Search NASA⌕ Search

SEARCH · Search NASA

Results for “height function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Correcting X-ray spectra obtained from the AXAF VETA-I mirror calibration for pileup, continuum, background and deadtime

The VETA-I mirror was calibrated with the use of a collimated soft X-ray source produced by electron bombardment of various anode materials. The FWHM, effective area and encircled energy were measured with the use of proportional counters that were scanned with a set of circular apertures. The pulsers from the proportional counters were sent through a multichannel analyzer that produced a pulse height spectrum. In order to characterize the properties of the mirror at different discrete photon energies one desires to extract from the pulse height distribution only those photons that originated from the characteristic line emission of the X-ray target source. We have developed a code that fits a modeled spectrum to the observed X-ray data, extracts the counts that originated from the line emission, and estimates the error in these counts. The function that is fitted to the X-ray spectra includes a Prescott function for the resolution of the detector a second Prescott function for a pileup peak and a X-ray continuum function. The continuum component is determined by calculating the absorption of the target Bremsstrahlung through various filters, correcting for the reflectivity of the mirror and convolving with the detector response.

Chartas, G.↗
NASA NTRS1998

Laser pointing determination for the geoscience laser altimeter system

The Geoscience Laser Altimeter System (GLAS) is a space-based lidar being developed to monitor changes in the mass balance of the Earth's polar ice sheets (Thomas et al. 1985). GLAS is part of NASA's Earth Observing System (Schutz 1995), and is being designed to launch into a 600 km circular polar orbit in the year 2001, for continuous operation over 3 to 5 years. The orbit's 94 degree inclination has been selected to allow good coverage and profile patterns over the ice sheets of Greenland and Antarctica. The GLAS mission uses a small dedicated spacecraft provided by Ball Aerospace, which is required to have a very stable nadir and zenith pointing platform which points to within approximately 100 urad (20 arcseconds) of Nadir. Accurate knowledge of the laser beam's pointing angle (in the far field) is critical since pointing the laser beam away from nadir biases the altimetry measurements (Gardner 1992, Bufton et al. 1991). This error is a function of the distance of the laser centroid off nadir multiplied by the orbit altitude and the tangent of the slope angle of the terrain. Most of the ice sheet surface slopes are less than 1? resulting in pointing knowledge bias of only 7.6 cm with 7.3 urad accuracy, and overall single shot height accuracy of approximately 15 cm. However, over a 3 deg surface slope pointing knowledge to approximately 7.3 urad is the largest error source (23 cm) in achieving 26 cm height accuracy. The GLAS design incorporates a stellar reference system (SRS) to relate the laser beam pointing angle to the star field to an accuracy of 7.3 urad. The stellar reference system combines an attitude determination system (ADS) operating from 4 to 10 Hz coupled to a 40 Hz laser reference system (LRS) to perform this task.

Miller, Pamela S.↗
NASA NTRS2010

Concentric Nested Toroidal Inflatable Structures

Assemblies comprising multiple limited- height toroidal inflatable structures nested in a concentric arrangement have been invented to obtain more design flexibility than can be obtained in single taller, wider toroidal inflatable structures (see figure). Originally intended for use as containers for habitats for humans in outer space or on remote planets, these and related prior inflatable structures could also be useful on Earth as lightweight, compactly stowable, portable special-purpose buildings that could be transported to remote locations and there inflated to full size and shape. In the case of a single inflatable toroidal structure, one important source of lack of design flexibility is the fact that an increase in outer diameter (which is sometimes desired) is necessarily accompanied by an increase in height (which is sometimes undesired). Increases in diameter and height can also cause difficulty in utilization of the resulting larger volume, in that it can become necessary to partition the volume by means of walls and floors, and features (e.g., stairs or ladders) must be added to enable vertical movement between floors. Moreover, ascending and descending between floors in a gravitational environment could pose unacceptable difficulty for the inhabitants under some circumstances. Another source of lack of design flexibility in a single toroidal inflatable structure is that for a given inflation pressure, an increase in the outer diameter of the structure necessarily entails an increase in the maximum stress in the structure. Because it is necessary to keep the maximum stress within the load-bearing capability of the structural materials, consistent with other aspects of the design, this may translate to a limit on the outer diameter. In an assembly comprising concentric nested toroidal structures, an increase in outer diameter does not necessarily entail an increase in height or a maximum stress in excess of the load-bearing capability of the structural materials. The minor diameters of the nested toroid can be chosen to partition interior spaces optimally, without necessitating the addition of walls or floors. Inasmuch as the maximum stress in a nested inflatable toroidal structure is a function of its minor diameter and the minor diameter is typically small enough that the load-bearing capability of the structural materials is not exceeded, there is no longer a limit on the outer diameter of the assembly: instead, the assembly can be expanded, without limit, by simply adding concentric inflatable toroidal structures having suitable minor diameters and successively larger major diameters. The minor diameters need not be equal:

