Search NASA⌕ Search

SEARCH · Search NASA

Results for “hematite”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

The role of geological surfaces in determining visible-near infra red spectral signatures

The goal of the study described here is to determine new criteria for improved target discrimination in areas of hydrothermal mineralization. It is noted that the portion of materials, that is, geological surfaces detected by sensing devices, must be accurately determined before elemental and mineralogical characterization. The depth from which visible-near infrared radiation is reflected from target surfaces depends on composition and fabric. Reflectance spectra are obtained from binary mixtures of hematite, goethite, kaolinite and montmorillonite with a reflecting sphere spectrometer over a wavelength range of 400-2500 nm. The reflection (or absorption) intensity is plotted vs. the sample thickness (determined by scanning electron microscopy) to determine the sample thickness at which absorption saturates. The optical depth is seen to vary as a function of mineralogy and wavelength. In general, the maximum depth from which reflection features are discerned is from 12 to 47 microns measured in the visible-near infrared spectral region.

Sommer, S. E.↗

The ilmenite/titano-magnetite assemblage - Kinetics of re-equilibration

The petrogenesis of igneous and metamorphic rocks is a function of several parameters. Of these, temperature and pressure are of particular importance. Information concerning these two parameters is obtained through the use of mineral indicators. One such commonly used geothermometer/oxybarometer is that involving ilmenite/titano-magnetite. Anomalously low temperatures have been reported in cases in which the geothermometer/oxybarometer was employed. The studies suggest that low temperatures result from slow cooling rates which allows the Fe-Ti oxides to re-equilibrate. The current investigation is mainly concerned with the kinetics of the reduction of ilmenite-hematite solid solution, since this is the slower and, consequently, rate-controlling step in the re-equilibration process. The reaction rates determined for the reduction of ilmenites in the investigation are geologically rapid and must be considered when applying the considered geothermometer/oxybarometer.

Hammond, P. A.↗

Mars: Definition and characterization of global surface units with emphasis on composition

Viking 2 approach maps of red and violet normal albedo are used to define units of similar optical properties for a large area of the Martian surface. Computer processing of these data reveals clusters of albedo values relating to specific, contiguous regions of the planet, with some unit boundaries being of a gradational nature while others are more discrete. A study of the albedo properties of analog materials measured in the laboratory, and of telescopic spectrophotometry of Mars, indicates that both hydroxylated and hematitic oxidized materials exist on the surface. The most probable surface expression of global dust and/or high albedo soils is in the classical bright region, Arabia. Most low albedo features in the region studied have red and violet albedos that are consistent with a dark substrate, such as basalt, coated by, or mixed with, a fine grained alteration product.

Mccord, T. B.↗

Application of thematic mapper-type data over a porphyry-molybdenum deposit in Colorado

The objective of the study was to evaluate the utility of thematic mapper data as a source of geologically useful information for mountainous areas of varying vegetation density. Much of the processing was done in an a priori manner without prior ground-based information. This approach resulted in a successfull mapping of the alteration associated with the Mt. Emmons molybdenum ore body as well as several other hydrothermal systems. Supervised classification produced a vegetation map at least as accurate as the mapping done for the environmental impact statement. Principal components were used to map zones of general, subtle alteration and to separate hematitically stained rock from staining associated with hydrothermal activity. Decorrelation color composites were found to be useful field mapping aids, easily delineating many lithologies and vegetation classes of interest. The factors restricting the interpretability and computer manipulation of the data are examined.

Rickman, D. L.↗

Characterization of potential sources of magnetic anomalies within the crust in a tectonically active region: Amphibolites and migmatites from Potrillo Maar, New Mexico

The purpose was to characterize the oxide mineralogy and petrology of samples collected from Potrillo Maar, New Mexico with the goal of explaining the magnetic anamoly that is observed over this region from remote sensing. Potrillo Maar is a diatreme that has brought rocks from all depths in the crust to the surface almost instantaneously. The samples are therefore thought to be representative of the crust as it exists today below this portion of the Rio Grande Rift. It is generally believed that oxide minerals (magnetite, hematite, etc.) are responsible for the magnetic signature of the crust. The samples from Portillo Maar therefore offer a unique opportunity to examine the magnetic mineralogy of the entire crust. The results indicate that the magnetic anamoly observed over Rio Grande Rift may be consequence of the tectonic activity that caused mylonitization of the rocks and allowed the infiltration of oxidizing fluids.

