Search NASA⌕ Search

SEARCH · Search NASA

Results for “input device”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Generation and enhancement of surface acoustic waves on a highly doped p-type III-V semiconductor substrate

A device employing the generation and enhancement of surface acoustic waves on a highly doped p-type III-V semiconductor substrate (e.g., GaAs, GaSb, InAs, or InGaAs). The device includes two SiO 2 /ZnO islands, each including a SiO 2 buffer layer deposited on the doped p-type III-V semiconductor substrate and a ZnO layer deposited on the SiO 2 buffer layer. An input interdigital transducers (IDT) and an output IDT are each patterned on one of the SiO 2 /ZnO islands. The IDTs generates surface acoustic waves along an exposed surface of the highly doped p-type III-V semiconductor substrate. The surface acoustic waves improve the photoelectric and photovoltaic properties of the device. The device is manufactured using a disclosed technique for propagating strong surface acoustic waves on weak piezoelectric materials. Also disclosed is a photodetector developed using that technique.

Dong, Boqun↗
DOE OSTI2025

Determining the profitability of energy storage over its life cycle using levelized cost of storage

Levelized cost of storage (LCOS) can be a simple, intuitive, and useful metric for determining whether a new energy storage plant would be profitable over its life cycle and to compare the cost of different energy storage technologies. However, researchers and industry decision makers still use conflicting definitions of LCOS. For example, some include charging cost, while others only include round trip efficiency (RTE) losses. Additionally, inputs to the existing formulations are not specific enough to generate repeatable results across studies, which reduces trust in the metric. To push for standardization in economic assessment of batteries and other energy storage devices, the authors review existing definitions of LCOS and identify the desired characteristics for a standard. They then propose a new definition and demonstrate that it fits these characteristics very well relative to other prominent options. Unit analysis is applied to this proposed definition to provide a deeper understanding of the equations and to demonstrate its effectiveness. Finally, the sensitivity of LCOS to different input parameters is investigated to help users understand how to compare analyses from literature to their own. The authors also provide a spreadsheet and a Python script to streamline adoption of the proposed definition.

25 ENERGY STORAGE↗
NASA NTRS2004

Design of an Auto-zeroed, Differential, Organic Thin-film Field-effect Transistor Amplifier for Sensor Applications

Organic strain gauge and other sensors require high-gain, precision dc amplification to process their low-level output signals. Ideally, amplifiers would be fabricated using organic thin-film field-effect transistors (OTFT's) adjacent to the sensors. However, OTFT amplifiers exhibit low gain and high input-referred dc offsets that must be effectively managed. This paper presents a four-stage, cascaded differential OTFT amplifier utilizing switched capacitor auto-zeroing. Each stage provides a nominal voltage gain of four through a differential pair driving low-impedance active loads, which provide common-mode output voltage control. p-type pentacence OTFT's are used for the amplifier devices and auto-zero switches. Simulations indicate the amplifier provides a nominal voltage gain of 280 V/V and effectively amplifies a 1-mV dc signal in the presence of 500-mV amplifier input-referred dc offset voltages. Future work could include the addition of digital gain calibration and offset correction of residual offsets associated with charge injection imbalance in the differential circuits.

large-area electronics↗
DOE OSTI2015

Young’s modulus of [111] germanium nanowires

Our paper reports a diameter-independent Young’s modulus of 91.9 ± 8.2 GPa for [111] Germanium nanowires (Ge NWs). When the surface oxide layer is accounted for using a core-shell NW approximation, the YM of the Ge core approaches a near theoretical value of 147.6 ± 23.4 GPa. The ultimate strength of a NW device was measured at 10.9 GPa, which represents a very high experimental-to-theoretical strength ratio of ~75%. Furthermore, with increasing interest in this material system as a high-capacity lithium-ion battery anode, the presented data provide inputs that are essential in predicting its lithiation-induced stress fields and fracture behavior.

36 MATERIALS SCIENCE↗
NASA NTRS1970

Digital input is buffered to real-time analog display

Buffering technique utilizes nine-bit binary counter and holding register of eight flip-flops. These flip-flops form the memory device that allows precise asynchronous conversion of the digital source data. Counter generates a waveform which is passed through a low pass filter to recover data in analog form.

Bower, K. F.↗
NASA NTRS2011

Single Event Effects (SEE) Testing of Embedded DSP Cores within Microsemi RTAX4000D Field Programmable Gate Array (FPGA) Devices

Motivation for this work is: (1) Accurately characterize digital signal processor (DSP) core single-event effect (SEE) behavior (2) Test DSP cores across a large frequency range and across various input conditions (3) Isolate SEE analysis to DSP cores alone (4) Interpret SEE analysis in terms of single-event upsets (SEUs) and single-event transients (SETs) (5) Provide flight missions with accurate estimate of DSP core error rates and error signatures.