Johnson, Christopher J.↗
NASA NTRS2001

Comparison of a space shuttle flight (STS-78) and bed rest on human muscle function

The purpose of this investigation was to assess muscle fiber size, composition, and in vivo contractile characteristics of the calf muscle of four male crew members during a 17-day spaceflight (SF; Life and Microgravity Sciences Spacelab Shuttle Transport System-78 mission) and eight men during a 17-day bed rest (BR). The protocols and timelines of these two investigations were identical, therefore allowing for direct comparisons between SF and the BR. The subjects' age, height, and weight were 43 +/- 2 yr, 183 +/- 4 cm, and 86 +/- 3 kg for SF and 43 +/- 2 yr, 182 +/- 3 cm, and 82 +/- 4 kg for BR, respectively. Calf muscle strength was examined before SF and BR; on days 2, 8, and 12 during SF and BR; and on days 2 and 8 of recovery. Muscle biopsies were obtained before and within 3 h after SF (gastrocnemius and soleus) and BR (soleus) before reloading. Maximal isometric calf strength and the force-velocity characteristics were unchanged with SF or BR. Additionally, neither SF nor BR had any effect on fiber composition or fiber size of the calf muscles studied. In summary, no changes in calf muscle strength and morphology were observed after the 17-day SF and BR. Because muscle strength is lost during unloading, both during spaceflight and on the ground, these data suggest that the testing sequence employed during the SF and BR may have served as a resistance training countermeasure to attenuate whole muscle strength loss.

Non-NASA Center↗
NASA NTRS1979

Seasat visible and infrared radiometer

The visual and infrared radiometer (VIRR) system on Seasat is described, and methods used in the geophysical evaluation of digital data from this system are discussed. The main function of the radiometer system is to provide images of visual reflection and thermal infrared emission from ocean, coastal and atmospheric features to facilitate interpretation of data from other Seasat sensors; in addition, it is expected to provide some derived quantitative measurements of such factors as sea-surface temperature and cloud-top height. Some results of a statistical comparison of Seasat VIRR-derived sea-surface temperatures in a cloud-free region with a National Oceanic and Atmospheric Administration (NOAA) analysis based on surface measurements made in the same region are presented. The data sets were in agreement of plus or minus 1.7 deg K root-mean-square. The means of the two sets of temperatures were 293.9 deg K (VIRR) and 293.1 deg K (NOAA), and the standard deviations were 3.21 deg and 3.2 deg K, respectively.

Mcclain, E. P.↗
NASA NTRS1984

Radar analyses of mesoscale meteorological phenomena during the AVE/VAS correlation field experiment

Radar data were collected during the selected critical times of the field experiment and subsequently analyzed for specific items. The analyses of the radar data for the AVE/VAS experiment provided statistically significant values for each of the 10 Km by 10 Km grids within radar range. The resulting information for correlation with satellite data included the following derived items that were averaged for each grid area: (1) rainfall rate in mm/hr; (2) dBZ (reflectivity) values; (3) accumulated rainfall values per hour; (4) accumulated rainfall values for a 6-hour period; (5) vertically integrated liquid water content per square meter; and (6) vertical height of the radar axis at the midpoint of each grid. Additional products derived from radar data are being investigated. An example of one such product is the derivation of the errors in integrated rainfall with different sampling periods. This is of significance for correlation with satellite data in that normally a step-function type of rainfall rate is used to derive the total rainfall over a period.

