Search NASA⌕ Search

SEARCH · Search NASA

Results for “model parameterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

AgMIP Regional Integrated Assessment of Agricultural Systems in Nioro, Senegal: Representative Agricultural Pathways, Climate, Crop and Economic Datasets

This paper describes the datasets that were used to implement an AgMIP Regional Integrated Assessment for the Nioro region of Senegal to assess the potential impacts of climate change on the principal agricultural system in the Senegal peanut basin and to assess adaptations of that system to climate change under current as well as future climate and socio-economic conditions. This dataset includes the Representative Agricultural Pathways developed for Nioro from 2000-2050; the climate data that were used to implement crop yield simulations; the data that were used to parameterize the DSSAT and APSIM crop models, including historical climate data and future climate scenarios; and the data that were used to parameterize the Tradeoff Analysis Model for Multi-dimensional Impact Assessment (TOAMD) economic simulation model, as well as simulated model outputs.

AgMIP↗
DOE OSTI2025

Mechanisms in Regulating the Quasi‐Biennial Oscillation in Exascale Earth System Model Version 2

Abstract The update to the deep convection parameterization in the energy exascale Earth system model version 2 (E3SMv2) makes the simulated quasi‐biennial oscillation (QBO) have a shorter period than without the update when other tunable parameters the same since the update makes convection more intense but less frequent while leaving the time‐mean convective heating tendency almost unchanged. Amplitudes of momentum fluxes of parameterized gravity waves (GWs) are intensified since they are determined by the square of convective heating tendency. In addition, stronger planetary waves are simulated in E3SMv2 with the convection scheme update, partially due to the tropospheric precipitation change. Furthermore, there is evidence that planetary waves are intensified in the stratosphere due to the dissipation of enhanced parameterized GWs. These factors are found to be responsible for modulating the QBO simulated in E3SMv2.

Li, Yuanpu [Climate and Global Dynamics Division U↗
DOE OSTI2024

A simple model for short-range ordering kinetics in multi-principal element alloys

Short-range ordering (SRO) in multi-principal element alloys influences material properties such as strength and corrosion. While some degree of SRO is expected at equilibrium, predicting the kinetics of its formation is challenging. We present a simplified isothermal concentration-wave (CW) model to estimate an effective relaxation time of SRO formation. Estimates from the CW model agree to within a factor of five with relaxation times obtained from kinetic Monte Carlo (kMC) simulations when above the highest ordering instability temperature. Further, the advantage of the CW model is that it only requires mobility and thermodynamic parameters, which are readily obtained from alloy mobility databases and Metropolis Monte Carlo simulations, respectively. The simple parameterization of the CW model and its analytical nature makes it an attractive tool for the design of processing conditions to promote or suppress SRO in multicomponent alloys.

36 MATERIALS SCIENCE↗
NASA NTRS1992

Adaptive defuzzification for fuzzy systems modeling

We propose a new parameterized method for the defuzzification process based on the simple M-SLIDE transformation. We develop a computationally efficient algorithm for learning the relevant parameter as well as providing a computationally simple scheme for doing the defuzzification step in the fuzzy logic controllers. The M-SLIDE method results in a particularly simple linear form of the algorithm for learning the parameter which can be used both off- and on-line.

Yager, Ronald R.↗
NASA NTRS2013

Impacts of Disturbance History on Forest Carbon Stocks and Fluxes: Merging Satellite Disturbance Mapping with Forest Inventory Data in a Carbon Cycle Model Framework