Spear, F. S.↗

A model for the biological precipitation of Precambrian iron-formation

A biological model for the precipitation of Precambrian iron formations is presented. Assuming an oxygen deficient atmosphere and water column to allow sufficient Fe solubility, it is proposed that local oxidizing environments, produced biologically, led to precipitation of iron formations. It is further suggested that spheroidal structures about 30 mm in diameter, which are widespread in low grade cherty rion formations, are relict forms of the organic walled microfossil Eosphaera tylerii. The presence of these structures suggests that the organism may have had a siliceous test, which allowed sufficient rigidity for accumulation and preservation. The model involves precipitation of ferric hydrates by oxidation of iron in the photic zone by a variety of photosynthetic organisms. Silica may have formed in the frustules of silica secreting organisms, including Eosphaera tylerii. Iron formates formed, therefore, by a sediment rain of biologically produced ferric hydrates and silica and other organic material. Siderite and hematite formed diagenetically on basin floors, and subsequent metamorphism produced magnetite and iron silicates.

Laberge, G. L.↗

Iron oxide and hydroxide precipitation from ferrous solutions and its relevance to Martian surface mineralogy

Experiments were performed to examine if the ubiquitousness of a weak magnetic component in all Martian surface fines tested with the Viking Landers can be attributed to ferric iron precipitation in aqueous solution under oxidizing conditions at neutral pH. Ferrous solutions were mixed in deionized water and various minerals were added to separate liquid samples. The iron-bearing additives included hematite, goethite, magnetite, maghemite, lepidocrocite and potassium bromide blank at varying concentrations. IR spectroscopic scans were made to identify any precipitates resulting from bubbling oxygen throughout the solutions; the magnetic properties of the precipitates were also examined. The data indicated that the lepidocrocite may have been preferentially precipitated, then aged to maghemite. The process would account for the presumed thin residue of maghemite on the present Martian surface, long after abundant liquid water on the Martian surface vanished.

Posey-Dowty, J.↗

Spectral characterization of Martian soil analogues

As previously reported, reflectance spectra of iron oxide precipitated as ultrafine particles, unlike ordinary fine grained hematite, have significant similarities to reflectance spectra from the bright regions of Mars. These particles were characterized according to composition, magnetic properties, and particle size distribution. Mossbauer, magnetic susceptibility, and optical data were obtained for samples with a range of concentrations of iron oxide in silica gel of varying pore diameters. To analyze the Mossbauer spectra, a versatile fitting program was enhanced to provide user friendly screen input and theoretical models appropriate for the superparamagnetic spectra obtained.

Agresti, David G.↗

Sample selection and preservation techniques for the Mars sample return mission

It is proposed that a miniaturized electron spin resonance (ESR) spectrometer be developed as an effective, nondestructivew sample selection and characterization instrument for the Mars Rover Sample Return mission. The ESR instrument can meet rover science payload requirements and yet has the capability and versatility to perform the following in situ Martian sample analyses: (1) detection of active oxygen species, and characterization of Martian surface chemistry and photocatalytic oxidation processes; (2) determination of paramagnetic Fe(3+) in clay silicate minerals, Mn(2+) in carbonates, and ferromagnetic centers of magnetite, maghemite and hematite; (3) search for organic compounds in the form of free radicals in subsoil, and detection of Martian fossil organic matter likely to be associated with carbonate and other sedimentary deposits. The proposed instrument is further detailed.

Tsay, Fun-Dow↗

Mineral mapping at Cuprite, Nevada with a 63-channel imaging spectrometer

Geophysical and Environmental Research Imaging Spectrometer (GERIS) 63-channel scanner data covering the spectral region 0.4 to 2.5 microns were analyzed for the Cuprite mining district, Esmeralda and Nye Counties, Nevada. Individual and spatially averaged spectra extracted from the GERIS data were used to identify the minerals alunite, kaolinite, buddingtonite, and hematite by their spectral characteristics. The images were classified in the spectral domain to produce color-coded image maps of mineral distribution that clearly show the zoned nature of the hydrothermal system. Comparison of the thematic mineral maps with existing geologic and alteration maps demonstrates the utility of imaging spectrometers for producing detailed maps for mineral exploration.

