analytic Derivatives for Electric Aircraft Design Optimization

Many of the aircraft concepts of the future are exploring the use of hybrid-, turbo- or all-electric propulsion systems to improve performance and decrease environmental impacts. These aircraft concepts range from small rotorcraft for urban air mobility to conventional commercial transports to large blended wing body designs. Developing the conceptual design for these vehicles presents a challenge, however, as traditional aircraft design tools often were not developed to handle these unique propulsion system architectures. Previous studies on these vehicles have therefore relied on relatively simple models of the electrical transmission and distribution system. This paper presents the development of a hybrid AC-DC load flow (or power flow) analysis capability to enhance the conceptual design of these concept vehicles. Specifically, the desire was to create a load flow analysis capability within the OpenMDAO framework that is also being used to develop a set of compatible tools for rapid optimization of conceptual designs. This load flow analysis capability is unique in its flexible object-oriented structure and implementation of analytic derivatives to facilitate the use of solvers and gradient based optimization in the design process. The developed hybrid load flow analysis capability is first verified against a published 13-bus example then used to model the electrical distribution system for a turbo-electric tiltwing aircraft.

Load flow↗
NASA NTRS2019

Decadal-Scale Vegetation Change Driven by Salinity at Leading Edge of Rising Sea Level

As sea levels rise, low-lying coastal forests increasingly are subject to stressors such as inundation and saltwater exposure. At long timescales (for example, centuries), the extent of inundation and saltwater exposure will increase; however, on a decadal timescale, the role of these drivers may differ in both magnitude and direction. To investigate the drivers of decadal-scale vegetation change, we measured the changes in five metrics of vegetation composition and structure between 2003/2004 and 2016/ 2017 at 98 plots distributed across a vegetation gradient from coastal forest to brackish marshes (< 0.5–18 ppt). We used elevation as a proxy of inundation vulnerability and soil sodium concentration as a proxy of saltwater exposure, and we investigated relationships between these two variables and the change in vegetation conditions between the two sampling periods. Soil sodium concentration was a significant predictor of vegetation change for all five vegetation metrics, whereas the effect of elevation was not significant for any of the metrics. The one site that was affected by wildfire twice during the duration of the study shifted almost completely from forest to marsh with limited regeneration ofwoody vegetation observed in 2016/ 2017. Our results show that salinization in our system is a more important driver of vegetation change than inundation potential. Furthermore, the effects of drought-induced salinization could be amplified by the elevated risk of wildfire during droughts. Forecasting the response of coastal wetlands to rising sea levels will require a better understanding of the individual and combined effects of salinity, droughts, and wildfires on vegetation.

Taillie, Paul J.↗
NASA NTRSDate not supplied

Evaluation of the LOFTID Flight Thermocouple Measurements

The Flexible Thermal Protection System (FTPS) on NASA’s Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) vehicle was instrumented with thermocouples (TC) to measure the in-depth thermal response during entry into Earth’s atmosphere. Accurate flight temperature measurements are critical for verifying vehicle performance during the flight test and reducing uncertainties in the thermal models. The deployable nature of inflatable decelerator technology presents challenges, namely the TCs need to be compactable, cannot damage the FTPS nor the inflatable structure, and need to be able to withstand high temperatures and large thermal gradients over significant running lengths. As previously reported, an extensive ground-test campaign was conducted prior to flight to inform the selection of the LOFTID FTPS TCs which minimized all known potential error sources. Overall, the resulting flight FTPS TC measurements were exceptionally clean throughout the atmospheric entry heat pulse. However, a few of the FTPS TCs still exhibited electrical shorting or other anomalous behavior. This paper presents the flight measurements made by the LOFTID FTPS TCs, identifies anomalous behavior, and discusses potential explanations for the causes of the anomalous behavior. Lastly, recommendations to further mitigate TC measurement error on future Hypersonic Inflatable Aerodynamic Decelerator (HIAD) missions are provided.

Ruth A Miller↗
NASA NTRS2024

Radiant Heater Test Facility (RHTF) NASA Johnson Space Center

The RHTF provides the capability to perform multizone, high-temperature radiant testing of large spacecraft TPS and associated structures in a controlled pressure environment to simulate reentry thermal profiles and thermal gradients.