Forest carbon stocks and fluxes are highly dynamic following stand-clearing disturbances from severe fire and harvest and this presents a significant challenge for continental carbon budget assessments. In this work we use forest inventory data to parameterize a carbon cycle model to represent post-disturbance carbon trajectories of carbon pools and fluxes for specific forest types growing in high and low site productivity class settings. We then apply these trajectories to landscapes and regions based on forest age distributions derived from either the FIA data or from Landsat time series stacks (1985-2006) for 54 representative scenes throughout most of the conterminous United States. We estimate the net carbon uptake in forests caused by post-disturbance growth and decomposition ("regrowth sink") for forested regions across the country. At the landscape scale, the prevailing condition of positive net ecosystem productivity (NEP) is in stark contrast to local patches with large sources, particularly in the west where fires and clear cuts create contiguous disturbed patches. At the continental scale, regional differences in disturbance rates reflect management patterns of high disturbance rates in the Southeastern and South Central states, and lower disturbance rates in the Northeast and Northern Lakes States. Despite low contemporary disturbance rates in the Northeast and Northern Lakes States (0.61 and 0.74% y(exp −1)), the regrowth sink there remains of moderate to large strength (88 and 57 g C m(exp −2) y(exp −1)) owing to the continued legacy from historical clearing. Large regrowth sinks are also found in the Southeast, South Central, and Pacific Southwest regions (85, 86, and 95 g C m(exp −2) y(exp −1)) where disturbance rates also tend to be higher (1.59, 1.38, and 0.93% y(exp −1)). Overall, the Landsat-derived disturbance rates are elevated relative to FIA-derived rates (1.19 versus 0.93% y(exp −1)) particularly for western regions. The differences only modestly adjust regional- and continental-scale carbon budgets, reducing NEP from forest regrowth by about 8%.

carbon↗
DOE OSTI2024

Data Imbalance, Uncertainty Quantification, and Transfer Learning in Data‐Driven Parameterizations: Lessons From the Emulation of Gravity Wave Momentum Transport in WACCM

Abstract Neural networks (NNs) are increasingly used for data‐driven subgrid‐scale parameterizations in weather and climate models. While NNs are powerful tools for learning complex non‐linear relationships from data, there are several challenges in using them for parameterizations. Three of these challenges are (a) data imbalance related to learning rare, often large‐amplitude, samples; (b) uncertainty quantification (UQ) of the predictions to provide an accuracy indicator; and (c) generalization to other climates, for example, those with different radiative forcings. Here, we examine the performance of methods for addressing these challenges using NN‐based emulators of the Whole Atmosphere Community Climate Model (WACCM) physics‐based gravity wave (GW) parameterizations as a test case. WACCM has complex, state‐of‐the‐art parameterizations for orography‐, convection‐, and front‐driven GWs. Convection‐ and orography‐driven GWs have significant data imbalance due to the absence of convection or orography in most grid points. We address data imbalance using resampling and/or weighted loss functions, enabling the successful emulation of parameterizations for all three sources. We demonstrate that three UQ methods (Bayesian NNs, variational auto‐encoders, and dropouts) provide ensemble spreads that correspond to accuracy during testing, offering criteria for identifying when an NN gives inaccurate predictions. Finally, we show that the accuracy of these NNs decreases for a warmer climate (4 × CO 2 ). However, their performance is significantly improved by applying transfer learning, for example, re‐training only one layer using ∼1% new data from the warmer climate. The findings of this study offer insights for developing reliable and generalizable data‐driven parameterizations for various processes, including (but not limited to) GWs.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1984

A dynamical basis for the parameterization of organized deep convection in large-scale numerical models

A hierarchy of steady, nonlinear, semianalytic models of different types of convection were produced. These provide a theoretical framework for determining cloud outflow fluxes of both dynamic and thermodynamic quantities, which can be used to formulate dynamical transports in parameterization schemes. This was achieved by exploiting certain Lagrangian conservation properties of steady flow, from which an equation for the vertical displacement of particles can be obtained and the outflow entropy, energy and momentum fluxes and the infow/outflow mass fluxes can be determined from solution to the equation. These fluxes are determined in terms of grid scale parameters such as convective available potential energy (CAPE), cloud layer shear, and horizontal pressure gradients. Five main types of system models are identified, respectively representing archtypes of convection in zero shear, large shear, midlatitude squall lines, tropical squall lines and cellular convection. The downdraught is an important aspect in the first four of these and the cloud scale transport of momentum is very distinctive.