Huebner, G. L.↗
NASA NTRS1992

The cause of the coronal temperature inversion of the solar atmosphere and the implications for the solar wind

The energy contained in suprathermal tails at the base of the transition region is shown to be transformed into the rarefied, but hotter, transition region and low corona without any further addition of energy to the gas above the base of the transition region. Possible critical point location and asymptotic wind speed are shown to be controlled by the suprathermal tail strength parameter used to model possible suprathermal velocity distribution functions at the base of the transition region. This process shows promise for producing temperature profiles that peak near, but outside of, the fluid critical point without ad hoc energy deposition. The coronal temperature inversion above the solar photosphere is argued to be a generic feature around all stars with nonthermal distributions at the heights where the atmosphere last becomes mostly ionized.

Scudder, J. D.↗
NASA NTRS2000

Non-Tidal Non-Seasonal Oceanic Mass Redistribution Estimated from the TOPEX/Poseidon Observation

Topex/Poseidon altimetry data are used to estimate the non-tidal mass redistribution as a function of space-time. The goal is to study the contribution of ocean circulations in the geodynamic effects including Earth's rotational and gravitational variations. We examine the non-seasonal anomalies at monthly sampling rate over the T/P span of eight years, concentrating especially on interannual variabilities. Since the sea-surface height data obtained from altimetry is the combined effect of steric change (primarily thermal effect) and the mass flux, and because the former has zero contribution to the geodynamic effects, one needs to do a so-called steric correction by removing from the altimetry data the steric contributions. We achieve it using multiyear monthly sea-surface temperature maps, together with monthly "climatology" for mixed-layer depth maps for mean-months of the year. We analyze both sets of the altimetry data and the steric correction data using the empirical orthogonal function/principal component analysis (in which we take care of issues associated with the area-weighting and non-zero mean), and examine the most important modes, either globally or regionally. In particular, the ENSO in the tropical Pacific/Indian Oceans exhibits the most prominent pattern. The net mass transport after the steric correction can then be compared with: (1) ocean general circulation model outputs for the same period of time (such as from POCM-4B); (2) non-atmospheric Earth rotation variations obtained from space geodesy data and atmospheric angular momentum data; (3) non-atmospheric low-degree gravitational variations from satellite-laser-ranging observations and global atmospheric data.

Chao, Benjamin F.↗
NASA NTRS2005

Computational Study of Separating Flow in a Planar Subsonic Diffuser

A computational study of the separated flow through a 2-D asymmetric subsonic diffuser has been performed. The Wind Computational Fluid Dynamics code is used to predict the separation and reattachment behavior for an incompressible diffuser flow. The diffuser inlet flow is a two-dimensional, turbulent, and fully-developed channel flow with a Reynolds number of 20,000 based on the centerline velocity and the channel height. Wind solutions computed with the Menter SST, Chien k-epsilon, Spalart-Allmaras and Explicit Algebraic Reynolds Stress turbulence models are compared with experimentally measured velocity profiles and skin friction along the upper and lower walls. In addition to the turbulence model study, the effects of grid resolution and use of wall functions were investigated. The grid studies varied the number of grid points across the diffuser and varied the initial wall spacing from y(sup +) = 0.2 to 60. The wall function study assessed the applicability of wall functions for analysis of separated flow. The SST and Explicit Algebraic Stress models provide the best agreement with experimental data, and it is recommended wall functions should only be used with a high level of caution.

DalBello, Teryn↗
NASA NTRS2010

Atmospheric Delay Reduction Using KARAT for GPS Analysis and Implications for VLBI

We have been developing a state-of-the-art tool to estimate the atmospheric path delays by raytracing through mesoscale analysis (MANAL) data, which is operationally used for numerical weather prediction by the Japan Meteorological Agency (JMA). The tools, which we have named KAshima RAytracing Tools (KARAT)', are capable of calculating total slant delays and ray-bending angles considering real atmospheric phenomena. The KARAT can estimate atmospheric slant delays by an analytical 2-D ray-propagation model by Thayer and a 3-D Eikonal solver. We compared PPP solutions using KARAT with that using the Global Mapping Function (GMF) and Vienna Mapping Function 1 (VMF1) for GPS sites of the GEONET (GPS Earth Observation Network System) operated by Geographical Survey Institute (GSI). In our comparison 57 stations of GEONET during the year of 2008 were processed. The KARAT solutions are slightly better than the solutions using VMF1 and GMF with linear gradient model for horizontal and height positions. Our results imply that KARAT is a useful tool for an efficient reduction of atmospheric path delays in radio-based space geodetic techniques such as GNSS and VLBI.