Kruse, F. A.↗

Imaging spectroscopy of Mars (0.4-1.1 micron) during the 1988 opposition

The paper presents imaging spectroscopic data and preliminary interpretations acquired during the 1988 perihelic opposition of Mars at the highest spatial resolution achieved from earth for spectrometric measurements (all contiguous spatial sampling for nearly 70 percent of the planet) and at a higher spectral resolution (R = 350) than most previous measurements in the (0.4-1.1)-micron wavelength range. Absorption features appearing near 0.6-0.7 and 0.80-0.95 micron are attributed to Fe(3+) crystal field transitions, confirming previously made measurements at lower spectral resolution. It is shown that attempts to reconcile the overall spectral shape with those of laboratory minerals or Mars analog soils spectra affirm the recent interpretations that hematite may account for nearly all of the 18 wt pct Fe2O3 measured by Viking Landers.

Bell, J. F., III↗

Mechanisms of ilmenite reduction and their impact on the design of effective reactor systems

One of the first activities at a lunar base could be oxygen recovery from ilmenite (FeTiO3). Oxygen produced from lunar soils could be used to fuel transportation vehicles operating in near-earth space. The first step in developing a suitable reactor system for lunar operation is to determine the mechanisms and rates of oxygen removal from ilmenite. In-situ gravimetric measurements and microscopic examinations were used to determine the hydrogen reduction mechanisms of synthetic ilmenite discs between 823 to 1353 K. A shrinking core reaction model, modified to account for the growth of an iron film on the surface of discs, was capable of predicting experimentally observed conversion-time relationships. The observed reduction mechanism, kinetic rates, and associated activation energy established a base line from which comparisons could be made to improve oxygen yield and removal rates. One proposed technique to improve the rate and extent of oxygen removal was to preoxidize ilmenite. Preoxidation is commonly used during the reduction of ilmenite ores in the iron industry and has been employed for many years to lower operating temperatures and increase reduction rates. This technology could prove beneficial for oxygen production facilities on the Moon as less massive reactor vessels and/or less energy could be associated with a process including preoxidation. X ray diffraction and energy dispersive spectroscopy were utilized to follow the progression of ilmenite oxidation at 1123 and 1140 K and the reduction of pseudobrookite (Fe2TiO5) at 873 and 973 K. Structures formed during the progress of oxidation were related to the system's phase diagrams. Results indicated that after initially producing ilmenite-hematite solutions and rutile (TiO2), pseudobrookite was the end product of oxidation at all temperatures examined (1049 to 1273 K). Initial results from the reduction of pseudobrookite indicate a series of phases are produced including ferropseudobrookite (FeTi2O5), ulvospinel (Fe2TiO4), and ilmenite. Rates of pseudobrookite reduction were typically 50 to 200 times that of ilmenite.

Briggs, R. A.↗

Reflectance spectroscopy of palagonite and iron-rich montmorillonite clay mixtures: Implications for the surface composition of Mars

Because of the power of remote sensing reflectance spectroscopy in determining mineralogy, it was used as the major method of identifying possible mineral analogs of the Martian surface. A summary of proposed Martian surface compositions from reflectance spectroscopy before 1979 was presented. Since that time, iron-rich montmorillonite clay, nanocrystalline or nanophase hematite, and palagonite were suggested as Mars soil analog materials.

Orenberg, J. B.↗

Comparison of Landsat Thematic Mapper and Geophysical and Environmental Research Imaging Spectrometer data for the Cuprite mining district, Esmeralda, and Nye counties, Nevada

Landsat TM images and Geophysical and Environmental Research Imaging Spectrometer (GERIS) data were analyzed for the Cuprite mining district and compared to available geologic and alteration maps of the area. The TM data, with 30 m resolution and 6 broadbands, allowed discrimination of general mineral groups. Clay minerals, playa deposits, and unaltered rocks were mapped as discrete spectral units using the TM data, but specific minerals were not determined, and definition of the individual alteration zones was not possible. The GERIS, with 15 m spatial resolution and 63 spectral bands, permitted construction of complete spectra and identification of specific minerals. Detailed spectra extracted from the images provided the ability to identify the minerals alunite, kaolinite, hematite, and buddingtonite by their spectral characteristics. The GERIS data show a roughly concentrically zoned hydrothermal system. The mineralogy mapped with the aircraft system conforms to previous field and multispectral image mapping. However, identification of individual minerals and spatial display of the dominant mineralogy add information that can be used to help determine the morphology and genetic origin of the hydrothermal system.