Moncrieff, M. W.↗
DOE OSTI2025

Evaluating Mean State Cloud Properties in the Simple Cloud‐Resolving E3SM Atmosphere Model (SCREAM)

Accurately simulating clouds remains a key challenge in global climate models, primarily because cloud formation involves sub-grid processes that are parameterized and crudely represented in models. This study examines the performance of DOE's Simple Cloud-Resolving Energy Exascale Earth System (E3SM) Atmosphere Model (SCREAM) in simulating cloud properties and their spatio-temporal distribution by comparing against satellite observations. Two horizontal resolutions of SCREAM (3 and 12 km) are examined, and both depict a realistic spatial structure of mean-state cloud cover but underestimate its global mean magnitude. SCREAM 3 km reasonably reproduces the distribution of mean-state cloud properties across various cloud optical thickness and cloud-top pressure regimes, with performance comparable to CMIP5 and CMIP6 ensemble and marginally outperforming SCREAM 12 km. Still, SCREAM 3 km tends to underpredict low clouds and optically thin clouds, highlighting the need for continued improvement in representing unresolved processes. This study provides a basis for confidence in the representation of clouds in SCREAM, as simulating mean-state clouds is a necessary prerequisite for trusting its cloud responses to changes in aerosols and greenhouse gases.

Geosciences↗
NASA NTRS1994

Reanalysis of X-ray emission from M87. 2: The multiphase medium

In a previous paper, we showed that a single-phase model for the gas around M87 simultaneously explained most available X-ray data. Total enclosed masses derived from the model, however, fell well below the determinations from optical measurements. In this paper, we consider possible solutions to the inconsistency, including two multiphase medium models for the gas and the consequences of systematic errors of the Einstein Focal Point Crystal Spectrometer (FPCS). First, we find that when constraints from optical mass determinations are not considered, the best-fit model to the X-ray data is always the single-phase model. Multiphase models or consideration of FPCS systematic errors are required only when optical mass constraints are included. We find that the cooling time model of White & Sarazin adequately explains the available X-ray data and predicts total masses which agree with optical measurements. An ad hoc power-law multiphase does not. This shows both that the existence of mass dropping out of the ambient phase is consistent with the data and that the cooling-time model gives a reasonable parameterization of the dropout rate. Our derived mass accretion rate is similar to previous determinations. The implications of this result for cluster mass determinations in general are discussed. We then consider 'self absorbing' models where we assume that material dropping out of the ambient medium goes completely into X-ray absorbing gas. The resulting internal absorption is small compared to Galactic absorption at most radii. The models are therefore indistinguishable from models with only Galactic absorption. We finally show that it is alternatively possible to simultaneously fit optical mass measurements and X-ray data with a single-phase model if some of the observed FPCS line fluxes are too high by the maximum systematic error. This possiblity can be checked with new data from satellites such as ASCA.

Tsai, John C.↗
DOE OSTI2024

Yet Another Discriminant Analysis (YADA): A Probabilistic Model for Machine Learning Applications

This paper presents a probabilistic model for various machine learning (ML) applications. While deep learning (DL) has produced state-of-the-art results in many domains, DL models are complex and over-parameterized, which leads to high uncertainty about what the model has learned, as well as its decision process. Further, DL models are not probabilistic, making reasoning about their output challenging. In contrast, the proposed model, referred to as Yet Another Discriminate Analysis(YADA), is less complex than other methods, is based on a mathematically rigorous foundation, and can be utilized for a wide variety of ML tasks including classification, explainability, and uncertainty quantification. YADA is thus competitive in most cases with many state-of-the-art DL models. Ideally, a probabilistic model would represent the full joint probability distribution of its features, but doing so is often computationally expensive and intractable. Hence, many probabilistic models assume that the features are either normally distributed, mutually independent, or both, which can severely limit their performance. YADA is an intermediate model that (1) captures the marginal distributions of each variable and the pairwise correlations between variables and (2) explicitly maps features to the space of multivariate Gaussian variables. Numerous mathematical properties of the YADA model can be derived, thereby improving the theoretic underpinnings of ML. Validation of the model can be statistically verified on new or held-out data using native properties of YADA. However, there are some engineering and practical challenges that we enumerate to make YADA more useful.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1978

Documentation of a ground hydrology parameterization for use in the GISS atmospheric general circulation model

The moisture transport processes related to the earth's surface relevant to the ground circulation model GCM are presented. The GHM parametrizations considered are: (1) ground wetness and soil parameters; (2) precipitation; (3) evapotranspiration; (4) surface storage of snow and ice; and (5) runout. The computational aspects of the GHM using computer programs and flow charts are described.