Perez, Christopher E.↗
NASA NTRS1993

Study of switching transients in high frequency converters

As the semiconductor technologies progress rapidly, the power densities and switching frequencies of many power devices are improved. With the existing technology, high frequency power systems become possible. Use of such a system is advantageous in many aspects. A high frequency ac source is used as the direct input to an ac/ac pulse-density-modulation (PDM) converter. This converter is a new concept which employs zero voltage switching techniques. However, the development of this converter is still in its infancy stage. There are problems associated with this converter such as a high on-voltage drop, switching transients, and zero-crossing detecting. Considering these problems, the switching speed and power handling capabilities of the MOS-Controlled Thyristor (MCT) makes the device the most promising candidate for this application. A complete insight of component considerations for building an ac/ac PDM converter for a high frequency power system is addressed. A power device review is first presented. The ac/ac PDM converter requires switches that can conduct bi-directional current and block bi-directional voltage. These bi-directional switches can be constructed using existing power devices. Different bi-directional switches for the converter are investigated. Detailed experimental studies of the characteristics of the MCT under hard switching and zero-voltage switching are also presented. One disadvantage of an ac/ac converter is that turn-on and turn-off of the switches has to be completed instantaneously when the ac source is at zero voltage. Otherwise shoot-through current or voltage spikes can occur which can be hazardous to the devices. In order for the devices to switch softly in the safe operating area even under non-ideal cases, a unique snubber circuit is used in each bi-directional switch. Detailed theory and experimental results for circuits using these snubbers are presented. A current regulated ac/ac PDM converter built using MCT's and IGBT's is evaluated.

Zinger, Donald S.↗
DOE OSTI2015

Narrowband Light Detection via Internal Quantum Efficiency Manipulation of Organic Photodiodes

Spectrally selective light detection is vital for full-colour and near-infrared (NIR) imaging and machine vision. This is not possible with traditional broadband-absorbing inorganic semiconductors without input filtering, and is yet to be achieved for narrowband absorbing organic semiconductors. We demonstrate the first sub-100 nm full-width-at-half-maximum visible-blind red and NIR photodetectors with state-of-the-art performance across critical response metrics. These devices are based on organic photodiodes with optically thick junctions. Paradoxically, we use broadband-absorbing organic semiconductors and utilize the electro-optical properties of the junction to create the narrowest NIR-band photoresponses yet demonstrated. In this context, these photodiodes outperform the encumbent technology (input filtered inorganic semiconductor diodes) and emerging technologies such as narrow absorber organic semiconductors or quantum nanocrystals. The design concept allows for response tuning and is generic for other spectral windows. Furthermore, it is materialagnostic and applicable to other disordered and polycrystalline semiconductors.

14 SOLAR ENERGY↗
DOE OSTI2025

Room‐Temperature Mid‐Infrared Detection Using Metasurface‐Absorber‐Integrated Phononic Crystal Oscillator

Mid-infrared (MIR) detectors find extensive applications in chemical sensing, spectroscopy, communications, biomedical diagnosis, and space exploration. Alternative to semiconductor MIR photodiodes and bolometers, mechanical-resonator-based MIR detectors show advantages in higher sensitivity and lower noise at room temperature, especially toward longer wavelength infrared. Here, uncooled room-temperature MIR detectors based on lithium niobate surface acoustic wave phononic crystal (PnC) resonators integrated with wavelength-and-polarization-selective metasurface absorber arrays are demonstrated. The detection is based on the resonant frequency shift induced by the local temperature change due to MIR absorptions. The PnC resonator is configured in an oscillating mode, enabling active readout and low-frequency noise. The 1-GHz oscillator-based MIR detector shows a relative frequency deviation of 5.24 × 10 −10 Hz −1/2 at an integration time of 50 µs, leading to an incident noise equivalent power of 197 pW Hz −1/2 when input 6-µm MIR light is modulated at 1.8 kHz, and a large dynamic range of 10 7 in incident MIR power. The device architecture is compatible with the scalable manufacturing process and can be readily extended to a broader spectral range by tailoring the absorbing wavelengths of metasurface absorbers.

Xi, Zichen [Virginia Polytechnic Inst. and State U↗
DOE OSTI2025

Design and Analysis of an Integral MPPT Control Law for Wave Energy Conversion Systems

In this paper, we propose an integral-based maximum power point tracking (MPPT) algorithm for point absorber wave energy conversion (WEC) systems. A permanent magnet synchronous generator (PMSG) is coupled to the point absorber and its drive implements the proposed MPPT control. While the rotating frame of reference of the PMSG implements power control, the slower mechanical frequency of the incident waves are processed with an additional transformation that yields another set of dc dynamics. The computed dc power in the new reference frame, which is focused on slow wave dynamics, is input to the MPPT control law that tunes the emulated resistance of the machine drive to extract peak power from the wave absorber device. We derive a stability condition for the proposed controller and validate our control design on a simulated 10kW system.

wave energy, maximum power point tracking (MPPT), ↗
DOE OSTI2021

GaAs Solar Cells Grown on Intentionally-Contaminated GaAs Substrates

III-V solar cells have the best performance of any semiconductor materials, but deposition of these materials relies on high-quality single crystal GaAs wafers for their superior performance. Unfortunately, the cost of these wafers makes these high-efficiency devices only accessible in high-value or niche markets. Here, we explored the effect of growing bulk GaAs crystals with lower purity input materials in order to reduce their cost. We observe that intentional impurities added to the melt before the crystal growth occurs segregate to the top of the boule. Single junction GaAs solar cells grown on wafers made from contaminated boules showed no performance degradation compared to a high-purity control wafer. These results suggest that lower purity Ga and As source materials can be used during crystal growth to reduce the cost of wafers.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2020