Kierein-Young, Kathryn S.↗

The origin of the White Beds below the Cretaceous-Tertiary boundary in the Gubbio section, Italy

This paper examines the origin of the 20-50-cm-thick set of whitish limestone beds found immediately underlying the Cretaceous-Tertiary (K-T) boundary in Umbrian sections. On the basis of isothermal remanent magnetization (IRM) acquisitions and thermal demagnetization experiments, it is argued that the white beds were deposited under the same conditions as the underlying pink beds and that the anomalously low IRM intensities found in the white beds resulted from the reduction of hematite in the originally pink beds followed by the removal of the Fe(2+) ions. The whitening of the beds is ascribed to the consequence of downward infiltration of reducing waters resulting from the large quantity of organic matter produced by the extinctions at the K-T boundary. The white interval below the K-T boundary is thus compatible with the hypothesis of impact-triggered mass extinction.

Lowrie, W.↗

Integration of visible-through microwave-range multispectral image data sets for geologic mapping

Multispectral remote sensing data sets collected during the Geologic Remote Sensing Field Experiment (GRSFE) conducted during 1989 in the southwestern U.S. were used to produce thematic image maps showing details of the surface geology. LANDSAT TM (Thematic Mapper) images were used to map the distribution of clays, carbonates, and iron oxides. AVIRIS (Airborne Visible/Infrared Imaging Spectrometer) data were used to identify and map calcite, dolomite, sericite, hematite, and geothite, including mixtures. TIMS (Thermal Infrared Multispectral Scanner) data were used to map the distribution of igneous rock phases and carbonates based on their silica contents. AIRSAR (Airborne Synthetic Aperture Radar) data were used to map surface textures related to the scale of surface roughness. The AIRSAR also allowed identification of previously unmapped fault segments and structural control of lithology and minerology. Because all of the above data sets were geographically referenced, combination of different data types and direct comparison of the results with conventional field and laboratory data sets allowed improved geologic mapping of the test site.

Kruse, Fred A.↗

Oxygen in the Martian atmosphere: Regulation of PO2 by the deposition of iron formations on Mars

During Earth's early history, and prior to the evolution of its present day oxygenated atmosphere, extensive iron rich siliceous sedimentary rocks were deposited, consisting of alternating layers of silica (chert) and iron oxide minerals (hematite and magnetite). The banding in iron formations recorded changes of atmosphere-hydrosphere interactions near sea level in the ancient ocean, which induced the oxidation of dissolved ferrous iron, precipitation of insoluble ferric oxides and silica, and regulation of oxygen in Earth's early atmosphere. Similarities between the Archean Earth and the composition of the present day atmosphere on Mars, together with the pervasive presence of ferric oxides in the Martian regolith suggest that iron formation might also have been deposited on Mars and influenced the oxygen content of the Martian atmosphere. Such a possibility is discussed here with a view to assessing whether the oxygen content of the Martian atmosphere has been regulated by the chemical precipitation of iron formations on Mars.

Burns, Roger G.↗

Mars: Compositional variability of ferric/ferrous minerals and polar volatiles from groundbased imaging spectroscopy

In an attempt to further constrain the ferric and ferrous mineralogy of Mars, Bell et al. (1989; 1990) obtained high resolution imaging spectroscopic data of much of the Martian surface in the visible and near-infrared (0.4-1.1 micron) during the 1988 opposition. Preliminary analysis of these data showed further evidence of crystalline hematite absorption features at 0.8-0.9 microns and 0.6-0.7 microns. Additionally, the 0.6-0.7 micron Fe(III) band was shown to vary across the surface, with a substantial correlation with albedo in the region studied. Calibration of this 1988 data set (along with a similar data set obtained during the 1990 opposition) has been ongoing, and some of the most recent results of the analysis of these data using linear spectral mixture modeling are reported.

Bell, James F., III↗