Lin, J. D.↗
NASA NTRS1990

A scheme for parameterizing cirrus cloud ice water content in general circulation models

Clouds strongly influence th earth's energy budget. They control th amount of solar radiative energy absorbed by the climate system, partitioning the energy between the atmosphere and the earth's surface. They also control the loss of energy to space by their effect on thermal emission. Cirrus and altostratus are the most frequent cloud types, having an annual average global coverage of 35 and 40 percent, respectively. Cirrus is composed almost entirely of ice crystals and the same is frequently true of the upper portions of altostratus since they are often formed by the thickening of cirrostratus and by the spreading of the middle or upper portions of thunderstorms. Thus, since ice clouds cover such a large portion of the earth's surface, they almost certainly have an important effect on climate. With this recognition, researchers developing climate models are seeking largely unavailable methods for specifying the conditions for ice cloud formation, and quantifying the spatial distribution of ice water content, IWC, a necessary step in deriving their radiative characteristics since radiative properties are apparently related to IWC. A method is developed for specifying IWC in climate models, based on theory and measurements in cirrus during FIRE and other experiments.

Heymsfield, Andrew J.↗
NASA NTRS1994

Numerical modeling studies of wake vortex transport and evolution within the planetary boundary layer

The proposed research involves four tasks. The first of these is to simulate accurately the turbulent processes in the atmospheric boundary layer. TASS was originally developed to study meso-gamma scale phenomena, such as tornadic storms, microbursts and windshear effects in terminal areas. Simulation of wake vortex evolution, however, will rely on appropriate representation of the physical processes in the surface layer and mixed layer. This involves two parts. First, a specified heat flux boundary condition must be implemented at the surface. Using this boundary condition, simulation results will be compared to experimental data and to other model results for validation. At this point, any necessary changes to the model will be implemented. Next, a surface energy budget parameterization will be added to the model. This will enable calculation of the surface fluxes by accounting for the radiative heat transfer to and from the ground and heat loss to the soil rather than simple specification of the fluxes. The second task involves running TASS with prescribed wake vortices in the initial condition. The vortex models will be supplied by NASA Langley Research Center. Sensitivity tests will be performed on different meteorological environments in the atmospheric boundary layer, which include stable, neutral, and unstable stratifications, calm and severe wind conditions, and dry and wet conditions. Vortex strength may be varied as well. Relevant non-dimensional parameters will include the following: Richardson number or Froude number, Bowen ratio, and height to length scale ratios. The model output will be analyzed and visualized to better understand the transport, decay, and growth rates of the wake vortices. The third task involves running simulations using observed data. MIT Lincoln Labs is currently planning field experiments at the Memphis airport to measure both meteorological conditions and wake vortex characteristics. Once this data becomes available, it can be used to validate the model for vortex behavior under different atmospheric conditions. The fourth task will be to simulate the wake in a more realistic environment covering a wider area. This will involve grid nesting, since high resolution will be required in the wake region but a larger total domain will be used. During the first allocation year, most of the first task will be accomplished.