Ichikawa, Ryuichi↗
NASA NTRS2019

Improved assessment of mangrove forests in Sundarbans East Wildlife Sanctuary using WorldView 2 and TanDEM-X high resolution imagery

Recent developments of remote sensing techniques which can capture both the structure and function of the ecosystem provide a more representative view of the landscape. These unique Earth observations were used to help improve traditional forestry surveys by providing species-specific land cover classes for mangrove forests in the Sundarbans East Wildlife Sanctuary. By combining optical data from WorldView2 (WV2; 2 m pixel) and a canopy height model derived using radar data from TanDEM-X (TDX; 12 m pixel), we identified nine mangrove and five non-mangrove classes by following an Iterative Self-Organizing Data Analysis Algorithm. Three dominant mangrove species accounted for nearly 50% of the sanctuary. Heritieria fomes disproportionately covered the largest area at 43%, overturning previous field-based estimates of Excoecaria agallocha dominance. E. agallocha and Sonneratia apetala, covered 3% and 1.47% of the sanctuary, respectively. Four mixed species classes were also identified with clear vegetation zonation patterns that trended toward species homogeneity with increasing distance from shore. The overall land cover accuracy (WV2: 89.33%; WV2-TDX: 89.89%), the Kappa Coefficient (WV2:0.88; WV2-TDX: 0.89) and change statistics between WV2 and WV2-TDX landcover classifications indicate that the WV2 imagery can separate mangrove community types without structural data. The combination of the land cover classifications and the canopy height model indicated that H. fomes were not only the most dominant forest but also, on average, the tallest (12.3 m) among the other eight mangrove types. Our large-scale mapping with high resolution optical and radar platforms can capture subtle changes in mangrove vegetation and canopy structural gradients more accurately and be used to monitor biodiversity changes and Aichi Biodiversity Targets and Indicators, which would contribute to biodiversity policy updating.

Md Mizanur Rahman↗
NASA NTRS2013

A Comparison Between Gravity Wave Momentum Fluxes in Observations and Climate Models

For the first time, a formal comparison is made between gravity wave momentum fluxes in models and those derived from observations. Although gravity waves occur over a wide range of spatial and temporal scales, the focus of this paper is on scales that are being parameterized in present climate models, sub-1000-km scales. Only observational methods that permit derivation of gravity wave momentum fluxes over large geographical areas are discussed, and these are from satellite temperature measurements, constant-density long-duration balloons, and high-vertical-resolution radiosonde data. The models discussed include two high-resolution models in which gravity waves are explicitly modeled, Kanto and the Community Atmosphere Model, version 5 (CAM5), and three climate models containing gravity wave parameterizations,MAECHAM5, Hadley Centre Global Environmental Model 3 (HadGEM3), and the Goddard Institute for Space Studies (GISS) model. Measurements generally show similar flux magnitudes as in models, except that the fluxes derived from satellite measurements fall off more rapidly with height. This is likely due to limitations on the observable range of wavelengths, although other factors may contribute. When one accounts for this more rapid fall off, the geographical distribution of the fluxes from observations and models compare reasonably well, except for certain features that depend on the specification of the nonorographic gravity wave source functions in the climate models. For instance, both the observed fluxes and those in the high-resolution models are very small at summer high latitudes, but this is not the case for some of the climate models. This comparison between gravity wave fluxes from climate models, high-resolution models, and fluxes derived from observations indicates that such efforts offer a promising path toward improving specifications of gravity wave sources in climate models.

mathematical models↗
NASA NTRS1981

Further observational support for the limited-latitude magnetodisc model of the outer Jovian magnetosphere

A distinction is made between the solar-wind-influenced limited-latitude magnetodisk and magnetic anomaly models of the outer Jovian magnetosphere, and an observational comparison of the two models is presented based on Pioneer and Voyager measurements. Predictions of the two models concerning the location of the current sheet as a function of Jovigraphic latitude, System III longitude and radial distance are contrasted, and it is shown that both models can satisfactorily explain the merging of the current sheep crossings by Voyager 1 and 2. Variations in the energetic particle intensities observed on the outbound pass of Voyager 1 and 2 are observed to correspond to scale heights for energetic particle latitudinal confinement consistent with MHD calculations and Pioneer 10 and Voyager magnetic observations only when the scale heights are calculated on the basis of the limited-latitude magnetodisk model. It is thus suggested that the solar wind must have a greater influence on magnetosphere structure than internal longitudinal plasma asymmetry.