Tien Nguyen↗
NASA NTRS2019

MMS Measurements of the Vlasov Equation: Probing the Electron Pressure Divergence Within Thin Current Sheets

We investigate the kinetic structure of electron-scale current sheets found in the vicinity of the magnetopause and embedded in the magnetosheath within the reconnection exhaust. A new technique for computing terms of the Vlasov equation using Magnetospheric Multiscale (MMS) measurements is presented and applied to study phase space density gradients and the kinetic origins of the electron pressure divergence found within these current sheets. Crescent-shaped structures in ∇(⟂2)f(e) give rise to bipolar and quadrupolar signatures in v · ∇f(e) measured near the maximum ∇ · P(e) inside the current layers. The current density perpendicular to the magnetic field is strong (J⟂ ∼2 μA/sq.m), and the thickness of the current layers ranges from 3 to 5 electron inertial lengths. The electron flows supporting the current layers mainly result from the combination of E × B and diamagnetic drifts. We find nonzero J · E′ within the current sheets even though they are observed apart from typical diffusion region signatures.

Shuster, J. R.↗
NASA NTRS2026

Improvement in the Thermal-to-Structural Model Mapping Process for Integrated Modeling for the Roman Space Telescope

Integrated Modeling has been a key component of verifying optical requirements for the Nancy Grace Roman Space Telescope (RST) that are either impossible or impractical to verify exclusively through ground testing. Two major areas for integrated Modeling are Jitter and Thermal Distortion that require the exchanges of model performance predictions across disciplines. In both cases, distortions are impressed on optical models to evaluate the impact on boresight alignment and wave front error. In the case of Jitter, the disturbances are driven by reactions to motions most often from actuators; however, in the case of thermal distortion, the motions are driven by thermal expansion or contraction as a result of changing temperatures. This then requires a link further upstream to the thermal model, which is used to predict the thermal performance and temperature gradients and stability. The process for mapping temperatures from a thermal model to a corresponding structural model has been performed numerous times through the RST project lifecycle, with improvements in the accuracy, verification, and effort sought throughout. This paper describes some of the recent improvements to the process, including: capture of the visualization parameters, automatic generation of the mapped images for both the thermal and structural model groupings, and reduction in the effort to assemble the full set of mapped temperatures. These upgrades have greatly reduced the manual effort associated with thermal mapping and allowed for faster turn-around of Integrated Modeling predictions.

Thermal Mapping↗
NASA NTRS2006

Thermal Management Techniques for Oil-Free Turbomachinery Systems

Tests were performed to evaluate three different methods of utilizing air to provide thermal management control for compliant journal foil air bearings. The effectiveness of the methods was based on bearing bulk temperature and axial thermal gradient reductions during air delivery. The first method utilized direct impingement of air on the inner surface of a hollow test journal during operation. The second, less indirect method achieved heat removal by blowing air inside the test journal to simulate air flowing axially through a hollow, rotating shaft. The third method emulated the most common approach to removing heat by forcing air axially through the bearing s support structure. Internal bearing temperatures were measured with three, type K thermocouples embedded in the bearing that measured general internal temperatures and axial thermal gradients. Testing was performed in a 1 atm, 260 C ambient environment with the bearing operating at 60 krpm and supporting a load of 222 N. Air volumetric flows of 0.06, 0.11, and 0.17 cubic meters per minute at approximately 150 to 200 C were used. The tests indicate that all three methods provide thermal management but at different levels of effectiveness. Axial cooling of the bearing support structure had a greater effect on bulk temperature for each air flow and demonstrated that the thermal gradients could be influenced by the directionality of the air flow. Direct air impingement on the journal's inside surface provided uniform reductions in both bulk temperature and thermal gradients. Similar to the direct method, indirect journal cooling had a uniform cooling effect on both bulk temperatures and thermal gradients but was the least effective of the three methods.