Lin, Yuh-Lang↗
NASA NTRS2008

Evaluation and Assimilation of Cloud Cleared Radiances for AIRS in GEOS-5

The use of clear (cloud-free) channels for AIRS in GEOS-5 had shown positive impact on forecast skills in both hemispheres. However, improvements in forecast skills due to the assimilation of AIRS data are less impressive since the number of assimilated channels from AIRS is much larger than that from other Infrared sounders such as HIRS-3 onboard NOAA 15-17 satellites. This limitation of AIRS radiance data to improve the forecast skill is mainly due to the fact that channels capable of peaking below clouds are not used in the assimilation and yet those have highest vertical resolving capability of AIRS instrument are concentrated in the lower troposphere. On average, the percentage of AIRS footprints completely clear for all channels is less than 10%. The percentage of assimilated AIRS channel radiances however ranges from 100% for channels peaking in the upper stratosphere, above the cloud, to no more that 5% in the lower atmosphere due to cloud contamination. Our current ability to model and predict clouds accurately in global model, and to fully characterize and parameterize optical properties of cloud particles in radiative transfer model are the two major obstacles prohibiting us to use cloudy radiance directly in the assimilation. To further improve forecast skill using AIRS data, we ought to use the channels peaking below the clouds in the troposphere, which can be accomplished by assimilating cloud-cleared radiance. The cloud-cleared radiance data for AIRS used in this study were obtained from optimal cloud clearing procedures developed by researchers at CIMSS of University of Wisconsin at Madison to retrieve clear column radiances for all AIRS channels by collocating multi-band MODIS IR clear radiance observations with the AIRS cloudy radiances on a single footprint basis. Two adjacent AIRS cloudy footprints are used to retrieve one AIRS cloud-cleared radiance spectrum and no background information (first guess) is needed. To assimilate the cloud-cleared radiance data, the errors of the cloud-cleared radiances need to be addressed. The details of convolving AIRS radiances with MODIS spectral response function and comparison with MODIS-measured cloud-free radiance will be presented. The range of errors of cloud-cleared radiances for AIRS using collocated MODIS clear and near-by AIRS clear data will be shown. The NASA. global data assimilation model, GEOS-5, is used to evaluate and assimilate the cloud-cleared radiance for AIRS. The residues between the cloud-cleared brightness temperature and the simulated brightness temperature from background (i.e., OMFs) will be investigated. The quality control procedures will be documented based on error estimation and the OMFs. Finally, the impacts between assimilation of clear channel radiances and cloud-cleared radiances will be addressed.

Liu, Hui-chun↗
NASA NTRS2016

WRF-Chem Simulations of Lightning-NOx Production and Transport in Oklahoma and Colorado Thunderstorms Observed During DC3

The focus of this analysis is on lightning-generated nitrogen oxides (LNOx) and their distribution for two thunderstorms observed during the Deep Convective Clouds and Chemistry (DC3) field campaign in May-June 2012. The Weather Research and Forecasting Chemistry (WRF-Chem) model is used to perform cloud-resolved simulations for the May 29-30 Oklahoma severe convection, which contained one supercell, and the June 6-7 Colorado squall line. Aircraft and ground-based observations (e.g., trace gases, lightning and radar) collected during DC3 are used in comparisons against the model-simulated lightning flashes generated by the flash rate parameterization schemes (FRPSs) incorporated into the model, as well as the model-simulated LNOx predicted in the anvil outflow. Newly generated FRPSs based on DC3 radar observations and Lightning Mapping Array data are implemented in the model, along with previously developed schemes from the literature. The results of these analyses will also be compared between storms to investigate which FRPSs were most appropriate for the two types of convection and to examine the variation in the LNOx production. The simulated LNOx results from WRF-Chem will also be compared against other previously studied mid-latitude thunderstorms.

Lightning↗
NASA NTRS1992

Heterogeneous conversion of N2O5 to HNO3 on background stratospheric aerosols - Comparisons of model results with data

The effects of heterogeneous processing by a parameterized lower stratospheric sulfate aerosol layer on model calculations were examined using a 2D photochemical model. Model results were compared with zonally averaged LIMS data on HNO3 and NO2 and in situ measurements of NO, NO(y), and ClO, taken by the ER-2 aircraft. The results obtained are contradictory: some comparisons favor heterogeneous chemistry, and some do not. It is suggested that the assumptions made to parameterize the sulfate aerosol chemistry result in a rate of heterogeneous processing that is too vigorous.

Considine, David B.↗