Thomsen, M. F.↗
NASA NTRS1984

Electromagnetic bias of 36-GHz radar altimeter measurements of MSL

The data reduction techniques used to determine the magnitude of electromagnetic (EM) bias in radar altimeter measurements of mean sea level (MSL) area described. Particular attention is given to the bias reduction scheme developed specifically for the Surface Contour Radar (SCR) instrument of the Ocean Topography Experiment (TOPEX). The SCR makes it possible to determine the amount of the backscattered power due to EM reflectance per unit area by measuring both the return power and elevation. Variations of backscattered power for different sea states are determined as a function of displacement of the MSL. On the basis of the recent SCR observations from aircraft, a standard error due to EM bias is predicted for MSL measurements performed with a satellite altimeter radar operating at a frequency of 36 GHz. The obtained standard error was 1 percent for regions with waves 1.9-5.5 meters in height.

Walsh, E. J.↗
NASA NTRS1984

Diagnosing the severe thunderstorm environment by mesoscale cloud tracking - A new approach and new information

A new method for cloud tracking and observing storm development using satellite imagery in a cloud relative mode is presented. This method changes the analyst's function to one of monitoring cloud growth and changes over a finite time period and identifying portions of the cloud that are suitable for use as trackers. It is shown how many problems previously encountered by meteorologists in mesoscale cloud tracking can be overcome by using the cloud relative technique to determine mesoscale flow fields whose heights are determined using stereographic techniques. By separating growth and decay from cloud motion in a cumulus field using the method and accurately defining cloud heights, vertical wind shears within mesoscale domains may be defined. When this information is used to study the relative velocity of flows at different levels with respect to a developing or mature storm, improved insight into storm behavior can be achieved.

Purdom, J. F. W.↗
NASA NTRS1989

Diffusion of Si in thin CoSi2 layers

Evidence of silicon diffusion in 100-A CoSi2 layers grown by room-temperature codeposition and annealing on Si(111) substrates was from Auger peak height ratios, which were interpreted in terms of a Si overlayer. It was found that this layer could be removed by chemical etching and reformed by subsequent annealing. By measuring the intensity of the plasmon energy loss peak associated with the CoL23 VV Auger peak, the effective thickness of the Si overlayer was measured as a function of annealing temperature, by calibrating the plasmon loss data against known overlayer thicknesses on unannealed samples. Similar results were found for samples grown both with and without the addition of a 10-A Si cap to prevent pinhole formation in the CoSi2; moreover, Si diffusion was also observed at temperatures well below the point where pinhole formation is first found, suggesting that Si diffusion does not depend on the presence of observable pinholes.

Schowengerdt, F. D.↗
NASA NTRS1992

Gravitational spreading of high terrain in Ishtar Terra, Venus

A plane-strain viscoelastic finite element algorithm derived by Melosh and Rafesky (1980, 1983) is used to model the gravitational spreading of the high topography of Ishtar Terra. Brittle failure and relaxation of topographic relief are predicted as functions of time for ranges of crustal thickness and thermal gradient and for observed ranges in topographic elevation and slope. For a crustal thickness greater than 10 km, a thermal gradient of 15 K/km or more, and average values of relief (3 km) and slope (3 deg), the topography relaxes to 25 percent of its original height in less than 10 m.y. Although initial failure, in the form of normal faulting on the highlands and margin and occasional shallow thrusting in the lowlands, is predicted to occur much earlier, values of horizontal surface strain that are likely to be observable (about 1 percent) do not accumulate until significant relaxation of relief begins.

Smrekar, Suzanne E.↗
NASA NTRS1971

Density and flux distributions in the lunar atmosphere due to point and line sources

Apart from the globally distributed ambient gases in the lunar atmosphere, localized gas sources, such as volcanos, may have a measurable effect on the process of shaping the lunar atmosphere. Analytic solutions were obtained for the spatial distributions of neutral gas densities and fluxes due to point and line sources at the lunar surface. Both density and flux profiles are strong functions of the distance from the source to the point of observation. The study also reveals that: (1) The location of the source may be identified from the density and flux profiles. (2) If the gas species is known, the temperature of the gas may be determined from the density gradient at a distance of several scale heights from the source. (3) The strength of the gas source may be determined by the magnitudes of density and flux.

Yeh, T. T. J.↗