Radil, Kevin↗
DOE OSTI2022

Decoupling of greenness and gross primary productivity as aridity decreases

Ecosystem primary productivity is a key ecological process influencing many ecosystem services, including carbon storage. Thus, clarifying how primary productivity in terrestrial ecosystems responds to climatic variability can reveal key mechanisms that will drive future changes in the global carbon budget. Satellite products of canopy greenness are widely used as proxies for vegetation productivity to evaluate how ecosystems respond to climate variability. However, to what degree inter-annual variations in productivity are consistent with greenness and how this relationship varies spatially remains unclear. Here we investigated the strength of the coupling between inter-annual variations in leaf area index (LAI, a measure of greenness) and ecosystem gross primary productivity (GPP) derived from eddy covariance towers, i.e., the r2 of the LAI-GPP relationship. Overall, inter-annual GPP and LAI were highly coupled (i.e., high r2) in arid grasslands, but were fully decoupled in mesic evergreen broadleaf forests, indicating that this relationship varies strongly along aridity gradients. A possible mechanism of the spatial variation in the LAI-GPP relationship is that the tradeoff between ecosystem structure (LAI) and physiology (photosynthesis per unit leaf area) becomes stronger in more humid climates. Land models overestimated the r2 of LAI-GPP correlation for most ecosystem types and failed to capture the spatial pattern along aridity gradients. We conclude that relying on greenness products for evaluating inter-annual changes in vegetation productivity may bias assessments, especially in tropical rainforest ecosystems. Our findings may also reconcile observed disparities between responses in greenness and GPP during drought in Amazon forests.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1993

The structure of three-dimensional convection beneath oceanic spreading centres

The combined effects of buoyancy forces due to thermal expansion and compositional gradients in the mantle beneath spreading centers have been investigated in a series of numerical experiments. Compositional buoyancy leads to three-dimensional flow beneath the spreading axis, with along-axis variations in upwelling and melt production. Thermal buoyancy drives upwelling beneath the axis and convective overturn, which forms rolls aligned perpendicular to the spreading axis. The distance from the axis at which these rolls form is controlled by the spreading rate, mantle viscosity, and relative strength of compositional buoyancy. Implications of the results for the spreading center structure are examined.

Sparks, David W.↗
NASA NTRS1982

Structural analysis

Hot section components of aircraft gas turbine engines are subjected to severe thermal-structural loading conditions, especially during the start-up and take-off portions of the engine cycle. The most severe and damaging stresses and strains are those induced by the steep thermal gradients induced during the start-up transient. These transient stresses and strains are also the most difficult to predict, in part because the temperature gradients and distributions are not well known or predictable, and also because the cyclic elasto-viscoplastic behavior of the materials at these extremes of temperature and strain are not well known or predictable. One element of the structures program will develop improved time-varying thermal-mechanical load models for the entire engine mission cycle from start-up to shutdown. The thermal model refinements will be consistent with those required by the structural code including considerations of mesh-point density, strain concentrations, and thermal gradients. Models will be developed for the burner liner, turbine vane and turbine blade.

Johns, R. H.↗
DOE OSTI2022

20%-efficient polycrystalline Cd(Se,Te) thin-film solar cells with compositional gradient near the front junction

Bandgap gradient is a proven approach for improving the open-circuit voltages (V OC s) in Cu(In,Ga)Se 2 and Cu(Zn,Sn)Se 2 thin-film solar cells, but has not been realized in Cd(Se,Te) thin-film solar cells, a leading thin-film solar cell technology in the photovoltaic market. Here, we demonstrate the realization of a bandgap gradient in Cd(Se,Te) thin-film solar cells by introducing a Cd(O,S,Se,Te) region with the same crystal structure of the absorber near the front junction. The formation of such a region is enabled by incorporating oxygenated CdS and CdSe layers. We show that the introduction of the bandgap gradient reduces the hole density in the front junction region and introduces a small spike in the band alignment between this and the absorber regions, effectively suppressing the nonradiative recombination therein and leading to improved VOCs in Cd(Se,Te) solar cells using commercial SnO 2 buffers. A champion device achieves an efficiency of 20.03% with a V OC of 0.863 V.

14 SOLAR ENERGY↗