Novel High-Power Microwave Circulator Employing Circularly Polarized Waves

A novel four-port circulator is presented which uses an inline ferromagnetic element to allow for transmission or reflection depending on the sense of the incident circularly polarized wave. This configuration has been shown to reduce the dependency on ferrite anisotropy and support higher power, low rf loss, operation. An analytic analysis of this device is presented here alongside corroborating cold test data of the first prototype. High-power operation was performed at 2.856 GHz, with input power levels up to 8 MW for 3.5 μs in a pressurized nitrogen environment. The results from this research not only demonstrate ability to eliminate the use of greenhouse insulators, such as SF6, but also provide conceptual groundwork for a new class of ultrahigh power (50 MW+) nonreciprocal networks including circulators, isolators, phase shifters, and rf switches.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

A Subterahertz Multiplier Based on a Traveling Wave Tube with a Sheet Electron Beam

In this paper, we present the results of the study of a multiplier based on a traveling wave tube with a sheet electron beam and slow-wave double-grating structures. Device configurations with the possibility of obtaining an output power above 60 W at the second harmonic frequency of 190 GHz with an input power of about 10 W at the first harmonic frequency were determined.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Control System for RF OPM

SAND2025-01910O This software built in LabVIEW FPGA provides experimental control of the RF OPM prototype via a reconfigurable NI I/O card. It samples the analog input, processes it on the FPGA in real time, and generates control and feedback outputs to control and optimize the operation of the device. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Bainbridge, Jonathan↗
DOE OSTI2020

Probing Coherent States of Light and Matter in Two-Dimensional Semiconductors. Final Report

The ability to enhance light-matter interactions in engineered optical environments is well-established in micro- and nano-photonics. New classes of materials bring new rich correlations between spin, momentum, and light polarization that can be exploited in these photonic systems for information processing and low-power electronics. Interfacing these novel material features with strong optical interactions suggests the compelling capability to create hybrid light-matter systems harnessing low-energy and protected material properties such as spin. The long-term objective of this program was to investigate the interplay between pseudospin in 2D materials and light, revealing new coherent phenomena. The materials studied are the monolayer transition metal dichalcogenides (TMDs), which support polarization-sensitive optical transitions when isolated to a single sub-nanometer crystal layer in thickness. In particular, monolayer TMD semiconductors such as MoS 2 exhibit degenerate valleys in momentum space with distinct spin character. These valleys can be separately addressed by circularly polarized light, providing a tool for manipulation. Integrating this valley pseudospin of excitons in monolayer TMDs with engineered strong optical excitations to create novel coherent phenomena was a key long-term goal of this research. The scope of this research primarily focused on studying light-matter interactions of valley-sensitive excitations in monolayer TMDs. The scope also included the integration of monolayer materials that support valley-polarized emission into photonic devices. This approach extends prior work on exciton-polaritons in 2D materials toward a platform with far more control and improved light input and output characteristics to aid scalability of these polarization-sensitive phenomena to many-body, long-range optical networks. During the course of the five-year Early Career program, the approaches led to successful progress on each proposed aim. Initial successful work seeded additional research that developed from the main themes, while this program focus evolved toward coherent manipulation of valley polaritons and integration with photonics. Both of these advanced topics set the stage for new capabilities in future innovative research. The results of this project provide advances in materials and methods relevant for new visions of opto-electronics and photonics that can improve information processing in an era of increased focus on quantum and coherent phenomena. The research has also contributed to the training of two postdoctoral scholars and five graduate students.

2D Materials↗
DOE OSTI2020

Dynamic Instructions for Nuclear Power Plant Field Workers

Most tasks conducted at a nuclear power plant are guided by a procedure in one way or another. Some tasks must be conducted by strictly adhering to the prescribed steps, while other tasks use the procedures as a reference guide. Traditionally, the procedure process in the nuclear industry has been paper heavy. In recent years however, the nuclear industry has considered adopting more dynamic solutions to improve the efficiency of their work management process, advance human and system performance, as well as reduce the cost of handling paper copies of documentation. As a first step, many nuclear utilities in the U.S. deployed solutions that electronically route the documents through the review and approval processes and where the worker in the field uses an electronic copy of the instruction or procedure on a handheld device. These electronic copies are very similar to the format of the paper instruction but do have some additional capabilities to capture recorded input and notes.

47 OTHER INSTRUMENTATION↗
NASA NTRS1974

Signal-to-noise ratios in coherent soft limiters

Expressions for the output signal-to-noise power ratio of a bandpass soft limiter followed by a coherent detection device are presented and discussed. It is found that a significant improvement in the output signal-to-noise ratio (SNR) at low input SNR's can be achieved by such soft limiters as compared to hard limiters. This indicates that the soft limiter may be of some use in the area of threshold extension. Approximation methods for determining output signal-to-noise spectral densities are also presented.

Lesh, J. R.↗